Likes to go where others can’t reach. White and rust-free.
The SECUMAX CARDYCUT in white is also particularly popular as a personally printed promotional knife. Its compact design and short nose makes it extremely easy to use – for example, for curved cuts and cutting in especially narrow gaps. As a specialist for cutting thin, single-layer film it is often used, for example, in the automotive industry.

Glides over the material. And right through the middle. For "push" cutting.
You are looking for a film and foam cutter that effortlessly cuts harder and stronger film? One that's not afraid of stubborn foam? You have found the best possible solution with the SECUMAX OPTICUT. Its Teflon-coated metal foot makes it both extremely abrasion resistant and easy to slide. Glide with jam-less ease through whatever material you want to cut. Ideal for "push" cutting.

Adjustable cutting depth. You choose!
Paper, film, foam? Not a problem at all! But wait, there's more! The SECUMAX MOBILEX is the only safety knife with a concealed blade and an adjustable cutting depth. Make blade access larger or smaller by setting the in-built cutting depth adjuster. Set a depth ranging from low 2 mm to great 10 mm. It all depends on your requirements and the size of the material you need to cut.

Precise to the millimeter. In many regards.
Our safety scissors for extra fine and targeted cuts. It is playfully easy to direct, using your thumb and forefinger only. And just like its big brothers, the lightweight cuts through cardboard, paper, film, fabrics, yarn and strapping band. Your fingers and hand are protected against injuries by the special way the scissors have been sharpened in addition to the rounded tips.

The all-rounder. At work and at home.
Our all-purpose tool for professional cutting. Ideal for larger hands – or in case you wear gloves during work. Cardboard, paper, films, fabrics and much more cannot withstand its powerful cuts. You also have the best protection thanks to the special sharpening and the rounded tips. The wire-cutter facility can be used to cut through wires and cables, and the additional grips integrated in the handle to open caps.

Thumbs up – for very long cuts.
The SECUMAX 564 is characterized by its thumb opening and its extra-long edge, which also makes an ideal support surface. These safety scissors enable you to completely control your work. Moreover, you need fewer cuts to complete the job of cutting through cardboard, paper, film, fabric and much more. Highest safety guaranteed by the special sharpening of the cutting edges and the rounded tips.

Nothing stays behind except satisfaction.
The SCRAPEX 596 is the largest scraper in our product range together with the even longer SCRAPEX 5196. Use it for effortless removal of stickers, labels and other paper, colour and paint residue on all smooth surfaces. You can work especially effectively with the 100 mm long blade. Your professional tool also convinces with a non-slip handle and the built-in safeguard.

What it does? Clean work. With rounded-tip reinforced razor blade.
Labels on the floor? Remains of materials tightly stuck? You can easily clean all smooth surfaces with the SCRAPEX CLEANY. The handy scraper is made of plastic. You can push its blade out of the handle with the practical slider, and after use, push it back in again to store it safely. Blade changing is also as easy as pie.

Top forming, top form. With rounded-tip reinforced razor blade.
It really feels good, the large, rounded handle of the SCRAPEX ARGENTAX. But even the performance of this classic scraper convinces. So you can free all smooth surfaces from residue and remains with it - no matter whether at work or at home. When you're done, push the protective cap over the blade, and everything is safe.

5 in transparent pack
(10 transparent packs in multipack)

Surprisingly light. Convincingly good. With rounded-tip trapezoid blade and 9 mm cutting depth.
The SECUNORM 300 is the lightweight alternative to the SECUNORM 500. Its handle housing comprises at least 60% recycled plastic and is reinforced with fibreglass. This means that the all-round knife is ready for any number of cuts through cardboard, film, etc. And you are too! Because SECUNORM 300's ergonomic design feels comfortable even after a long day of cutting. The automatic blade retraction protects you, and the blade is quick to change.

More fun while you work? Try it out. With robust blade head.
The SECUMAX 350 is a combination of versatility, comfort and safety. A maximum degree of safety. Featuring an innovative blade change, this knife is multi-talented. It can be used to cut all standard materials, from film to plastic-strapping, from paper to 2-ply cardboard. It splits adhesive tape easily too. And it is so comfortable to hold that you won't want to put it down.

