Features:
• Phosphated square drive
• 72-tooth mechanism
• Take-up angle: 5°
• One-handed reversal
• Minimum head size
• Pressing on head with one’s hand does not cause reversal and always allows free lever return
• Bi-material ergonomic handle, with convenient hanging hole
• Excellent mechanical characteristics

Features:
• Phosphated square drive
• 72-tooth mechanism
• Take-up angle: 5°
• One-handed reversal
• Minimum head size
• Bi-material ergonomic handle, with convenient hanging hole
• Excellent mechanical characteristics

Features:
• Phosphated square drive
• 48-tooth mechanism
• Take-up angle: 7.5°
• One-handed reversal
• Pressing on head with one’s hand does not cause reversal and always allows free lever return
• Bi-material ergonomic handle, with convenient hanging hole
• Excellent mechanical characteristics

Features:
● Ultra-strength instant adhesion
● High mechanical resistance, final force and elastic module
● Free from isocyanates, phthalates, solvents and silicone
● Permanently elastic, does not shrink, bubble-free, odourless
● Resistant to humidity and weathering
● Adheres primer-free to most substrates, including wet ones


DIRECTION FOR USE
Apply the adhesive in vertical strips 10-20 cm apart. Bring the materials into position and press hard, so that the adhesive can be at least 2-3 mm thick. Do not apply the adhesive in dots.
Application temperature: +5 °C ÷ +40 °C (for both substrates and the environment). Extrude by means of a bonding gun and the ‘V’ nozzle supplied with the adhesive. The substrates must be solid and free from grease and dust. Test before application.

The adjustable wrench with scale, 111E, allows differently sized nuts and bolts to be tightened and loosened through the sliding jaw, which can be adjusted through the central roll.

Features:
• Right-hand rotation
• Wide wrench opening
• Compact head with completely open jaw
• Double laser marking in mm/inch for accurate adjustments
• Matt chrome-plated heads for improved scale readout
• Matt chrome-plated body
• Made from high-performance alloy steel, for increased mechanical torsional strength
• Special heat treatment for excellent wear resistance
• Large handle for optimized comfort during use
• Hole on handle for hanging wrench
• Complies with DIN 3117 - ISO 6787

Offset key wrenches with screw holding system.

Complete with wallet-opening support for quickly identifying required size and preventing wrenches from coming out accidentally.

Set of 7 machine taps M3÷M12, made from HSS with 5% cobalt, for through holes. The addition of cobalt increases heat resistance and duration, thus making these taps ideal for particularly hard materials and high-speed work.

• Ø 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 mm

Main features:
• Worktop (2,100x750 mm) made from multi-ply wood, 38 mm thick
• 4 drawers (367x588 mm) with ball bearing slides:
2 drawers 70 mm high
2 drawers 140 mm high.
• Drawer bases protected by foamed rubber mats
• Each drawer can accommodate up to 4 EVA foam or ABS thermoformed trays
• Front centralized lock
• 1 module with door and lock
• Steel frame with 2 supporting legs
• Holes for a vice (1599F/150 - 1599GI/150, to be ordered separately)
• 2 lower half-shelves for objects, 1,788x335 mm; thickness: 40 mm
• Static load capacity: 800 kg, evenly distributed
• Can be fixed to floor

Kit with 4 perforated tool panels, comprising the following:
• 3 supporting brackets
• 6 400-mm uprights
• 2 1,015-mm supports; can accommodate 1 19" rack multi-socket (not included)
• 4 perforated tool panels, 1,015x25x400 mm


 161 kg
2.100x750x904 mm

Main features:
• 1 fully removable drawer (1,176x367 mm), with ball bearing slides
• 7 fully removable drawers (882x367 mm), with ball bearing slides:
6 drawers 70 mm high
1 drawer 140 mm high

