HexArmor® Hercules® 400R6E 360° cut- and puncture-resistant glove
The Hercules® 400R6E glove by HexArmor® is engineered to provide the highest levels of cut and puncture protection available on the market. The glove offers full coverage over the entire hand and most of the forearm for the most harsh applications.

General features

Includes SuperFabric®
Brand material to protect against hazards through a configuration of tiny guard plates layered onto performance fabrics – an exclusively licensed solution to HexArmor®
Pre-curved shape for all-day wear
Highest durability for long-lasting protection
Launderable
Safety features

Certified 4X34F according to EN 388:2016
High cut resistance available provided by two layers of SuperFabric® *brand material on palm (interior layer) and back-of-hand and two layers on the finger sidewalls
Industrial puncture protection from wires, metal, wood, and glass
Specialized silicone gripping surface on palm for enhanced durability and grip
Comfort features

Full coverage design and pre-curved shape for maximum comfort and ultimate protection

HexArmor® Helix® 3071: Fully coated knit glove offering 360° fluid resistance
The Helix® 3071 features a 13-gauge HPPE/steel mixed fabric shell that gives wearers 360° level A6 cut resistance and contact heat protection level 1. The wrinkle rubber palm coating on the palm provides superior grip and tactility while the fully coated natural foam latex offers 360° fluid resistance that extends to the knit wrist to keep out fluids and dirt.

General features

13-gauge HPPE/steel blend shell
Dense natural latex coating provides 360° water resistance
Roughened coating on the palm provides excellent grip and abrasion resistance
Ultimate dexterity and tactility
Maximum level of cut protection (cut level F)
Safety features

Certified according to EN 388 (4 X 4 3 F)
EN407 rated level 1 for contact heat
Excellent grip in wet areas thanks to the roughened coating on the palm
Launderable for extended life
Coated knit wrist helps prevent fluid and debris from entering the glove
Comfort features

Seamless construction for enhanced comfort and breathability
Fully coated, providing all-round protection against liquids
Application areas

Assembly
Service work
Sheet metal processing
Mechanical engineering and tool construction

HexArmor® Helix® 3023: Fully coated knit glove offering 360° fluid resistance
The Helix® 3023 features a 15-gauge HPPE, steel, fibreglass, and polyester blend shell with cut and abrasion resistance, all while offering breathable, lightweight wear. The PrimeFoam nitrile three-quarter palm coating delivers superior grip and abrasion resistance in dry or oily applications, complete with a reinforced thumb saddle for added durability.

General features

15-gauge HPPE, steel, fibreglass, polyester blend shell
PrimeFoam nitrile three-quarter palm and finger coating for increased grip and extreme abrasion resistance, level 6 abrasion resistance
Ultimate dexterity and tactility
Enhanced Touchscreen capabilities
Excellent grip in dry and oily conditions
Very high level of cut protection (cut level D)
Safety features

Certified according to EN 388 (4 X 4 3 D)
Extended protection on the fingers and back-of-hand
Reinforced thumb saddle
Launderable for extended life
Elastic knit wrist helps prevent dirt and debris from entering the glove
Comfort features

Seamless construction for enhanced comfort and breathability
Very high level of water resistance and flexibility
Application areas

Assembly
Service work
Sheet metal processing
Mechanical engineering and tool construction

uvex protector chemical NK2725B protection glove – for mechanical and chemical risks
The uvex protector family of safety gloves can easily overcome even the most complex challenges: the multi-layered structure of the material provides reliable cut protection and reliably guards the wearer against chemical and mechanical hazards.

General features

A very robust safety glove that uses multi-layer technology to combine impermeability with optimum cut protection
Length of gauntlet: approx. 27 cm
Colour: blue
Available in sizes: 9 to 10
AQL 1,5
Protection features

Certified in line EN 388:2016 (4 X 4 4 C) and EN ISO 374-1:2016/type A (J K N O P T)
Very high cut protection thanks to the multi-layered construction of the supporting material, which is made from cotton, HPPE and glass
Good resistance to grease, mineral oils and many chemicals
Good grip in damp, wet and oily areas
Comfort features

Good wearer comfort
Free from hazardous substances in accordance with OEKO-TEX® Standard 100
Areas of application

Work involving a high risk of cuts and contact with chemicals
Work involving high levels of mechanical strain
Sheet metal working
Machinery and tool construction

uvex profabutyl B-05R chemical protection glove made from 100% butyl rubber
Made from 100% butyl rubber, uvex profabutyl chemical protection gloves are mainly suitable for working with polar compounds such as esters or ketones.

General features

Chemical protection glove without stockinette made from butyl rubber
Seamlessly coated with bromobutyl (approx. 0.50 mm)
Colour: black
Available in sizes: 7 to 11
AQL 1,5
Protection features

Certified to EN 388:2016 (2 0 1 0 X), EN 16350:2014 and EN ISO 374-1:2016/Type A (A B I K L N O T)
Good grip in damp and wet areas
Good resistance to polar compounds such as esters, ketones, aldehydes, amines and saturated saline solutions, plus acids and alkalis
Comfort features

Good fit
Highly flexible
Applications

Safety glove without layer, suitable for working with chemicals in:

Chemical industry

uvex arc protect Arc Flash protection glove
When working with electrical equipment, hands are highly vulnerable to burns from short-circuit electric arcs. The uvex arc protect g1 protective glove offers reliable protection against the thermal discharge of such arcs. Made from flame-retardant modacrylic/cotton knit, these gloves safeguard the wearer from second-degree burns. For enhanced safety, they can be paired with the uvex power protect V1000 electrician's glove.

General features

High level of flexibility for comfort and an excellent tactile feel
Thermal protection
Certified in line with OEKO-TEX® Standard 100
Made in Germany
Protective glove made of modacrylic/cotton knit
Protective features

Short circuit electric arc class 1 according to EN 61482-1-2 (box test)
Thermal protection according to EN 407
Comfort features

Ergonomic fit
Excellent wearer comfort
Outstanding tactile feel
Excellent protection against thermal discharge

uvex power protect V1000 electrician's glove for electrical voltage up to 1000 V
When working with electrical equipment, the risk of electric shock is significant. The uvex power protect V1000 protective glove provides reliable protection against electrical voltages up to 1000 V. Made from highly insulating natural latex, these gloves shield the wearer from electrical discharges. Additionally, their flexible design ensures comfortable wear and excellent tactile sensitivity.

General features

The glove's high level of flexibility offers pleasant wearer comfort and an excellent tactile feel.
Protective features

EN 60903: 2003 IEC 60903: 2014 (Class 0/RC)
Comfort features

Anatomical fit
Flexible, with a good grip feel even at low temperatures
Flexible at cold temperatures
Mineral oil-resistant

uvex phynomic F XG cut protection glove (level F) with excellent grip and touchscreen function
Maximum level of cut protection in combination with the best grip in oily conditions in its class. The Xtra Grip coating ensures excellent grip in oily areas and a long service life of the glove. For increased sustainability and safety. uvex phynomic cut protection gloves come from our carbon-neutral production in Germany. They feel like a second skin, are sensitive and meet the highest requirements for protecting your health (proDERM®). Thanks to touchscreen compatibility with all common screens, tablets and mobile phones, there is no need to take off the uvex phynomic F XG.

General features

Lightweight and sensitive cut protection glove with the maximum cut protection level for mechanical activities in damp and oily areas
Aqua polymer Xtra Grip coating on the palm and fingertips
Touchscreen compatibility
The long service life of the glove reduces costs and waste
Excellent fit, feels like a second skin
Comfort features

Excellent tactile feel
High level of breathability due to the porous foam coating
Perfect fit due to slim-fit design and 3D-Ergo technology
Safety glove free of allergenic accelerators — dermatologically approved (proDERM®) health protection and skin compatibility
Suitable for allergy sufferers and a solvent-free alternative for PU gloves
Free from harmful substances in line with OEKO-TEX® Standard 100
Protection features

Certified according to EN 388 (4 X 4 3 F), EN 407 (X 1 X X X X)
Excellent grip in oily, slightly damp and dry areas
Outstanding mechanical abrasion resistance of the aqua polymer Xtra Grip coating
Very high level of cut protection and high tear resistance due to the optimal material composition
No need to remove the glove thanks to touchscreen compatibility
Protection against contact heat up to 100°C
Application areas

Cut protection (cut level F) for assembling and handling parts with very sharp edges
Metalworking and glass processing
Inspection
Food processing
Sorting
Packaging
Working on industrial screens, tablets and mobile phones
Maintenance and service work
Sustainability

Carbon footprint: 0.76 kg CO₂ eq
Carbon footprint of production: 0.15 kg CO₂ eq
Carbon footprint of materials: 0.57 kg CO₂ eq
Carbon footprint of transportation: 0.03 kg CO₂ eq
Carbon footprint of packaging: 0.01 kg CO₂ eq
CO₂ - time of calculation: 04/2024
Legal notice regarding carbon footprint: Calculation method: IPCC 2021 GWP 100a (based on ISO 14067) SimaPro 9.5.0.0 ecoinvent database 3.9. Scope: cradle-to-customer. These CO₂ values are valid at the time of calculation and may be subject to change.

uvex phynomic C XG ESD cut protective glove (cut level C) with ESD and touchscreen functions
The best grip in oily conditions in its class. The Xtra Grip coating ensures excellent grip in oily areas and a long service life of the glove. For increased sustainability and safety. In addition, the phynomic C XG ESD features ESD capability. uvex phynomic cut protection gloves come from our carbon-neutral production in Germany. They feel like a second skin, are sensitive and meet the highest requirements for protecting your health (proDERM®). Thanks to touchscreen compatibility with all common screens, tablets and mobile phones, there is no need to take off the uvex phynomic C XG ESD.

