This Milwaukee Hand Tools Adjustable Wrench has the following specification: Length: 380mm (15in)Jaw Opening Capacity for Pipe: 46mmJaw Thickness: 22mmTip Thickness: 13.5mmWeight: 1,470g

Size: 200mm (8 in)Jaw capacity: 27mm (1 1/16 in)

Size: 450mm (18 in)Jaw capacity: 60 mm (2 3/8 in)

Size: 350mm (14 in)Jaw Capacity: 51mm (2 in)

Jaw Capacity: 25mm Size 150mm (6 in)

The Bahco Adjustable Wrenches have been developed according to the scientific ERGO™ process and are made from high-performance alloy steel with a comfortable non-slip thermoplastic grip handle. The jaw does not fall out even at the maximum opening of the wrench and they are scaled in mm for pre-adjusting and accurate measurement. The head has a 16 angle that provides better accessibility and has a left-handed screw with a reversible jaw for pipe use. The head is chrome plated, precision hardened and anti-corrosion treated. Conforms to the following standards: ISO 6787, DIN 3117, ASME B107.8M - 1996 and BS 6333. Set of 3: 1 x 9070P: Length: 158mm, Capacity: 20mm. 1 x 9071P: Length: 208mm, Capacity: 27mm. 1 x 9072P: Length: 257mm, Capacity: 31mm.

Overall Length: 300mm (12 in).Jaw Capacity: 34mm.Weight: 690g.Spare Adjustable Jaw: BAH8073A - Available to orderSpare Knurl Set: BAH8073B - Available to order

Length. 250mm (10 in).Jaw Opening. 33mmWeight. 430g.

Capacity 38mm (1.1/2 in)

This Bahco ERGO™ Extra Wide Jaw Adjustable Wrench has the following specification: Length: 170mmJaw Width: 32mm

Overall length: 450mm (18 in).Jaw Capacity: 53mmWeight: 1665g.Spare Adjustable Jaw BAH8075A - Available to orderSpare Knurl Set: BAH8075B - Available to order

Overall length: 380mm (15 in).Jaw Capacity: 44mmWeight: 1035g.Spare Adjustable Jaw BAH8074A - Available to orderSpare Knurl Set: BAH8074B - Available to order

Overall length: 300mm (12 in).Jaw Capacity: 34mmWeight: 645g.Spare Adjustable Jaw BAH8073C-2 - Available to orderSpare Knurl Set: BAH8073C-95 - Available to order

Overall length: 300mm (12 in).Jaw Capacity: 34mm.Weight: 645g.Spare Adjustable Jaw BAH8073A - Available to orderSpare Knurl Set: BAH8073B - Available to order

Overall length: 250mm (10 in).Jaw Capacity: 30mm.Weight: 400g.Spare Adjustable Jaw BAH8072A - Available to OrderSpare Knurl Set: BAH8072B - Available to order

Overall length: 200mm (8 in).Jaw Capacity: 27mm.Weight: 255g.Spare Adjustable Jaw BAH8071A. - Available to orderSpare Knurl Set: BAH8071B - Available to order

Overall length: 150mm (6 in).Jaw Capacity: 20mmWeight: 135g.Spare Adjustable Jaw BAH8070A .Spare Knurl Set: BAH8070B

Overall length: 100mm (4 1/4 in).Jaw Capacity: 13mmWeight: 60g.Spare Adjustable Jaw BAH8069A .- Available to orderSpare Knurl Set: BAH8069B - Available to order

Size: 250mm (10in).Capacity: 35mm.

1 x Stanley Surform Shaver Tool Blade 60mm (2.1/2in) Replacement blade for Surform Shaver Tool (STA521115)

1 x Stanley Surform Blade Metal Plastic 250mm (10in)

The Stanley Surform Flat Block Plane for use on all types of wood, aluminium, copper, plastics and laminates. The metal body gives strength and durability and a thumb screw provides a quick blade release. It is supplied fitted with a 140mm (5.1/2in) fine cut blade. Overall Length: 155mm (6in).

1 x Stanley Surform Blade Fine Cut 140mm (5.1/2in)

1 x Stanley Surform Blade Fine Cut 250mm (10in)

1 x Stanley Surform Blade Half Round 250mm (10in)

The Stanley Surform Round File is useful for wood turning and wood sculpture. Also for enlarging holes in wood and smooth concave surfaces. There is a thumb grip at one end and a polypropylene handle at the other to provide more control when in use. It is supplied with a 250mm (10in) blade. Overall Length: 400mm (16in).

