The Guide Clamp features integral clamping jaws and a locking lever that provides quick way of clamping the guide batten. It is ideal for holding and clamping workpieces and the aluminium extrusion incorporating T-slots. The clamp is fitted with a metric/imperial scale for setting lengths and stop positions and the scale can be be positioned by removing 20mm of the self-adhesive backing.

The Trend VJSAG36 is an adjustable angle guide to allow grooving with the router, or crosscutting with a circular saw. It has an adjustable angle range from 25 to 155 and preset angle for 30, 45, 60, 90, 120, 135 and 150. The router working length at 90 is 915mm (36 inch), the circular saw working length at 90 is 780mm (30 3/4 inch). It has an angle tolerance 0.2 with zeroing facility, adjustable position alloy extrusion with scale and requires three clamps. Will accept accessory friction clamps Ref. VJS/CK or VJS/CK/L.

This TCT Countersink clamps onto any drill between 3 mm and 7.2 mm in diameter. The drill passes through the body of the countersink and is secured by two hexagon bolts which clamp the countersink onto the drill at the required position. Recommended for wood and man made boards.By reversing the countersink on the drill the UNI / CS can be used as a non-cutting depth stop. NOTE:- Drills not included.

The Unibase enables routers with non-standard guide bush fittings to accept the range of Trend guide bushes. Will fit directly to most routers.Line-up pin used with a 16 mm plastic bush to ensure concentricity of the cutter to the guide bush when fitting the sub-base. Suits collet sizes 1/4inch, 8mm, 12 mm and 1/2inch. Instructions for fitting The line-up pin fit into the collet and is plunged through the router base. The line-up bush is fitted into the Unibase and secured. This is then placed over the line-up pin and rotated in order to line up the fixing holes. The Unibase screws are tightened and then the line-up bush can be replaced with any choice of Trend guide bushes. These range from 10 mm up to 30 mm (GB10 - GB32). For larger diameter cutters a 40 mm guide bush (GB40) is available.

This robust T-Square in Tufnol provides an instant means of squaring off, marking out, setting up jigs etc. Can be hung up when not in use. Length: 680mm.

Kitchen fitters pack containing 5 x TR17 X 1/2 TC Cutters. 12.7 mm x 50 mm.

The TR40D has a center tip for drilling abrasive materials. Dimensions:Shank: 1/2inCutting Diameter (D): 15mmCutting Length (C): 25mm

The TR37 is suitable for use use with Trend Lock JigsDimensions:Shank: 1/2 inCutting Diameter: 12mmCutting Length: 63mm.

The Trend TR35 Biscuit Jointer Set enables biscuit jointing with timber, man-made fibre and particle board. The right choice of bearing will ensure the correct depth of cut for biscuit sizes No. 0, 10 20. Specifications:Shank: 1/4in.Cutting Diameter (D): 37.2mm.Cutting Length (C): 4.0mm.

Trend TR30 Trade Shank Mounted Guided Profiler with extra-long shank ideal for trimming and profiling timber, man-made board. Features 2mm micro grain tungsten carbide tips, for cutting the most abrasive materials to give extra-long life. The cutter is PTFE coated, indicated by distinctive black colouring.The guide profiler can be used on hardwood and softwood, fibreboard, plywood and particle board, and has the dimensions etched on the extra-long 40mm shanks, for quick identification. Specifications:Shank: 1/2in.Cutting Diameter: 19.1mm.Cutting Length: 50.0mm.

Trend TR29 Trade range Shank mounted guided profiler with extra long shank ideal for trimming and profiling timber, man-made board. Features 2 mm micrograin tungsten carbide tips, for cutting the most abrasive materials to give extra long life. The cutter is PTFE coated, indicated by distinctive black colouring. The guide profiler can be used on hardwood and softwood, fibreboard, plywood and particle board and has the dimensions etched on the extra long 40 mm shanks, for quick identification. Dimensions:Shank: 1/4in.Cutting Diameter (D): 12.7mmCutting Length (C): 25.4mm

The Trend TR28 Trade Bearing Guided profiler with an extra-long shank is ideal for trimming and bevelling timber, lippings and plastic laminate edges. Features 2mm micro grain tungsten carbide tips, for cutting the most abrasive materials to give extra-long life. The cutter is PTFE coated, indicated by distinctive black colouring.The dimensions are etched on the extra-long 40mm shanks for quick identification. Specifications::Shank: 1/2in.Cutting Diameter: 12.7mm.Cutting Length: 25.4mm.

TR18D have a centre tip for drilling abrasive materials. Dimensions:Shank: 1/2 inCutting Diameter (D): 12.7mm (1/2 in)Cutting Length (C): 63mm

TR17D have a centre tip for drilling abrasive materials and are designed to work with the Trend Worktop jigs Dimensions:Shank: 1/4inCutting Diameter (D): 12.7mmCutting Length (C): 50.0mm

TR12 features a solid carbide insert and centre tip for drilling. Dimensions:Shank: 1/4inCutting Diameter (D): 12mmCutting Length (C): 19mm

Tooling Tungsten Carbide1/4in Shank.Angle A = 90° D = 9.5 mmC = 12.7 mm

Tooling Tungsten Carbide1/4in Shank.Angle A = 90° D = 12.7 mmC = 25 mm

Tooling Tungsten Carbide1/2 in Shank.Angle A = 90° D = 12.7 mmC = 25 mm

The Trend T421/35 hinge cutter is typically used by kitchen unit manufacturers and fitters for cutting 35mm blind holes ready to accept recessed circular hinges, it has a TCT blade for longer life.This bit is best suited for use on thinner section laminate covered board.Diameter - 35mmShank - 1/4in

Hinge Sinkers for drilling machines. TCT Hinge sinking cutter for pillar drills only. Designed for recessing holes in melamine covered chipboard to receive circular hinges. Diameter. 35mm.Shank. 8mm.