General features

Lightweight and sensitive glove with a high level of cut protection and ESD function for mechanical activities in damp and oily areas
Aqua polymer Xtra Grip coating on the palm and fingertips
Touchscreen compatibility
The long service life of the glove reduces costs and waste
Excellent fit, feels like a second skin
Comfort features

Excellent tactile feel
High level of breathability due to the porous foam coating
Perfect fit due to slim-fit design and 3D-Ergo technology
Safety glove free of allergenic accelerators — dermatologically approved (proDERM®) health protection and skin compatibility
Suitable for allergy sufferers and a solvent-free alternative for PU gloves
Free from harmful substances in line with OEKO-TEX® Standard 100
Protection features

Certified according to EN 388 (3 X 4 2 C), DIN EN 16350:2014
ESD function protects workpieces against electrostatic discharge
Suitable in potentially explosive atmospheres
Excellent grip in oily, slightly damp and dry areas
Outstanding mechanical abrasion resistance of the aqua polymer Xtra Grip coating
High level of cut protection and high tear resistance due to the optimal material composition
No need to remove the glove thanks to touchscreen compatibility
Application areas

Cut protection (cut level C) and ESD protection for assembling and handling parts with sharp edges
Fine assembly work
Precision work
Inspection
Sorting
Packaging
Working on industrial screens, tablets and mobile phones
Maintenance and service work

uvex phynomic C XG cut protection glove (cut level C) with excellent grip in oily conditions and touchscreen function
The best grip in oily conditions in its class. The Xtra Grip coating ensures excellent grip in oily areas and a long service life of the glove. For increased sustainability and safety. uvex phynomic cut protection gloves come from our carbon-neutral production in Germany. They feel like a second skin, are sensitive and meet the highest requirements for protecting your health (proDERM®). Thanks to touchscreen compatibility with all common screens, tablets and mobile phones, there is no need to take off the uvex phynomic C XG.

General features

Lightweight and sensitive glove with a high level of cut protection for mechanical activities in damp and oily areas
Aqua polymer Xtra Grip coating on the palm and fingertips
Touchscreen compatibility
The long service life of the glove reduces costs and waste
Excellent fit, feels like a second skin
Comfort features

Excellent tactile feel
High level of breathability due to the porous foam coating
Perfect fit due to slim-fit design and 3D-Ergo technology
Safety glove free of allergenic accelerators — dermatologically approved (proDERM®) health protection and skin compatibility
Suitable for allergy sufferers and a solvent-free alternative for PU gloves
Free from harmful substances in line with OEKO-TEX® Standard 100
Protection features

Certified according to EN 388 (4 X 4 2 C)
Excellent grip in oily, slightly damp and dry areas
Outstanding mechanical abrasion resistance of the aqua polymer Xtra Grip coating
High level of cut protection and high tear resistance due to the optimal material composition
No need to remove the glove thanks to touchscreen compatibility
Application areas

Cut protection (cut level C) for assembling and handling parts with very sharp edges
Fine assembly work
Precision work
Inspection
Sorting
Packaging
Working on industrial screens, tablets and mobile phones
Maintenance and service work

uvex profi pure HG — innovative safety glove with outstanding grip in wet conditions
Unrivalled grip in wet conditions. The innovative Hydro-Grip special polymer coating sets a completely new benchmark. This waterproof glove offers increased grip in wet and damp working areas, both indoors and outdoors. Thanks to the cotton fibre on the inside of the glove, your skin will also stay dry all day long. In addition, the uvex profi pure HG is produced at our carbon-neutral site in Germany and is proDERM®-certified.

General features

Waterproof safety glove with innovative uvex Hydro-Grip technology
Unique grip in wet working areas
Coating on the palm and entire back of the hand
Comfort fit, high level of wearer comfort thanks to cotton on the skin
Comfort features

Very high level of wearer comfort thanks to the high level of moisture absorption of the cotton lining
Ergonomic fit
High level of flexibility
Dermatologically approved health protection and skin compatibility (proDERM®)
Suitable for allergy sufferers and a solvent-free alternative for PU gloves
Free from harmful substances in line with OEKO-TEX® Standard 100
Protection features

Certified according to EN 388 (2 1 2 1 X), EN 407 (X 1 X X X X)
Excellent grip in wet areas thanks to the innovative Hydro-Grip special coating
Protection against contact heat up to 100°C
Application areas

Working in outdoor areas
Installation of water pipes, drainage systems
Working outdoors
Concrete and construction work
Scaffolding
Manual handling, service work

SPECIFICATIONS
Soft leather hand and fingers
Thicker suede leather cuff
Size 10
Thermal rating: 4.1.3.X.4.X. EN12477, Type A EN388
Manufactured to: EN ISO 21420, EN12477, EN407, EN388
Mechanical hazard rating: 2.1.1.1

Technical specification
Type
Welding Gauntlet
Pairs
1
Size
10
Packaged Weight
0.17kg

SPECIFICATIONS
Fully cotton lined interior
Suede leather exterior
Size 10
Thermal rating: 4.1.3.1.4.X EN12477, Type A EN388
Manufactured to: EN ISO 21420, EN12477, EN407, EN388
Mechanical hazard rating: 4.1.4.4

Product description
Fully cotton lined interior with a suede leather exterior, These thick WG10A leather gloves provide comfort as well as impact and heat protection whilst welding.

Technical specification
Type
Welding Gauntlet
Size
10
Pairs
1
Packaged Weight
0.39kg

Ultra-thin, durable insulated gloves: reliable protection up to 1000V.

Important:
Before use, always ensure that the gloves have no tears. Even a small cut may affect the safety of the insulating gloves.

uvex rubiflex S XG27B chemical protection glove – with excellent grip
The lightweight uvex rubiflex S XG chemical protection glove with innovative Xtra Grip coating. It combines protection and grip with outstanding comfort and flexibility. As well as being comfortable to wear, stockinette chemical protection gloves also offer good protection against a wide variety of chemical and mechanical hazards.

General features

Lightweight, stockinette NBR chemical protection glove with optimal grip properties
Fully coated with special NBR coating (nitrile rubber) and XG Grip coating, approx. 0.40 mm thick
Colour: blue, black
Available in sizes: 7 to 11
AQL 1,5
Protection features

Certified to EN 388:2016 (3 1 2 1 X), EN 407:2020 (X 1 X X X X) and EN ISO 374-1:2016/Type A (J K N O P T)
Very good mechanical abrasion resistance and good lifecycle thanks to multi-layered structure
Outstanding grip in wet and oily areas thanks to uvex Xtra Grip technology
Good resistance to grease, mineral oils and many chemicals
Comfort features

Excellent tactile sensation
Ergonomic fit
Outstanding wearer comfort due to the high-quality cotton interlock supporting material
Extremely high flexibility
Free of harmful substances in accordance with OEKO-TEX® Standard 100
Applications

Safety glove with cotton layer and NBR coating, suitable for working with chemicals in:

Automotive industry
Chemical industry
Laboratories
Maintenance
Metalworking

uvex rubiflex S NB40S chemical protection glove
The uvex rubiflex S NB40S chemical protection glove is engineered for superior protection against a wide range of chemicals, including acids, alkalis, mineral oils, and solvents. Featuring a fully coated nitrile rubber (NBR) exterior and a reinforced cotton interlock lining, these gloves offer excellent mechanical abrasion resistance and heat insulation. Certified to EN 388:2016 and EN ISO 374-1:2016/Type A standards, they ensure reliable protection in demanding environments. The ergonomic fit and high flexibility provide outstanding wearer comfort and tactile sensitivity, making them ideal for use in the chemical industry, automotive sector, and food processing.

General features

NBR chemical protection glove with reinforced cotton interlock supporting material
Fully coated with special NBR coating (nitrile rubber), approx. 0.50 mm thick
Colour: green
Available in sizes: 8 to 11
AQL 1,5
Protection features

Certified to EN 388:2016 (2 1 2 1 X) and EN ISO 374-1:2016/Type A (J K N O P T)
Good mechanical abrasion resistance thanks to the NBR coating
Good resistance to many chemicals, acids, alkalis, mineral oils and solvents
Good heat insulation with reinforced supporting material
Comfort features

Good tactile sensation
Ergonomic fit
Outstanding wearer comfort due to the high-quality cotton interlock supporting material
Highly flexible
Free of harmful substances in accordance with OEKO-TEX® Standard 100
Applications

Safety glove with cotton layer and NBR coating, suitable for working with chemicals in:

Automotive industry
Chemical industry
Machinery and tool manufacturing
Metalworking
Sandblasting
Food processing

uvex rubiflex S NB35S chemical protection glove
For these chemical protection gloves, a thicker cotton interlock lining is used. This makes the uvex rubiflex S suitable for many applications in which protection against chemicals and increased mechanical protection (for example against heat) is required. The special 60 or 80 cm version is also available with an elasticated gauntlet end.