• Worktop made from stainless steel coated MDF, with holes for vice item 1599F/125 or 1599GI/125 (to be ordered separately) and 6 tote trays
• Sturdy nylon fronts, with built-in label holders
• Drawer bases protected by foamed rubber mats
• Removable side compartment, with ball bearing slides, with shelf and lock
• 4 castors, Ø 150 mm: 2 fixed and 2 steering with brakes
• 3 safety locks
• Built-in paper roll holder
• Built-in bottle holder
• Static load capacity: 1,100 kg

Following trays can be added:
up to 8 EVA foam or ABS thermoformed trays in drawer 1,176x367 mm
up to 6 EVA foam or ABS thermoformed trays in drawer 882x367 mm


Following accessories can be added:
• Perforated tool panel with supports 2400 RSC24AXXL/PF
• Computer wall bracket 2400 RSC24/SPC
• Side tool tray 2400 RSC24AXLP/VL
• Waste bin 2400 RSC24AXLP/CPR
• Folding side shelf 2400 RSC24/MP
 131 kg

The bag includes 2 ratchet-downs with single hooks, high-tenacity polyester belt (PES), 50 mm, 8.5 m long.

Features:
• Professional model, complies with EN13157 standard, made from first-rate materials
• Designed to lift heavy loads quickly and safely
• Can be connected to a fixed point or mobile devices
• Automatic brake with double pawl system
• Self-locking hook
• Safety factor: 4
• WLL: working load limit


Technical data:
• Safety factor: 4
• Serial identification tag

Available certificates:
• Manufacturer's Certificate
• CE Declaration of Conformity
• Test Report UNI EN10204 type 2.2
• Technical Product Specifications

Features:
• V-profiled base
• Precision: 0.5 mm/m
• Complete with vertical reading window

Kit contents:
• 24 TPI metal blade
• 6 TPI plasterboard blade
• double 11 TPI plastic and 16 TPI wood blade

Contents:
• 5 angled rubber tips
• spare scraper blade

Features:
• Dual light emission: main and spot
• 3 light intensities:
main COB LED 350 - 175 lumens
spot: SMD LED 120 lumens
• Rechargeable battery: Li-Ion3.7 V, 1600 mAh
• Charging time: 2.5h
• Battery life:
main: 6/3h
spot: 6h
• Magnetic base
• Belt clip/magnetic pocket
• IP65
• IK07
• USB-C cable included

The smallest torque wrench of Beta's range: compact and easy to use, it provides an ideal combination of convenience and simplicity within reach.
Based on its compactness and capacity (3-15 Nm), this torque wrench is ideal for low-torque use (e.g. in the cycling industry).
Lightweight, compact and pocket-sized: the ideal tool for everyday use.

Features:
• Accuracy: ± 4%, right-hand
• Reversible ratchet, 72 teeth
• Right-hand tightening
• 1/4'' square drive
• Unit of measurement: Nm
• Compact: no more than 17.5 cm

The 599DGT-AW digital torque wrench is ideal for precision work in industry and mechanics, where it is essential to track tightening values.

Features:
• Tightening types: torque, angle, torque + angle
• Dual measurement mode: peak hold and track
• Light indicators, an intermittent sound and tactile feedback inform user that preset torque or angle has been reached
• Last 999 peak torque and/or angle readings can be stored and displayed
• 9 “Preset” modes can be saved and preset
• Bi-directional wireless data transmission, from wrench to software and vice versa, in mass or in real time
• Key safety lockout
• Wrench can be associated with a certain user via software
• Tightening data traceability. Software allows date and time, tool serial number, set tightening value and reached value to be stored and associated with user ID
• Customized data processing software with immediate, easy-to-read OK/NG result and real time display of charts
• Nonslip bi-material handle
• Wrench + software in 9 languages
• Included: 3 AA - 1.5V batteries, wireless USB key and software USB key

Beta's assortment 1477/C38, your partner for accurate tightening jobs on belt tighteners and engine parts. The 500-mm long ratchet lever, with central joint, allows the ideal angle to be determined, thereby making jobs easier. The short sockets, available with several different heads, fit small spaces perfectly. Hence no additional parts must be removed.