This Trend STAIR/AStaircase Jig is a template jig with well proven means of routing out stair housings quickly and accurately. It is constructed from hard wearing compact grade high pressure laminate and includes a reversible fence for exact matching of stair strings and fully adjustable nosing piece. It has a built-in heavy duty front clamp for quick clamping for each trench.It is adjustable to suit private and common stair angle pitches and can be used with all heavy-duty routers over 1600 watts. The sub-base is pre-drilled to suit Trend/DeWalt/Elu 1/2-inch routers, for other makes the sub-base will have to be redrilled. Kit includes:-1 x Adjustable reversible clamp.1 x Reversible clamp bar.1 x Sub-base.1 x Nose piece.1 x Line up pin and bush.2 x Spanners.Specifications: Tread Thickness: 22-32 mm.Slider Diameter: 30 mm.Nosing Adjustment: 16-19 mm.Length: 585 mm.Height: 485 mm.Width: 12.5 mm.Weight: 6.17kg.

Trend SET/SS9TC 15 Piece Router Bit Starter Set contains a range of popular 1/2in tungsten carbide tipped cutters for a variety of applications. Suitable for softwood, hardwood, chipboard, plywood and MDF. Supplied in a plastic carry case. Contains: 1 x Single Flute: 4.8 x 11mm.3 x Two Flute: 6.3 x 19mm, 12.7 x 25mm and 19 x 25mm.1 x Dovetail: 12.7mm.2 x Guided Round Over: R9.5mm and R12.7mm.1 x Guided Chamfer: 45.1 x Guided Roman Ogee: R4mm.1 x Guided Trimmer: 12.7mm.2 x Guided Cove: R6.3mm and R12.7mm.1 x V-Groove: 45.1 x Core Box: R6.35mm.1 x Guided Rebater: Rebate 11.1mm.

Trend 12 Piece Router Bit Starter Set contains a range of the most widely used cutters for decorative woodworking. Made from tungsten carbide with 1/4in shanks and supplied in a plastic carry case. Contains: 2 x Straight: 6.3 x 16mm and 12.7 x 19mm.1 x Dovetail: 104 x 1/2in.2 x Guided Round Over: R6.35mm and R9.5mm.1 x Guided Chamfer: 45.1 x Guided Rebater: 9.5mm.1 x Guided Trimmer: 12.7mm.1 x Guided Cove: 6.3mm.1 x V-Groove: 45.1 x Core Box: R6.35mm.1 x Guided Ogee: R4mm.

This Trend 1/4in Router Cutter Set has a range of tungsten carbide tipped cutters for decorative woodworking. Suitable for softwood, hardwood, chipboard, plywood and MDF. Supplied in a plastic carry case. Contains: 2 x Straight: 6.3 x 16mm and 12.7 x 25mm.1 x V-Groove: 45 x 12.7mm.2 x Guided Round Over: R6.35mm and R9.5mm.1 x Guided Ogee: R4mm.

This Trend 1/2in Router Cutter Set has a range of Tungsten Carbide Tipped cutters for decorative woodworking. Suitable for softwood, hardwood, chipboard, plywood and MDF. Supplied in a plastic carry case. Contains: 2 x Straight Cutters: 6.3 x 16, 12.7 x 25mm1 x V-Groove Cutter: 45 x 12.7mm2 x Guided Round Over: R6.35mm, R9.5mm1 x Guided Ogee: R4mm

The Trend 50 Piece Router Bit Starter Set contains a range of popular 1/4in tungsten carbide tipped cutters for a variety of applications. Suitable for softwood, hardwood, chipboard, plywood and MDF. Supplied in an aluminium carry case. Contains: 2 x Single Flute Straight: 3 x 12.7mm and 4 x 12.7mm.8 x Two Flute Straight: 6 x 16mm, 8 x 19mm, 9.5 x 19mm, 12.7 x 19mm, 14.2 x 19mm, 15.9 x 19mm, 19 x 19mm and 20 x 19mm.4 x Guided Flush Trim: 9.5 x 12.7mm, 9.5 x 25.4mm, 12.7 x 12.7mm and 12.7 x 25.4mm.1 x Combination Bevel: 12.7mm x 60.1 x Mortiser Cutter: 12.7 x 12.7mm.1 x Classic Panel Cutter: 12.7 x 9mm.1 x Keyhole Cutter: 9.5mm.3 x Core Box: R3.2, R4.8 and R6.35mm.2 x Long Series Core Box: R4.8 and R6.35mm.2 x 60 V-Groove: 9.5mm and 16mm.2 x 90 V-Groove: 9.5mm and 12.7mm.4 x 14 Dovetail: 9.5mm, 12.7mm, 14.3mm and 16mm.1 x Pierce Trim: 6.35 x 18mm.2 x Guided Cove: R6.35 and R9.5mm.4 x Guided Round Over: R3.2, R6.3, R7.9 and R9.5mm.4 x Guided Ovolo: R3.2, R6.35, R7.9 and R9.5mm.2 x Guided Roman Ogee: R4 and R6.35mm.2 x Guided Chamfer: 25 and 45.2 x Guided Slotter: 6.35mm kerf and 9.5mm kerf.1 x Guided Rebater ( x cut): 28 x12.7mm, Rebate: 9.5mm.1 x Guided Classic Decor: R9mm.

