019380055 1938R/S5 1938 R/S5-sets 5 blades for 1938
Blades for windscreen removers
1938R/L1 Short straight blade for windscreen removal from inside vehicle
1938R/L2 Long straight blade for windscreen removal from inside vehicle
1938R/L3 Curved flat blade for hard-to-reach areas
1938R/L4 Scraping blade
1938R/L5 Blade with hook for windscreen removal from outside vehicle

Composed of:

C55B/2.8
Workbench with worktop 2850x700 mm covered with a shockproof, nonscratch, ABS coat resistant to oils and hydrocarbons.
Fitted with:
• Holes for a vice (1599F/150, to be ordered separately)
• Vertically adjustable feet

C55MS
Fixed service module
• Built-in waste bin
• Paper roll compartment
• Storage drawer, 305x270 mm

C55C7
Mobile roller cab with seven drawers
(588x367 mm), with ball bearing slides
• 4 castors, Ø 100 mm, 2 fixed and 2 steering (one with brake)
• Aluminium opening system throughout length of drawer
• Drawer bases protected by foamed rubber mats
• Front centralised lock
• Can be fitted with foam trays

C55M7
Fixed module with seven drawers
(588x367 mm), with ball bearing slides
• Aluminium opening system throughout length of drawer
• Drawer bases protected by foamed rubber mats
• Front centralised lock
• Can be fitted with thermoformed trays


C55PM + C55PT1,0x0,6 + C55/PF
• 2 suspended cabinets (1024x400x300 mm) fitted with gas springs
• 2 under-cabinet panels (1024x620x25 mm)
• 2 perforated under-cabinet tool panels (1024x620x25 mm)

C55PM/M0.8 + C55PT0.8x0.6 + C55/1PF
• 1 suspended cabinet (800x400x300 mm) fitted with gas springs
• 1 under-cabinet panel (800x620x25 mm)
• 1 perforated under-cabinet tool panel (800x620x25 mm)


 467 kg

Composed of:

C55B/2.8
Workbench with worktop 2850x700 mm covered with a shockproof, nonscratch, ABS coat resistant to oil and hydrocarbons.
Fitted with:
• Holes for a vice (1599F/150, to be ordered separately)
• Vertically adjustable feet

C55M7
Fixed module with seven drawers
(588x367 mm), with ball bearing slides
• Aluminium opening system throughout length of drawer
• Drawer bases protected by foamed rubber mats
• Front centralised lock
• Can be fitted with foam trays

C55MA
Fixed two-door module
• Push-pull opening system
• With lock
• Interior shelf, vertically adjustable

C55M4
Fixed module with four drawers
(588x367 mm), with ball bearing slides
• Aluminium opening system throughout length of drawer
• Drawer bases protected by foamed rubber mats
• Front centralised lock
• Can be fitted with foam trays

C55PM + C55PT1,0x0.6 + C55/PF
• 2 suspended cabinets (1024x400x300 mm) fitted with gas springs
• 2 under-cabinet panels (1024x620x25 mm)
• 2 perforated under-cabinet tool panels (1024x620x25 mm)

C55PM/M0.8 + C55PT0.8x0.6 + C55/1PF
• 1 suspended cabinet (800x400x300 mm) fitted with gas springs
• 1 under-cabinet panel (800x620x25 mm)
• 1 perforated under-cabinet tool panel (800x620x25 mm)

C55A2
• 1 two-door tool cabinet


 535 kg

Composed of:

C55B
Workbench with worktop (2050x700 mm) covered with a shockproof, nonscratch ABS coat resistant to oils and hydrocarbons.
Fitted with:
• Holes for a vice (1599F/150, to be ordered separately)
• Vertically adjustable feet

C55C7
Mobile roller cab with seven drawers (588x367 mm) with ball bearing slides
• 4 castors Ø 100 mm, 2 fixed and 2 steering (one with brake)
• Aluminium opening system throughout length of drawer
• Drawer bases protected by foamed rubber mats
• Front centralized lock
• Can be fitted with thermoformed trays

C55MA
Fixed two-door module
• Push-pull opening system
• With lock
• Interior shelf, vertically adjustable

C55PS
Tool wall system with shutter and framework
• Aluminium shutter, vertically adjustable, with lock
• Removable perforated tool panel


 347 kg

Composed of:

C55B
Workbench with worktop (2050x700 mm) covered with a shockproof, nonscratch ABS coat resistant to oils and hydrocarbons.
Fitted with:
• Holes for a vice (1599F/150, to be ordered separately)
• Vertically adjustable feet

C55M7
Fixed module with seven drawers (588x367 mm) with ball bearing slides
• Aluminium opening system throughout length of drawer
• Drawer bases protected by foamed rubber mats
• Front centralized lock
• Can be fitted with thermoformed trays

C55MS
Fixed service module
• Built-in waste bin
• Paper roll compartment
• Storage drawer, 305x270 mm

C55/2PM + C55/PF
Tool wall system with 2 suspended cabinets
• 2 suspended cabinets, 1024x400x300 mm, with gas springs
• 2 under-cabinet panels, 1024x620x25mm
• 2 under-cabinet perforated tool panels, 1024x620x25 mm


 350 kg

Combination comprising:
- Two-door tool cabinet (C55A2)
- Workbench (C55BO/2)
- Fixed module with 7 drawers (C55M7)
- Fixed service module (C55MS)
- Tool panel with suspended cabinets (C55/2PM)

Combination comprising:
- Workbench (C55BO/2)
- Roller cab module with 8 drawers (C55C8)
- Fixed module with 2 storage drawers (C55M2)
- Wall tool system with shutter (C55PS-O)

 334 kg
2.05x2.00x0.76 m

​Coloured bits for immediate head recognition.

