Drywall Screw Phillips Bugle Head SCT Black Phosphate 3.5 x 25mm Bulk 1000

Drywall Screw Phillips Bugle Head SCT Black Phosphate 4.2 x 100mm Bulk 500

These Forgefix Pozidriv, round head Corrugated Roofing Screws are Zinc plated for increased corrosion resistance. They come complete with a specially designed plastic fold over cap to suit installation of corrugated roofing. The plastic cap has a large surface area to improve weather resistance. Screw size: 5.0 x 50mm (Pozi). APPLICATIONSuitable for fixing corrugated sheeting to timber sub frames. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrates surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45 to the slots for the driver. Round heads have a flat under head surface making the screw ideal for laying flat on sheet material of all types, reducing deformation.

Carcass Screw Pozi SCT Black Phosphate 4.2 x 45mm Box 200

Carcass Screw Pozi SCT Black Phosphate 4.2 x 32mm Box 200

Drywall Screw Phillips Bugle Head SCT Black Phosphate 3.5 x 50mm Box 200

Drywall Screw Phillips Bugle Head SCT Black Phosphate 3.5 x 45mm Box 200

Drywall Screw Phillips Bugle Head SCT Black Phosphate 3.5 x 42mm Box 200

Drywall Screw Phillips Bugle Head SCT Black Phosphate 4.2 x 75mm Box 100

Drywall Screw Phillips Bugle Head SCT Black Phosphate 4.2 x 65mm Box 100

Drywall Screw Phillips Bugle Head SCT Black Phosphate 4.2 x 100mm Box 100

Drywall Screw Phillips Bugle Head SCT Black Phosphate 3.5 x 32mm Bulk 1000

Drywall Screw Phillips Bugle Head SCT Black Phosphate 3.5 x 38mm Box 200

Drywall Screw Phillips Bugle Head SCT Black Phosphate 3.5 x 32mm Box 200

Drywall Screw Phillips Bugle Head SCT Black Phosphate Finish 3.5 x 25mm Box 200

Weller W61D Controlled Temperature Iron is suitable for a broad range of demanding soldering applications on electrical components with extremely high heat sensitivity. The industrial soldering irons of the W series have a solidly constructed heating element and a wide selection of long-life soldering tips. The tips are made of pure copper and are available with temperature ratings of 260C, 316C, 425C and 480C. Temperature is controlled according to the Weller Magnastat principle. The metal cap that is firmly secured to the back of the soldering tip is the temperature sensor of this system; the Magnastat. The Magnastat system operates through a ferrous magnetic sensing device and is extremely stable, it does not deteriorate through ageing or metal fatigue. A further advantage of this design is that the soldering iron is completely switched off while the tip is being changed so that the heating element can not burn out in the absence of a tip. Specification: Watt: 60WVoltage: 230V

Weller W201D Controlled Temperature Iron is suitable for a broad range of demanding soldering applications on electrical components with extremely high heat sensitivity. The industrial soldering irons of the W series have a solidly constructed heating element and a wide selection of long-life soldering tips. The tips are made of pure copper and are available with temperature ratings of 260C, 316C, 425C and 480C. Temperature is controlled according to the Weller Magnastat principle. The metal cap that is firmly secured to the back of the soldering tip is the temperature sensor of this system; the Magnastat. The Magnastat system operates through a ferrous magnetic sensing device and is extremely stable, it does not deteriorate through ageing or metal fatigue. A further advantage of this design is that the soldering iron is completely switched off while the tip is being changed so that the heating element can not burn out in the absence of a tip. Specification: Watt: 200WVoltage: 230V

Weller W101D Controlled Temperature Iron is suitable for a broad range of demanding soldering applications on electrical components with extremely high heat sensitivity. The industrial soldering irons of the W series have a solidly constructed heating element and a wide selection of long-life soldering tips. The tips are made of pure copper and are available with temperature ratings of 260C, 316C, 425C and 480C. Temperature is controlled according to the Weller Magnastat principle. The metal cap that is firmly secured to the back of the soldering tip is the temperature sensor of this system; the Magnastat. The Magnastat system operates through a ferrous magnetic sensing device and is extremely stable, it does not deteriorate through ageing or metal fatigue. A further advantage of this design is that the soldering iron is completely switched off while the tip is being changed so that the heating element can not burn out in the absence of a tip. Specification: Watt: 100WVoltage: 230V

This Weller Solder Aid Tool Kit contains 6 double-ended tools that offer multi-functional capabilities. Use to bend and hold leads, remove dust and contamination, adjust pins and components, and many other necessary tasks. Experience precise and improved soldering with Weller's Solder Aid Kit.

This Weller Helping Hands Holder frees up your hands for improved soldering precision and flexibility. It has 4 magnetic gooseneck arms with alligator clamps that are easily positionable for multiple configurations.

The Weller 8100UDK Expert Soldering Gun Kit is an all-purpose gun that tackles cutting, sealing and soldering with instant heat, through interchangeable tips operated by fingertip trigger control from this instant heat gun that is ready to solder in 6 seconds. It has a high efficiency tip of pre-tinned pure copper and a built-in spotlight which illuminates work. Contains the following: 1 x 8100 Expert Soldering Gun 100W 240V1 x Coil of Multi-Purpose Solder1 x Cutting Tip1 x Smoothing Tip1 x Soldering Tip1 x Soldering Aid Tool1 x 24 Page Information Booklet with craft hints1 x Sturdy Compact Carrying Case Specification: Voltage: 230/240VInput Power: 100W PLEASE NOTE: This kit is now supplied in a black carry case not red.

The Stanley MR77 all-steel riveter has a head that rotates 360 for use at any angle. It has 4 nosepieces and a wrench store in its handle for versatility and convenient storage. It accepts 3, 4, and 5mm aluminium and steel rivets for a wide range of applications.