Kit contents:
• Swivel lever with 500-mm long reversible ratchet
• Short sockets for Torx® head screws: E10-E12-E14-E16-E18
• Short hexagon sockets: 8-9-10-11-12-13-14-15-16-17-18-19-24
• Bits for Torx® head screws: T20-T25-T27-T30-T40-T45-T50-T55-T60
• Bits for cross head Phillips® screws: PH2
• Hexagon bits: 4-5-6-7-8-10 mm
• Magnetic bit holder
• 3/8" extension, 75 mm


 2 Kg
 630x130x55 mm -  2 kg

The 12 and 24V battery tester allows you to test battery, alternator, starter and system. Thanks to the integrated printer you can get immediate reports, while the PC connection allows you to download data and update the software.

Other features:
• Reverse polarity protector
• Backlit display
• Compact, shockproof frame
• 9 language software


Technical data:
• Applications: 12V and 24V batteries
• Operating range: 100-2000 CCA
• Reference standards: CCA,SAE,DIN,EN,IEC,JIS, MCA, GB, BCI, CA
• Supported batteries: PB, WET, GEL, AGM, AGM FLAT, EFB, SLI
• Voltmeter: 9V-30V
• Cable length: 1800 mm
• Supported languages: Italian, English, French, German, Spanish, Polish, Dutch, Hungarian, Portuguese
• Included accessories: USB cable, 3 printer paper rolls
 833 g

Based on the probe that can be rotated 360° and the double lit camera reaching the most inaccessible points has never been so easy and defects and problems can be found easily and accurately.

Features:
• TFT LCD 5" screen
• Supports SD cards
• Video and image recording
• 4 LEDs
• Power supply via USB port (built-in battery)
• Rotating probe
• High resolution (1920x1080) for bright images and video


Technical specifications:
• Maximum resolution: 1920X1080
• Probe length: 1500 mm
• Camera diameter: 6 mm
• Video formats: AVI
• Photo formats: JPEG
• Shooting angle: 0÷180°
• Probe adjustment: 0÷360°
• Probe detection degree: IP67
• Data output: USB-C cable and SD card
• Power supply: 3.7V 2000 mAh battery
 600 g

This kit of impact sockets with XZN® M12 profile, available in two different lengths, has been specially designed to make it easier to remove the three screws from the axle shaft - gearbox side - in VAG Group vehicles. This allows the axle shaft to be pulled out, without requiring the accessory parts to be removed.


Sizes included in kit:
• XZN® male impact socket M12 L 77 mm
• XZN® male impact socket M12 L 120 mm

The tool for manually pushing back brake pistons, fitted with two swivel plates and a ratchet movement mechanism, means an effective, flexible solution for quick jobs - e.g. on commercial vehicles.


 819 g

The unique shape of the multi-head jaws of these pliers make it possible to use the tool on a wide range of commercially available collars. A self-locking rack and a cord extension make it easier to work with one hand - e.g. in narrow or hardly accessible spaces.

Combination collar and hose clamp pliers
The peculiar shape of the multi-head jaws of these pliers makes it easier to work on a wide range of commercially available collars. Furthermore, a self-locking rack allows the single-handed use of the tool - e.g. in small spaces.

Emergency case, complete with tools and instruments for the safe maintenance of hybrid and electric vehicles.

PPE, SIGNS AND VOLTAGE TESTER INCLUDED
As well as hand tools, working on hybrid and electric vehicles also requires special attention for safety. Therefore, the tool case, 2029 e-mobility, includes insulated gloves, hazard warning signs and a combination voltage and continuity tester.

• 1/2" drive
• Maximum delivery rate: 30 l/min
• Maximum operating pressure: 100 bar
• Lockable delivery lever

• 1/2" drive
• Shockproof rubber coating
• Batteries: 2 x AAA
• Max. delivery rate: 0÷30 l/min
• Max. pressure: 100 bar (1450 psi)
• Viscosity: 8÷2000 mPas
• Tolerance: ±0.5%

Compatible with petrol
Particularly suitable for pouring fuel
and emptying tanks
Syringe capacity: 200 ml

• Tank capacity: 40 l
• Large oil pan made of PP
• Level indicator
• Pneumatic drum emptying

The manual pallet jack with short forks has been specially designed for easier loading and unloading operations in small spaces.