Each head has a different colour for quick identification.
Small, compact ratchet for jobs in small areas; recommended for general maintenance: automation, assembly lines.

Main feautures:
∙ 5 degree take-up angle
∙ Knurled head for quick mechanism handling
∙ Sealing magnet
∙ Can be used with bits and sockets

61 bits and 1 quick-release magnetic bit holder (items 861LP, 861PE, 861PH, 861PZ, 861TX, 861RTX, 861TRW, 861TQS, 861SP, 851SR)

New bit holder with articulated T handle

 420x185x60 mm –  3 kg

335x145x60 mm –  1,7 kg

52 hexagon bits, 10 mm, and 2 accessories
(items 867PE, 867PE/L, 867XZN, 867XZN/L, 867TX, 867TX/L, 867RTX, 867RTX/L, 867/1, 867/1)

Automatic blade loading Automatic blade loading

• Nonslip bi-material handle
• Automatic blade loading
• Blade locking nut for maximum blade stability under stress conditions
• Nonreturn safety slider
• Automatic blade loading

Features:
• Automatic blade change
• Screw blade locking system

• Interior blade storage
• Belt clip
• Sturdy aluminium frame

Features:
● With clip and fabric wallet with loop
● Anodized aluminium handle
● Safety blade lock

320x250x50 mm

– 2 TORX T40-T45 bits
– 1 XZN 10 bit
– 1 hexagon bit, 8 mm
– 3 bi-hex bits, 10-12-13 mm

Can be used as a mobile workstation for diagnostic tools, laptops, testers and battery chargers.

Specifications:
• Painted sheet metal frame: unparalleled firmness and sturdiness
• Ergonomic handle
• 2-level top
• Pull-out drawer for housing a mini keyboard
• 1 shelf with adjustable position, 1 fixed shelf and door
• 4 useful side cable reels made of plastic
• 2 useful side containers
• 2 fixed rear castors Ø 160 mm
• 2 steering front castors Ø 100 mm (one with frame)
• Weight: 36.5 kg

Ideal for jobs in small areas

– Ultracompact, no more than 176 mm in length; ultralightweight, no more than 1.1 kg, with battery, perfectly balanced
– Double mechanical speed with steel gears and 18-position clutch
– Torque up to 34 Nm and 1500 rpm (350 rpm in 1st gear); drills diameters up to 10 mm in steel and 20 mm in wood
– 2Ah batteries and charge indicator on drill body
– Triple battery self-protection (heat, overload and monitoring of charge differences (if any) between cells) for increased safety and durable high performance
– Ergonomic nonslip handle
– Front LED
– 10-mm autochuck
– Belt clip (right/left side)
– Selector switch, screwing-unscrewing-locking modes (for transportation)
– Supplied in a hard case with 2 lithium ion batteries (2 Ah) and quick charger (45 min)

Mechanical and hydraulic operation

Allows DELPHI-BOSCH-SIEMENS-DENSO injectors to be removed
Allows DELPHI-BOSCH-SIEMENS-DENSO injectors to be removed
 530x470x140 mm –
2,0 kg

• Mechanical and hydraulic operation
• Includes one 12-t hydraulic jack
• Can be directly used on vehicle with mounted engine
• Numerous adjustment options on head make it possible to work on most engines available

• Sturdy and handy
• Autochuck
• Reversible lever
• Slip-proof handle
• Exhaust through handle

• “Pin Clutch” impulse device
• Lightweight and powerful
• Three power adjustable positions
• Exhaust through handle
• Balancing hook
• “Pin Clutch” impulse device

Set of 6 pin punches with handles
2-3-4-5-6-8 mm

Highly lubricating and protective.
Suitable for milling, boring, threading, drilling and manual and automatic machine working.
Highly resistant to oxidation.
Water washable. Solvent-free.


OPERATING INSTRUCTIONS: Shake before use. Water washable.

Legend concerning the countries in which the products are sold Art. (1) (2) (3):
Art. (1): AT, BE, CH, FR, GB, IE, IT, MC, NC, NL, RE, SM
Art. (2): AD, AE, DO, ES, GB, HU, IE, PT
Art. (3): CN, CZ, PL, SI, SK

Silicone lubricant and detacher.

Features:
• Suitable for lubricating plastic, rubber and metal parts. Protects from corrosion
• Detaching, antiadhesive for plastic and rubber moulding. Antistatic, for worktops
• Waterproof, protects from humidity and weather corrosion
• Protective, for electric circuits. Can be used to polish wood, plastics and rubber
• Solvent-free


Direction for use:
Shake before use.
Clean surfaces to be treated.
Apply product at a distance of 10 cm.

Legend concerning the countries in which the products are sold Art. (1) (2) (3):
Art. (1): AT, BE, CH, FR, GB, IE, IT, MC, NC, NL, RE, SM
Art. (2): AD, AE, DO, ES, GB, HU, IE, PT
Art. (3): CN, CZ, PL, SI, SK

Mineral grease mixed with copper.
Suitable for lubricating joints, bolts, gears, driveshafts and other metal parts subject to high temperatures (up to 1,000 °C).
Ideal for preventing seizure and making it easy to unlock threads and parts in general.
Protective, anti-wear. Prevents oxidation. Does not drip.


DIRECTION FOR USE: Shake before use.
Clean surfaces to be treated.
Apply product at a distance of 10 cm.