General features

NBR chemical protection glove with reinforced cotton interlock supporting material
Fully coated with special NBR coating (nitrile rubber), approx. 0.50 mm thick
Colour: green
Available in sizes: 8 to 11
AQL 1,5
Protection features

Certified to EN 388:2016 (2 1 2 1 X) and EN ISO 374-1:2016 / Type A (J K N O P T)
Good mechanical abrasion resistance thanks to the NBR coating
Good resistance to many chemicals, acids, alkalis, mineral oils and solvents
Good heat insulation with reinforced supporting material
Comfort features

Good tactile sensation
Ergonomic fit
Outstanding wearer comfort due to the high-quality cotton interlock supporting material
Highly flexible
Free of harmful substances in accordance with OEKO-TEX® Standard 100
Applications

Safety glove with cotton layer and NBR coating, suitable for working with chemicals in:

Automotive industry
Chemical industry
Machinery and tool manufacturing
Metalworking
Sandblasting
Food processing

uvex rubiflex S NB27B chemical protection glove – lightweight and flexible
As well as being comfortable to wear, the uvex rubiflex stockinette chemical protection glove offers a high level of protection against a diverse range of chemical and mechanical risks. With outstanding tactile feel, touch monitors can also be operated while wearing the glove – in the chemical, automotive and even food industries.

General features

Very lightweight, stockinette NBR chemical protection glove for handling a range of chemicals
Fully coated with special NBR coating (nitrile rubber), approx. 0.40 mm thick
Suitable for operating touch displays
Suitable for use in the food industry
Length of gauntlet: approx. 27 cm
Colour: blue
Available in sizes: 7 to 11
AQL 1,5
Protection features

Certified to EN 388:2016 (2 1 1 1 X) and EN ISO 374-1:2016/Type A (J K N O P T)
Good mechanical abrasion resistance thanks to the NBR coating
Good resistance to grease, mineral oils and many chemicals
Good grip in damp and wet areas
Comfort features

Outstanding tactile feel
Ergonomic fit
Extremely high flexibility
Outstanding wearer comfort due to the high-quality cotton interlock supporting material
Free of harmful substances in accordance with OEKO-TEX® Standard 100
Areas of application

Automotive industry
Chemical industry
Laboratories
Painting work
Food processing

uvex u-chem 3100 chemical protection glove – durable and versatile
The uvex u-chem 3100 is a full chemical protection glove certified to EN ISO 374-1:2016/Type A (A J K L M O). This model also offers good mechanical protection and is therefore ideal for use in a wide range of applications.

General features

Chemical protection glove with excellent grip
With gauntlet
Colour: black
Available in sizes: 8 to 11
AQL 1,5
Protection features

Certified to EN 388:2016 (4 1 2 1 X) and EN ISO 374-1:2016/Type A (A J K L M O)
Very good mechanical protection
Good resistance to many chemicals
Very good grip in wet and oily conditions
Comfort features

Good fit
Highly flexible
Areas of application

Chemical industry
Automotive industry
Metalworking industry
Mechanical industries, sand blasting

uvex phynomic B XG cut protection glove (cut level B) with excellent grip in oily conditions and touchscreen function
The best grip in oily conditions in its class. The Xtra Grip coating ensures excellent grip in oily areas and a long service life of the glove. For increased sustainability and safety. uvex phynomic cut protection gloves come from our carbon-neutral production in Germany. They feel like a second skin, are sensitive and meet the highest requirements for protecting your health (proDERM®). Thanks to touchscreen compatibility with all common screens, tablets and mobile phones, there is no need to take off the uvex phynomic B XG.

General features

Lightweight and sensitive cut protection glove for mechanical activities in damp and oily areas
Aqua polymer Xtra Grip coating on the palm and fingertips
Touchscreen compatibility
The long service life of the glove reduces costs and waste
Excellent fit, feels like a second skin
Comfort features

Excellent tactile feel
High level of breathability due to the porous foam coating
Perfect fit due to slim-fit design and 3D-Ergo technology
Dermatologically approved (proDERM®) health protection and skin compatibility
Suitable for allergy sufferers and a solvent-free alternative for PU gloves
Certified in line with uvex harmful substances standard and OEKO-TEX® Standard 100
Protection features

Certified according to EN 388 (4 X 4 2 B)
Excellent grip in oily, slightly damp and dry areas
Outstanding mechanical abrasion resistance of the aqua polymer Xtra Grip coating
High level of cut protection and high tear resistance due to the optimal material composition
No need to remove the glove thanks to touchscreen compatibility
Application areas

Fine assembly work
Precision work
Inspection
Sorting
Packaging
Working on industrial screens, tablets and mobile phones
Maintenance and service work
Sustainability

Carbon footprint: 0.67 kg CO₂ eq
Carbon footprint of production: 0.15 kg CO₂ eq
Carbon footprint of materials: 0.49 kg CO₂ eq
Carbon footprint of transportation: 0.02 kg CO₂ eq
Carbon footprint of packaging: 0.01 kg CO₂ eq
CO₂ - time of calculation: 04/2024
Legal notice regarding carbon footprint: Calculation method: IPCC 2021 GWP 100a (based on ISO 14067) SimaPro 9.5.0.0 ecoinvent database 3.9. Scope: cradle-to-customer. These CO₂ values are valid at the time of calculation and may be subject to change.

uvex phynomic XG planet safety glove – the best grip in oily conditions and made with 50% polyamide recyclate
The uvex phynomic series is ideal for all types of work where a high level of feeling is required. These touch-sensitive safety gloves fit like a second skin and are especially light and flexible – without making your hands sweaty. With its innovative Xtra Grip aqua-polymer foam coating, the uvex phynomic XG sets new standards in grip when working with oily items. Manufactured at our carbon-neutral production facility in Germany, the uvex phynomic XG is now made of over 50% sustainable material (polyamide recyclate). Thanks to touchscreen compatibility on all standard screens, tablets and mobile phones, you’ll never need to remove the uvex phynomic XG while working.

General features

Upgrade of the uvex phynomic XG model with touchscreen compatibility and 50% sustainable material (polyamide recyclate)
Flexible and extremely durable assembly glove with the best oil grip in its class
Suitable for mechanical tasks in both damp and oily environments as well as in dry environments
Aqua-polymer Xtra Grip foam coating on palm and fingertips
Touchscreen compatibility
Colour: black
Available in sizes: 6 to 12
Protection features

Certified to EN 388:2016 (4 1 2 1 X)
Outstanding mechanical abrasion resistance thanks to the aqua-polymer Xtra Grip coating
Excellent grip in oily environments
Touchscreen compatibility for use on all standard screens, tablets and mobile phones
Comfort features

Extremely breathable thanks to the open-pore foam coating
Very good tactile sensation when assembling (oily) parts
Perfect fit thanks to the ‘slim-fit’ design and 3D Ergo technology
Excellent skin tolerance, confirmed by dermatologists (uvex pure Standard)
Free from harmful substances in accordance with OEKO-TEX® Standard 100
Skin tolerance and health protection standards confirmed by dermatologists (proDERM)
Applications

Mechanical protection for precision work, all-round activities in the field of:

Precision work
Assembly
Maintenance
Servicing
Repair work
Metal processing
Concrete/construction work
Sustainability

Carbon footprint: 0.28 kg CO₂ eq
Carbon footprint of production: 0.15 kg CO₂ eq
Carbon footprint of materials: 0.10 kg CO₂ eq
Carbon footprint of transportation: 0.02 kg CO₂ eq
Carbon footprint of packaging: 0.01 kg CO₂ eq
CO₂ - time of calculation: 04/2024
Legal notice regarding carbon footprint: Calculation method: IPCC 2021 GWP 100a (based on ISO 14067) SimaPro 9.5.0.0 ecoinvent database 3.9. Scope: cradle-to-customer. These CO₂ values are valid at the time of calculation and may be subject to change.

uvex phynomic wet plus safety glove – with water-repellent aqua-polymer foam coating
The uvex phynomic series is ideal for all types of work where a high level of feeling is required. These safety gloves fit like a second skin and are particularly light and flexible, without making the hands sweat. The anthracite-coloured aqua-polymer foam coating of the uvex phynomic wet offers outstanding protection against humidity.

General features

Safety glove with water-repellent aqua-polymer foam coating for use outdoors
Aqua-polymer foam coating on palm, fingertips and parts of the back of the hand
Colour: blue, anthracite
Available in sizes: 6 to 12
Protection features

Certified in line with EN 388:2016 (3 1 3 1 X)
Outstanding mechanical abrasion resistance thanks to the durable coating
Very good grip in damp, wet and oily areas
Comfort features

High level of breathability with the aqua-polymer foam coating
Very good tactile feel when assembling parts
Perfect fit with 3D Ergo technology
Excellent skin tolerance, confirmed by dermatologists (uvex pure Standard)
Free of harmful substances in line with OEKO-Tex® Standard 100
Excellent skin tolerance – confirmed by the proDERM Institute for Applied Dermatological Research (proDerm studies: 11.0356-02, 11.0482-11)
Areas of application

Precision work
Assembly
Maintenance
Repair work

uvex phynomic B foam cut protection glove – lightweight cut protection
Lightweight, flexible and resilient, the uvex phynomic B foam (formerly uvex phynomic C3) is one of our most popular gloves. With a second skin fit this glove is perfect for any task requiring a low level of cut protection and/or touch sensitivity. uvex phynomic cut-protection gloves are manufactured in our carbon-neutral production facility in Germany and meet the highest standards of health protection (proDERM®). Thanks to touchscreen compatibility on all standard screens, tablets and mobile phones, you’ll never need to remove the uvex phynomic B foam while working.