The Trend Solid Tungsten Carbide two flute cutters are turned, milled and ground from a solid piece of Tungsten Carbide and provide the greatest durability when used under stress load conditions. They offer better plunge cutting characteristics than TCT.Dimensions:Shank: 1/4inCutting Diameter (D): 6.3mmCutting Length (C): 28.0mm

The Trend Rota - Tip Replacement Screws are tapered head replacement screws for Trend Rota- Tip router cutters. They are high quality replacement screws providing the correct fixings to secure the Rota-Tip blades for maximum performance.The Torx head fitting ensure secure tightening pressure when fitting blades, the 6mm tapered head provide correct clamping pressure to the blades for safe operation and ensures the Rota-Tip cutters are always ready to go. Specifications: Head type: tapered x 6 mm diameter.Thread: M3.5 x 0.6.Thread length: 5 mm.Driver type: Torx.

The Trend Rota-Tip Cutters are highly economical for use in production applications. The blades, which are manufactured from a harder grade of tungsten carbide than conventional tooling is rotated to expose a new cutting edge ensuring the diameter of the tool remains constant.The Blades are replaced when all edges become chipped or dull. They are fixed directly onto tool bodies using Torx screws and may be replaced without removing the cutter from the router. All Rota-Tip cutters are supplied with blade(s) fitted and a Torx key. Specifications: Cut Length: 29.5mm.Overall Length: 89mm.Cut Diameter: 12.7mm.Shank: 1/2in.

The Trend RB/B is a spare Replacment solid carbide Rota-Tip Blade to suit Rota Tip Cutters. Specifications: Length. 49.5mm.Width. 12mm.Thickness:1.5mm.Holes: 2.Hole Diameter: 4mm.Hole Centers: 26mm.End Clearance: Yes.

The Trend RB/A/10 Replacement Blades are high quality solid carbide replacement cutters for Trend RT/04, RT/05, RT/06, RT/07, RT/08, RT/10, RT11, RT/11M, RT/15, RT/16, RT/17 and RT/71 straight cutters. The blades can be rotated 180 giving two cutting edges for longer lifespan between cutter changes. They are ideal for working with hard or softwoods and abrasive materials including chipboard, ply and MDF. These blades fit to the range of compatible Trend Rota-Tip cutters for worktop joint cutting, edge work, rebating and trimming work with templates. Pack of 10 blades giving 20 cutting edges. This Trend product is an affordable solution, ideal for trade and commercial users. Length: 29.5mm.Width: 9mm.Thickness: 1.5mm.Holes: 2.Hole Diameter: 4mm.Hole Centres: 14mm.End Clearance: Yes.Specification: Pack Quantity: 10.

The Trend PH/JIG/BS Single Pocket Hole Jig is for fast and accurate joining of solid timber and plywood giving strong instant joints in single or multiple fixing positions. It can help to build cabinets, furniture and small joinery projects with ease. The hardened drilling sleeves provide accurate, consistent pockets. There is also a handy built-in drill depth gauge that can be reversed for new or repair work. Works with timber thicknesses from 12mm to 38mm. Portable and adaptable. Supplied with: 1 x Pack of Assorted Screws, 1 x 150mm Square Drive Bit and 1 x HSS Drill Bit with Collar.

Trend PH/JIG/BK 3-in-1 Pocket Hole Jig for fast and accurate joining of timber and plywood, giving strong instant joints. Multi-function design for twin hole or single hole pockets, perfect for wide or for narrow stock components. With reversible depth gauges, ideal for new projects and repair work. Hardened drilling sleeves for accurate, consistent pockets. Works with timber 12.7mm to 38mm thick. Portable and adaptable for multiple jointing styles and applications with tool-free, fast and easy set up. Build cabinets, furniture and small joinery projects with ease. Supplied with: 50 x Assorted Screws, 1 x HSS Drill Bit with Collar, 1 x 150mm Square Drive Bit, 1 x Adaptor Plate, 1 x Hex Key 3mm A/F and 1 x Carry Case. Specification: Timber Thicknesses: 12.7-38mmHole Pitch: 28-50mm

The Trend PH/JIG Pocket Hole Jig is supplied with: 100 x Dome Head Screws, 1 x Face Clamp, 1 x HSS Drill Bit With Collar, 1 x 75mm Square Drive Bit, 1 x 150mm Square Drive Bit.

This replacement stepped drill bit for the Pocket Hole Jig has a diameter of 9.5mm (3/8in).