Perfect handling – from every side. With metal cap and a rounded-tip trapezoid blade.
The SECUPRO MAXISAFE has been making an impression for more than 15 years due to its lightness and wide range of applications. The safety knife has now reached new levels of ergonomic design. Just hold the 3-sided slider in your hand and try it out ... notice the difference? And it still has all the tried and tested features – such as fully automatic blade retraction, a robust handle made from high-quality plastic or the additional metal cap.

It's all easy. It's all safe.
The SECUMAX EASYSAFE convince with its special features. The prominent and pointed nose of the cutting tool easily pierces plastic sacks and film-wrapped pallets. The concealed blade easily cuts the sacks and film. An integrated material guide makes it easier to cut thin film and paper sheets; even single layers won't jam. What about thin textiles or plastic strapping band? Not a problem for the concealed blade.

Long lever. Long blade. Long-lasting enjoyment. With rounded-tip trapezoid blade.
The SECUPRO 625 is at the forefront of our ergonomic squeeze-grip knives. Its aspiration is very clear: premium. Because it offers all that professional users require: an aluminium handle, an easy and smooth lever to release the blade, a large cutting depth combined with a very high safety due to the fully automatic blade retraction and a comfortable blade change. All in all, you will know that you have a high-end cutting tool in your hands.

Our world debut. For special demands.
A long bladed safety knife? This has been a contradiction of terms for a very long time. Until now. The SECUNORM 380 is the first safety knife worldwide featuring automatic blade retraction AND a blade extension length of almost 8 cm. If you are looking for a low risk alternative to the usual fixed blade cutter, here is your answer. As an additional safety feature, we've included a transportation lock, to disable any unintended blade activity.

More leverage, more performance. With trapezoid blade.
The slimline SECUNORM MIZAR is your gateway into our world of quality squeeze-grip knives. Instead of a slider, a lever is responsible for releasing the blade. Squeeze and cut. Thanks to a relatively large cutting depth, you can use this safety knife to cut all common cutting materials. Efficiently. Its slender, no-fuss form, simultaneously allows a wide variety of cutting styles. The fibreglass-reinforced handle comprises at least 80% recycled plastic.

Surprisingly comfortable, incredibly capable.
The SECUNORM 175 enriches our range of popular small box cutters. Its unique features include the cleverly-designed and incredibly easy blade change system. Other highlights include its ergonomic handle, double-sided slider and a fresh design. The SECUNORM 175 is a versatile cutting tool that apart from cardboard boxes, also masters bags, films and strappings.

A classic, in pocket form.
The SECUNORM HANDY is compact, but don't be fooled! Being handy doesn’t mean it’s quaint. This is a cutting tool with “bite” and all the qualities required for the job. Compact yet versatile, lightweight but extremely handy, the SECUNORM HANDY is suitable for a variety of cutting applications. High frequency cutting is no problem.

At your side in an emergency.
Safety belts are important for survival. They can however be a hindrance in the aftermath of an accident. They can trap injured people in dangerous situations. The SECUMAX SOS-CUTTER provides the perfect solution. You can use it to reliably cut through any safety belt, whether as a doctor, paramedic or accident witness. The safety knife is also suitable for cutting through clothing, which in some cases also has to be removed.

Simply Heavy Metal. With trapezoid blade.
The SECUNORM MULTISAFE is a real classic. It provides excellent durability thanks to its handle made of zinc and its uncomplicated, robust design. With its notable blade extension, you can cut all standard materials. Should you have any particular requirements, you can re-fit the SECUNORM MULTISAFE with one of our many optional blades.

First-aid cutter and hammer in one.
In the event of an accident, it's paramount that you react quickly and calmly. An intuitively operable first-aid cutter with multiple uses can be a lifesaving tool. Use the SECUMAX SALVEX SOS to smash the side-window of a crumpled car. Use the concealed blade to cut through seat belts and other trapping materials, and finally, to quickly open clothing. Being able to help is a great thing!