This Faithfull Heavy-Duty Short Arm Hand Riveter has an easy to use 4-in-1 dial head, this handy feature means that no nozzle change is required. For convenience, the riveter also has a built-in mandrel collector and a return spring for easy loading and ejecting. The riveter's handle is made of drop forged steel and its body is made from aluminium alloy with a steel insert. Its jaw is made from a high grade steel alloy. 5 year guarantee. Specification Rivet Type Accepted: Aluminium, Steel and Stainless SteelRivet Diameter: 3.2, 4.0, 4.8 and 6.4mm

The Faithfull Heavy-Duty Lazy Tong Riveter (concertina style) is a powerful riveting tool that can be used single-handedly without any loss of efficiency. Its lever action reduces the effort and force required to set rivets, allowing the tool to be used for longer periods of time with reduced user fatigue. This heavy-duty riveter features an aluminium alloy body with a three-jaw gripping action, steel fitments, nozzles and concertina rods with an ergonomic rear handle. The robust, durable construction is designed to withstand continuous and repetitive applications. Industrial grade, perfect for use in garages, coach works, boat building yards, agricultural machine workshops, construction and general maintenance workshops. Supplied complete with 5 interchangeable nozzles. Specification Rivet Type Accepted: Aluminium, Steel and Stainless SteelRivet Diameter: 2.4, 3.2, 4.0, 4.8 and 6.4mm

The Faithfull Heavy-Duty Long Arm Riveter requires 50% less force to operate than most other hand riveters. It has a lightweight, strong, aluminium body and reinforced, heat-treated steel handles for increased strength. The jaws are made from hard-wearing chrome molybdenum steel for longer life. Fitted with a built-in mandrel collector, ideal for prolonged use This ergonomically designed riveter is extremely strong and due to a unique patented design. The shock-proof design minimises vibration whilst the ergonomic handle offers comfort and ease of use. This industrial grade tool is perfect for use in garages, coachworks, boat building yards, agricultural machine workshops and general maintenance workshops. Supplied with five interchangeable nozzles, that can be conveniently stored in the handle. Specification Rivet Type Accepted: Aluminium, Steel and Stainless SteelRivet Diameter: 2.4, 3.2, 4.0, 4.8 and 6.4mmLength: 400mm (16in)Weight: 1.2kg

This Faithfull Heavy-Duty Riveter has a 360 rotating head that will allow for the application of rivets in restricted spaces and difficult locations. The jaws are made from hard wearing chrome molybdenum steel for longer life. It has a lightweight yet strong aluminium body with built-in spare nozzle storage. The soft-grip handle offers user comfort and storage for the nozzle spanner. Ideal for use in automotive applications, mudguards, license plates, metal repairs, etc. Specification Rivet Type Accepted: Aluminium, Steel and Stainless SteelRivet Diameter: 2.4, 3.2, 4.0 and 4.8mmLength: 280mm (11in)

The Arrow RK6120 Rivet Pack has an assortment of sizes and types of rivets. The pack of 120 is capable of bonding materials that staples and glue cannot touch. The RK6120 is used for safe, solid and secure joining of metal parts. Contents: 25 - 1/8in Short Aluminium Rivets.20 - 1/8in Medium Aluminium Rivets.15 - 1/8in Long Aluminium Rivets.25 - 1/8in Short Steel Rivets.20 - 1/8in Medium Steel Rivets.15 - 1/8in Long Steel Rivets.

These Forgefix Spring Head Nails are a popular roofing nail for corrugated roofing. Their twisted shank assists in absorbing movement that may occur in the roofing construction. They are galvanised for increased resistance to corrosion. APPLICATION:Galvanised spring head nails are most commonly used for securing corrugated sheeting and other roofing materials.Can be used with a rubber or plastic spat washer. Galvanisation is process of applying a protective zinc coating to steel in order to prevent rusting. Zinc coatings prevent corrosion of the protected metal by forming a physical barrier, and by acting as a sacrificial anode even if this barrier is damaged.

These Tacwise 16G Angled Finish Nails, 63mm, are galvanised and ready for use in nailers and pinners. They are compatible with the DEWALT DC618, Paslode IM250A and IM65A F16 Nailers, plus all other brand nailers that take 16G angled nails. Specifications: Size: 63mm.Pack Quantity: 2500.

The Tacwise 16 gauge Straight Finish Nails 32mm come in a pack of 2500. They are compatible with: Tacwise Air Powered Nailers: DFN50, DFN50WHH and FFN64LHH.Tacwise Battery Powered Nailers: Ranger 2 16G Nailer.And all other nailers that take 16g straight finish nails. Specifications: Size: 32mm. Pack Quantity: 2500.

The Stanley Tools FatMax Lightweight Composite Hammer Tacker has a blended nylon composite housing that is both lightweight and durable, for long-lasting use. Fitted with an overmould grip for prolonged use and a drop in bottom loading for easy reloading. There is also a fastener reload indicator for ease of use. Fires: Heavy-Duty Staples: 6-14mmLight-Duty Staples: 6-14mmNarrow Crown Staples: 10-14mm18G Brad Nails: 15mm

The Rapid R64E Combi Tacker has a high capacity dual magazine for firing both fine wire staples and brads. It is suitable for securing insulation materials, plastic sheeting, cardboard, fitted carpets, mouldings, beading and frames etc. The all-steel wear parts inside ensure strength and durability. The tacker has an ergonomic design and recoilless feature that ensures it is comfortable to use. It has a locking function for safe storage. The force is adjustable with a maximum setting for long staples or hard material, and the tacker has built in, patented brad control to ensure accuracy. Compatible with Rapid No.140 flat wire staples 6-14mm which have a larger holding area against the material and 15mm No 8 brads. Made in Sweden and comes covered by a 3 year guarantee. Fires:Flat wire staples: Type 140 6mm-14mm.Brads: No.8 (300) 15mm.

The Rapid R311 is a professional, heavy-duty hammer tacker which is ideal for roofing felt, insulation, carpet underlay and plastic foils. The unique patented opening mechanism allows fast reloading of staples from the base. The magazine is opened with just a light push on the button. The comfortable grip and perfect balance gives excellent results with minimal effort and the all steel, heavy-duty construction ensures strength and durability. The tacker is compatible with Rapid No.140 flat wire staples 6-12mm which have a larger holding area against the material. It also has a reversible staple driver so that when one side wears down, the other side can be put in place. Its large protective plate minimises damage to the base material. Fires flat wire staples - Type 140 6mm to 12mm. Covered by a 2 year guarantee.