The world's fastest professional worktop scriber tool. It completes traditional scribing chores with precision, speed and ease. Quick and easy-to-use by remaining stable whilst scribing directly onto work surfaces, flooring, shelves etc. It works by running a wheeled scribe unit along an irregular feature. The sprung pencil in its centre will accurately copy the profile directly onto the workpiece to be installed. It can then be cut and fitted to the surface resulting in a perfect butt! Four sizes of quick-fit track wheels to cope with a variety of situations. Design Reg. No. 3014615. Includes: 1 x pencil, 1 x body, 1 x 29mm wheel, 1 x 50mm wheel, 1 x 70mm wheel, 1 x 90mm wheel.

The Trend Mortice Tenon Jig MT/JIG enables mortice, tenons and dowel joints to be cut with a router. Ideal for cabinets, chairs and table joints. There is a one set-up system for both mortice and tenon giving perfectly fitting joints and is fully adjustable for compound angle joints up to 45. The reversible templates can be used to produce round and square end tenons and for accurate dowelling applications. It cuts mortice and tenon sizes of 1/4in (6.35mm) to 5/8in (15.9mm). A Unibase may be required for certain makes and models of router. All tenons are cut with a 5/8 inch diameter straight cutter (Ref. C026). The width of the tenon is adjusted by using different guide bush diameters. International PCT Appl N.CNC precision manufactured plates and body. Guide bushes are included but cutters are required. Specification Material Thickness: 12 - 47mm.Tenon Thickness: 4.8 - 16mm.Angle Tilt Compound: -10 to 45.

The Trend MS/PRO Multiscribe Profile Matching Tool scribes internal and external curves, marks parallel lines with fast, easy adjustable backset to suit the scribing gap. It also has a square and mitre function for layout work with precise 5mm increments on the blade, ideal for accurate checking and transferring depths of mortices, grooves and rebates. The two accurate pencil positions allow for marking narrow and wider circles and arcs or transferring scribe marks backsets. Other features include: a built in spirit level, plumb bob function and pencil sharpener for increased precision, diversity and usefulness in any situation.

The jig requires a router fitted with a 30mm guide bush and 12mm diameter long reach cutter. For most common sash mortice and dead locks with up to 3in deep mortices and a 7/8in or 1in face plate. Deeper mortices can be achieved with a suitable size of auger bit. Also suits face plate on a 1in mortice latch. NOTE. Use on doors 34 to 58mm thick

The Trend Loc Block consists of four interlocking gripping blocks that lock together to allow the workpiece to be held in place when sanding, drilling and finishing. No need to use clamps. Sets up in seconds by gripping the workpiece and bench, raising the workpiece from the bench, to allow complete access to every edge. Size when four blocks interlocked 173mm x 173mm.

This pack contains 4 spare location pins, which are suitable for the KWJ700 and KWJ900 worktop jigs. Made from ABS plastic for strength.

Tradesman ALL IN ONE work top jig for up to 900 mm worktops. Hard wearing solid laminate 12 mm thick jig that cuts both parts of the joint in 15-minutes including setting up and left hand and right hand corners, 400 mm radius peninsular joint, 45 degree end cut with slight radius, 45 degree trade corner solution for hob units, 100 mm radius corner, 40 mm radius corner, 35 mm kitchen door hole and 3/4 inch BSP hole for mixer taps. It covers fixed lengths for 400 mm, 500 mm, 550 mm, 600 mm, 616 mm, 650 mm, 700 mm and 900 mm wide worktops and can cuts up to 40 mm thick worktops with or without anti-drip postformed edge. Three open-ended bolt recesses (dog bone style) for 150 mm bolts. Engraved lines for short 65 mm bolts and worktop cross-cut. 10 mm diameter plastic pins with tapered shoulder for tight fit provides three point pin contact to ensure ease of setting up. Engraved markings for identification of pin holes. Specification:Length: 1185 mm. Width: 390 mm. Thickness: 12 mm. Weight: 7.7 Kg. End cut: 45 degrees. Corner radius: 40 mm. Corner radius: 100 mm. Corner radius: 400 mm. Corner mitre joint: 45 degrees.

The KWJ700 has fixed lengths for 250mm, 300mm, 400mm, 500mm, 550mm, 600mm, 616mm, 650mm and 700mm worktops. Length: 985mm.Width: 390mm.Thickness: 12 mm.Weight: 5.4 kg.End Cut: 45.Corner Radii: 40mm, 100mm and 400mm.Corner Mitre Joint: 45.Female cut material width loss: 35 mm.

Trend Kitchen Worktop Jig for worktops up to 650mm. Made from hard-wearing, CNC machined Compact Grade High-Pressure Laminate, 12mm thick. Cuts both parts of the joint in 15 minutes, including setting up. For cutting: left and right-hand corners, 400mm radius peninsular joint and 35mm kitchen door hole. With fixed lengths for 600mm, 616mm, 635mm and 650mm wide worktops. Cuts worktops up to 40mm thick, with or without anti-drip postformed edge. It can also be used to cut 2 open ended bolt recesses (dog bone style) for 150mm bolts. 10mm plastic pins with tapered shoulders for tight fit provides 3-point pin contact to ensure ease of setting up. The pins are made from ABS plastic for strength.