Quality that's visible. With trapezoid blade.
Would you like to have a safety knife with a large blade extension? Or are you looking for a cutting tool that can cope with the toughest of tasks? In both cases, the SECUPRO MEGASAFE is an excellent choice. Thanks to a cutting depth of up to 20 mm, this safety knife doesn't shy away from a challenge. And no matter your task, safety is always guaranteed; the fully automatic blade retraction functions even when you decide to not fully extend the blade.

More leverage, more performance. With rounded-tip trapezoid blade.
The slimline SECUNORM MIZAR is your gateway into our world of quality squeeze-grip knives. Instead of a slider, a lever is responsible for releasing the blade. Squeeze and cut. Thanks to a relatively large cutting depth, you can use this safety knife to cut all common cutting materials. Efficiently. Its slender, no-fuss form, simultaneously allows a wide variety of cutting styles. The fibreglass-reinforced handle comprises at least 80% recycled plastic.

Quality that's visible. With stainless steel trapezoid blade.
Would you like to have a safety knife with a large blade extension? Or are you looking for a cutting tool that can cope with the toughest of tasks? In both cases, the SECUPRO MEGASAFE is an excellent choice. Thanks to a cutting depth of up to 20mm it does not shy away from any challenge. Your safety is still guaranteed since the fully automatic blade retraction functions even when you decide not to fully extend the blade. Stainless steel means that your can also use the blade in a moist environment for longer periods without problems.

Small, but nevertheless detectable.
Work with a cutting tool and at the same time keep both hands free? Surely not possible you say. But it is! The SECUMAX RING KNIFE MDP is worn on the top side of your finger. It can be used to cut film, yarn, thread and much much more. And if you drop it or lose it anytime, don't worry: it's made of a metal detectable plastic. Detectabilitiy minimises the risk of your safety knife landing in your production line.

A classic, in pocket form. With a stainless steel body and a stainless steel blade.
Do not be fooled by how compact the SECUNORM HANDY is. Being handy, doesn’t mean it’s cute, on the contrary: It is a cutting tool with “bite” and all the qualities required, even for a moist work environment. You can use the stainless steel handle and the stainless steel blade for a particularly long time. As it is both lightweight and handy it is suitable for many cutting applications even high frequency cutting.

Slider on both sides

With the right hand? With the left hand? It’s all the same here. Because we have fitted the SECUNORM HANDY with a slider that is accessible from both sides. So, anyone can really work with it!

Stainless steel

Yes, you are right, it’s a power package. Because the plastic insert of is inside a stainless steel handle. Your cutting tool is glad to go “through thick and thin” with you for a little longer.

Handy format

The SECUNORM HANDY can slip into every pocket. For times when it's not in use. When in use, you will appreciate its lightness and size. Ribbing on the slider is a grippy bonus.

Without tools

Changing blades is so easy. You do not need a tool. Pull the plastic insert out of the handle at the back, turn or change the blade, put everything back and there you have it!

4-cutting edge blade

Why do you benefit more from your blade? Because it has four sharp cutting edges. By turning and turning it over, you quadruple the usage time - and always cut again like new.

Yes, a cutting tool can be this SMART. With stainless steel blade.
Make one cut with this safety knife and you'll know immediately why it's called a SMART cut. Its light and compact shape is SMART. The fact that it is suitable for almost all types of cutting material is SMART. Automatic blade retraction in such a small housing is SMART. Its immense popularity as an attractive promotional knife definitely proves its SMARTness.

One use, two advantages

The SECUNORM SMARTCUT is a disposable safety knife. For you, that means: no risk of injury when changing the blade. The blade will also not get lost in the production process.

Slider on both sides

With the right hand? With the left hand? This question does not arise. Because we have fitted the SECUNORM SMARTCUT with a slider that is accessible from both sides. Choose for yourself!

Light and easy

At only 17 g, the SECUNORM SMARTCUT is a genuine light weight. This also contributes to quick and efficient cutting. Without hands and arms getting tired.