General features

Upgrade of the uvex phynomic C3 model with touchscreen compatibility
Lightweight and touch-sensitive cut protection glove for mechanical tasks in dry environments
Aqua-polymer foam coating on palm and fingertips
Colour: sky blue
Available in sizes: 6 to 12
Protection features

Certified to EN 388:2016 (4 X 4 2 B)
Outstanding mechanical abrasion resistance thanks to the moisture-repellent aqua-polymer foam coating
Very good grip in dry and slightly damp environments
Good cut protection and high tear resistance thanks to optimum material composition
Touchscreen compatibility for use on all standard screens, tablets and mobile phones
Comfort features

Extremely breathable thanks to the aqua-polymer foam coating
Excellent touch sensitivity when assembling parts
Perfect fit thanks to 3D Ergo technology
Very good skin tolerance – as confirmed by dermatologists
Free from harmful substances in accordance with OEKO-TEX® Standard 100
Very good skin tolerance – as confirmed by the proDERM Institute for Applied Dermatological Research
Applications

Cut protection (level 3/B) for working within:

Precision assembly work
Precision work
Inspection
Sorting
Food processing
Packaging
Sustainability

Carbon footprint: 0.67 kg CO₂ eq
Carbon footprint of production: 0.15 kg CO₂ eq
Carbon footprint of materials: 0.49 kg CO₂ eq
Carbon footprint of transportation: 0.02 kg CO₂ eq
Carbon footprint of packaging: 0.01 kg CO₂ eq
CO₂ - time of calculation: 04/2024
Legal notice regarding carbon footprint: Calculation method: IPCC 2021 GWP 100a (based on ISO 14067) SimaPro 9.5.0.0 ecoinvent database 3.9. Scope: cradle-to-customer. These CO₂ values are valid at the time of calculation and may be subject to change.

uvex phynomic x-foam HV safety glove with finger protection break sections
The uvex phynomic series includes many different models and is ideally suited to all activities requiring a delicate touch. These safety gloves fit like a second skin and are particularly light and flexible, without making the hands sweat. A seamless break section is integrated into the fingers of the uvex phynomic x-foam HV, significantly reducing the tear resistance and thus hugely reducing the risk of serious hand injuries when using manually operated screwdrivers.

General features

Unique safety glove with break sections
Aqua-polymer foam coating on the palm and fingertips
Colour: grey, orange
Available in sizes: 6 to 12
Protection features

Certified in line with EN 388:2016 (3 1 X 1 X)
Reduced tear resistance in the fingers due to seamless break sections, which significantly reduce the risk of hand injuries
Very good mechanical abrasion resistance thanks to the highly damp-resistant aqua-polymer foam coating
Very good grip in dry and slightly damp areas
Comfort features

Highly breathable coating
Outstanding tactile feel when assembling parts
Very good skin compatibility, dermatologically tested (uvex pure standard)
Free from hazardous substances in accordance with OEKO-TEX® Standard 100
Very good skin compatibility – dermatologically tested by the proDERM Institute for Applied Dermatological Research (proDerm studies: 11.0356-02, 11.0482-11)
Areas of application

May be suitable for use when handling moving machine parts
A careful hazard analysis with support from our uvex hand protection specialists is essential before use

uvex phynomic lite safety glove – the lightest glove in its class
The uvex phynomic series is ideal for all types of work where a high level of feeling is required. These safety gloves are like a "second skin" and are especially light and flexible – without making your hands sweaty. The uvex phynomic lite is extremely lightweight, with a composition that makes it suited to particularly delicate tasks.

General features

The most lightweight safety glove in its class, preventing the onset of fatigue
Aqua-polymer impregnation on palm and fingertips
Colour: grey
Available in sizes: 5 to 12
Protection features

Certified to EN 388 (2 1 2 1 X)
Good mechanical abrasion resistance thanks to the very thin but highly durable aqua-polymer impregnation
Good grip in dry and slightly damp areas
Comfort features

Very high level of breathability with the porous coating, which reduces sweating
Outstanding tactile sensation when handling small parts
Perfect fit with 3D Ergo technology
Excellent skin tolerance, confirmed by dermatologists (uvex pure Standard)
Free of harmful substances in accordance with OEKO-TEX® Standard 100
Excellent skin tolerance, – confirmed by the proDERM Institute for Applied Dermatological Research (proDerm studies: 11.0356-02, 11.0482-11)
Applications

Mechanical protection for precision work in the field of:

Precision assembly work
Precision work
Inspection
Sorting
Food processing
Sustainability

Carbon footprint: 0.34 kg CO₂ eq
Carbon footprint of production: 0.15 kg CO₂ eq
Carbon footprint of materials: 0.16 kg CO₂ eq
Carbon footprint of transportation: 0.02 kg CO₂ eq
Carbon footprint of packaging: 0.01 kg CO₂ eq
CO₂ - time of calculation: 04/2024
Legal notice regarding carbon footprint: Calculation method: IPCC 2021 GWP 100a (based on ISO 14067) SimaPro 9.5.0.0 ecoinvent database 3.9. Scope: cradle-to-customer. These CO₂ values are valid at the time of calculation and may be subject to change.

uvex phynomic allround safety glove – the all-rounder among gloves
The uvex phynomic allround safety glove is a versatile choice for various mechanical tasks, offering a perfect balance of protection and comfort. Featuring an aqua-polymer foam coating on the palm and fingertips, these gloves provide excellent grip and mechanical abrasion resistance, even in slightly damp conditions. The lightweight and flexible design ensures a snug fit, making them feel like a second skin. With high breathability and outstanding tactile sensitivity, these gloves are ideal for precision work. Additionally, they are dermatologically tested and free from harmful substances, ensuring excellent skin compatibility.

General features

Lightweight and dirt-resistant all-round safety glove for mechanical activities
Aqua-polymer foam coating on palm and fingertips
Colour: grey, black
Available in sizes: 5 to 12
Protection features

Certified to EN 388:2016 (3 1 2 1 X)
Very good mechanical abrasion resistance thanks to the damp-resistant aqua-polymer foam coating
Good grip in dry and slightly damp areas
Comfort features

Very high level of breathability through the aqua-polymer foam coating
Outstanding tactile sensation when assembling parts
Perfect fit with 3D Ergo technology
Excellent skin tolerance, confirmed by dermatologists (uvex pure Standard)
Free of harmful substances in accordance with OEKO-TEX® Standard 100
Excellent skin tolerance, – confirmed by the proDERM Institute for Applied Dermatological Research (proDerm studies: 11.0356-02, 11.0482-11)
Applications

Mechanical protection for precision work, all-round activities in the field of:

Precision work
Assembly
Maintenance
Shipping/logistics
Packaging
Repair work

uvex profi ergo XG20A – it won't let you down
The uvex profi ergo XG safety glove range features an innovative Xtra Grip coating made from nitrile rubber. It combines protection and grip with outstanding wearer comfort and flexibility. The multilayer design allows for outstanding service life.

General features

Safety glove with uvex Xtra Grip Technology
Palm and 3/4 of the back of the hand with special NBR and Xtra Grip coatings (nitrile rubber)
Colour: white, orange, black
Available in sizes: 6 to 11
Protection features

Certified to EN 388:2016 (3 1 2 1 X)
Excellent mechanical abrasion resistance thanks to the multi-layer design for increased service life
Outstanding grip in damp, wet and oily areas
Comfort features

Good tactile sensation
Ergonomic fit
Highly flexible
Excellent wearer comfort due to the high water vapour absorption of the cotton lining
Free of harmful substances in accordance with OEKO-TEX® Standard 100
Applications

Mechanical protection for heavy-duty jobs in:

Assembly
Inspection
Maintenance
Light to medium metal processing
Concrete/construction work
Outdoor activities

uvex unidur 6659 foam cut protection glove – light, sensitive, cut-resistant
The uvex unidur 6659 foam are lightweight cut protection gloves (level 5/C) with NBR foam coating. Yet the glove offers a high level of sensitivity. It is perfectly suited to precision assembly work requiring tactility and cut protection.

General features

Cut protection glove with NBR foam coating and HPPE fibre
Nitrile foam coating on palm and fingertips
Colour: mottled grey, black
Available in sizes: 6 to 11
Protection features

Certified to EN 388:2016 (4 X 4 4 C)
Outstanding mechanical abrasion resistance with NBR coating
Good grip in dry and slightly damp areas
Very high level of cut protection with HPPE and glass fibre combination
Comfort features

Very good tactile sensation
Highly flexible
Outstanding wearer comfort
Applications

cut protection (level 5/C) for working in:

Automotive industry
Assembly
Maintenance
Metalworking
Shipping/logistics
Sustainability

Carbon footprint: 1.48 kg CO₂ eq
Carbon footprint of production: 0.25 kg CO₂ eq
Carbon footprint of materials: 1.19 kg CO₂ eq
Carbon footprint of transportation: 0.03 kg CO₂ eq
Carbon footprint of packaging: 0.01 kg CO₂ eq
CO₂ - time of calculation: 06/2024
Legal notice regarding carbon footprint: Calculation method: IPCC 2021 GWP 100a (based on ISO 14067) SimaPro 9.5.0.0 ecoinvent database 3.9. Scope: cradle-to-customer. These CO₂ values are valid at the time of calculation and may be subject to change.

uvex unidur 6659 cut protection glove
The uvex unidur 6659 safety glove is designed for high-performance cut protection, featuring a lightweight and flexible design. Made with a combination of HPPE and glass fibre, these gloves provide excellent cut resistance (level 5/C) and mechanical abrasion resistance. The NBR foam coating on the palm and fingertips ensures a secure grip in dry and slightly damp conditions, making them ideal for precision assembly work. Additionally, the gloves offer tactile sensitivity and comfort, allowing for prolonged use without compromising on protection.