The Rapid R19 Hammer Tacker is a small and lightweight hammer tacker that is ideal for roofing, wall panels and fast attachment of labels and posters. It is suitable for use with Rapid No. 13 fine wire staples 4-6 mm and has a single-handed, ergonomic grip for easy operation. The bottom staple loading mechanism has no loose parts making it quick and easy to reload. The all-steel construction makes this hammer tacker reliable and durable, while the non-slip handle ensures accuracy. Fires fine staples - Type 13 4mm to 6mm. 2-year guarantee.

The Rapid MS2.1 2-in-1 Manual Staple Gun is ideal for decoration or do-it-yourself work around the house. It is a highly flexible staple gun that can tackle both standard and cable stapling with confidence. Efficiently organise all of your tangling low-voltage cables like speaker cables or decorative lights and with a simple switch you can also use standard staples for textiles, canvas and other fibred materials as well as fine wood trim around the house. Features include a 2-step force adjuster that can be set to reflect different types of material and the length of staple being used and a see-through staple indicator which shows when staples run out. Bottom loading and with an easy to clear jam removal, this dual staple gun is compatible with Rapid No. 53 fine wire staples 6-12mm and Rapid No. 7 Cable Staples 12-14mm. The ergonomic and lightweight design makes the MS2.1 simple and efficient to work with for all. Covered by a 3 year guarantee.

The Rapid M10R Tacker is ideal for lighter decoration and hobby work and fires fine wire staples that are barely visible and have minimal effect on the textile fibres. It is compatible with Rapid No. 53 fine wire staples size 4-8 mm and is recoilless for comfort and long-term use. Covered by a 2-year guarantee. Rapid 'Fun to Fix' tools are ergonomically designed and suitable for smaller hands. Supplied with 2 starter strips of 6mm staples.Fires: Type 53 Fine Wire Staples: 4-8mm.

The Faithfull sleek heavy-duty aluminium tacker featuring a unique Triggershot action that can be selected when placing staples in hard to reach places and is ideal for single-handed use when flush stapling or when precise positioning is required. Additional features include force adjustment, an easy drop-in loading system with a reload indicator and a built-in handle lock for easy storage. Accepts: Staples No.4: 6-14mm.Brad Nails No.8: 14mm.Pin Nails No.9: 14mm.

A truly versatile 6-in-1 tacker that accepts the full range of Faithfull staples, pin and nails. This compact, lightweight tacker has a high impact ABS body with a metal firing handle. Additional features include force adjustment, easy drop-in loading system with a reload indicator and a built-in handle lock for easy storage. Accepts: Staples No.3: 4-10mm.Staples No.4: 6-14mm.Fine Wire Staples No.13: 8mm.Round Crown Staples No.7: 10mm.Brad Nails No.8: 14mm.Pin Nails No.9: 14mm.

The Arrow JT27 is the great choice for occasional DIY users looking for a dependable, yet economical, fine wire stapler. It has a convenient bottom load magazine with pinch release that makes reloading and clearing jams hassle-free.The handle lock secures the handle against the tool frame, making this compact and convenient tool easy to store safely anywhere. The staple viewing window indicates when staples are running low.Made of all steel construction with a double chrome finish, the JT27 is light duty and ideal for general repairs, crafts, upholstery and decorating. The Arrow fires JT21 staples: 6, 8 and 10mm.

The Link2Home Fixed Wall Mount for Flat Panel TVs is so aesthetically pleasing and compact that it looks like part of your TV. Easy to install on any type of wall, no studs required, and compatible with unlimited VESA/universal mounting options for all Flat Panel TVs up to 68kg. With the auto-locking safety mechanism, the TV mount can be secure without the use of pull tabs, screws, or strips.

These Forgefix Worktop Clamps eliminate the need for surface mounted worktop joining strips. The nut is tightened onto the bolt, pressing the caps against the walls of the 35mm diameter holes.The clamps are Zinc plated for increased resistance to corrosion. APPLICATION:Worktop joints. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrates surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.

These Forgefix Pipe Support Posts are used in conjunction with single cliplock or open pipe clips. They snap in at the base of the clip and effectively raise the clip by 25mm. This additional clearance allows lagging to be fitted around the pipe. Further support posts can be stacked to accomodate thicker lagging. APPLICATION:It is essential the correct length of screw is used: ensure that the fixing screw used can pass through the pipe clip, the support post and then fully expand the length of the fixing plug.Pipe Support Post 22mm Box 100

The Master Lock Pre-Assembled Spring Clamp Tie-Down is simple and easy to use. Adjust the length of the strap by using the easy to use push button. It has 2 x S-hooks with security clips that keep the strap attached to the anchor points even when it's not under tension. The strap trap™ will secure the excess strap during the transportation of the load and store the strap easily when not in use.

These Faithfull Ratchet Tie-Downs are manufactured from a 25mm wide triple layer Terylene webbing which is weatherproof, cut and abrasion resistant. The ratchet and S-style hooks ensure that loads are secured quickly and efficiently and provide ease of use. Manufactured in accordance to EN12195-2. Specification: Length: 5mWidth: 25mmBreaking Strain: 600kg/daNMaximum Working Load: 300kg/daN NOTE: WEIGHT OF CARGO MUST NOT EXCEED THE WORKING LOAD LIMIT Pack quantity: 4.

This Faithfull Ratchet Tie-Down is manufactured from 25mm wide triple layer Terylene webbing which is weatherproof, cut and abrasion resistant. The ratchet and S-style hooks ensure that loads are secured quickly and efficiently and provide ease of use. The tie downs meet the following specifications: Length: 5m.Width: 25mm.Breaking Strain: 600kg/daN.Maximum Working Load: 300kg/daN.Quantity: 2 Piece. Manufactured in accordance to EN12195-2.NOTE: WEIGHT OF CARGO MUST NOT EXCEED THE WORKING LOAD LIMIT

This Faithfull Ratchet Tie-Down is manufactured from a 32mm wide triple layer Terylene webbing which is weatherproof, cut and abrasion resistant. The ratchet and J style hooks ensures that loads are secured quickly and efficiently and provide ease of use. The tie downs meet the following specifications: Length: 5m.Width: 32mm.Breaking Strain: 1320kg/daN.Maximum Working Load: 660kg/daN.Quantity: 2 Piece. Manufactured in accordance to EN12195-2.NOTE: WEIGHT OF CARGO MUST NOT EXCEED THE WORKING LOAD LIMIT

The BlueSpot Ratchet Tie-Down Straps are designed for quick and easy securing and transporting of cargo. They are ideal for cars, trucks, boats, bikes and trailers. They feature a quick thumb release mechanism for easy adjustment and removal of strap. With vinyl coated S-hooks, metal buckle and wide nylon webbing that provides a secure hold without scratching. Specification Length: 4.5m.Width: 25mm.Load Capacity: 225kg.Breaking Strength: 450kg.