Perfect handling

The product does not only look handy. Its small, rounded handle really sits comfortably in your hand. And there’s much more: So that your thumb doesn’t slip, the slider has grooves.

You can’t lose it

As compact as the SECUNORM SMARTCUT is - there is an eyelet for tethering the safety knife to you or the work station.

Compact design. Powerful performance. Metal detectable.
The SECUMAX 145 is our clever, compact safety knife for routine cutting tasks – also available in an MDP version. The metal-detectable plastic handle and 0.5 mm strong blade give a robustness to the lightweight 14 g knife. Its concealed cutting edges easily cope with single-layered cardboard, film and packing tape and keep your fingers safe. And because the SECUMAX 145 MDP is always traceable, your company is kept safe too.

2-in-1 blade head

The blade head provides two functions: cutting and piercing. Use the knife's noses to the left and right of the blade to effortlessly pierce materials (e.g. card and film), and the blade head’s corners for packing tape.

Concealed blade

With a 4 mm cutting access, the blade is highly concealed. Out of reach for fingers but accessible to the materials to be cut. And contents under the cutting surface will also be kept safe from contact with the cutting edge.

Stainless steel blade

Stainless steel blades are standard in the SECUMAX 145 MDP – optimal for regular use under demanding conditions and for cleaning with water.

Metal detectable

You are on the safe side when using the SECUMAX 145 MDP in areas requiring caution. The detectors are effective in the event that the disposable tool – or parts of it – unintentionally enter the production process.

Flat and robust design

It is not just the handle that has an extremely flat design – the cutting channel too measures just 1.5 mm. Less effort is required for cutting and the tool also retains its strength – thanks to a 0.5 mm blade and high-quality plastic.

A classic, in pocket form. Metal detectable.
Don't be deceived by the compactness of this safety knife. The SECUNORM HANDY MDP might be small, but it surely can cut. It's a cutting tool with "bite" and all the qualities required for the job. The MDP version is your first choice if you're coming from either the food or medicine industry. All plastic parts are made from a metal detectable plastic. Coupled with a stainless steel blade, there are no risks with the SECUNORM HANDY MDP.

Can be metal detected

A cutting tool, or parts of it, can get lost while working. But only for a short while. Because the plastic that can be detected by a metal detector ensures you can find it again quickly.

No paint

You want to avoid risks wherever possible in your job? That's understandable. A handle without paint minimises the risk of contamination in the production process. No bits of paint can flake off and go where it shouldn't.

Slider on both sides

With the right hand? With the left hand? It's all the same. Because we have put a slider on to the SECUNORM HANDY MDP that is accessible from both sides. So anyone can work with it!

4-cutting edge blade

Why do you get more out of your stainless steel blade? Because it has four sharp cutting edges. By turning it and turning it over you quadruple the usage time, and cut like new again.

Yes, a cutting tool can be this SMART. Metal detectable.
Make one cut with this knife and you'll know immediately why it's called a SMART cut. Its light and compact shape is SMART. The fact that it is suitable for almost all types of cutting material is SMART. What's also smart, is that you can use it in sensitive industries without thinking twice. Because its plastic handle is metal detectable and it has a stainless steel blade. Good to know, isn't it?

Can be metal detected

A cutting tool, or parts of it, can get lost while working. But only for a short while. Because the plastic that can be detected by a metal detector ensures you can find it again quickly.

One way, two advantages

The SECUNORM SMARTCUT MDP is a disposable safety knife. What that means for you: no risk of injury when changing the blade. The blade also cannot get lost in the production process.

Slider on both sides

With the right hand? With the left hand? The question does not arise. Because we have put a slider on to the SECUNORM SMARTCUT MDP that is accessible from both sides. Choose for yourself!

Perfect handling

The product does not only look handy. Its small, rounded handle actually fits very well in your hand. What's more: the slider is fitted with grooves so that your thumb doesn't slip.

The SECUMAX 150 MDP resolves several issues in one. With its concealed blade, you will never have to worry about injuring yourself or damaging your goods. Thanks to its versatility, you only need the one tool to cut, scrape and split. Main customer benefit: specially designed for sensitive manufacturing processes, the SECUNORM 150 MDP is made of metal detectable plastic to ensure that it is always retrievable.