Legend concerning the countries in which the products are sold Art. (1) (2) (3):
Art. (1): AT, BE, CH, FR, GB, IE, IT, MC, NC, NL, RE, SM
Art. (2): AD, AE, DO, ES, GB, HU, IE, PT
Art. (3): CN, CZ, PL, SI, SK

Lubricating grease mixed with PTFE.
Particularly useful for lubricating industrial chains and mechanical movements subject to heavy stress and low rotation speeds.
Also suitable for hinges, locks, drawer slides, gates and applications on plastics and rubber.
Totally colourless. Waterproof and resistant to oxidation.
Highly resistant to cold and heat (-30 °C to +220 °C).


DIRECTION FOR USE: Shake before use.
Clean surfaces to be treated.
Apply product at a distance of 10 cm.

Legend concerning the countries in which the products are sold Art. (1) (2) (3):
Art. (1): AT, BE, CH, FR, GB, IE, IT, MC, NC, NL, RE, SM
Art. (2): AD, AE, DO, ES, GB, HU, IE, PT
Art. (3): CN, CZ, PL, SI, SK

Based on grease with lithium, titanium and zinc oxide soaps. Ideal for lubricating gears, bearings and joints.
Specific for marine applications.
Highly resistant to water, sea salt, weather and high temperatures.
Does not drip.


DIRECTION FOR USE: Shake before use.
Clean surfaces to be treated.
Apply product at a distance of 25 cm.

Legend concerning the countries in which the products are sold Art. (1) (2) (3):
Art. (1): AT, BE, CH, FR, GB, IE, IT, MC, NC, NL, RE, SM
Art. (2): AD, AE, DO, ES, GB, HU, IE, PT
Art. (3): CN, CZ, PL, SI, SK

Features:
• Particularly useful for lubricating chains, gears and moving metal parts as well as hinges, locks and pivots
• Resistant to friction and weather
• Highly resistant to high temperatures (up to 210 °C)
• Highly adhesive. Does not drip


Direction for use:
Shake before use.
Clean surfaces to be treated.
Apply product at a distance of 15 cm.

Legend concerning the countries in which the products are sold Art. (1) (2) (3):
Art. (1): AT, BE, CH, FR, GB, IE, IT, MC, NC, NL, RE, SM
Art. (2): AD, AE, DO, ES, GB, HU, IE, PT
Art. (3): CN, CZ, PL, SI, SK

Unlocking lubricant, super-penetrating
Unlocking, deoxidizing, highly penetrating, for quick rust and oxidation removal from nuts, bolts, screws and gears.
Waterproof, for water and humidity removal from treated parts.
Highly resistant to cold and heat (-40 °C ÷ +150 °C).


DIRECTION FOR USE: Apply product and wait a few minutes.

Legend concerning the countries in which the products are sold Art. (1) (2) (3):
Art. (1): AT, BE, CH, FR, GB, IE, IT, MC, NC, NL, RE, SM
Art. (2): AD, AE, DO, ES, GB, HU, IE, PT
Art. (3): CN, CZ, PL, SI, SK

7-in-1 multipurpose unlocking lubricant
Adjustable Straw.
7 in 1.
1. Unlocking: dissolves rust from nuts, bolts and gears in general.
2. Lubricating: suitable for all mechanical parts subject to stress.
3. Detergent, degreasing: removes grease and oil from metal surfaces.
4. Rust protective: forms a film protecting against corrosion from weather.
5. Deoxidizing, for electrical contacts: reactivates contacts and prevents short circuits.
6. Waterproof: removes water and humidity from all surfaces.
7. Antifreezing: highly resistant to low temperatures (up to -40 °C).
Fitted with a special valve allowing supply when spray can is upside down.
Silicone-free.
ADJUSTABLE STRAW allows - through a special modular straw - application on parts which would be difficult to reach with a standard dispenser.


Directions for use:
Apply product and wait a few minutes.
To unlock: use suitable tools.
To degrease: clean with a cloth.

Legend concerning the countries in which the products are sold Art. (1) (2) (3):
Art. (1): AT, BE, CH, FR, GB, IE, IT, MC, NC, NL, RE, SM
Art. (2): AD, AE, DO, ES, GB, HU, IE, PT
Art. (3): CN, CZ, PL, SI, SK

095260010 9526P

095260005 9526F

Features:
• Overall height: 460 mm
• 3 drawers with ball bearing slides
• Front tote-tray
• Rear tote-tray with partitions
• 4 pivoting castors
• Weight: 10.6 kg
 10,6 kg

New Item
Anti-loosening locking screw,
made of stainless steel
Kevlar®
Fibre optics
• Made of steel specially treated to work on cut-proof materials, including aramidic fibres, e.g. Kevlar®
• Also suitable for fibre optics

• Die-cast aluminium body plated with black chemical nickel
• Nylon cup with drip-catching device, 3/8M BSP thread
• Body thread: 1/4" BSP cylindrical gas thread
• Pressure and airflow regulator
• Jet regulator from round to fan spray pattern
• Paint quantity regulator
• Supplied with service spanner for maintenance operations

100% Italian made: unparalleled reliability and sturdiness
for professional uses
Particularly recommended for surface finishing jobs on several materials (metal, plastic, glass, ceramic, wood etc.). The cabin is made from properly reinforced sheet steel which results in unparalleled sturdiness and firmness.
The cabin is equipped with the following:
- loading door with magnet closure
- perforated sheet metal top
- standard connection for vacuum cleaners, ø 36 mm
- protective polycarbonate viewing window, 6 mm
- LED lamp
- pneumatic circuit (compressed air inlet)
- sanding gun with trigger operation


TECHNICAL DATA
Useful dimensions of cabin: 600x520x320 mm
Overall dimensions: 660x530x500 mm
Weight: 38 kg
Worktop: perforated sheet metal
Lighting: LED
Air consumption: 340 l/min at 7 atm
Power supply: 220 V - 50 Hz

Cartridge capacity: 310ml Bag capacity: 310ml Not suitable for use with loose bonds

017720029 1772H 170 18 213,4

for deforming plastics and unlocking metal parts
35 g tank

• three interchangeable nozzles: 550 °C; 1000 °C; 1300 °C
• supplied with a stand in hard case

4 sensors with TRUE COLOR filter.
Solar cell power supply and lithium batteries for outstanding LCD filter life.