SMJ Dual Voltage Shaver Socket with 115V and 240V sockets that are suitable for shavers and electric toothbrushes. Wide circular terminals for ease of wiring. Complete with decorative screws secured to backplate. ASTA tested and approved to BS1363.1 x SMJ Dual Voltage Shaver Socket Brushed Steel

Thompson's Emergency Leak Fix is a high-performance clear sealant, which seals and repairs virtually any exterior surface, providing a long-lasting, highly durable waterproof repair. The unique formulation adheres to most surfaces, even in damp conditions, to form a waterproof seal that remains flexible over time protecting against cracking and splitting. Ideal for sealing doors and windows, the unique formula has been developed to be over-painted with solvent-based or water-based paints and stains. Usage Areas: wood, painted surfaces, glass, PVCu, plastics, brickwork, stone, roof felt, slate, tile and zinc.

This Thompson's Emergency Roof Repair Mastic has been developed from technology used on North Sea oil rigs, Thompson's Emergency Roof Repair Mastic is a trowel applied mastic with the ability to adhere to virtually any roofing material even underwater. With added fibres and a high solids content, Thompson's Emergency Roof Repair Mastic has been developed for filling, plugging and repairing cracks and splits, targeting leaks at the source of the problem. Thompson's Emergency Roof Repair Mastic is an all-weather solution, its hydrophobic formula actively repels and displaces water during and after application instantly forming a watertight seal that does not require time to cure before it delivers full weatherproofing protection. It will adhere to virtually any material even under water and is suitable for use on flashings, gutters, roof lights and valleys.Coverage: 0.17m per litreSize: 750mlColour: Black

This Thompson's Emergency Instant Repair spray is a specially formulated, sprayable mastic that immediately seals and repairs water leaks on a variety of roofing materials. Suitable for use in adverse weather conditions the formula displaces moisture ensuring a watertight bond with virtually any roofing material. The unique thickening system immediately structures on contact ensuring gaps and cracks are filled and repaired giving instant protection against water ingress. Developed to flex with the natural movement of the substrate Thompson's Emergency Instant Repair resists cracking and splitting ensuring protection against future leaks. Suitable for use on leaking roofs, guttering, pipes and drains and on caravans, garden sheds and greenhouses. Suitable for use on tile, slate, metal, asphalt, felt, wood and plastic.Size: 450gColour: Black

This Thompson's TDSB5L Drive Seal is a high-performance acrylic coating specifically designed to enhance the appearance of tarmac drives and obliterate existing stains. Its quick drying formulation means that the drive can be back in use in as little as 4 hours. Once dry Thompson's Drive Seal reaches its optimum performance after a few days and gives an attractive, low sheen, slip resistant finish which provides unrivalled protection from weather damage and prevents oil and petrol spills leaving unsightly stains on the surface. For maximum performance ensure all surfaces are clean and free from any dust or loose material that may interfere with the adhesion of Thompson's Drive Seal. Remove dirt, moss, lichen, dust or loose material by brushing with a stiff bristle brush. Use Thompson's Oil Drive Cleaner to remove existing oil/grease deposits and to clean driveways prior to application. Thompson's Drive Seal can be applied by long pile roller to damp, but not saturated surfaces. Using a roller tray, load the roller fully and apply in an even coat ensuring all irregularities are covered. 6m/L per coat depending on the porosity of the substrate.Size: 5 litres.Colour Black.Slip ResistantDrive over in 4 Hours

The ROCOL EASYLINE Edge Applicator is a revolutionary line marking paint applicator that produces sharp, long-lasting lines. It produces line widths anywhere between 50 and 100mm. Quick to assemble and simple to use, no additional equipment or knowledge required. Adjustable rear wheels allow line marking close to walls and racks as well as the NEW feature to paint curved lines. Suitable for internal and external use. Specifically designed for use with Aerosol EASYLINE Edge Paint. Supplied with: 1 x Heavy-Duty Storage Case, 1 x Battery and 2 x Sets of Masking Plates and 1 x Pointer Guide.

Everbuild Resiblock Trade is a water-based, all purpose, matt sealer that is suitable for concrete and clay block paving, flag paving and most forms of natural stone. It is an ideal alternative for sealing block paves when lower cost is required.

The Everbuild Opti-Mix Cement Colourant is a one-shot cement colourant that enables accurate colour matching and consistency between different batches of mortar. Fast colouring formulation. Easy-to-use, controlled dosage which is less messy than powder. 1 litre is equivalent to 5 litres of standard product.

Everbuild 209 Liquid Mortar Tone is formulated to provide a permanent colour to all types of mortars, rendering, concrete and pointing. Light fast pigments, that will not fade. Improves workability/trowelability, contains a plasticiser. Reduces bleeding/segregation and inhibits efflorescence. The liquid disperses evenly throughout the mix to give uniform shade for each mix batch. Shading can be adjusted to provide a wide variety of colour depths. Chloride free, chloride ion content <0.1%.

Everbuild Integral Liquid Waterproofer is a liquid additive that provides long term water protection to mortar, concrete and rendering. It helps to reduces water permeability and is suitable for all applications where resistance to water absorption is necessary such as pool and tank linings, roof areas, external rendering and pointing and structures below ground level. Tested to BSEN934-Part 3. Areas of Use:- Waterproofing below ground; basements etc.- Waterproofing above ground; mortar, render, screeds etc.- Waterproofing the linings of water tanks/silage pits/ponds

Everbuild 505 Plasterer's GRIPCOAT is specifically designed to provide an improved key to smooth surfaces. Contains a fine aggregate that provides a mechanical key to backgrounds such as plaster, concrete, painted surfaces, textured surfaces and ceramic tiles. One coat application, coloured blue to indicate coverage.