Features:
• 2 steering wheels, 200x50 mm, made of PU
• double front rollers, 80x70 mm, made of PU
• pallet access entry and exit rollers
• depth stop notch
• lowering speed control valve
• safety overload valve


Technical data:
• maximum capacity: 2500 kg
• overall length: 1200 mm
• fork length: 800 mm
• fork width: 540 mm
• individual fork width: 160 mm
• lever height: 1230 mm
• max. lifting height: 115 mm
 61 kg

Features:
• Easy to carry with a fork lift truck or a pallet jack
• Support cannot be placed under any part
• Completely hot painted with epoxy powder, for high resistance to chemicals

 350x255x74 mm  1253 g

This wrench has been specially designed to make it easier to remove and install oil filters of PSA Group and Ford vehicles. Fitted with a swivel (45°) ratchet head, it allows easy access to narrow spaces, without requiring any further parts to be removed.

Required when nut caps
are damaged by impact wrenches

019380055 1938R/S5 1938 R/S5-sets 5 blades for 1938
Blades for windscreen removers
1938R/L1 Short straight blade for windscreen removal from inside vehicle
1938R/L2 Long straight blade for windscreen removal from inside vehicle
1938R/L3 Curved flat blade for hard-to-reach areas
1938R/L4 Scraping blade
1938R/L5 Blade with hook for windscreen removal from outside vehicle

​Coloured bits for immediate head recognition.

Each head has a different colour for quick identification.
Small, compact ratchet for jobs in small areas; recommended for general maintenance: automation, assembly lines.

Main feautures:
∙ 5 degree take-up angle
∙ Knurled head for quick mechanism handling
∙ Sealing magnet
∙ Can be used with bits and sockets

61 bits and 1 quick-release magnetic bit holder (items 861LP, 861PE, 861PH, 861PZ, 861TX, 861RTX, 861TRW, 861TQS, 861SP, 851SR)

New bit holder with articulated T handle

 420x185x60 mm –  3 kg

335x145x60 mm –  1,7 kg

52 hexagon bits, 10 mm, and 2 accessories
(items 867PE, 867PE/L, 867XZN, 867XZN/L, 867TX, 867TX/L, 867RTX, 867RTX/L, 867/1, 867/1)

Automatic blade loading Automatic blade loading

• Nonslip bi-material handle
• Automatic blade loading
• Blade locking nut for maximum blade stability under stress conditions
• Nonreturn safety slider
• Automatic blade loading

Features:
• Automatic blade change
• Screw blade locking system

• Interior blade storage
• Belt clip
• Sturdy aluminium frame

Features:
● With clip and fabric wallet with loop
● Anodized aluminium handle
● Safety blade lock

320x250x50 mm

260x160x55 mm –  1,0 kg

Features:
• Suitable for motorcycles
• Maximum capacity: 4 l
• Reduced splashing

Fitted with:
• high-resistance three-layer diaphragm and internal telescopic guide
• end-of-stroke stop and overloading safety valve
• can also be used on auto lifts

TECHNICAL DATA
capacity: 2 t
weight: 14 kg
power supply pressure: 8-10 bar
height: min.132 – max. 326 mm

Long version, suitable for use on lorries, articulated vehicles, buses and coaches, and agricultural machines
• automatic piston return
• two descent valves with under load speed control

TECHNICAL DATA
capacity: 70-43-23-13 tons
weight: 74 kg
power supply pressure: 8-10 bar
air consumption: 600 l/min

Quick, functional

Ideal for removing:
• hail dents
• dents caused by doors
• small dents in general
ideal for removing:
• hail dents
• dents caused by doors
• small dents in general