Features:
• Viewing area: 98x80 mm
• Darkening shade range: 5÷8.5/ 9-13, internally adjustable
• UV/IR protection: DIN16
• Light to dark time: 1/25000 s
• Dark to light time: 0.1-2.0s
• Adjustable darkening sensitivity and delay
• Auto on/off
• Grinding feature
• Low battery indicator
• Ergonomic design, lightweight, well-balanced
• With adjustable ring nut

Features:
● Viewing area: 92x43 mm
● Darkening shade: DIN 9-13, externally adjustable
● UV/IR protection
● Light to dark time: 1/1000 s
● Dark to light time: 0.1-1.0 s
● Adjustable darkening delay
● Auto on/off
● Grinding feature
● Optimized shape to make it easier to breathe with pulled-down screen

DEWALT DCS565N-XJ 18V XR 165mm Circular Saw, Bare Unit

Variable adjustment of the bevel angle to 50 degrees
Model number; dEWDCS565N
Dust blower and LED work light ensure cutline visibility
Include brushless motor for extended run-time, reliability and durability
Durable tool design including a cast aluminum base for accurate cuts

Product Overview
Ready to take on a variety of your cutting applications. The DCS565 18V XR 165mm Circular Saw combines performance and versatility and features a powerful brushless motor that delivers 4,950 rpm for fast, accurate, and consistent cutting. Tool-free depth and bevel adjustments provides a max depth of cut of 55mm at 90° along with a max bevel of 50°.



Additional Features
DEWALT Brushless Motor for extended run-time, reliability & durability
Extremely durable tool design, including a cast aluminum base for repetitive, accurate cuts
Variable adjustment of the bevel angle to 50 degrees
Ultra thin kerf 165 mm, 24 tooth carbide-tipped blade allows for efficient run time and fast, smooth cut finish at maximum 55 mm depth of cut
Optimum balance for safe, fatigue-free operation
Lock off switch and electronic motor brake for additional control and work safety
Additional handle for safe two-handed work
Direct compatibility with DEWALT AirLock system for easy, secure connection to extraction hose
Convenient storage on the jobsite with the built-in rafter hook
Dust blower clears dust and debris from cut line

DEWALT DCS355N-XJ Oscillating Multi-Tool 18V Li-Ion Cordless Brushless Battery Powered

Compact 300W motor delivers 0-22,000 oscillations per minute, providing faster completion of the most demanding tasks
Variable speed control and dual grip position allows for a simple soft start function and better application control
Quick-fit depth stop for ultimate control over application
Unique quick change accessory system allows for blades and attachments to be easily changed without the use of tools
Part of the DEWALT's biggest and fastest growing system - XR, compatible with all 18V XR batteries. DEWALT 18V XR Lithium-Ion Battery sold separately.

Product Overview
The DCS355 18V XR Oscillating Multi-Tool has a powerful brushless motor providing up to 57% more run time over a similar brushed tool. The Quick-Change accessory system allows you to change blades quickly and easily, and with the universal accessory adaptor, it's compatible with most oscillating tool accessories. The Variable Speed Trigger provides ultimate speed and application control, the DEWALT Oscillating Tool Guide System allows you to customize the depth or height for accurate repeatability, and the bright LED light illuminates dark work spaces. Bare unit, batteries and charger sold separately.



Additional Features
Bright LED light illuminates dark work surfaces for accurate cutting
DUAL-GRIP Variable Speed Trigger provides the ultimate speed and application control
QUICK-CHANGE Accessory System allows blades and attachments to be changed quickly without the use of tools
Universal Accessory Adaptor for use with most oscillating tool accessory brands
29 pc Accessory Set to support a range of cutting and sanding applications
DEWALT Brushless Motor delivers up to 57% more run time over brushed motors

• Sheet metal frames and plastic tops
• 3 detachable modules:
1 upper tool box, 220 mm high 1 central module, 165 mm
high,with 2 drawers, 60 mm high 1 lower module, 330 mm
high, with up-and-over door, 280 mm high, with castors
• Castors ø 128 mm
• Telescopic handle, can be adjusted in 4 positions
• Module release system with access to all tool compartments
• Upper tool box with removable interior
object compartment and 2 tote-trays built into cover

BW 42 Combination wrenches 8-10-11-12-13-14-15-17-19 mm 9
BW 1150BM 180 Heavy-duty combination pliers  180 mm 1
BW 1082BM 160 Diagonal cutting nippers  160 mm 1
BW 1770RL 9-mm snap-off spare blades, 10 pieces,
for utility knives BW 1770, BW 1770A and BW 1770BM 10x 10

Features:
• Maximum capacity: 10 t
• Manual 2-speed pump
• Moving piston
• Automatic piston return
• Set of V-shaped prisms included
• Chrome-plated stand

Reversible impact wrench, made from composite material
Features:
• Double hammer impulse device
• Lightweight and well-balanced for enhanced ease of use
• Reversible lever
• Three power adjustable screwing positions
• Exhaust through handle
• Vibration-damping handle
Free speed 5,000 rpm
Max. torque 2,100 Nm
Bolt capacity Cl 8.8 M3046 mm
Bolt capacity Cl 12.9 M2741 mm
Air inlet 3/8" GAS
Operating pressure 6.2 bar
Internal hose size (Ø) 10 mm
Mean air consumption 221 l/min
Weight 3.7 kg