The Trend Skeleton Hinge Jig is a 2-part, adjustable portable template set designed for recessing hinges in wooden doors and frames with a router. It is easy to use with minimal setting-up time, ensuring the job can be completed accurately and quickly. It is ideal for use on-site and in joinery shops to increase productivity with excellent results.The jig has fully adjustable apertures for fire door requirements and renovation work. It is ideal for fitting a new door into an old frame and is suitable for timber-based doors and square butt hinges. The jig is supplied with a carry case, bradawls and a special 16mm guide bush. Specifications:Pre-set hinge sizes: 20mm, 25mm and 30mm. Hinge sizes possible:Minimum length: 67mm (2.5/8in).Maximum length: 127mm (5in).Minimum width: 12.7mm (1/2in).Maximum width: 35mm (1.3/8in). Door sizes possible:Minimum height: 1,956mm (6ft5in).Maximum height: 2,100mm (6ft10in).Minimum thickness: 16mm (5/8in).Maximum thickness: 51mm (2in). Weight: 2.9kg.Overall length: 1,956mm.

A 2-part hinge jig, portable template set designed for recessing hinges in wooden doors and frames.It is easy-to-use with minimal setting-up time, completing the job both accurately and quickly.Used on-site and in joinery shops to increase productivity with excellent results.Four apertures for fire door requirements.No need for marking out in the conventional way.Quick and simple to set-up as the hinge is used as the pattern.Clean and accurate recesses are achieved every time. Suitable for timber based doors and square butt hinges.Use with a light-duty router with 1/4 inch collet.Long reach router cutter required, 12 mm diameter with 70 mm overall length.Angled position slots to prevent creep. Hinge sizes possible: Length min: 2 5/8 in (67 mm). Length max :5 in (127 mm). Width min :3/8 in (9.5 mm). Width max: 1 3/8 in (35 mm). Door sizes possible: Height min: 6 ft 5 in (1955 mm). Height max: 6 ft 10 in (2100 mm). Thickness min: 5/8 in (16 mm).

The Trend Hinge Jig is a portable template set designed for recessing hinges in wooden doors and frames. Used on-site and in joinery shops to increase productivity with excellent results. Four apertures for fire door requirements. No need for marking out in the conventional way. Quick and simple to set-up as the hinge is used as the pattern. Clean and accurate recesses are achieved every time. Suitable for timber based doors and square butt hinges. Use with a light duty router with 1/4inch collet. Long reach router cutter required, 12mm diameter with 70mm overall length. Angled position slots to prevent creep. Patent No. GB2285410. Includes: 4 x Apertures, 2 x Bradawls, 1 x 16mm Guide Bush, 1 x T-Handle Hex Key, 1 x 4mm Spacing Gauge and 1 x Plastic Storage Tube. Specification Hinge Sizes Possible: Length Min/Max: 67-127mm (2.5/8-5in).Width Min/Max: 9.5-35mm (3/8-1.3/8in). Door Sizes Possible: Height Min/Max: 1955-2032mm (6ft 5in - 6ft 10in).Thickness Min/Max: 16-44mm.

Round sub base can be used as a guide itself.Supplied with:-10 mm guide bush, 1/4in and 1/2in shank line up pin and bush and fixing screws.Will fit:- DEWALT DW620, 621, 624, 625EK, 629, Elu OF97(E), MOF131, 177(E), Bosch GOF1600A 1700ACE and Makita RP0910, 0111C and B Q CLM2050R, 1250R, 11/03.

Trend guide bushes can be attached to the base of the Router. They are designed to follow the contours of a template.. Outside diameter: 30mmInside diameter: 27mmProjection from plate: 6mm

Guide bush guides the router when using a template. Fits directly to Trend T3,T4,T5,T5 MK2, T9,T10 and T11, and some other light duty routers. Will fit other makes when used with GB/5, GB/PLATE or UNIBASE Sub-base. Outside diameter: 18mmInside diameter: 15mmProjection from plate: 6mm

Guide bush guides the router when using a template. Fits directly to Trend T3,T4,T5,T5 MK2, T9,T10 and T11, and some other light duty routers. Will fit other makes when used with GB/5, GB/PLATE or UNIBASE Sub-base. Outside diameter: 16mmInside diameter: 14mmProjection from plate: 10mm

Guide bush guides the router when using a template. Fits directly to Trend T3,T4,T5,T5 MK2, T9,T10 and T11, and some other light duty routers. Will fit other makes when used with GB/5, GB/PLATE or UNIBASE Sub-base. Outside diameter: 12mmInside diameter: 9mmProjection from plate: 6mm

Trend GAUGE/D60 Digital depth gauge for router tables and saw benches. Horizontal and vertical measuring, ideal for hand routers, router tables and saw benches. It has an LCD readout for mm, imperial and fractions with auto shut off 5 mins. The removable pin allows hole depths to be measured. The pin can be parked on arm. Hole depth 50.8mm (2 inch).

The Trend Gauge/1 is a metal rule Depth Gauge to accurately set the height of router cutters and saw blades. It will measure both horizontal and vertical, for hand router, router tables and saw benches. It has a 60mm wide aperture and is accurate to 0.5mm with an 80mm measurement range.This Trend gauge has U section plastic injection moulding with unique cam lever lock, and a steel rule with metric and imperial scale. The gauge is self-standing for setting cutter depth on router tables and low profile for back fence adjustment.