– 2 TORX T40-T45 bits
– 1 XZN 10 bit
– 1 hexagon bit, 8 mm
– 3 bi-hex bits, 10-12-13 mm

Convenient hanging wallet
for viewing all tools

Just two tools for many uses
High stress resistance

Product Name
Art.
Quantity per Wishlist
Product Name
Art.
Quantity per Wishlist
012031001 1203E/D5
Set of 5 Evox screwdrivers items 1201E, 1202E
1
012031003 1203E/D5PZ
Set of 5 Evox screwdrivers items 1201E, 1209E/PZ
1
012031006 1203E/D6
Set of 6 Evox screwdrivers items 1202E, 1204E
1
012031007 1203E/D7
Set of 7 Evox screwdrivers items 1201E, 1202E
1
012031008 1203E/D8
Set of 8 Evox screwdrivers items 1201E, 1202E
1
012031018 1203E/D8P
Set of 8 Evox screwdrivers
1
012031010 1203E/D10
Set of 10 Evox screwdrivers items 1201E, 1202E
1
012031019 1203E/D10N
Set of 10 Evox screwdrivers items 1201E, 1202E

Blades for windscreen removers
1938R/L1 Short straight blade for windscreen removal from inside vehicle
1938R/L2 Long straight blade for windscreen removal from inside vehicle
1938R/L3 Curved flat blade for hard-to-reach areas
1938R/L4 Scraping blade
1938R/L5 Blade with hook for windscreen removal from outside vehicle

1752
Plastic pressure cans, rigid spouts
For use with oil with density ranging from ISO22 to ISO68

123E1/4
Bit holder adaptor, 1/4", for 10 mm ratcheting wrenches
• Used in combination with 10-mm ratcheting wrench, it allows quick use of bit.

1567
Lever for removing wishbone heads and shock absorbers from pillar
One operator can position lever effortlessly
and proceed with disassembly.

It is enough to apply a force of 20 Nm.

1473P
Clamp pliers for OETIKER® low-profile collars

T145
Hard thermoformed tray with tool assortment

 640 g

 1032 circlip pliers straight, internal  180 mm
 1034 circlip pliers bent, internal  170 mm
 1036 circlip pliers straight, external  175 mm
 1038 circlip pliers bent, external  175 mm

Product Name Art.
024240145 T145
hard thermoformed tray with tool assortment
1
024000448 TV145
thermoformed tray T145, empty
1

Product Name Art.
014300105 1430/S5
set of 5 tapered extractors for broken screws and studs, made from hardened steel (item 1430/..), in case
1430/1-1430/2-1430/3
1430/4-1430/5

Double ended hexagon / bi-hex socket wrenches, chrome-plated
• Can be used with sliding handle in through hole.
• Hole on short side allows access to nut, e.g. with projecting threads.

Ideal for cars and commercial vehicles

allows quicker replacement jobs on:
- timing belt
- water pump
- alternator

ADVANTAGES
- it takes operator just a few seconds to apply cross member and fix it under vehicle
- includes 2 pairs of stabilizer pins, to work on cars, vans and commercial vehicles
- loading belt allowing cross member to be held steady, even when chassis does not have any holes

TECHNICAL DATA
max. capacity: 250 kg
length: 1050 mm
height: 120 mm
max. jack height: 260 mm
weight: 12 kg

Product Name Art.
000960946 96T/S5P
Set of 5 offset hexagon key wrenches with handles
2,5-3-4-5-6

Lever operated grease guns
Can be used with cartridges 1750CG or loose grease


Product Name Art. 1750CG
cc cc ​L
mm
017500500 1750 500 400 500 380

Magnetic bit holder, insulated, with bimaterial handle
Product Name Art. L
mm L1
mm D
mm 
g
008500910 850MQ 233 125 12.5 85

DC-powered inverter welding machine for MMA welding
The merger of BETA S.p.A. and the Italian-based welding industry leader, HELVI S.p.A., has translated into the DC inverter welding machine, BETA 1860BH, ideal for MMA welding with rutilic, basic and stainless steel electrodes.
Compact and lightweight, complete with arc force, hot start, anti-sticking and thermostatic protection features, it is the perfect choice for semi-professional maintenance jobs.