General features

Cut protection glove with HPPE fibre
Polyurethane coating on palm and fingertips
Colour: mottled grey
Available in sizes: 7 to 11
Safety features

Certified to EN 388 (4 X 4 2 C)
Outstanding mechanical abrasion resistance
Highest level of cut protection with HPPE and glass fibre combination
Comfort features

High flexibility
Applications

Automotive industry
Metal-work industry
Packaging

uvex unipur 6639 safety glove – the tried-and-tested, light, flexible safety glove
The uvex unipur 6639 is suitable for precision mechanical work in dry to slightly damp work environments. Its robust PU coating is highly abrasion-resistant but still allows an outstanding tactile feel.

General features

Lightweight, sensitive and dirt-resistant PU safety glove for precision mechanical work
PU coating on the palm and fingertips
Colour: black, black
Available in sizes: 6 to 11
Protection features

Certified in line with EN 388:2016 (4 1 3 1 X)
Good mechanical abrasion resistance
Good grip in dry and slightly damp areas
Comfort features

Outstanding tactile feel
Very good fit
Highly flexible
Areas of application

Fine assembly work
Precision work
Inspection
Sorting

uvex unilite 6605 safety glove – light, breathable, flexible
The uvex unilite 6605 is a lightweight, comfortable knitted glove with breathable nitrile foam coating, which is excellently suited to delicate assembly work and other sensitive activities.

General features

Lightweight knitted glove with nitrile foam coating for precision mechanical work
Nitrile foam coating on the palm and fingertips
Colour: black, black
Available in sizes: 6 to 11
Protection features

Certified in line with EN 388:2016 (4 1 2 2 X)
Very good mechanical abrasion resistance with the polyamide liner and the coating
Good grip in dry to slightly damp areas
Comfort features

Breathable
Good tactile feel
Good fit
Highly flexible
Areas of application

Fine assembly work
Assembly of small parts
Inspection
Sorting

uvex unipur 6634 safety glove – lightweight and flexible
The uvex unipur 6634 is suitable for precision mechanical work in damp work environments, particularly when working outdoors. Its robust NBR coating is highly abrasion-resistant but still allows a good tactile feel.

General features

Moisture-resistant NBR safety glove for mechanical applications outdoors
NBR coating on the palm and fingertips
Colour: grey, black
Available in sizes: 7 to 10
Protection features

Certified in line with EN 388:2016 (4 1 3 1 X)
Very good mechanical abrasion resistance with the polyamide liner and the NBR coating
Good grip in damp areas
Comfort features

Good tactile feel
Good fit
Highly flexible
Areas of application

Fine assembly work
Precision work
General maintenance work
Repair work

uvex unipur 6631 – the tried-and-tested, lightweight, flexible glove
The uvex unipur is suitable for mechanical precision work in dry or slightly damp working environments. Its robust PU coating is very abrasion-resistant, while still providing outstanding tactile sensation.

General features

Polyurethane coating on palm and fingertips
Colour: grey, grey
Available in sizes: 6 to 11
Protection features

Certified to EN 388:2016 (4 1 4 1 X)
Good mechanical robustness and abrasion resistance due to the polyamide liner and polyurethane coating
Comfort features

Outstanding tactile feel
Very good fit
Highly flexibile
Applications

Mechanical protection for precision work in the field of:

Precision assembly work
Precision work
Precision engineering
Inspection
Sorting

uvex athletic lite – extremely breathable and lightweight safety glove
The new uvex athletic lite “slim-fit” assembly gloves allow precision work with high levels of wearer comfort. The slim ergonomic fit allows the wearer to feel and grip workpieces very effectively. The fine-structured, open-pored microfoam coating makes the gloves very breathable, which reduces excessive perspiration. The result: Work without fatigue throughout the day.

General features

Outer material made from polyamide and elastane
Matte, open-pored and particularly abrasion-resistant microfoam coating
Protective features

Certified in line with EN 388 (4 1 3 1 X)
Very good grip in dry and slightly damp areas
Comfort features

Perfect fit thanks to the “slim fit” design and elastane in the liner
High breathability thanks to open-pored coating – reduces perspiration inside the safety glove
Safety glove with knitted cuff
Areas of application

Precision assembly work
Repair work
Inspection
Sorting
Sustainability

Carbon footprint: 0.46 kg CO₂ eq
Carbon footprint of production: 0.25 kg CO₂ eq
Carbon footprint of materials: 0.18 kg CO₂ eq
Carbon footprint of transportation: 0.02 kg CO₂ eq
Carbon footprint of packaging: 0.01 kg CO₂ eq
CO₂ - time of calculation: 04/2024
Legal notice regarding carbon footprint: Calculation method: IPCC 2021 GWP 100a (based on ISO 14067) SimaPro 9.5.0.0 ecoinvent database 3.9. Scope: cradle-to-customer. These CO₂ values are valid at the time of calculation and may be subject to change.

uvex unilite thermo plus cut - robust hand protection for cold working conditions
The uvex unilite thermo plus cut c is a winter safety glove, that combines protection against thermal risks (cold) with very good cut protection (Level C). Characterised by an extremely robust polymer coating which is flexible even at low temperatures. Acrylic provides good insulation.

General features

Winter glove with dual-layer design
Polymer coating on the back of the hand that is flexible at low temperatures
Colour: black,lime
Available in sizes: 7 to 11
Protection features

Certified to EN 388:2016 (3 X 4 2 C) and EN 511 (0 2 X)
Excellent blade cut resistance (level C)
Good mechanical abrasion resistance with a polymer coating that is flexible at low temperatures
Good grip in dry and slightly damp areas
Very good thermal insulation in direct contact with cold objects
Comfort features

Good tactile sensation
Good fit
Highly flexible
Good wearer comfort
Applications

Work in cold environments
Concrete/construction work
Refrigerated warehouse/stores
Forklift drivers

uvex unilite thermo plus safety glove – robust hand protection for cold working conditions
The uvex unilite thermo plus safety glove is designed for robust hand protection in cold working conditions. Featuring a dual-layer construction of acrylic and new wool, these gloves ensure excellent thermal insulation and comfort. The flexible polymer coating on the palm and 3/4 of the back of the hand provides good mechanical abrasion resistance and a secure grip in dry and slightly damp environments. Certified to EN 388:2016 and EN 511 standards, these gloves offer reliable protection against physical hazards and cold, making them ideal for heavy-duty tasks in refrigerated warehouses, construction, and other cold environments.

General features

Winter glove with dual-layer design
Polymer coating on palm and 3/4 of the back of the hand that is flexible at low temperatures
Colour: black, black
Available in sizes: 7 to 11
Protection features

Certified to EN 388:2016 (3 1 3 1 X) and EN 511 (0 1 0)
Good mechanical abrasion resistance with a polymer coating that is flexible at low temperatures
Good grip in dry and slightly damp areas
Very good thermal insulation in direct contact with cold objects
Comfort features

Good tactile sensation
Good fit
Highly flexible
Good wearer comfort
Applications

Mechanical protection for heavy-duty jobs in:

Work in cold environments
Concrete/construction work
Refrigerated warehouse/stores
Forklift drivers

uvex unilite thermo winter safety glove – robust hand protection for cold working conditions
The uvex unilite thermo safety glove is designed for robust hand protection in cold working conditions. Featuring a dual-layer construction of acrylic and new wool, these gloves ensure excellent thermal insulation and comfort. The flexible polymer coating on the palm and fingertips provides good mechanical abrasion resistance and a secure grip in dry and slightly damp environments. Certified to EN 388:2016 and EN 511 standards, these gloves offer reliable protection against physical hazards and cold, making them ideal for heavy-duty tasks in refrigerated warehouses, construction, and other cold environments.

General features

Winter glove with dual-layer design
Polymer coating on palm and fingertips that is flexible at low temperatures
Colour: black, black
Available in sizes: 7 to 11
Protection features

Certified to EN 388:2016 (3 1 3 1 X) and EN 511 (0 1 0)
Good mechanical abrasion resistance with a polymer coating that is flexible at low temperatures
Good grip in dry and slightly damp areas
Very good thermal insulation in direct contact with cold objects
Comfort features

Good tactile sensation
Good fit
Highly flexible
Good wearer comfort
Applications

Mechanical protection for heavy-duty jobs in:

Work in cold environments
Concrete/construction work
Refrigerated warehouse/stores
Forklift drivers

uvex C500 – the reliable cut protection glove
The uvex C500 series sets standards regarding protection, comfort, flexibility, tactility and economy. This high-tech protective glove combines all of these qualities with the highest level of cut protection, level 5/C.

General features

Cut protection glove with excellent wearer comfort
Uncoated
Colour: lime
Available in sizes: 7 to 11
Protection features

Certified to EN 388:2016 (1 X 4 X C)
Outstanding mechanical abrasion resistance
Excellent grip in dry environments
Very high level of cut protection with patented uvex Bamboo TwinFlex® technology
Comfort features

Highly flexible
Very good tactile sensation
Perfect fit with 3D Ergo technology
Free of harmful substances in accordance with OEKO-TEX® Standard 100
Silicone-free according to imprint test
Highly breathable thanks to uvex climazone
Applications

Cut protection (level 5/C) for working in:

Automotive industry
Assembly
Maintenance
Metalworking
Shipping/logistics
Sorting
Glass handling
Sheet metal processing
Paper industry
Building and construction industry
Iron/steel industry

uvex C500 dry – the cut protection glove with excellent grip
The uvex C500 series sets standards regarding protection, comfort, flexibility, tactility and economy. This high-tech safety glove combines all of these qualities with the highest level of cut protection, level 5/C. The uvex C500 dry with HPV grip dots guarantees outstanding tactile sensation, flexibility and grip.