Metal detectable

You are on the safe side when using the SECUMAX 150 MDP in areas requiring caution. The detectors are effective in the event that the disposable tool – or parts of it – unintentionally enter the production process.

Stainless steel blade

Stainless steel blades are standard in the SECUMAX 150 MDP – optimal for regular use under demanding conditions and for cleaning with water.

3-in-1 blade head

The SECUMAX 150 MDP fits like a glove. It's so comfortable to hold, that it feels like an extension of your hand. With it you can cut cardboard, split tape, open plastic strapping… you can even scrape residue off surfaces.

Concealed blade

This safety knife doesn't need a sharp tip to be a smart knife. The blade is securely concealed so that it presents no risk to you or your goods when opening packages.

Ergonomically shaped

Right handed? Left handed? It’s really all the same. Because the SECUMAX 150 MDP perfectly fits any hand – even in gloves. The large handle surface feels particularly pleasant as a secure place for the thumb, fingers and hand.

A safety knife that also performs as a cutter? The new SECUBASE 383 can be both. Your cutting tool is equipped with automatic blade retraction to prevent cutting injuries. Some cutting tasks, such as saw cuts, however, are easier with a fixed blade. The blade can therefore be locked in seven different positions to enable efficient working.

Long blade extension

"Long" is actually an understatement: the blade can extend to a maximum of 7.8 cm. The SECUBASE 383 can then be used for the safe and easy cutting of materials such as 4-ply cardboard boxes, bagged goods, paper rolls, building foam and polystyrene sheets.

Locking and retraction

A choice of seven settings (cutting depths from 7 mm to 73 mm) is available when you want to use your SECUBASE 383 as a cutter. Afterwards, release the lock and the blade will retract as usual.

Ergonomic handle

The SECUBASE 383 has a consistent ergonomic design to protect your hand. The slightly tapered handle is very comfortable to hold. Another ergonomic feature is the slider, which is particularly easy to move because of its built-in ramp.

For right and left hander

The SECUBASE 383 is supplied ready for use by right-handers. Left handers just need to turn the blade by 180° to start cutting. The slider and the lock are operated with the thumb.

Easy blade change

To access the long, flexible blade, use the blue blade change button at the end of the handle. You can now pull out the inner section including the slider. The blade is held in position by two magnets.

Our SECUNORM PROFI25 MDP is aptly named. "PROFI" because this safety knife really does behave professionally. Whatever the situation, whatever the cutting material. The "25" is in reference to its impressive blade extension of 25 mm, with which even 3-ply cardboard can be cut. And finally, the "MDP" tag means that all plastic parts of this knife can be detected by a metal detector.

Metal detectable

While working, a cutting tool – or parts of it – can sometimes get lost. But only for a short while. Because the plastic that can be detected by a metal detector ensures that you find it again fast.

No paint

You would like to avoid risks in your job, wherever possible? That's understandable. An unpainted handle minimises the risk of contamination of the production process.

Robust handle

The plastic insert of the SECUNORM PROFI25 MDP is in an aluminium handle. With its robust design, it is predestined for high cutting frequencies and a long life.

2-cutting edge blade

Before you have to change the quality blade, you can turn it around once. This doubles the usage time of the blade – and reduces the energy you use up. Because your product cuts like new again.

Tool-less blade change

Blade changing is quick to work out. Literally. You just need to slide the metal detectable plastic insert out of the handle and replace the old blade with a new one.

Doing the dirty work. With rounded special blade.
The SECUNORM 610 XDR is the first universal bag opener that cuts efficiently AND safely. Use it to open bags of any kind and thickness, and any content. XDR means eXtra Dirt Resistant, i.e., even dusty, liquid or sticky contents won’t stop the safety knife. The blade automatically retracts after cutting on releasing the lever. Users are then also resistant – resistant to cutting injuries.

Dirt protection

The SECUNORM 610 XDR's open design has several benefits. Dust and other particles won't stick and moveable parts stay moveable. The lever and blade retraction features then continue to function even under the most difficult conditions.