The Stanley Surform Plane is for use on all types of wood, aluminium, copper, plastic and laminates. It has a polypropylene handle and die-cast body for strength and durability and is fitted with a standard cut 250mm (10in) blade. Overall Length: 315mm (12in).

The Stanley Surform Flat File is for use on all types of wood, aluminium, plastics, copper and laminates. It has a strong metal body with a removable polypropylene handle. There is a knurled thumb grip at the other end of the body to give more control during use. Supplied with a 250mm (10in) blade. Overall Length: 440mm (17in).

1 x Stanley Surform Blade Standard 250mm (10in)

1 x Stanley Surform Blade Round 250mm (10in)

The Stanley Surform Planer file is suitable for use on all types of wood, aluminium, copper, plastics, and laminates. It is a highly adaptable tool and the tough polypropylene handle can be set in two positions to enable use as either a plane or file. It has a painted die-cast alloy body, and is fitted with 250mm (10in) standard cut blade. Overall Length: 310mm (12in).

The Stanley Surform Shaver Tool, ideal for stripping paint and smoothing down filler or plaster in awkward places. It has a lightweight plastic moulded body and is a compact and effective tool with a curved 62mm (2.1/2in) blade for increased stock removal. The blade can be changed without the use of additional tools. The shaver tool also has a side cutting edge, click action blade replacement and works on the pull stroke. Overall Length: 185mm (7in).

The Stanley Moulded Body Surform Block Plane for use on all types of wood, aluminium, copper, plastics and laminates. The blade is reversible for bull nose work, and it has a lightweight plastic moulded body with a thumb screw for quick release. Fitted with a 140mm (5.1/2in) fine cut blade. The blade can be changed without the use of additional tools. Overall Length: 155mm (6in).

The Stanley Moulded Body Surform Plane for use on all types of wood, aluminium, copper, plastic and laminates. It has a lightweight plastic moulded body with a thumb screw for quick blade release. Fitted with a standard cut 250mm (10in) blade. The blade can be changed without the use of additional tools. Overall Length: 270mm (10.1/2in).

The Stanley Moulded Body Surform Flat File for use on all types of wood, aluminium, plastic, copper and laminates. It has a lightweight plastic moulded body. The slight curve on the 140mm (5.1/2in) blade is for increased stock removal and it can be used on push or pull stroke. The blade can be changed without the use of additional tools, simply click on. Overall Length: 335mm (13in).

The Stanley Dynagrip Chisels have steel striking caps which can be used with a steel hammer for increased force at the point of contact. They also have a longer, soft grip handle for improved grip and control.Manufactured from forged high-carbon steel for strength and durability and pre-sharpened, their blades are ready for immediate use.This 5 piece set plus accessories comprises:5 x Dynagrip Chisels: 6, 12, 18, 25 and 32mm.1 x Oil stone1 x Honing Guide.

Set of 3 Stanley DYNAGRIP™ Bevel Edge Chisels, contains the following: 1 x DYNAGRIP™ Bevel Edge Chisel 12mm (1/2in)1 x DYNAGRIP™ Bevel Edge Chisel 18mm (11/16in)1 x DYNAGRIP™ Bevel Edge Chisel 25mm (1in)

This 60 1/2 Block Plane features a low angle cutter seat at 13.5 and is fully adjustable for depth-of-cut, cutter alignment and size of mouth. The body is made from a fine grey iron.Particularly effective on end grain and plastic laminates.Supplied with a pouch for convenient storage. Cutter Width: 35mm.Length: 150mm (6in).

This fully adjustable Block Plane has a body made from fine grey iron which is precision machined. It is fully adjustable for depth of cut, cutter alignment and size of mouth.It is ideal for end grain and general-purpose fine finishing work and comes with a pouch for convenient storage. The precision carbon alloy steel blade is 40mm wide. Cutter seats at 21 degrees. Length: 6.1/4in.Cutter width: 1.5/8in.