Everbuild 409 Block Guard has a long-lasting acrylic based formula that dries clear. Designed to bind jointing sand and form a durable seal over block paving and other mineral paver/flags. It penetrates deeply into pavers and jointing sand, and then cures by solvent evaporation. Helps facilitate easier cleaning. Contains a powerful fungicide to help prevent the growth of mould, fungus or weeds. Areas for use: - Block paved drives and pathways- Natural stone patio areas- Cement based flagstones Specification: Size: 5 litreCoverage: Average 2m per litreDrying Time: 3-4 hours, between coats

Everbuild Aquaseal Liquid Roof is an easy-to-use, all weather roofing system which is ideal for waterproofing any flat or pitched roofs. Aquaseal Liquid Roof creates a solid, waterproof membrane that covers the entire surface area without any seams. It is a ready-to-use, polyurethane-based product that can be applied cold. Aquaseal Liquid Roof is ideal for use on roof areas for new projects, extensions or to refurbish an existing, leaky roof. It offers excellent adhesion to both porous and non-porous substrates. Colour: Slate GreySize: 7kg

Everbuild 201 Mortar Admix is an air entraining plasticiser that replaces lime in the mix. Provides an easy to work, 'butter like' consistency to the mortar. It also prevents shrinkage, cracking and crazing during setting. For use in brick laying and plastering mortars. Helps to improve frost resistance and long term resistance to freeze-thaw cycles when set. Tested to BSEN934-Part 3. Areas of Use:- Load bearing brickwork- Block laying- External/Internal rendering- Pointing/repointing brickwork

Everbuild Black Jack 908 D.P.M. is a ready-to-use, odourless, rubber enriched bitumen emulsion that provides a highly effective sandwich damp-proof membrane for floors. It also acts as a waterproofer for walls, above ground structures and foundations. It can also be used as an adhesive for wood block, mosaic panels, insulation boards, expanded polystyrene, cork and as a plaster bonding agent, even on difficult surfaces. Suitable for internal and external use.

Everbuild 401 Brick and Patio Cleaner is a fast-acting, acid-based formula (9.5% strength) that dissolves mortar and cement stains and ingrained dirt and paint on most mineral surfaces such as brick, stone, concrete, flagstone and earthenware. Size: 5 litre

Forgefix Dog Tooth Washers are mainly used with Carriage Bolts, where timber to timber connections are required. The teeth bite in to the timber, offering a no movement fastening.The washers are Zinc Plated for increased corrosion resistance. APPLICATIONUsed in many joints where restricted movement is required such as Roofing Joists, Newall posts on decking etc.Can be used with many types of bolts and fasteners, in particular Carriage Bolts. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrates surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers. Dog Tooth Washer ZP 50 x 12mm Box 100

Polyvine Cascaphen 2-Part Wood Glue has been specially developed for waterproof exterior use. It can also withstand continuous immersion in water. Developed for the marine industry this is the only completely waterproof adhesive that will withstand continual immersion in water. Ideal for: laminating, marine, garden furniture and gates, laminated plastics, preservative treated and difficult timber, and expanded polystyrene.

Loctite Glue Remover for the removal of superglue and many other glues from badly bonded objects, stained surfaces, fabric and accidentally bonded fingers. Has a non-drip formula that is clean, quick and easy. Ideal for badly bonded items, accidental spillage, ink-marker stain remover and freeing bonded skin. Size: 5g

Gorilla Superglue Micro Precise keeps holding strong, even when the bond takes a hit. Just hold in place for 10-45 seconds whilst the formula sets, no clamping necessary. It has an anti-clog cap that provides precise application exactly where you need it. Suitable for use on nearly anything: wood, metal, ceramics, some plastics, rubber and much more.

The Everbuild STICK2 All-Purpose Superglue Tube is a high strength universal glue that can fill gaps up to 0.1mm. It can also bond non-porous surfaces such as plastics, metals, PVCu, rubber, ceramics and much more. The superglue is quick drying and forms an instant bond in just 1 minute. Size: 3g.

Everbuild Smart Tack is an advanced spray bonding system that outperforms and outdates conventional contact adhesives, providing significant performance and time-saving application benefits. Supplied in a standard aerosol can for smaller jobs and tricky areas such as edging, mitred joints etc. Offers the benefits of the smart tack system with lower pressure application. Based on new technology resins, providing very fine strands of 'high solids' adhesive that forms a web type pattern on application. Can be used for a multitude of uses in the shopfitting, furniture manufacture, laminating, joinery and exhibition industries. Size: 500ml.

Contractors PVA is a multi purpose agent, primer sealer, cement filler and plaster admixture that adheres to most common building and DIY materials except PVC and rubber. Ideal for priming unsound surfaces prior to plastering or painting, as an adhesive on wood, cork, textiles and most applications where at least one surface is porous, for general dust sealing on flaking paintwork/walls etc. and as a cement admixture. NOTE - for areas subject to constant damp, use Everbuild SBR Bond which is water resistant.

Bondloc B2012 is a 2-part, rapid cold curing epoxy adhesive, that is suitable for bonding a wide variety of surfaces including steel, aluminium and galvanised iron. Reacts within a few minutes to give a tough, resilient bond on a wide variety of surfaces. Specifications: Mix Ratio: 1:1Work Life: As a mix: 4 1/2 - 5 minutesSize: 25ml Part 1 Physical Form: Viscous liquidChemical Type: EpoxyAppearance: ClearViscosity 25C: 100 poiseSpecific Gravity: 1.17 Part 2 Physical Form: Viscous liquidChemical Type: Mercaptan and PolyamideAppearance: ClearViscosity 25C: 130 poiseSpecific Gravity: 1.14