Easy to clean

Extra tough dirt is also no problem! Open the lever downwards to expose the components. Everything can now be cleaned as required, e.g., with compressed air, water or acetone. But remove the blade first!

Long, stainless special blade

The new, extremely sharp LARGE SPECIAL PURPOSE BLADE NO. 160060 has a 32 mm cutting depth. Ideal for quick and safe cutting of everything from a simple foil bag to multi-layer kraft paper with inliner.

Practical 3-in-1 lever

The bag opener is one of MARTOR's highly ergonomic squeeze-grip knives. The lever is smooth and finger-light to operate. It can be securely locked in place or folded out of the handle for blade changing.

Robust and detectable

Advanced ergonomics are not the only special features of the SECUNORM 610 XDR. The aluminium, unpainted handle and plastic components are also very robust for professional use. All parts are stainless and metal detectable.

Safety knives that are both disposable and sustainable? Of course! The SECUMAX 148 is made with more than 80% recycled plastic. The glass fibre reinforcement and the robust, 2-cutting edge blade head ensure longer service lives. This makes SECUMAX 148 ideal for tougher cutting tasks. The ergonomic handle and lightweight design will also aid safe and efficient working.

Robust blade head

The plastic-covered blade head is particularly robust with a blade thickness of 0.5 mm. This SECUMAX 148 can therefore take on especially difficult cutting materials in logistics and production.

Robust blade head

The plastic-covered blade head is particularly robust with a blade thickness of 0.5 mm. This SECUMAX 148 can therefore take on especially difficult cutting materials in logistics and production.

Clever guide surfaces

Another reason why the SECUMAX 148 can cut through cardboard so easily? The guide surfaces located right at the front of the safety knife help you to cut at an angle. Angled cutting means less material resistance!

Ergonomically shaped

Right handed? Left handed? It’s really all the same. The SECUMAX 148 fits perfectly in any hand. Gently arched outer edges, coupled with light ribbing and a low weight, ensure an ergonomic experience.

Sustainably built

MARTOR prioritises sustainability. SECUMAX 148 is the first MARTOR disposable knife to use only glass fibre reinforced recycled plastic. Its low weight also means materials have been used sparingly.

Automatic blade retraction ensures high safety
As soon as you start cutting, release the slider - so the blade immediately disappears back into the handle after cutting
Suitable for right and left handers
Blade change button enables tool-free blade change

The SECUMAX 350 SE is our sustainable all-rounder. The black handle is made of 98% recycled plastic. The interchangeable 2-in1 blade head also gives the knife an extended service life. It cuts all common materials from film and plastic strapping band through to 2-ply cardboard. The concealed blade protects users as well as packaged goods. It can also easily split adhesive tape.

The SECUMAX 350 is a combination of versatility, comfort and safety. A maximum degree of safety. Featuring an innovative blade change, this knife is multi-talented. It can be used to cut all standard materials, from film to plastic-strapping, from paper to 2-ply cardboard. It splits adhesive tape easily too. And it is so comfortable to hold that you won't want to put it down.

The SECUMAX 150 resolves several issues in one. With its concealed blade, you will never have to worry about injuring yourself or damaging your goods. Thanks to its versatility, you only need the one tool to cut, scrape and split. And with its 24 grams and ergonomic design, the SECUMAX 150 won't weigh you down with fatigue after a day of cutting. In short: it is the cutting tool you have been waiting for.

Fantastically ergonomic, this MARTOR safety knife has a soft-grip handle, easy to activate trigger lever, and a robust aluminium body. Its fully automatic blade retraction ensures that the blade immediately conceals itself as soon as you’ve finished cutting, while a safety lock offers reassurance against accidentally triggering the lever. Its small cutting depth helps to keep contents safe when opening packaging too.

Robust, lockable safety knife suitable for a variety of cutting duties
Changing the blade is safer due to the built-in magnet to secure storage of blade inside handle
Fully automatic blade retraction make this knife extremely safe to use and prevents unwanted injuries
Safety lock feature ensures prevention of cuts