Feeler gauges for car body repair shops, pair, 10-bladed, with suction cup
Suitable for:
• fitting rear windows
• maintaining position during installation


 50 g

Product Name
Art.
Quantity per Wishlist
Product Name
Art.
Quantity per Wishlist
012031001 1203E/D5
Set of 5 Evox screwdrivers items 1201E, 1202E
1
012031003 1203E/D5PZ
Set of 5 Evox screwdrivers items 1201E, 1209E/PZ
1
012031006 1203E/D6
Set of 6 Evox screwdrivers items 1202E, 1204E
1
012031007 1203E/D7
Set of 7 Evox screwdrivers items 1201E, 1202E
1
012031008 1203E/D8
Set of 8 Evox screwdrivers items 1201E, 1202E
1
012031018 1203E/D8P
Set of 8 Evox screwdrivers
1
012031010 1203E/D10
Set of 10 Evox screwdrivers items 1201E, 1202E
1
012031019 1203E/D10N
Set of 10 Evox screwdrivers items 1201E, 1202E

Comprehensive workshop equipment combination RSC55
Comprehensive combination comprising:
- Single-door tool cabinet (C55A1)
- Two-door tool cabinet (C55A2)
- Workbench (C55BO/2)
- Workbench with sockets (C55PRO BO/2)
- Mobile roller cab with 7 drawers (C55C7)
- Fixed module with 2 storage drawers (C55M2)
- Fixed module with 7 drawers (C55M7)
- Fixed service module (C55MS)
- Tool panel with suspended cabinets (C55/2PM)
- Tool panel with shutter (C55PS-O)


5,4x2,00x0,76 m

Plastic barrier chain

Blades for windscreen removers
1938R/L1 Short straight blade for windscreen removal from inside vehicle
1938R/L2 Long straight blade for windscreen removal from inside vehicle
1938R/L3 Curved flat blade for hard-to-reach areas
1938R/L4 Scraping blade
1938R/L5 Blade with hook for windscreen removal from outside vehicle

1752
Plastic pressure cans, rigid spouts
For use with oil with density ranging from ISO22 to ISO68

123E1/4
Bit holder adaptor, 1/4", for 10 mm ratcheting wrenches
• Used in combination with 10-mm ratcheting wrench, it allows quick use of bit.

1473P
Clamp pliers for OETIKER® low-profile collars

Product Name Art.
014300105 1430/S5
set of 5 tapered extractors for broken screws and studs, made from hardened steel (item 1430/..), in case
1430/1-1430/2-1430/3
1430/4-1430/5

Double ended hexagon / bi-hex socket wrenches, chrome-plated
• Can be used with sliding handle in through hole.
• Hole on short side allows access to nut, e.g. with projecting threads.

Product Name Art.
000960946 96T/S5P
Set of 5 offset hexagon key wrenches with handles
2,5-3-4-5-6

Lever operated grease guns
Can be used with cartridges 1750CG or loose grease


Product Name Art. 1750CG
cc cc ​L
mm
017500500 1750 500 400 500 380

Magnetic bit holder, insulated, with bimaterial handle
Product Name Art. L
mm L1
mm D
mm 
g
008500910 850MQ 233 125 12.5 85

DC-powered inverter welding machine for MMA welding
The merger of BETA S.p.A. and the Italian-based welding industry leader, HELVI S.p.A., has translated into the DC inverter welding machine, BETA 1860BH, ideal for MMA welding with rutilic, basic and stainless steel electrodes.
Compact and lightweight, complete with arc force, hot start, anti-sticking and thermostatic protection features, it is the perfect choice for semi-professional maintenance jobs.

Supplied with 16 mm2 cables and hammer brush.
Power Generator Friendly.


Features

• Adjustment current:10÷120A
• Power supply: 1x230V
• Use factor (40 °C) :
25% - 120 A
50% - 80 A
100% - 60 A
• Protection: IP22S
• Usable electrodes: Ø 1.6 - 3.2mm rutilic, basic, stainless steel, cast iron etc.
• Supplied with 16mm² cables

Inverter welding machine for MMA welding
The merger of BETA S.p.A. and the Italian-based welding industry leader, HELVI S.p.A., has translated into the DC inverter welding machine, BETA 1860BH, ideal for MMA welding with rutilic, basic and stainless steel electrodes.
Compact and lightweight, complete with arc force, hot start, anti-sticking and thermostatic protection features, it is the perfect choice for semi-professional maintenance jobs.

Supplied with 16 mm2 cables and hammer brush.
Power Generator Friendly.