General features

Cut protection glove with excellent wearer comfort
Palm and fingers with High-Performance Vinyl (HPV) grip
Colour: lime, anthracite
Available in sizes: 7 to 11
Protection features

Certified to EN 388:2016 (X X 4 X C)
Excellent grip in dry environments
Very high level of cut protection with patented uvex Bamboo TwinFlex® technology
Comfort features

Highly flexible
Very good tactile sensation
Perfect fit with 3D Ergo technology
Free of harmful substances in accordance with OEKO-TEX® Standard 100
Silicone-free according to imprint test
Highly breathable thanks to uvex climazone
Applications

Cut protection (level 5/C) for working in:

Automotive industry
Assembly
Maintenance
Metalworking
Shipping/logistics
Sorting
Glass handling
Sheet metal processing
Paper industry
Building and construction industry
Iron/steel industry

uvex C500 foam cut protection glove with Bamboo TwinFlex® technology
The uvex C500 series sets new standards regarding protection, comfort, flexibility, tactility and economy. Made with the latest generation of patented uvex Bamboo TwinFlex® technology, the uvex C500 foam glove combines comfort features such as maximum flexibility, perfect fit and dexterity with cut protection performance (level 5/C). The uvex C500 foam is especially suitable for dry or slightly damp working conditions.

General features

Cut protection glove with excellent wearer comfort
Palm and fingertips with High-Performance Elastomer (HPE) and soft-grip foam coating
Colour: lime, anthracite
Available in sizes: 7 to 11
Protection features

Certified to EN 388:2016 (4 X 4 2 C) and to EN 407 (X 1 X X X X)
Outstanding mechanical abrasion resistance thanks to the soft-grip coating
Good grip in dry and slightly damp environments
High level of cut protection with patented uvex Bamboo TwinFlex® technology
In accordance with EN 407, the model is suitable for contact warmth up to +100 °C
Comfort features

Highly flexible
Very good tactile sensation
Perfect fit with 3D Ergo technology
Free of harmful substances in accordance with OEKO-TEX® Standard 100
Silicone-free according to imprint test
Highly breathable thanks to uvex climazone
Applications

Cut protection (level 5/C) for working in:

Automotive industry
Assembly
Maintenance
Metalworking
Shipping/logistics
Sorting
Glass handling
Sheet metal processing
Paper industry
Building and construction industry
Iron/steel industry
Sustainability

Carbon footprint: 0.76 kg CO₂ eq
Carbon footprint of production: 0.15 kg CO₂ eq
Carbon footprint of materials: 0.58 kg CO₂ eq
Carbon footprint of transportation: 0.02 kg CO₂ eq
Carbon footprint of packaging: 0.01 kg CO₂ eq
CO₂ - time of calculation: 04/2024
Legal notice regarding carbon footprint: Calculation method: IPCC 2021 GWP 100a (based on ISO 14067) SimaPro 9.5.0.0 ecoinvent database 3.9. Scope: cradle-to-customer. These CO₂ values are valid at the time of calculation and may be subject to change.

C500 M foam cut protection glove with Bamboo Twin Flex® Technology
The uvex C500 series sets standards regarding protection, comfort, flexibility, tactility and economy. This high-tech safety glove combines all of these qualities with the highest level of cut protection, level 5/C. The uvex C500 M foam is especially suitable for damp working conditions.

General features

Cut protection safety gloves with outstanding wearer comfort
High-performance elastomer (HPE) and SoftGrip foam coating on palm and fingertips
Colour: lime, black, anthracite
Available in sizes: 7 to 11
Protection features

Certified to EN 388:2016 (4 X 4 2 C) and to EN 407 (X 1 X X X X)
Suitable for contact heat up to +100 °C
High abrasion resistance thanks to the innovative Soft-Grip-Coating
Very good grip in damp areas
Partially reinforced thumb joints
High cut protection (level C) with Bamboo Twin Flex® Technology
Comfort features

Outstanding tactile sensation when assembling parts
Perfect fit with 3D Ergo technology
Free of harmful substances in accordance with OEKO-TEX® Standard 100
Silicone-free according to imprint test
Applications

Cut protection (level C) for working within:

Automotive industry
Construction
Brewery, beverage industry
Glass industry
Maintenance, servicing
Metal work industry

uvex D500 foam cut protection glove featuring Bamboo TwinFlex® technology
Made with the latest generation of patented uvex Bamboo TwinFlex® technology, the uvex D500 foam glove combines comfort features such as maximum flexibility, perfect fit and dexterity with outstanding cut protection performance to EN 388:2016 (level D) standard. The glove is highly resistant to abrasion, for prolonged product life and exceptional cost efficiency.

General features

Very flexible and sensitive cut protection glove for mechanical activities
High-performance elastomer (HPE) and SoftGrip foam coating on palm and fingertips
Colour: lime, anthracite
Available in sizes: 7 to 11
Protection features

Certified to EN 388:2016 (4 X 4 2 D)
High abrasion resistance thanks to the innovative Soft-Grip-Coating
Very good grip in dry and slightly damp areas
Very high cut protection (level D) with Bamboo Twin Flex® Technology
Comfort features

Outstanding tactile sensation when assembling parts
Perfect fit with 3D Ergo man mold technology
Free of harmful substances in accordance with OEKO-TEX® Standard 100
Applications

Cut protection (level D) for working within:

Automotive industry
Construction
Brewery, beverage industry
Glass industry
Maintenance, servicing
Metal work industry

uvex unidur 6659 foam GR cut protection glove
Part of the SelectToGo 3 colour glove system, the uvex unidur 6659 foam GR foam are lightweight cut protection gloves (level 5/C) with NBR foam coating - suitable for increased cut risk hazards. The glove offers a high level of sensitivity and is perfectly suited to assembly work requiring tactility and cut protection.

General features

Cut protection with HPPE and glass fibre combination
Nitrile foam coating on palm and fingertips
Colour: green, black
Available in sizes: 7 to 11
Protection features

Certified to EN 388:2016 (4 X 4 4 C)
Outstanding mechanical abrasion resistance with NBR coating
Good grip in dry and slightly damp areas
Very high level of cut protection with HPPE and glass fibre combination
Comfort features

Very good tactile sensation
Highly flexible
Outstanding wearer comfort
Applications

Cut protection (level 5/C) for working in:

Automotive industry
Assembly
Maintenance
Metalworking
Shipping/logistics

uvex unidur 6659 PU GR cut protection made easy
Part of the SelectToGo 3 colour glove system, the uvex unidur 6659 PU GR are lightweight cut protection gloves (level 5/C) with a PU coating - suitable for increased cut risk hazards. The HPPE fibre plus the glass fibre ensure high cut protection plus the polyurethane coating provides all round protection. The elastane within the glove gives you flexibility and a comfortable fit complete with a knitted cuff.

General features

Cut protection with HPPE and glass fibre combination
PU coating on palm and fingertips
Colour: green, black
Available in sizes: 7 to 11
Protection features

Certified to EN 388:2016 (4 X 4 2 C)
Outstanding mechanical abrasion resistance with NBR coating
Good grip in dry and slightly damp areas
Very high level of cut protection with HPPE and glass fibre combination
Comfort features

Very good tactile sensation
Highly flexible
Outstanding wearer comfort
Applications

Cut protection (level 5/C) for working in:

Automotive industry
Assembly
Maintenance
Metalworking
Shipping/logistics

uvex unidur 6649 foam OR cut protection glove
Part of the SelectToGo 3 colour glove system, the uvex unidur 6649 foam OR is a lightweight, NBR foam coated HPPE assembly glove with cut protection level 3/B - suitable for medium cut risk hazards. This glove is also extremely sensitive. It is exceptionally well suited to fine assembly work in which a high level of tactility and cut protection are required.

General features

Cut protection glove with HPPE fibre and polyamide
NBR foam coating on the palm and fingertips
Colour: orange,black
Available in sizes: 6 to 11
Protection features

Certified in line with EN 388:2016 (4 3 4 4 B)
Outstanding mechanical abrasion resistance
Good grip in dry and slightly damp areas
Good cut protection thanks to the HPPE fibre
Extremely dirt-resistant
Comfort features

Good tactile feel
Highly flexible
Good wearer comfort
Areas of application

Automotive industry
Maintenance work
Light to moderate metal working
Packing work

uvex unigrip PL 6628 RD cut protection glove
Part of the SelectToGo 3 colour glove system, the uvex unigrip PL 6628 RD is a PE knitted safety gloves with textured latex coating on the palms and fingertips, giving good grip in both wet and dry applications. Durable multi-purpose glove - suitable for low cut risk hazards.

General features

Dirt-resistant PU safety glove for mechanical work
Latex coating on the palm and fingertips
Colour: red, black
Available in sizes: 7 to 11
Protection features

Certified in line with EN 388:2016 (2 1 4 2 X)
Exceptional mechanical abrasion resistance
Secure grip
Good mechanical strength
Comfort features

Good tactile feel
Very good fit
Areas of application

General purpose

uvex unilite 6605 RD cut protection glove
Part of the SelectToGo 3 colour glove system, the uvex unilite 6605 RD is a lightweight, comfortable knitted glove with breathable nitrile foam coating, which is excellently suited to assembly work and other sensitive activities. Suitable for low cut risk hazards.