Set of 5 Stanley DYNAGRIP™ Bevel Edge Chisels, contains the following: 1 x DYNAGRIP™ Bevel Edge Chisel 6mm (1/4in)1 x DYNAGRIP™ Bevel Edge Chisel 12mm (1/2in)1 x DYNAGRIP™ Bevel Edge Chisel 18mm (11/16in)1 x DYNAGRIP™ Bevel Edge Chisel 25mm (1in)1 x DYNAGRIP™ Bevel Edge Chisel 32mm (1.1/4in)

Set of 3 Stanley DYNAGRIP™ Bevel Edge Chisels, contains the following: 1 x DYNAGRIP™ Bevel Edge Chisel 12mm (1/2in)1 x DYNAGRIP™ Bevel Edge Chisel 18mm (11/16in)1 x DYNAGRIP™ Bevel Edge Chisel 25mm (1in)

The Stanley STA 2-16-269 FatMax Thru Tang Chisel 5 Piece Set includes 6, 12, 18, 25 and 32mm chisels

The Stanley STA 2-16-268 FatMax Thru Tang Chisel 3 Piece Set includes 1/2, 3/4 and 1in chisels.

The Stanley FatMax Wrecking Knife has a 4mm, double-edged blade, that is ideal for demolishing, leveraging and splitting. Fitted with a rubber coated ergonomic grip for greater safety and leverage. The striking cap allows the knife to be hit with a hammer, speeding up work progress. Blade Width: 25mm

Comes complete with Tenon Saw (Fine Tooth). Size: 310 x 130mm Maximum depth of cut: 80mm

Size: 310 x 130mm Maximum depth of cut: 80mm

Comes complete with Tenon Saw. Length: 350mm

Length 350mm

The Stanley Sweetheart chisels are based on the original 750 series socket chisels. Designed for striking and paring, the hardwood handle provides a comfortable feel that transfers energy effectively when struck by a mallet. It also provides a wide butt end, or large sweet spot, for striking accuracy. They have high quality EN31 carbon steel blades with narrow side bevels which flatten and sharpen quickly and give a durable cutting edge which is ideal for woodworkers. The hardwood socket handles are replaceable and require setting prior to use. These delicate looking chisels are well balanced and every bit genuine hard working chisels. Set of eight chisels, individually boxed, supplied in a suede tool roll. Sizes: 1/8in, 1/4in, 3/8in, 1/2in, 5/8in, 3/4in, 1in, 1.1/4in.

The Stanley Sweetheart chisels are based on the original 750 series socket chisels. Designed for striking and paring, the hardwood handle provides a comfortable feel that transfers energy effectively when struck by a mallet. It also provides a wide butt end, or large sweet spot, for striking accuracy. They have high quality EN31 carbon steel blades with narrow side bevels which flatten and sharpen quickly and give a durable cutting edge which is ideal for woodworkers. The hardwood socket handles are replaceable and require setting prior to use. These delicate looking chisels are well balanced and every bit genuine hard working chisels. Set of four chisels, individually boxed supplied in a suede tool roll. Sizes: 1/4in, 1/2in, 3/4in and 1in.

For use with Product No. 112078 Rebate plane 78. Size 1. 1/2 - 38mm.

This professional general-purpose adjustable Block Plane has a fine grey iron body and is adjustable for depth of cut and alignment. A block plane is designed to cut end grain and is typically small enough to be used with one hand with the cutting blade (also known as an iron) bedded at a lower angle with the bevel up compared against other planes. It is frequently used for paring end grain, possible because its blade had been set at a shallow bed angle. This allows the blade to slice through end grain more efficiently; furthermore, for this to work, the plane is frequently held at an angle sometimes as much as 45 to the direction of travel, so that the cutting edge slices the wood fibers as they pass from one end of the cutting edge to the other. A block plane has many other uses in woodworking, ideal for cleaning up components by removing thin shavings of wood in to make a component fit within fine tolerances. Chamfering (angling square edges) and removing glue lines are some of the other uses woodworkers find for the block plane. Cutter Width: 40mm (1.5/8in).Length: 180mm (7in).

This Stanley H.1205 Handyman Bench Plane is ideal for workshop, site or finishing work. It has a precision cast fine grey iron base for stability and wear resistance, the handle and knob are made of virtually unbreakable polypropylene and are shaped for comfort.It has a chrome carbon steel cutter which is hardened and tampered to retain a keen cutting edge. This plane has fingertip adjustment for depth of cut and cutter alignment and a fully adjustable frog for all tasks and timber types. Its kidney shaped lever cap screw hole prevents accidental slippage of the cutter. Specifications: Iron Width: 50mm.Iron Length: 355mm.

This Stanley Handyman Bench Plane is ideal for workshop, site or finishing work. It has a precision cast fine grey iron base for stability and wear resistance, the handle and knob are made of virtually unbreakable polypropylene and are shaped for comfort.It has a chrome carbon steel cutter which is hardened and tampered to retain a keen cutting edge. This plane has fingertip adjustment for depth of cut and cutter alignment and a fully adjustable frog for all tasks and timber types. Its kidney shaped lever cap screw hole prevents accidental slippage of the cutter. Specifications: Iron Width: 50mm (2in).Iron Length: 250mm (9.7/8in).