Features

• Adjustment current: 10÷160A
• Power supply: 1x230V
• Use factor (40 °C) :
25% - 160 A
60% - 100 A
100% - 80 A
• Protection: IP22S
• Usable electrodes: Ø 1.6 - 4mm rutilic, basic, stainless steel, cast iron etc.
• Supplied with 16mm² cables

Measuring tapes with fixed magnets
Features:
• Shock-resistant ABS casings
• Steel tapes
• Precision class: II

Break-back torque wrenches

Product Name Art. ​Nm ​Kgfm ​lbf.ft ​D
mm ​A
mm ​L
mm ​
kg ​
006770607 677/C600 120÷600 12÷60 100÷450 69 55 1059 6,0 10

006770612 677/C800 200÷800 20÷80 150÷600 69 55 1319 6,7 10

006770616 677/C1000 300÷1000 30÷100 200÷750 69 55 1554 7,4 20

006770621 677/C1500 700÷1500 70÷150 500÷1000 69 55 1869 9,6 25

Evox-E electric screwdriver
Technical data:
• 3.7V 2300mAh lithium battery
• Maximum torque in electric mode: 1.2 Nm
• Over 1,000 screw fastenings at 1.2 Nm per charging cycle
• Speed: 250 rpm
• Outstanding static resistance (up to 12 Nm, manual tightening)
• Outstanding mechanical resistance
• 1/4" magnetic bit holder
• Compatible with all standardized bits
• Rechargeable via USB-C cable (included)
• USB-C port protected with screw cap
• Front ring LEDs for improved visibility of working area
• When charging, steady LEDs indicate that charging is complete
• Ergonomic nylon handle inspired by Evox screwdriver
• Built-in and sealed operation buttons
• Convenient belt pouch with bit pockets (6 50mm-long mixed bits included)

Self-locking wrench with automatic take-up device for hexagons, 8 to 32 mm
Effective on worn screws
Quick, multipurpose
Ideal for hexagon, Spline, square and Torx® head screws, including damaged screws.

Tool pouch, empty, made from nylon, with belt
• Five large tool pockets
• One front scissors pocket
• Buckle with carabine hook for adhesive tape
• Adjustable belt (70 ÷ 120 cm)

Dimensions: 155x285x80 mm

Folding workbench, Light version
Even lighter; only 18.5 kg.
Compact.
Features:
• Lightweight, easy to carry
• Hard-Wearing: static load capacity 200 kg
• Reliable: worktop (800x500mm) made of galvanized sheet iron, for use on one side, protected by an anti-oil and anti-petrol rubber cover
• Handle with rubber cover, for easy transportation
• An additional sturdy, reliable worktop, always within reach

Tool case with assortment of 163 GENERAL MAINTENANCE TOOLS
• Removable interior tool panel
• Integrated soft foam tray

 465x330x170 mm

Components
BW 42 Combination wrenches 8-9-10-11-12-13-14-15-16-17-18-19 mm 12
BW 96BPC/SC9 Set of 9 ball head offset hexagon key wrenches  1,5-2-2,5-3-4-5-6-8-10 mm 9
BW 111 Adjustable wrenches 250 mm 1
BW 1048 Slip joint pliers, boxed joints 250 mm 1
BW 1128BMX Electrician's scissors,
stainless steel blades,
with microteeth 150 mm 1
BW 1082BM Diagonal cutting nippers  160 mm 1
BW 1150BM Heavy-duty combination pliers  180 mm 1
BW 1166BM Extra-long needle knurled nose pliers  160 mm 1
1201E Screwdrivers for slotted head screws  2,5x50 - 3x75 - 4x125 - 5,5x150 - 6,5x150 - 8x150 mm 6
1202E Screwdrivers for cross head Phillips® screws  PH1x80 - PH2x100 mm 2
BW 1253 Mains testing screwdriver  3,5x100 mm 1
1209E/PZ  PZ1x80 - PZ2x100 mm 2
BW 1256/C21-1 22
BW 1370 300 Engineer's hammers 300 g 1
BW 1692/5 Measuring tapes 5 m 1
BW 1725CR Mini hacksaw frame 150 mm 1
1771 18 mm 1
BW 861/C61 Set of 60 bits
with magnetic bit holder,
in pocket-size case      61
BW 895/1 Socket holders
for items BW 861, BW 862, BW 866 1
BW 900 Hexagon hand sockets, 1/4"  4-4,5-5-5,5-6-7-8-9-10-11-12-13-14 mm 13
BW 900/20 50 mm 1
BW 900/20L 100 mm 1
BW 900/25 Universal joint - 1/4" 1
BW 900/30 1/4" drive spinner handle 1
BW 900/42 1/4” drive sliding T-handle 110 mm 1
BW 900/55 Reversible ratchet, 1/4"  1
BW 920A Hexagon hand sockets, 1/2"  10-11-12-13-14-15-16-17-18-19-21-22-24 mm 13
BW 920/21 Extension bar - 1/2" 125 mm 1
BW 920/25 Universal joint, 1/2" 1
BW 910/16F Adaptor - F3/8"xM1/2" 1
BW 920/22 Extension bar - 1/2" 250 mm 1
BW 920/55 Reversible ratchet  1

Solid and fluid vacuum cleaner, 50 l, stainless steel drum
Blowing function
Non-marking wheels
TECHNICAL SPECIFICATIONS
• two-stage by-pass motor
• voltage: 220/240 V
• frequency: 50/60 Hz
• max. power: 1350 W
• airflow rate: 55 l/sec.
• max. suction power: 240 mbar
• max. drum capacity: 50 l, made of stainless steel
• acoustic emissions: <63 dB(A)
• cable length: 6 m
• trolley for accessories
STANDARD ACCESSORIES, Ø 45 mm
• 1 corrugated hose with ergonomic handle
• 2 stainless steel extension tubes
• 1 industrial brush frame
• 1 industrial section for carpets
• 1 industrial section with fluid collection hoses
• 1 flat nozzle

FILTERING SYSTEMS
• 1 filter paper bag
• 1 surface filter cartridge 5200 cm2, 12 μm nom.
• 1 anti-foam filter PPI 45/PPI 30

Parallel bench vices, forged
Fully steel cast. Milled and hardened jaw surface.
Front opening. High clamping depth.