Supplied with 16 mm2 cables and hammer brush.
Power Generator Friendly.


Features

• Adjustment current:10÷120A
• Power supply: 1x230V
• Use factor (40 °C) :
25% - 120 A
50% - 80 A
100% - 60 A
• Protection: IP22S
• Usable electrodes: Ø 1.6 - 3.2mm rutilic, basic, stainless steel, cast iron etc.
• Supplied with 16mm² cables

Measuring tapes with fixed magnets
Features:
• Shock-resistant ABS casings
• Steel tapes
• Precision class: II

Break-back torque wrenches

Product Name Art. ​Nm ​Kgfm ​lbf.ft ​D
mm ​A
mm ​L
mm ​
kg ​
006770607 677/C600 120÷600 12÷60 100÷450 69 55 1059 6,0 10

006770612 677/C800 200÷800 20÷80 150÷600 69 55 1319 6,7 10

006770616 677/C1000 300÷1000 30÷100 200÷750 69 55 1554 7,4 20

006770621 677/C1500 700÷1500 70÷150 500÷1000 69 55 1869 9,6 25

Evox-E electric screwdriver
Technical data:
• 3.7V 2300mAh lithium battery
• Maximum torque in electric mode: 1.2 Nm
• Over 1,000 screw fastenings at 1.2 Nm per charging cycle
• Speed: 250 rpm
• Outstanding static resistance (up to 12 Nm, manual tightening)
• Outstanding mechanical resistance
• 1/4" magnetic bit holder
• Compatible with all standardized bits
• Rechargeable via USB-C cable (included)
• USB-C port protected with screw cap
• Front ring LEDs for improved visibility of working area
• When charging, steady LEDs indicate that charging is complete
• Ergonomic nylon handle inspired by Evox screwdriver
• Built-in and sealed operation buttons
• Convenient belt pouch with bit pockets (6 50mm-long mixed bits included)

Self-locking wrench with automatic take-up device for hexagons, 8 to 32 mm
Effective on worn screws
Quick, multipurpose
Ideal for hexagon, Spline, square and Torx® head screws, including damaged screws.

Folding tool trolley for outdoor jobs
Can be transported on a vehicle.
Folding tool trolley. Its unique patented design guarantees an effortless transport.

Features:
• 2 drawers, 588x277 mm, with ball bearing slides, for two-way opening
• Large lower object compartment, 588x277x220 mm
• Sheet metal frame
• 2 fixed castors, Ø 160 mm, and 2 steering castors with brake, Ø 100 mm
• Thermoplastic worktop with 6 built-in tool trays
• Centralized lock
• Can accommodate drawer partitions and MC foam tool trays

 20 kg
 990x390x700 mm

Folding workbench, Light version
Even lighter; only 18.5 kg.
Compact.
Features:
• Lightweight, easy to carry
• Hard-Wearing: static load capacity 200 kg
• Reliable: worktop (800x500mm) made of galvanized sheet iron, for use on one side, protected by an anti-oil and anti-petrol rubber cover
• Handle with rubber cover, for easy transportation
• An additional sturdy, reliable worktop, always within reach

Tool case with assortment of 163 GENERAL MAINTENANCE TOOLS
• Removable interior tool panel
• Integrated soft foam tray