General features

Lightweight, dirt-resistant PU safety glove for mechanical work
Nitrile foam coating on the palm and fingertips
Colour: red, black
Available in sizes: 7 to 11
Protection features

Certified in line with EN 388:2016 (4 1 3 2 X)
Very good mechanical abrasion resistance with the polyamide liner and the coating
Good grip in dry and slightly damp areas
Comfort features

Good tactile feel
Very good fit
Highly flexible
Areas of application

Assembly work
Inspection
Sorting

uvex unipur 6639 PU RD cut protection glove
Part of the SelectToGo 3 colour glove system, the uvex unipur 6639 PU RD is suitable for precision mechanical work in dry to slightly damp work environments - suitable for low cut risk hazards. The robust PU coating is highly abrasion-resistant but still allows an outstanding tactile feel, ideal for dirty environments.

General features

Lightweight, sensitive and dirt-resistant PU safety glove for precision mechanical work
PU coating on the palm and fingertips
Colour: red, black
Available in sizes: 7 to 11
Protection features

Certified in line with EN 388:2016 (4 1 3 1 X)
Good mechanical abrasion resistance
Good grip in dry and slightly damp areas
Comfort features

Outstanding tactile feel
Very good fit
Highly flexible
Areas of application

Fine assembly work
Precision work
Inspection
Sorting

uvex D500 foam cut protection glove featuring Bamboo TwinFlex® technology
Made with the latest generation of patented uvex Bamboo TwinFlex® technology, the uvex D500 foam glove combines comfort features such as maximum flexibility, perfect fit and dexterity with outstanding cut protection performance to EN 388:2016 (level D) standard. The glove is highly resistant to abrasion, for prolonged product life and exceptional cost efficiency.

General features

Very flexible and sensitive cut protection glove for mechanical activities
High-performance elastomer (HPE) and SoftGrip foam coating on palm and fingertips
Colour: lime, anthracite
Available in sizes: 7 to 11
Protection features

Certified to EN 388:2016 (4 X 4 2 D)
High abrasion resistance thanks to the innovative Soft-Grip-Coating
Very good grip in dry and slightly damp areas
Very high cut protection (level D) with Bamboo Twin Flex® Technology
Comfort features

Outstanding tactile sensation when assembling parts
Perfect fit with 3D Ergo man mold technology
Free of harmful substances in accordance with OEKO-TEX® Standard 100
Applications

Cut protection (level D) for working within:

Automotive industry
Construction
Brewery, beverage industry
Glass industry
Maintenance, servicing
Metal work industry

uvex Bamboo TwinFlex® D xg: Sustainability, comfort and sensitivity combined with high cut protection (Cut D)
The patented Bamboo TwinFlex® technology combines the best of both worlds in one fine 18-gauge cut protection glove (Cut Level D): On the inside of the glove: Wearers experience noticeable comfort for their skin thanks to the bamboo-viscose. The smooth fit and high moisture absorption with a rapid action provides long-lasting comfort and high wearer acceptance. With a flexible fit thanks to the bamboo-viscose, the glove adapts precisely to fit the shape of the hand within 3 to 5 minutes of wearing. Keep yourself safe from external hazards: High-performance fibres offer a high level of protection against abrasion and cut hazards. The additional uvex protexxion zone in the area between the thumb and index finger provides double the abrasion resistance (200%) compared to the inside of the glove to increase its service life/durability. Thanks to the Xtra-Grip aqua-polymer foam coating, the Bamboo TwinFlex® D xg offers excellent grip in dry and slightly damp/oily conditions. In addition, the Bamboo TwinFlex D xg features a total of 45% sustainable materials: recycled polyamide and bamboo-viscose, which is based on renewable raw materials.

General features

Excellent sensitivity in cut protection level D
High level of wearer comfort thanks to bamboo fibre
45% sustainable materials: recycled polyamide and bamboo viscose, which is based on renewable raw materials
High efficiency due to long service life, all thanks to uvex protexxion + premium Xtra-Grip coating
CO2-neutral production in Germany, free from solvents
Protective features

Certified to EN 388:2016 (4 X 4 1 D) and to EN 407 (X 1 X X X X)
Dermatologically tested for skin compatibility, free from allergenic accelerators
Particularly light, thin and flexible with high cut protection (4X41D according to EN 388:2016)
No need to remove the glove thanks to touchscreen capability
uvex protexxion zone with smooth material surface ensures trouble-free workflow
In accordance with EN 407, the model is suitable for contact warmth up to +100 °C
Comfort features

Patented Bamboo TwinFlex® yarn technology
Silky soft feel against the skin
Fast absorption and high retention of moisture
Adaptive fit: Adapts precisely to fit the shape of any hand within 3 to 5 minutes of wearing
Areas of application

Installation of sharp-edged parts
Areas with use of touchscreens
Brief contact with hot parts (up to 100 °C
Glass and metalworking industry
Automotive industry
Construction industry
Precision work
Quality control
Food processing
Sustainability

Carbon footprint: 0.47 kg CO₂ eq
Carbon footprint of production: 0.15 kg CO₂ eq
Carbon footprint of materials: 0.29 kg CO₂ eq
Carbon footprint of transportation: 0.02 kg CO₂ eq
Carbon footprint of packaging: 0.01 kg CO₂ eq
CO₂ - time of calculation: 04/2024
Legal notice regarding carbon footprint: Calculation method: IPCC 2021 GWP 100a (based on ISO 14067) SimaPro 9.5.0.0 ecoinvent database 3.9. Scope: cradle-to-customer. These CO₂ values are valid at the time of calculation and may be subject to change.

uvex unidur 6659 PU GR cut protection made easy
Part of the SelectToGo 3 colour glove system, the uvex unidur 6659 PU GR are lightweight cut protection gloves (level 5/C) with a PU coating - suitable for increased cut risk hazards. The HPPE fibre plus the glass fibre ensure high cut protection plus the polyurethane coating provides all round protection. The elastane within the glove gives you flexibility and a comfortable fit complete with a knitted cuff.

General features

Cut protection with HPPE and glass fibre combination
PU coating on palm and fingertips
Colour: green, black
Available in sizes: 7 to 11
Protection features

Certified to EN 388:2016 (4 X 4 2 C)
Outstanding mechanical abrasion resistance with NBR coating
Good grip in dry and slightly damp areas
Very high level of cut protection with HPPE and glass fibre combination
Comfort features

Very good tactile sensation
Highly flexible
Outstanding wearer comfort
Applications

Cut protection (level 5/C) for working in:

Automotive industry
Assembly
Maintenance
Metalworking
Shipping/logistics

uvex unidur 6649 foam OR cut protection glove
Part of the SelectToGo 3 colour glove system, the uvex unidur 6649 foam OR is a lightweight, NBR foam coated HPPE assembly glove with cut protection level 3/B - suitable for medium cut risk hazards. This glove is also extremely sensitive. It is exceptionally well suited to fine assembly work in which a high level of tactility and cut protection are required.

General features

Cut protection glove with HPPE fibre and polyamide
NBR foam coating on the palm and fingertips
Colour: orange,black
Available in sizes: 6 to 11
Protection features

Certified in line with EN 388:2016 (4 3 4 4 B)
Outstanding mechanical abrasion resistance
Good grip in dry and slightly damp areas
Good cut protection thanks to the HPPE fibre
Extremely dirt-resistant
Comfort features

Good tactile feel
Highly flexible
Good wearer comfort
Areas of application

Automotive industry
Maintenance work
Light to moderate metal working
Packing work

uvex unigrip PL 6628 RD cut protection glove
Part of the SelectToGo 3 colour glove system, the uvex unigrip PL 6628 RD is a PE knitted safety gloves with textured latex coating on the palms and fingertips, giving good grip in both wet and dry applications. Durable multi-purpose glove - suitable for low cut risk hazards.

General features

Dirt-resistant PU safety glove for mechanical work
Latex coating on the palm and fingertips
Colour: red, black
Available in sizes: 7 to 11
Protection features

Certified in line with EN 388:2016 (2 1 4 2 X)
Exceptional mechanical abrasion resistance
Secure grip
Good mechanical strength
Comfort features

Good tactile feel
Very good fit
Areas of application

General purpose

uvex unilite 7710F fully coated multi-purpose glove for heavy-duty work
The structure of the uvex unilite 7710F seamless polyester assembly gloves, in combination with their full-surface NBR coating with grip finish on the palms of the hands, makes them ideal for working in dry, dirty, wet and oily environments.

General features

Seam-free multi-purpose gloves
Fully coated with nitrile rubber (NBR) for protection against moisture and water reaching the skin
Additional sandy nitrile coating on the palms of the hands for grip and abrasion resistance
Very good dexterity right to the fingertips
Polyester lining material
Colour: blue, black
Available in sizes: 7 to 11
Protective features

Certified according to EN 388:2016 (4 1 2 1 X) and EN 407:2004 (X 1 X X X X)
Excellent grip in dry, damp/wet and oily areas
Exceptional abrasion resistance
Extremely flexible
Areas of application

Construction and metalworking industry
Repair work
Oil and gas industry
Outdoor activities
Dirty working conditions

uvex phynomic allround safety glove
Article number: 60049

Suitable for use in a range of fields
Dirt-resistant
Certified to EN 388:2016 (3 1 2 1 X)
Excellent skin tolerance and free from pollutants

uvex phynomic allround – the all-rounder among gloves
The uvex phynomic series is ideal for all types of work where a high level of feeling is required. These safety gloves are like a "second skin" and are especially light and flexible – without making your hands sweaty. The uvex phynomic allround glove is suitable for all kinds of activities.