Electro-hydraulic motorcycle jack, 600 kg


Technical specifications:
• Electrical, mechanical and hydraulic safety devices
• Capacity: 600 kg
• Integrated electro-hydraulic unit: 230V - 50 Hz
• Hydraulic pump
• Controlled downward speed
• Safety fuses for protection in case of cable cuts
• Control push button panel
• CE-certified, TÜV-approved

Injection/extraction carpet/upholstery cleaner
Highly effective for
car seats and interiors
Ideal for deeply cleaning textile surfaces.
It dispenses pressure sprayed detergent and sucks it up with dirt, leaving surfaces almost dry.

Supplied accessories:
• 1 hose complete with ergonomic handle
• 1 dispenser unit
• 2 hard extensions
• 1 small spray extraction nozzle
• 1 big spray extraction nozzle
• 6 power cord locknuts


Technical data:
• Voltage: 230/240 V
• Frequency: 50/60 Hz
• Max. power: 1100 W
• Airflow rate: 58 l/sec.
• Max. drum capacity: 20 l
• Max. detergent tank capacity: 3 l
• Max. pump pressure: 7 bar
• Max. suction pressure: 21 kPa
• Pump power: 48 W

Digital automotive multimeter


Technical Data:
• RPM (tachometer):
For 2 and 4 cylinder engines
RPM4 600 - 4000 RPM
RPM4 600 - 12000 RPM (x10 RPM)
RPM2/DIS 300 - 4000 RPM
RPM2/DIS 300 - 6000 RPM (x10 RPM)
• Dwell angle: 4-8 CYL
• DC voltage: 400mV-4/40/400/1000V
• AC voltage: 4/40/400/700V
• DC current: 40/400mA-4/20A
• AC current: 40/400mA-4/20A
• Resistance: 400Ω-4/40/400kΩ-4/40MΩ
• Capacity: 40/400nF-4/40/100µF
• Frequency: 5/50/500Hz-50/500-10MHz
• Duty cycle: 0.1 % - 99.9%
• Pulse amplitude: 1 - 10ms
• Diode test: Test current 0.3mA
• Continuity: <150Ω - Test current <0.3mA
• Display: High-contrast, backlit 4-digit LCD
• Overvoltage: Category II 1000V
• Auto power off: 30 minutes
• Power supply: 1 9V battery (included)
• Inductive clamp (included)
• 2 tips (included)
• Soft cloth case (included)
• Operating manual

Electronic multipurpose battery charger, 12-24V
25A


Features:
• Backlit graphic display
• Maximum continuous charging current: 25A
• Charging and maintenance
• Protected against polarity reversal, short circuits
• 9 charging stages
• Floating system
• SHOW ROOM function (13,8V - 21A)
• SUPPLY function (14V - 21A)
• Memory saving function (13.8V - 21A)
• Battery recovery function
• Clamp holder
• Reclining fixing hook
• Supplied accessories: cable with clamp

Technical data:
• Power supply: 220-240V
• Power: 390W
• Charging current: 5-25A
• Battery type: Agm - Wet - Lithium (LiFePo4)
• Charging capacity: 5-550Ah
• Maintenance capacity: 5-800Ah
• Output voltage: 12-24V
• Minimum battery voltage: 0.8V
• Protection degree: IP20

Ultrasonic cleaning tank, 13 l
Ideal for injectors and EGR valves
With special degas function


Features:
• Ultrasonic cleaning relies on fluid heating to effectively clean spare parts and metal pieces in general (injectors, carburettors, valves etc.)
• Digital display for temperature and cleaning time selection
• Two cleaning modes: "soft" and "normal"
• For normal cleaning, just use water at a temperature of 50/60 °C
• For more accurate cleaning, add non-foaming detergent specific for ultrasonic tanks
• Using the degas mode speeds up air release throughout the tank, thereby improving ultrasonic cleaning efficiency

Technical Data:
• Tank capacity: 13 l
• Drain tap
• Power: 300 W
• Heating power: 400 W
• Temperature range: 0÷80 °C
• Cleaning time range: 0-99 minutes
• Frequency: 40 kHz
• Power supply: 220/230V
• Overall dimensions: 350x325x320 mm
• Tank dimensions: 325x235x145 mm
• Basket dimensions: 257x185x100 mm
• Maximum capacity: 12 kg

Automatic cable reel with LED inspection lamp, 100-240Vac
Features:
● With 230/12V safety transformer
● H05VV-F 2x1.0 mm² cable
● Coiled cable length: 15 m
● 1.5 m incoming cable with SCHUKO type socket
● Length of cable out of drum: 1 m
● Rack mechanism can be disabled to keep cable pulled
● Supplied with a 180° swivel bracket and an additional quick connection bracket

Auto-darkening LCD mask, for electrode welding; MIG/MAG; TIG and plasma. Solar cells power supply and lithium batteries for outstanding LCD filter life
● Viewing area: 98x43 mm
● Darkening shade: DIN 9-13, externally adjustable
● UV/IR protection
● Light to dark time: 1/25000 s
● Dark to light time: 0.25-1s
● Adjustable darkening sensitivity and delay
● Auto on/off
● Grinding feature
● Optimized shape to make it easier to breathe with pulled-down screen

Infrared thermal camera
Compact thermal camera for contactless temperature measurement, suitable for applications in building, mechanical, electric installation and heating industries.

Features:
• LCD TFT display, 2", 240x320
• Sensor, 32x32 pixels
• Acquisition frequency 7Hz
• Thermal sensitivity <347mK
• Automatic acquisition of hot and cold spots
• Camera for acquisition of images in BMP format (max. 100 images)
• Adjustable emissivity
• Power supply: 3 alkaline AAA batteries
• USB interface
• IP54
• Temperature range: -20 °C ÷ +600 °C
• Infrared band: 6.5÷14µm
• Visible/infrared image fusion: 0.5; 1; 2m
• Alarm function, selecting acceptable maximum and minimum temperatures

Portable induction heater
Quick loosening of nuts and bolts.
Maximum safety without using flames.