The Stanley 151R is a professional spokeshave which is fully adjustable for depth of cut with twin thumbscrews. Machined from fine grey iron with round bottom. Precision machined bases are suitable for work on any concave surface. Specification Type: Round.Cutter Width: 55mm (2.1/8in).Length: 250mm (10in).

The Stanley 151 is a professional spokeshave which is fully adjustable for depth of cut with twin thumbscrews. Machined from fine grey iron with a flat bottom. Precision machined bases are suitable for work on any convex surface. Type: Flat.Cutter Width: 55mm (2.1/8in).Length: 250mm (10in).

The Stanley Sweetheart 12-137 No62 Low Angle Jack Plane is made from extra thick 3/16in A2 steel for superior edge retention, a one-piece precision ground frog and base casting, and a limited lifetime warranty.The Stanley No.62 is 63mm wide by 350mm long with a 50mm wide blade, installed bevel up without a cap iron. Jack planes with bevel-up irons are among the most useful planes because they can be used in place of a jointer plane on short boards, and for smoothing. The front knob and tote are genuine American Cherry for user comfort with Norris type adjustment for ease of use and adjustable throat plate for different types of wood.Specifications: Iron Width: 50mm.Iron Length: 355mm.

The Stanley 12-136 Sweetheart Premium No.4 Bench Plane is a great choice for woodworking projects of all types and sizes. The base and frog are cast as one to allow the plane to run smoothly over the stock with little to no chatter and a heavier body for increased performance.The precision machined base is flat to .003in and the blade is made of A2 steel for increased edge retention and has a patented lateral adjustment locking feature, solid brass adjustments for smooth operation and cherry wood FSC wooden handles giving you the control you need to achieve accurate results every time.Specifications: Length: 250mm.Width: 50mm. Originally used in 1919 to honour their company president, the Stanley Sweetheart logo quickly became synonymous with some of the most sought after and cherished hand tools on the market. Stanley proudly introduces the release of a new line of Sweetheart hand tools beginning with the 12-136 Sweetheart No. 4 Smoothing Bench Plane.

A manually adjustable general-purpose Block Plane. Ideal for the occasional user or DIY'er for a range of light-duty applications. Cutter Width: 40 mm (1.5/8in).Length: 168 mm (6.5in).

A manually adjustable general-purpose Block plane. Ideal for model makers, craft applications and light-duty jobs. Cutter Width: 35 mm (1.3/8in).Length: 140 mm (5.1/2in).

This rebate plane is made from fine grey iron with all working surfaces accurately machined for precise results. Two cutter positions for regular and bull nose work. The cutter is adjustable for depth of cut in the rear position. To accurately control dimensions of the rebate, an adjustable fence depth gauge is supplied. A cutting spur is also provided for cross grain work. Cutter Width: 38mm (1.1/2in).Length: 250mm (10in).

Length. 10.1/4in.Cutter Width. 2.3/8in.

Length 9.3/4in.Cutter width 2in.

Length 8.3/4in.Cutter width 1.3/4in.

The Jointer Plane performs a dual role between stock removal and accurately truing up long edges or levelling wide boards. It is fully adjustable and has a machined frog and cutter seating to reduce chatter. Cutter Width: 60mm (2.3/8in).Length: 560mm (22in).

The No.6 Bailey Fore plane performs a dual role between stock removal and truing up long edges or levelling wide boards. It is fully adjustable and has a machined frog and cutter seatings to reduce chatter. It also has a special cap iron design which curves shavings and prevents clogging. Cutter Width: 60 mm (2.3/8in).Length: 460 mm (18in).

This Stanley No.5 Bailey Professional Jack Bench Plane is a general-purpose plane for workshop, site, or fine finishing. It has a chrome carbon steel cutter hardened and tampered to retain a keen cutting edge. It has fingertip adjustment for depth of cut and cutter alignment, and fully adjustable frog for all tasks and timber types.This plane has a kidney shaped lever cap screw hole preventing accidental slippage of the cutter. It is a professional fully adjustable metal plane with a precision cast fine grey iron base for stability and wear resistance. The plane has a tight-fitting spring steel cap iron for a perfect shaving flow. The handle and knob are made of virtually unbreakable polypropylene and haped for comfort. Specifications: Iron Width: 50mm.Iron Length: 355mm.