Bondloc B2001 is a hand kneadable, specialty epoxy putty that mixes for permanent repairs to many substrates. Contains fading black dye that becomes grey after mixing. May be applied under water (fresh or salt). Bonds to fibreglass, metal, wood, concrete and glass. Will not yellow to UV exposure. Hardens in 10 minutes, back in service in an hour, full strength in 24 hours. Can be used for repairing tanks and drums, patching holes in pipes, stopping leaks and repairing porosity holes in castings. Specification: Typical Properties: 7 days cured at 24CColour: Black, changes to grey after mixingViscosity: putty/hand kneadablePot Life @24C: 20 minutesComprehensive Strength: 83 N/mm2Adhesive Tensile Shear: 5 N/mm2Cured Hardness Shore: D 75Dielectric Strength: volts/mil 300Solids: 100%Temperature Resistance: Wet: 49C, Dry: 121CSize: 50g

Bondloc B574 is an Instant Gasket material that forms in place, making almost any size and shape, replacing paper, cork etc. It eliminates relaxation and on loads loss. The assembled parts are usually suitable for immediate Low Pressure ( 6 bar) service and once cured can resist 350 Bar Pressure depending on gap size. Suitable for all formed in place applications such as gear box sealing, pump flanges, transmission assemblies, cover plates on tanks, cam shaft sealing, bearing gaps, outer housings, crank case and sump assemblies and flange pipe fittings. Specifications: Resin: Dimethacrylate.Colour: Orange paste.Cure speed with Activator: 10 mins.Cure speed without Activator: 15-30 mins.Viscosity - Brookfield Sp3 @ 20rpm: 50,000cps.Gap Fill/Max Threadform: 0.5mm/M36.Flash Point: >100C.Shelf Life: 12 months @ 20C.Specific Gravity: 1.10.Max operating temperature: -55C to 150C. Cured Performance: Full Cure Time: 24 hours @ 20C.Breakloose Strength: 8N.m.Static Shear Strength: 10N.m. Size: 50ml.

Bondloc B572 White Pipe Seal is designed for the locking and sealing of metal pipes and fittings. The product cures when confined in the absence of air between close fitting metal surfaces and prevents loosening and leakage from shock and vibration. The thixotropic nature reduces the migration of liquid product after application to the substrate. Has a good chemical/solvent resistance to Ethanol, Motor Oil, Unleaded Petrol and Brake Fluid. B572 is unusual in that it does not fully cure until some 60 hours after application, allowing for re-alignment of elbows and joints. Replaces tapes and dopes, stops gas and fluid leaks on most metals and assists in lubricating during assembly. Will not shred or tear which would contaminate your system. Use it to seal against oils, gases, chemicals, water and steam etc. Specifications: Resin: Dimethacrylate.Colour: White paste.Cure speed with activator: Not recommended.Cure speed Without Activator: up to 60 hours.Viscosity Brookfield Sp3 @ 20rpm: 20,000cps.Gap fill / Max threadform: 0.4 mm / M36.Flash Point: >85C.Shelf Life: 36 months @ 20C. Specific Gravity: 1.25.Max Operating Temperature: -55C to 150C. Cured Performance: Full Cure Time: 60 hours.Typical breakaway strength: 6 N.m.Typical prevailing strength: 2 N.m. Size: 50ml.

Bondloc B480 is a black rubber toughened Cyanoacrylate that bonds metals, plastics, wood, ceramics, rubber, leather, card, glass and many other materials. Cyanoacrylate adhesives cure through reaction with moisture held on the surface to be bonded. They need close fitting joints and usually solidify in seconds which has resulted in the universal generic name of 'Superglues'. Curing is started by the film of moisture found on most surfaces which is usually slightly alkaline and it is this alkalinity which causes the polymerisation. Most grades have varying viscosities and therefore they need close fitting joints. Newer developments of gelled variants allow cure in wider gaps and application to vertical surfaces. Cyanoacrylates are suited to small plastic parts and to rubber bonding. Liquid Properties:Ester base: Ethyl cyanoacrylateAppearance: Black Opaque LiquidSpecific Gravity: 25C 1.06 g/cmShelf life: 6 months unopenedViscosity @ 25C: 350 - 450 mPasSize: 20g

Bondloc B454 is a Thixotropic Non-Drip Gel Cyanoacrylate that bonds metals, plastics, wood, ceramics, rubber, leather, card, glass and many other materials. Cyanoacrylate adhesives cure through reaction with moisture held on the surface to be bonded. They need close fitting joints and usually solidify in seconds which has resulted in the universal generic name of 'Superglues'. Curing is started by the film of moisture found on most surfaces which is usually slightly alkaline and it is this alkalinity which causes the polymerisation. Most grades have varying viscosities and therefore they need close fitting joints. Newer developments of gelled variants allow cure in wider gaps and application to vertical surfaces. Cyanoacrylates are suited to small plastic parts and to rubber bonding. Liquid Properties:Ester base: Ethyl cyanoacrylateAppearance: Clear, colourlessSpecific Gravity: 25C 1.1 g/cmShelf life: 12 months unopenedViscosity @ 25C: GelSize: 20g

Bondloc B415 is a high viscosity Cyanoacrylate that bonds metals, plastics, wood, ceramics, rubber, leather, card, glass and many other materials. Cyanoacrylate adhesives cure through reaction with moisture held on the surface to be bonded. They need close fitting joints and usually solidify in seconds which has resulted in the universal generic name of 'superglues'. Curing is started by the film of moisture found on most surfaces which is usually slightly alkaline and it is this alkalinity which causes the polymerisation. Most grades have varying viscosities and therefore they need close fitting joints. Newer developments of gelled variants allow cure in wider gaps and application to vertical surfaces. Cyanoacrylates are suited to small plastic parts and to rubber bonding. Liquid Properties: Ester base: Ethyl cyanoacrylateAppearance: Clear, colourlessSpecific Gravity: 25C 1.06 g/cmShelf life: 12 months unopenedViscosity @ 25C: 1200 - 1800 Size: 20g

Bondloc B406 is a very Low Viscosity Cyanoacrylate that bonds metals, plastics, wood, ceramics, rubber, leather, card, glass and many other materials. Liquid Properties: Ester base: Ethyl cyanoacrylateAppearance: Clear, colourlessSpecific Gravity: 25C 1.06 g/cmShelf life: 12 months unopenedViscosity @ 25C: 25 - 35 mPas Size: 20g

Unibond No More Nails is a high strength grab adhesive that eliminates the need for nails and screws in many DIY and repair jobs. It is safe and easy-to-use, adheres to most building materials and can be used to fill minor gaps on uneven surfaces. No More Nails is ideal for fixing skirting boards, dado rails, architraves, coving, polystyrene mouldings, decorative wall panels, plasterboard, carpet and carpet grippers and worktops. Dries translucent.1 x Unibond No More Nails Invisible Cartridge 285g

Unibond No More Nails Exterior is a high strength adhesive that eliminates the need for nails and screws in many DIY and repair jobs. It provides one of the strongest initial grabs available from Unibond, for un-paralleled support for heavier objects. It is extremely versatile and adheres to most building materials. Dries white. Suitable for exterior use.