Heats and loosens bolts, hubs and bearings without using flames.
Allows any type of ferromagnetic metal to be heated.

Standard equipment:
• Two front attachable coils, Ø 19 and 26 mm, for loosening nuts
• One flat coil for heating surfaces
• One flexible coil, 800 mm long
• Supplied in plastic case

Technical data:
• Input voltage: 230V AC, 50/60 Hz
• Input current: max. 7,5A
• Power: max. 1.75 kW

Optional Equipment:
• Coils are also available in other sizes

Benefits:
• Time saving: quick, extremely accurate heating
• Fire safety: does not produce flames, maximum operator safety
• Functional: can be used with one hand, and coils can be easily interchanged

Fields of Application:
• Automotive industry
• Industrial maintenance
• Aviation industry
• Naval industry
• Petrochemical industry

480x370x130 mm -  4,5 kg

Makes it possible to work on vehicles that are high from the ground and have a long shock absorber travel:

Features:
• Controlled descent speed
• Quick approach pedal
• Nylon wheels

Kit contents:
• round ball head rod, Ø 31 mm, length 110 cm
• tip rod, length 62 cm
• whale tail tip rod, length 112 cm
• hook tip rod, length 27 cm
• flat round head rod, length 50 cm
• round ball head rod, Ø 19 mm, length 52 cm
• whale tail head rod, length 27 cm
• round whale tail head rod, length, 28 cm
• fabric bag with handles

Main features
• Battery voltage: 12V
• Battery capacity: 2Ah
• Energy capacity: 24Wh
• Battery type: Li-ion

Digital brushless motor for significantly improved performance: increased power, reduced energy consumption, extended motor service life, improved power supply from button.

Features:
• 3 operating modes: drilling, screwing and impact drilling
• Compact: no more than 210 mm in length
• Ergonomic nonslip handle
• Selector switch, screwing-unscrewing-locking modes (for transportation)
• Gear case made entirely from metal
• Built-in LED light for working in poor visibility conditions
• Belt clip (right/left side)
• Additional side handle for high-torque operation
• Supplied in a hard case with 2 lithium ion batteries (4 Ah) and quick charger

Technical features:
• Max. torque: 80 Nm
• 20-position torque adjustment
• 13-mm metal auto-chuck
• Double mechanical speed with steel gears (0-450/1650 rpm)
• Max. drilling diameter in wood: 55 mm
• Max. drilling diameter in metal: 13 mm
• Max. drilling diameter in masonry: 13 mm


 5,5 kg
 490x370x125 mm

• Digital BRUSHLESS motor
Significantly improved performance: increased power, reduced energy consumption, extended motor service life, improved power supply from button

• 3 operating modes: drilling, screwing and impact drilling
• Compact: no more than 210 mm in length
• Ergonomic nonslip handle
• Selector switch, screwing-unscrewing-locking modes (for transportation)
• Gear case made entirely from metal
• Built-in LED light for working in poor visibility conditions
• Belt clip (right/left side)
• Additional side handle for high-torque operation
• Supplied in a hard case, without batteries and charger

Main features:
• Max. torque: 80 Nm
• 20-position torque adjustment
• 13-mm metal auto-chuck
• Double mechanical speed with steel gears (0-450/1650 rpm)
• Max. drilling diameter in wood: 55 mm
• Max. drilling diameter in metal: 13 mm
• Max. drilling diameter in masonry: 13 mm

Ideal for drilling in different materials, including wood, metal, plastic, masonry and concrete

Powerful 910W motor
Linear, compact design with ergonomic, non-slip handle

Metal auto-chuck, 13 mm
Reversible variable speed
Gear case made entirely from metal
Switch lock for improved comfort of use
Main features:
• Max. drilling diameter in wood: 32 mm
• Max. drilling diameter in metal: 13 mm
• Max. drilling diameter in masonry: 13 mm
• No-load speed: 0-2800 rpm
• Tangle-free power supply cord length: 4 m

Supplied accessories:
• Metal auto-chuck, 13 mm
• Additional side handle that can be rotated 360°
• Depth rod


 4,3 kg
 420x320x120 mm

Ultracompact: no more than 160 mm in length; ultralightweight: no more than 1 kg, with battery, and perfectly balanced.
Ideal for jobs in small areas, provides high torque (80 Nm), one-handed operation.

Features:
• 1/4" hexagon drive with locknut
• belt clip (right/left side)
• front LED
• selector switch, screwing-unscrewing-locking modes (for transportation)
• ergonomic nonslip handle
• gearcase made entirely of metal
• 2Ah batteries with charge indicator on impact wrench body
• supplied in a hard case with 2 lithium ion batteries (2 Ah) and quick charger (50 min)

Ultracompact: no more than 170 mm in length; ultralightweight: no more than 1.1 kg, with battery, and perfectly balanced

Features:
• Double mechanical speed with steel gears and 20-position clutch
• Torque up to 30 Nm and 1300 rpm (400 rpm in 1st gear); drills diameters up to 10 mm in steel and 20 mm in wood
• 2Ah batteries and charge indicator on drill body
• Ergonomic nonslip handle
• Front LED
• 10-mm autochuck
• Belt clip (right/left side)
• Selector switch, screwing-unscrewing-locking modes (for transportation)
• Supplied in a hard case with 2 lithium ion batteries (2 Ah) and quick charger (50 min)