The Trend Door Stand holds the door on its edge while routing hinge recesses and mortices for locks. Holds door securely. Non-scratch base. Adjustable clamp for doors 32 to 55mm thick. Allows door to be tilted back to assist fitting into the frame. Maximum door weight 50kg.

The Trend Draining Groove Jig is perfect for routing draining grooves in solid timber for Belfast type sinks. Made from 12mm hardwearing CNC machined phenolic. It provides a 0.5 fall with grooves at 50mm pitch and 455mm long. With sight marks for lining up and three removable sloping runners for support. There is also a cutter diameter check hole and fixing holes for user made stops for repetitious work. Includes: 1 x Cove Cutter and 1 x Guide Bush (diameter 30mm). Specification Fall: 0.5.Groove Pitch: 50mm. Groove Length: 455mm. Slat Width: 19.8mm.

Professional TC Worktop Cutter Two flute cutter with a 12.7 mm (1/2in) diameter.TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Advanced automated grinding improves the carbides resistance to wear.Up to 200% longer life when cutting abrasive materials.Cleaner cut than other existing carbides.Final results life that makes it the most cost effective carbide today. Includes 10 x 383DX12TC Cutters in a gravity dispenser box. Ideal for display on a trade counter or can be hung on a peg.

Holds door while drilling and fitting locks. No set-up time needed. No more searching and alternative door stops. Padded to prevent door and floor damage. For doors up to 55 mm thick. Patent No. PCT/EP2006/006072.

The Trend CR/DWS/F4/FC is a 4 inch double sided diamond stone with folding handle and monocrystalline diamonds for fast, clean, stock removal which gives excellent sharpening performance. It is double sided for coarse sharpening and fine honing: Coarse 360 grit (nom. 40 microns) and fine 600 grit (nom. 25 microns). The Coarse is ideal for carpentry as it rapidly fixes or restores a damaged edge or blunt tools, including chisels and plane irons. The Fine is ideal for cabinet making for a fine finish and refines the cutting edges of chisels, small knives, etc - achieves a razor edge in seconds. With plastic ABS folding handle, that folds to protects diamond surface and oval holes design to collect and hold metal residue. Ideal for saw blades, chisels, knives, domestic and garden tools. Recommended use with Trend lapping fluid to prevent clogging or rusting and assist in keeping tools clean.

The Trend CR/DWS/CC/FC is a double-sided credit card size diamond stone. It has monocrystalline diamonds for fast, clean, stock removal and excellent sharpening performance. Double sided for coarse sharpening and fine honing. Coarse 360 grit (nom. 40 microns) and fine 600 grit (nom. 25 microns). Ideal for fluted, shaped and small router bits, carbide or HSS, turning tools, chisels, plane blades, carving tools and all general tooling. Recommended for use with Trend lapping fluid to prevent clogging or rusting and assist in keeping tools clean.

The Trend CR/DWS/B6/FC is a 6 inch x 2.3/8 inch double sided diamond bench stone with monocrystalline diamonds for fast, clean, stock removal which offers excellent sharpening performance. It is double sided for coarse sharpening and fine honing. Coarse 360 grit (nom. 40 microns) and fine 600 grit (nom. 25 microns). The Coarse is ideal for carpentry as it rapidly fixes or restores a damaged edge or blunt tools, including chisels and plane irons. The Fine is ideal for cabinet making for a fine finish and refines the cutting edges of chisels, small knives, etc - achieves a razor edge in seconds. With plastic base and non slip feet with and protective lid. Oval holes design on fine side to collect and hold metal residue. Fine side also has clear solid area for small tools. Ideal for site and workshop. Use with plane irons and chisels. Suitable for all hand tools. Recommended for use with Trend lapping fluid to prevent clogging or rusting and assist in keeping tools clean.

The Trend CDJ300 Craft Dovetail Jig is accurate and easy-to-use for a variety of elegant dovetail joints. It cuts 12.7mm (1/2in) wide half blind dovetails or rebated dovetails in one operation.The CDJ300 is a precision made laser cut zinc plated steel template with a packing piece. Please note a unibase and fine height adjuster may be required for certain makes of router.Supplied with 1 x 1/4in shank TCT 104 Dovetail Cutter and 1 x 15.8mm Guide Bush. Specifications:Rating: Craftsman.Dovetail Size: 12.7mm.Workpiece Width Max: 300mm.Workpiece Thickness Min: 12mm.Workpiece Thickness Max: 25mm.Guide Bush Size: 15.8mm.Router Base Diameter Max: 180mm.

The Trend Corner Chisel is used to square up rounded corners on hinge and lock recesses. Fitted with a high-speed steel (HSS) anvil. Use with a Hammer. The chisel can be resharpened. Ideal for use with hinge and lock jigs.

The Trend CB Counterbore is extensively used for recessing bolt and screw heads and is supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. The TCT version is used for plywood, particle boards and plastics (abrasive).To be used at drilling speeds only, they are not suitable for ferrous and non-ferrous metals. When setting up, ensure the flutes of the drill are aligned with the flute of the counterbore. For replacement twist drills, use slow spiral type e.g., 501/532 to 501/012.D: 9.5mm.D2: 3.96mm.OL: 75mm.