Pinkgrip Dry Fix is a revolutionary new type of fast curing, adhesive foam that has been specially developed for the rapid installation of Plasterboard, Insulation Boards and other sheet materials such as Roof Decking and Floorboards. Pinkgrip Dry Fix provides significant labour saving and convenience benefits when compared to traditional dry wall adhesives. It will bond to most common building substrates; can be applied horizontally or vertically to boards, walls or battens/beams. The foam expands very minimally on application but enough to fill any gaps on uneven surfaces. Pinkgrip Dry Fix can be applied using an Everbuild Dry Fix Applicator Gun.

Everbuild Maximum Torque Adhesive is the ultimate high grab building adhesive. The unique polymer blend gives incredible initial grab, typically double that of most grab adhesives on the market today, eliminating the need for temporary support in most applications. It has the ability to bond basically everything to anything in virtually all conditions, even under water or in the rain. Cures to form a tough flexible elastic rubber, which also makes it suitable for use as a sealant.

Everbuild Clear Fix is a clear hybrid polymer grab adhesive that has the ability to bond just about everything in both interior and exterior applications. With added UV stabilisers to ensure the product doesn't yellow over time, Clear Fix is the ideal choice for applications where the colour of the product may be seen. Clear Fix is a versatile product which can be used in almost every application - even when immersed under water! It is quick curing, resistant to temperature extremes, over-paintable and totally water and weatherproof. Size: 290ml.Colour: Clear.

Pinkgrip is a revolutionary direct bond adhesive specifically formulated for the professional user, using polymers at the leading edge of adhesive technology. Pinkgrip will stick just about anything on a building site that needs sticking. Its amazing grabbing strength not only removes the need to pin under the work piece to prevent slumping, but its revolutionary initial Direct Bond eliminates the need for double stick methods. Pinkgrip can be used inside and outside and adheres to just about every building substrate, providing the following key benefits: - Enhanced slump resistance for quick and simple direct bonding to most substrates without the use of temporary supports in most applications. - Excellent early and ultimate adhesive strength on porous substrates. - Excellent gap filling properties to accommodate uneven surfaces. - Good nip off qualities to prevent messy stringing of the adhesive Size: 350ml cartridge.

The Everbuild Instant Nails is a high strength, solvent-free, gap filling multi use adhesive that provides a quick grab and replaces mechanical fixings in many home improvement applications. Dries white and may be overpainted if required. Instant Nails should be at room temperature when you begin using the product. If Instant Nails has been stored in cool conditions it should be placed in a warm room/bucket of warm water before use to gently heat up to working temperature. Do NOT apply Instant Nails at temperatures below4C.

The Rapid EG340 Glue Gun is designed for pro-industrial users who need a powerful glue gun for high intensity use that works with different type of glues. It is ideal for use on PVC, for sealing cables and tiles, electronics and electrics, furniture and wood, manual carton sealing, trade exhibits and decoration. The EG340 is equipped with a heater system of 220 watts, a very accurate, low effort 4-finger soft grip trigger mechanism allowing the best ratio pressure/transfer into the melting chamber and a soft grip handle for high comfort. It can be used for both low and high temperature 12mm diameter glue sticks and the temperature is adjustable from 120 to 220C, the temperature settings are 120C, 145C, 170C, 195C and 220C. The high glue output of 1400g/hour is ideal for intensive use and the 2-minute heating time ensures it is ready to use when needed. Interchangeable nozzles (available to purchase separately) and an adjustable stand allow this glue gun to be used for all types of jobs. Comes with a 2-year guarantee. SpecificationInput Power: 220W.Working Voltage: 220V-240V.Heating time 1 min at 130 C, 3 min at 210 CTemperature Settings: 120/145/170/195/220C.Glue Output: 35g/min - 1400gr/hour.Glue Stick Diameter: 12mm.Regulation: Mechanical Thermostat.Nozzle: 3.0 mm, exchangeableCord Length: 2.5m.Supplied with a fixed and a mobile stand

Loctite Rear View Mirror Bonder is a unique system for bonding rear-view mirrors and all window mounted aerials. Supplied as a single shot pack, that bonds in 30 seconds with no need for liquid activators. Ideal for any glass to metal application. Size: 0.5ml

The Loctite 60 Second All Purpose Glue has a colourless, ultra-thick gel formula that prevents dripping and bonds all materials within 60 seconds. Objects are repositionable for up to 40 seconds. It builds up a strength of100kg/cm2 within 24 hours. The glue will bond to most materials, porous and non-porous, as well as flexible materials and objects exposed to stress. It is ideal for larger applications thanks to its tailored formula and its bigger tube.

Loctite All Purpose Adhesive is a quick drying clear glue that's an ideal household adhesive for those unforeseen repairs. Sets in minutes, is transparent and is particularly suitable for use on fabrics, card, cork, felt and most plastics.

Unibond Repair Metal is a reactive, fast setting 2-component, non-shrinking, non-expanding epoxy based adhesive supplied as a twin chamber syringe. Ideal for strong bonding, fixing and replacing of metals/stone such as steel, cast iron, copper, aluminium, brass, concrete, bricks, ceramics and marble. Also suitable for bonding most metals/stone to other common surfaces such as wood, leather, metal, glass, ceramics and most plastics. (NB: Not suitable for bonding polypropylene (PP), polyethylene (PE) and PTFE or for repairing items that will be in direct contact with food or drink). Sets in 5 minutes, with an ultimate strength up to 130Kg/cm2. Metallic grey in colour when set. Can be sanded, painted or drilled once set. It is heat-resistant between -30 C and 150 C, water, oil and common solvent resistant and will withstand rough handling. For interior and exterior use.