 465x330x170 mm

Components
BW 42 Combination wrenches 8-9-10-11-12-13-14-15-16-17-18-19 mm 12
BW 96BPC/SC9 Set of 9 ball head offset hexagon key wrenches  1,5-2-2,5-3-4-5-6-8-10 mm 9
BW 111 Adjustable wrenches 250 mm 1
BW 1048 Slip joint pliers, boxed joints 250 mm 1
BW 1128BMX Electrician's scissors,
stainless steel blades,
with microteeth 150 mm 1
BW 1082BM Diagonal cutting nippers  160 mm 1
BW 1150BM Heavy-duty combination pliers  180 mm 1
BW 1166BM Extra-long needle knurled nose pliers  160 mm 1
1201E Screwdrivers for slotted head screws  2,5x50 - 3x75 - 4x125 - 5,5x150 - 6,5x150 - 8x150 mm 6
1202E Screwdrivers for cross head Phillips® screws  PH1x80 - PH2x100 mm 2
BW 1253 Mains testing screwdriver  3,5x100 mm 1
1209E/PZ  PZ1x80 - PZ2x100 mm 2
BW 1256/C21-1 22
BW 1370 300 Engineer's hammers 300 g 1
BW 1692/5 Measuring tapes 5 m 1
BW 1725CR Mini hacksaw frame 150 mm 1
1771 18 mm 1
BW 861/C61 Set of 60 bits
with magnetic bit holder,
in pocket-size case      61
BW 895/1 Socket holders
for items BW 861, BW 862, BW 866 1
BW 900 Hexagon hand sockets, 1/4"  4-4,5-5-5,5-6-7-8-9-10-11-12-13-14 mm 13
BW 900/20 50 mm 1
BW 900/20L 100 mm 1
BW 900/25 Universal joint - 1/4" 1
BW 900/30 1/4" drive spinner handle 1
BW 900/42 1/4” drive sliding T-handle 110 mm 1
BW 900/55 Reversible ratchet, 1/4"  1
BW 920A Hexagon hand sockets, 1/2"  10-11-12-13-14-15-16-17-18-19-21-22-24 mm 13
BW 920/21 Extension bar - 1/2" 125 mm 1
BW 920/25 Universal joint, 1/2" 1
BW 910/16F Adaptor - F3/8"xM1/2" 1
BW 920/22 Extension bar - 1/2" 250 mm 1
BW 920/55 Reversible ratchet  1

Parallel bench vices, forged
Fully steel cast. Milled and hardened jaw surface.
Front opening. High clamping depth.

Folding tool trolley
Main features:
• Loading platform made of reinforced polypropylene (PP), with non-slip coating and TPV inserts for corner protection
• Retractable handle for quick, compact storage
• Four non-marking castors, Ø 125 mm: 2 fixed and 2 steering with brakes
• Maximum capacity: 300 kg.
• Loading platform working width: 705 mm
• Loading platform depth: 480 mm
• Loading platform height: 200 mm

COMBO folding tool trolley
Main features:
• Ultracompact folding tool trolley
• Telescopic handle
• Dimensions when open: 485x520x1095 mm
• Dimensions when closed: 485x80x810 mm
• Dimensions of folding base: 485x350 mm
• Two puncture proof wheels, Ø 175

Burnished Finish
Supplied in Plastic Clip
Set Contains 1.5, 2, 2.5, 3, 4, 5, 6, 8 & 10mm:

Contains:
1/4″ Drive hexagon sockets (900): 4, 4.5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14mm.
150mm extension bar (900/21).
Flexible universal joint (900/25).
Spinner handle (900BG/30).
Sliding T-handle (900/42).
1/4″ Drive ratchet (900/55).
Supplied in sturdy plastic case (Dimensions: 270 x 120 x 45mm).
Weight: 1kg.

000421074 42/B9N
Set of 9 combination wrenches (item 42)
in roll-up wallet made of durable polyester
6-7-8-10-11-13-14-17-19 mm

Length: 150mm.
3mm diammeter.
L1: 23mm.

Adjustable cutting depth: 5-25 mm.
Features:
• Blade retracts through an automatic spring mechanism
• Die-cast alloy body
• Staple remover built into handle

Precision 1 mm/m
Adjustable horizontal vial

Professional model.

Double mm-scale
Photo-engraved
Double mm-scale
Photo-engraved

Screw adjustment of stripping depth
V-shaped cutters