Hard-wearing carry case for protecting and carrying the Trend COMBI1001, COMBI1002, KWJ700 and KWJ900.

Trend C220 x 1/4 TCT Intumescent Cutter to suit 4mm thick strip of 15mm width. Specification: Diameter: 24mmCutting Depth: 15mmBearing: 16mmShank: 1/4in

The Trend CraftPro Bearing Guided 3 Undercut Router Bit has a shank-mounted bearing guide for routing a leading edge on doors to allow a tight fit against the jamb. Specification: Cut Depth: 50mmOverall Length: 100mmShank: 1/2in

Trend C209 x 1/4 TCT Intumescent Recessor to suit 4mm thick strip of 10mm width. Specification: Diameter: 24mmCutting Depth: 10mmBearing: 16mmShank: 1/4in

The Trend C172 x 1/2 TCT Two Flute Cutter has the following specification: Cutting Diameter: 12mm (15/32in)Cutting Depth: 63mm (2.1/2in)Overall Length: 115mmShank Diameter: 1/2in

The Trend C168 x 1/4TC Guided Trimmer has two flute carbide TCT tips. Used for trimming plastic or plywood overlays. Its 6.3mm diameter allows it to follow more intricate curves. 25.4mm cutting depth for replication of thin components with templates. Fitted with a bottom bearing guide for following an edge to trim laminates and veneers for a professional finish. PTFE coating to minimise heat and resin build-up, for increased cutter performance and longevity. All Trend router cutters also have a safety K mark insertion indicator on each shank to ensure a quick and easy set up, whether for handheld or table work.

The Trend C153D x 1/2 TCT Two Flute Workshop Cutter is especially suited for drilling and has the following specification: Cutting Diameter: 12.7mm (1/2in)Cutting Depth: 50mm (2in)Overall Length: 93.5mmShank Diameter: 1/2in

The Trend C153/3 CraftPro Kitchen Worktop Cutter is suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. Ideal for kitchen fitting, 50mm cutting length for worktops up to 40mm thick. With a 'K' marked shank for correct insertion depth, providing safer routing. It has premium Tungsten Carbide cutting edges, ideal for use in solid timber and abrasive chipboard core worktops. With a bottom cut feature for plunge cut, slotting and morticing applications. The two flutes have highly ground tip faces, for a superior cutting performance and chip clearance. Its PTFE coated body reduces friction, heat and resin build-up for a longer lifespan. Specification: Diameter: 12.7mmCutting Depth: 50mmShank: 1/2in

The Trend C153 x 1/2 TCT Two Flute Workshop Cutter has the following specification: Cutting Diameter: 12.7mm (1/2in)Cutting Depth: 50mm (2in)Overall Length: 93.5mmShank Diameter: 1/2in

Shank = 1/4in

Shank = 1/2in

This Trend Craft Pro C145 1/4in shank Bearing Guided Slotting Cutter has a 31.8mm diameter with two flute carbide tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. The cutter is a fast, easy and accurate way to make slots and grooves in board edges, ideal for fitting panels.The slot dimension is matched to 6.3mm/1/4in thick sheet material with 9.5mm depth of cut. Bearings can be swapped to alter groove depth. It has PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. This Trend Craft Pro has a 1/4in shank for easy control in smaller routers with 'K' mark shank to ensure safe working practices.D: 31.8 mm.C: 1/4 inch.C: 6.3 mm.B: 12.7 mm.E: 9.5 mm.OL: 65 mm. Specification: Shank Diameter: 1/4 in.

This Trend C140 x 1/4 TCT Bearing Guided Corner Bead has the following specification: Cutting Diameter: 22.3mm (7/8in)Cutting Depth: 14mm (35/64in)Bearing: 12.7mmRadius: 3.2mmOverall Length: 65.5mmShank Diameter: 1/4in

This Trend C130 x 1/4 TCT Bearing Guided Corner Bead has the following specification: Cutting Diameter: 26mm (1.1/32in)Cutting Depth: 16mm (5/8in)Bearing: 15.9mmRadius: 4.8mmOverall Length: 70.5mmShank Diameter: 1/4in

This Trend Bearing Guided Template Profile Cutter has the following specification: (D) Diameter: 12.7mm(C) Cutting Length: 9.5mmShank: 1/4in

This Trend Bearing Guided Template Profile Cutter has the following specification: (D) Diameter: 12.7mm(C) Cutting Length: 25.4mmShank: 1/4in

This Trend TCT 90 Bearing Guided Trimmer Cutter has the following specifcation: Cut Diameter: 12.7mmCutting Depth: 25.4mmShank: 1/4in

This Trend TCT 90 Bearing Guided Trimmer Cutter has the following specifcation: Cut Diameter: 12.7mmCutting Depth: 25.4mmShank: 1/2in

This Trend TCT 90 Bearing Guided Trimmer Cutter has the following specifcation: Cut Diameter: 9.5mmCutting Depth: 12.7mmShank: 1/4in

The Trend C078 x 1/4 TC Round Over Two Flute Cutter will cut full bullnose profile for detailing work on 19mm stock. Specification: Cutting Diameter: 31.7mmCutting Depth: 15.9mm (5/8in)Bearing; 1: 9.5mm, 2: 12.7mmRadius: 9.5mmOverall Length: 67.5mmShank Diameter: 1/4in