The UniBond Epoxy Repair Plastic is a 2-part water-resistant epoxy adhesive that sets solid in 5 minutes. Ideal for strong quick bonding and repairing of most plastics. Can be sanded, drilled and painted. Designed to be workable for 4 minutes while the bond is being created, allowing for the adhesive to be repositioned into the correct position. It is temperature and water-resistant, meaning it is ideal for internal but also external use, perfect for repairing items such as garden chairs. Will bond plastic to a wide variety of materials including leather, metal, glass, ceramics and most woods. For best results, lightly sand surfaces prior to bonding. Make sure that surfaces are clean, dry and completely free from dust, dirt, rust, oil, grease, polish and moisture.

Sylglas Plumber Fix is purpose designed as a permanent leak sealant for piping and tanks and can be used on most materials EXCEPT soft plastic materials. Ideal for sealing weeping, sweating and burst metal pipes, radiators, tanks and cylinders. Plumber Fix is a 2-part epoxy (with resin and hardener of differing colours so that when kneaded together, complete mixing is easily observed) that hardens to form a strong, waterproof, self-adhesive seal.

The Evo-Stik Epoxy Control is an extra strong, long-lasting bonding agent that can be repositioned up to 2 hours after the initial application. It takes about 16 hours to completely set, depending on the ambient conditions. Ideal for large areas and assembling a number of components on metal, wood, masonry, ceramics, glass and most hard plastics.Two tubes, one hardener the other resin. Spatula and tray included for mixing.

The Araldite Repair Epoxy Bar is a hard, long-lasting, solvent-free multipurpose repair putty that is waterproof and can be drilled, filled, painted or sanded. Ideal for bonding or sealing, it will cope with uneven surfaces and is highly recommended for wet applications on metal pipes, tanks and gutters. It will even hold a repair where you are re-joining parts with stripped threads. Araldite Repair putty is a real ally for the serious DIY enthusiast and repairman! If you do need a smooth surface finish this can be simply achieved using a damp cloth before hardening. Simply activate Araldite Repair putty by kneading it like dough, and it is recommended that you wear gloves. Bonds to most materials. Recommended for metal pipes, tanks, radiators, tools and equipment, guttering and stripped threads. Sets in wet conditions. Water, oil, chemical and impact resistant. High-temperature resistance (-40C to 120C).

The Araldite Standard Epoxy Syringe is a strong, solvent-free adhesive suitable for all materials, ideal for durable bonding and repairs. Perfect for complicated jobs that require adjustment thanks to a long working time. It has a long working time with parts positionable for around 80 minutes, so is ideal for projects and complicated heavy-duty work on metals, wood, masonry, ceramics, glass, dry concrete, chipboard, leather, card, fabrics, rubber and many plastics. It achieves a full ultra-strong bond in around 14 hours and when used in line with the instructions printed on the pack will give you dependable, long-lasting results. Bonds metal, wood, masonry, ceramics, glass, dry concrete, chipboard, leather, cardboard, fabric, rubber and most plastics (except polyethylene, polypropylene, Teflon). The 2-component epoxy with long 'working time'. Parts repositionable for 80 minutes. Oil, chemical and impact resistant. High-temperature resistance (-30C to 80C). Withstands rough handling.

The Araldite Standard Epoxy is a strong, solvent-free adhesive suitable for all materials, ideal for durable bonding and repairs. Perfect for complicated jobs which require adjustment thanks to a long 'working time'. It has a long working time with parts positionable for around 80 minutes, so is ideal for projects and complicated heavy-duty work on metals, wood, masonry, ceramics, glass, dry concrete, chipboard, leather, card, fabrics, rubber and many plastics. It achieves a full ultra-strong bond in around 14 hours and when used in line with the instructions printed on the pack will give you dependable, long-lasting results. Bonds metal, wood, masonry, ceramics, glass, dry concrete, chipboard, leather, cardboard, fabric, rubber and most plastics (except polyethylene, polypropylene, Teflon). 2-component epoxy with long 'working time'. Parts repositionable for 80 minutes. Oil, chemical and impact resistant. High temperature resistance (-30C to 80C). Withstands rough handling. Do not use to repair or bond items that will contact food or drink.

This Everbuild EVBSILEAT Silicone Eater is a revolutionary chemical that removes all types of silicone sealant by digesting and breaking up the sealant. Everbuild Silicone Eater is harmless to most surrounding surfaces and can be used to remove sealant from baths, kitchen worktops, basins, showers, doors and window frames etc.

Roof Gutter Sealant is a premium quality butyl based sealant and adhesive that provides instant, permanent weatherproofing to a wide variety of roofing applications. Adheres to most common roofing materials such as bitumen, asphalt, felt, metals and wood. BENEFITS- Incorporates polymer additives to improve adhesion.- Can be applied in wet conditions, even under heavy rain.- Semi-drying - remains permanently elastic beneath surface skin.- High solids formulation - excellent gap filling properties without shrinkage.- Excellent external weathering properties. AREAS FOR USE- Fills and seals gaps/cracks in most roofing applications.- Bonds to: concrete, roofing felt, lead, zinc and masonry.- For bedding tiles, slates and flashing into position.- Joint sealing on gutters and down pipes.- Sticking down loose roofing felt.- Joint sealing between corrugated asbestos cement and iron sheeting etc.

Everbuild Clean Room Silicone is an advanced neutral curing hygienic sealant that combines Mould Shield, a powerful Anti-Bacterial compound with FDA Approved Food Compatibility. It prevents the formation of most common germs on its surface including E-Coli, MRSA, Salmonella, Listeria and Staphylococcus and stops Black Mould Growth. Clean Room Silicone offers outstanding adhesion to most substrates including plastics, ceramics and metal. It is virtually odourless in application with a slow skinning time, making it ideal for long joint runs in larger applications. Remains permanently flexible with a movement capability of 25%. Tested and approved to FDA, US Food and Drug Administration regulation No 21CFR177.2600 by IANESCO (France).Meets ISO 11600 F G 25HM.

1 x Everbuild 500 Bath Sanitary Silicone Sealant Manhattan Grey 290ml