Length: 9.3/4in Cutter width: 2 inch

Length 9.1/2in.Cutter width 1.3/4in. - 45mm

This Stanley 5044 Bit Brace, 250mm/10in, has a 12-point, 3-way, ratchet for use in confined spaces. The head is ball bearing mounted for smooth operation and has a 13mm universal chuck with 4 jaws and with a holder for square tip bits.This brace is chromium plated for corrosion resistance and longer life, it has a reversible 8 tooth ratchet. Specification: Length 250mm.

Hardened, tempered and sharpened flat blade for efficient performance. Nickel plated for protection against rust. Virtually unbreakable plastic handle, textured for improved grip. The blade shaft is cranked to prevent it turning in the handle. Size: 32mm (1.1/4in)Tip Size: 2.5mm (3/32in)

1 x Stanley DYNAGRIP™ Bevel Edge Chisel with Strike Cap 38mm (1.1/2in)

1 x Stanley DYNAGRIP™ Bevel Edge Chisel with Strike Cap 32mm (1.1/4in)

1 x Stanley DYNAGRIP™ Bevel Edge Chisel with Strike Cap 25mm (1in)

1 x Stanley DYNAGRIP™ Bevel Edge Chisel with Strike Cap 22mm (7/8in)

1 x Stanley DYNAGRIP™ Bevel Edge Chisel with Strike Cap 20mm (3/4in)

1 x Stanley DYNAGRIP™ Bevel Edge Chisel with Strike Cap 18mm (3/4in)

1 x Stanley DYNAGRIP™ Bevel Edge Chisel with Strike Cap 16mm (5/8in)

1 x Stanley DYNAGRIP™ Bevel Edge Chisel with Strike Cap 12mm (1/2in)

1 x Stanley DYNAGRIP™ Bevel Edge Chisel with Strike Cap 10mm (3/8in)

1 x Stanley DYNAGRIP™ Bevel Edge Chisel with Strike Cap 8mm (5/16in)

1 x Stanley DYNAGRIP™ Bevel Edge Chisel with Strike Cap 6mm (1/4in)

The Stanley STA 0-16-267 FatMax Thru Tang Chisel is 50mm (2in) in width and 165mm in length

The Stanley STA 0-16-266 FatMax Thru Tang Chisel is 40mm (1.5/8in) in width and 165mm in length.

The Stanley STA 0-16-265 FatMax Thru Tang Chisel is 38mm (1.1/2in) in width and 165mm in length

The Stanley STA 0-16-264 FatMax Thru Tang Chisel is 35mm (1.3/8in) in width and 155mm in length.

The Stanley STA 0-16-263 FatMax Thru Tang Chisel is 32mm (1.1/4in) in width and 155mm in length

The Stanley STA 0-16-262 FatMax Thru Tang Chisel is 30mm (1.1/8in) in width and 155mm in length

The Stanley STA 0-16-261 FatMax Thru Tang Chisel is 25mm (1in) in width and 155mm in length

The Stanley STA 0-16-260 FatMax Thru Tang Chisel is 22mm (7/8in) in width and 135mm in length

The Stanley STA 0-16-259 FatMax Thru Tang Chisel is 20mm (13/16in) in width and 135mm in length

The Stanley STA 0-16-258 FatMax Thru Tang Chisel is 18mm (11/16in) in width and 135mm in length

The Stanley STA 0-16-257 FatMax Thru Tang Chisel is 16mm (5/8in) in width and 130mm in length

The Stanley STA 0-16-256 FatMax Thru Tang Chisel is 15mm (9/16in) in width and 130mm in length

The Stanley STA 0-16-255 FatMax Thru Tang Chisel is 14mm (17/32in) in width and 125mm in length

The Stanley STA 0-16-254 FatMax Thru Tang Chisel is 12mm (1/2in) in width and 125mm in length

The Stanley STA 0-16-253 FatMax Thru Tang Chisel is 10mm (3/8in) in width and 125mm in length

The Stanley STA 0-16-252 FatMax Thru Tang Chisel is 8mm (5/16in) in width and 125mm in length

The Stanley STA 0-16-251 FatMax Thru Tang Chisel is 6mm (1/4in) in width and 125mm in length

The Stanley FatMax Folding Pocket Chisel is ideal for job site work. The blade is made from hardened and tempered carbon steel for edge retention. It folds within the handle to fit in the pocket, preventing blade damage and trouser cutting. Fitted with a bi-material for comfort. It has a steel strike cap, which is suitable for use with a hammer.