This Trend C076 x 1/4 TCT Bearing Guided Ovolo Round Over has the following specification: Cutting Diameter: 25.4mm (1in)Cutting Depth: 12.7mm (1/2in) Bearing; 1: 9.5mm, 2: 12.7mmRadius: 6.3mm (1/4in)Overall Length: 64mmShank Diameter: 1/4in

The Trend C074 x 1/4 TC Round Over Two Flute Cutter with a 1/8in imperial radius for matched replication. Specification: Cutting Diameter: 19.0mmCutting Depth: 9.5mm (3/8in)Bearing; 1: 9.5mm, 2: 12.7mmRadius: 3.2mm (1/8in)Overall Length: 61mmShank Diameter: 1/4in

Trend TCT Radius Cove Cutter with two flutes and carbide TCT tips for a cleaner cut and fast clearance of waste in all timber and timber-based materials. Its PTFE coating minimises heat and resin build-up for increased cutter performance and longevity. Fitted with a 1/2in shank, 'K' marked to ensure safe working practices. Ideal for classic decorative mouldings and edge details. Specification: Radius: 9.5mmCutting Depth: 12.7mmShank: 1/2in

The Trend CraftPro Bearing Guided Chamfer Cutter for edging and chamfer cutting, on man-made fibreboards, natural timbers and plastics. It has two carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials. Follows straight and curved profiles for crisp, professional detailing work on an edge. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity. 1/4in shank for easy control in smaller routers, 'K' marked to ensure safe working practices. Specification: Cutting Diameter: 32mmCutting Depth: 12.7mm (1/2in)Angle: 45Bearing: 9.5mmOverall Length: 62mmShank Diameter: 1/4in

The Trend CraftPro Chamfer V-Groove Cutter has two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials. Its 45 'V' groove profile is ideal for false panel work and match board grooving details. A PTFE coating minimises heat and resin build up for increased cutter performance and longevity. Fitted with a 1/4in 'K'mark shank to ensure safe working practises. Can be used for mitred corner details on thin stock up to 9mm. Additional 90 profile allows quirked shoulder feature for extra diversity. Specification: Diameter: 12.7mmCutting length: 6.0mmAngle: 45Shank: 1/4in

The Trend C041A x 1/4 TCT Dovetail has the following specification: Cutter Angle: 104Cutting Diameter: 12.7mm (1/2in)Cutting Depth: 12.7mm (1/2in)Overall Length: 60.5mmShank Diameter: 1/4in

This Trend Craft Pro 1/4in shank Bearing Guided Rebater, router cutter, has a 35mm diameter and two flute carbide tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials.It has a bottom bearing guide for cutting rebates on curved and straight work with accuracy and ease.This cutter is supplied with two bearings for 11.1 and 12.7mm wide rebates for glazing and panel work. It has PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. The 1/4in shank gives easy control in smaller routers with 'K' mark shank to ensure safe working practices.Specifications: Diameter: 35.0mm.Cutting Length: 12.7mm.Rebate: 11.1mm.Bearing: 12.7mm.Shank: 1/4in.

The Trend C030 x 1/4 TCT Two Flute Cutter has the following specification: Cutting Diameter: 19.1mm (3/4in)Cutting Depth: 25.4mm (1in)Overall Length: 66mmShank Diameter: 1/4in

The Trend C024 x 1/4 TCT Two Flute Cutter has the following specification: Cutting Diameter: 15mm (19/32in)Cutting Depth: 25mm (63/64in)Overall Length: 65.5mmShank Diameter: 1/4in

The Trend C022 x 1/4 TCT Two Flute Cutter has the following specification: Cutting Diameter: 12.7mm (1/2in)Cutting Depth: 31.8mm (1.1/4in)Overall Length: 72.5mmShank Diameter: 1/4in

The Trend C019A x 1/4 TCT Two Flute Cutter has the following specification: Cutting Diameter: 12mm (15/32in)Cutting Depth: 19mm (3/4in)Overall Length: 71mmShank Diameter: 1/4in

The Trend C019 x 1/4 TCT Two Flute Cutter has the following specification: Cutting Diameter: 12mm (15/32in)Cutting Depth: 19.1mm (3/4in)Overall Length: 60mmShank Diameter: 1/4in

The Trend C016 x 1/4 TCT Two Flute Cutter has the following specification: Cutting Diameter: 10mm (25/64in)Cutting Depth: 19.1mm (3/4in)Overall Length: 59.5mmShank Diameter: 1/4in

The Trend C015 x 1/4 TCT Two Flute Cutter has the following specification: Cutting Diameter: 9.5mm (3/8in)Cutting Depth: 31.8mm (1.1/4in) Overall Length: 72.5mmShank Diameter: 1/4in

The Trend C014 x 1/4 TCT Two Flute Cutter has the following specification: Cutting Diameter: 9.5mm (3/8in)Cutting Depth: 25.4mm (1in)Overall Length: 66mmShank Diameter: 1/4in

The Trend C013 x 1/4 TCT Two Flute Cutter has the following specification: Cutting Diameter: 9.5mm (3/8in)Cutting Depth: 19.1mm (3/4in)Shank Diameter: 1/4in