General features

Lightweight and dirt-resistant all-round safety glove for mechanical activities
Aqua-polymer foam coating on palm and fingertips
Colour: grey, black
Available in sizes: 5 to 12
Protection features

Certified to EN 388:2016 (3 1 2 1 X)
Very good mechanical abrasion resistance thanks to the damp-resistant aqua-polymer foam coating
Good grip in dry and slightly damp areas
Comfort features

Very high level of breathability through the aqua-polymer foam coating
Outstanding tactile sensation when assembling parts
Perfect fit with 3D Ergo technology
Excellent skin tolerance, confirmed by dermatologists (uvex pure Standard)
Free of harmful substances in accordance with OEKO-TEX® Standard 100
Excellent skin tolerance, – confirmed by the proDERM Institute for Applied Dermatological Research (proDerm studies: 11.0356-02, 11.0482-11)
Applications

Mechanical protection for precision work, all-round activities in the field of:

Precision work
Assembly
Maintenance
Shipping/logistics
Packaging
Repair work

Attribute Value
Product type Mechanical protection
Product family uvex phynomic
Version with knitted cuff
Coating Aqua-polymer foam
Coated area Fingertips, Palm
Product system Construction
Norm EN 388
Standards EN 388:2016 (3 1 2 1 X)
Food-compatible No
Material Elastane, Polyamide
Colour Grey, Black
Size 5, 6, 7, 8, 9, 10, 11, 12
Conditions of the workplace Dry, Light moisture/oily
Use All-round, Maintenance, Assembly, Precision work, Maintenance
Technologies uvex 3D Ergo
Certificates Made in Germany, OEKO-TEX® Standard 100 , proDerm, uvex pure standard
Segment Plastering / Concrete, Driving Machinery / Machine Operator, Masonry / Stone Setting / Stone Work / Bricklaying, Ground Covering / Tiling, Painting / Paper Hanging

uvex athletic lite assembly glove
Article number: 60027

Lightweight and sensitive safety glove for mechanical tasks
Certified in line with EN 388 (4 1 3 1 X)
Perfect fit thanks to the “slim fit” design and elastane in the liner

uvex athletic lite – extremely breathable and lightweight
The new uvex athletic lite “slim-fit” assembly gloves allow precision work with high levels of wearer comfort. The slim ergonomic fit allows the wearer to feel and grip workpieces very effectively. The fine-structured, open-pored microfoam coating makes the gloves very breathable, which reduces excessive perspiration. The result: Work without fatigue throughout the day.

General features

Outer material made from polyamide and elastane
Matte, open-pored and particularly abrasion-resistant microfoam coating
Protective features

Certified in line with EN 388 (4 1 3 1 X)
Very good grip in dry and slightly damp areas
Comfort features

Perfect fit thanks to the “slim fit” design and elastane in the liner
High breathability thanks to open-pored coating – reduces perspiration inside the safety glove
Safety glove with knitted cuff
Areas of application

Precision assembly work
Repair work
Inspection
Sorting
Sustainability

Carbon footprint: 0.46 kg CO₂ eq
Carbon footprint of production: 0.25 kg CO₂ eq
Carbon footprint of materials: 0.18 kg CO₂ eq
Carbon footprint of transportation: 0.02 kg CO₂ eq
Carbon footprint of packaging: 0.01 kg CO₂ eq
CO₂ - time of calculation: 04/2024
Legal notice regarding carbon footprint: Calculation method: IPCC 2021 GWP 100a (based on ISO 14067) SimaPro 9.5.0.0 ecoinvent database 3.9. Scope: cradle-to-customer. These CO₂ values are valid at the time of calculation and may be subject to change.

Attribute Value
Product type Mechanical protection
Product family uvex athletic
Version with knitted cuff
Coating Nitrile rubber (NBR) microfoam coating
Coated area Fingertips, Palm
Product system Construction
Norm EN 388
Standards EN:388 2016 (4 1 3 1 X)
Food-compatible Yes
Material Elastane, Polyamide
Colour Anthracite, Blue
Size 6, 7, 8, 9, 10, 11, 12
Conditions of the workplace Dry, Light moisture/oily
Suitable for Dry and slightly damp areas
Use All-round, Precision assembly work, Maintenance, Inspection work, Precision work, Sorting
Certificates Food compatibility, OEKO-TEX® Standard 100

The Vending LR Cut PU Palm Glove has been specially packed for vending machines. Combining cut resistance, comfort, dexterity and grip in a seamless PU palm dipped liner. The packaging itself has been compressed to maximise machine capacity. .CE certified .Level B cut resistance .Individually packed for vending machines .Compression packed to maximise machine capacity .Smooth PU coating for increased abrasion resistance .Palm dipped to increase dexterity and ventilation .Packaging designed with dual orientation .13 gauge liner for a perfect fit .Breathable seamless liner .Meets EN cut level 3, for premium protection

The premium CT45 cut resistant glove offers exceptional cut level D protection without the use of glass or steel fibres. Coated with Nitrile foam the CT45 offers outstanding grip in wet and dry conditions. The 100% breathable seamless liner offers outstanding comfort for the wearer. .Level D cut resistance .18 gauge liner for extra dexterity .Free from glass and steel fibres .Nitrile foam coating for excellent grip in wet and dry conditions .Retains cut performance level for up to 10 washes .Breathable seamless liner .OEKO-TEX® approved .Retail tag which aids presentation for retail sales .CE certified .ANSI cut level A4 .Wash at 40°C using non-biological detergent, re-shape after wash. Do not tumble dry.

This 18 gauge breathable seamless liner glove offers outstanding dexterity, comfort and cut level C protection. The micro nitrile foam technology enhances comfort which helps to reduce hand fatigue. The ideal choice for precision handling in dry environments. .Level C cut resistance .18 gauge liner for extra dexterity .Free from glass and steel fibres .Retains cut performance level for up to 10 washes .Reinforced thumb crotch for extra protection and durability .Designed specifically for touchscreen devices .Breathable seamless liner .ANSI cut level A3 .Nitrile micro foam coating perfect for ultra high dexterity tasks .Retail tag which aids presentation for retail sales .CE certified .Wash at 40°C using non-biological detergent, re-shape after wash. Do not tumble dry.

Featuring the latest innovation in double coating technology, the Liquid Pro offers maximum liquid protection. The smooth latex is fully coated before a second latex foam palm dip is applied, this process ensures maximum and superior grip is achieved. An elasticated wrist provides for a secure fit. .Liquid Pro offers maximum liquid protection .Latex foam coating for excellent grip in wet and dry conditions .Dual latex coating for additional protection in tough conditions .13 gauge liner for a perfect fit .Lightweight and comfortable .Elasticated cuffs for a secure fit .CE certified .Retail tag which aids presentation for retail sales .Latex dipped for maximum grip .ANSI cut level A1 .ANSI abrasion level 2

Using innovative technology this glove repels water and heavy oils. Liquid placed on this glove rolls off, protecting the underlying surface. The twin liner traps heat and allows breathability. Sandy palm finish gives improved grip. .Water repellent nano coating for light splash applications .Twin liner traps in heat through increased insulation .Sandy finish for exceptional grip in water, grease or oil .Tough 10 gauge liner .Low linting construction for minimal contamination .Breathable seamless liner .CE certified .Retail tag which aids presentation for retail sales

Designed with a dual latex coating for superior grip and protection against liquids and water penetration. The insulated liner protects from cold ensuring hands are kept warm. Ergonomically designed to optimise comfort, enhance dexterity and provide high level of resistant to abrasion and tearing. .Fully coated for maximum liquid protection .Specially designed for use in cold conditions .13 gauge liner for a perfect fit .Latex foam coating for excellent grip in wet and dry conditions .Superb abrasion and tear resistance .Ergonomic design to reduce hand fatigue .CE certified .Retail tag which aids presentation for retail sales .UKCA marked

Premium high strength disposable gloves using innovative crystal grip technology. 7 mil thickness for exceptional strength. Highly durable synthetic nitrile compound make this glove three times stronger than standard nitrile. Silicone Free. Ideal for auto manufacture, electronics, and glass sectors. 100 gloves per box. .Crystal grip technology .Silicone free - Ideal for manufacturing, paint applications, electronics and glass handling where silicone is problematic .Suited for food processing plants and resistant to greases, animal fats and oils .100 gloves per box .Three times stronger than standard nitrile .7mil / 0.18mm thickness for exceptional strength .Highly durable synthetic nitrile compound .Retail box which aids presentation for retail sales .Ideal for auto repair, construction and other sectors .Sold in singles .CE certified .This product is sold in inner boxes .CE foodsafe .UKCA marked .CE-CAT III

Manufactured from synthetic nitrile rubber our disposable nitrile gloves eliminate the risk of allergic reactions associated with latex gloves. Textured finish provides enhanced fingertip grip and dexterity in both wet and dry conditions. 100 gloves per box., .Suited for food processing plants and resistant to greases, animal fats and oils .Disposable nitrile gloves eliminate the risk of allergic reaction associated with latex gloves .0.07mm thickness .Retail box which aids presentation for retail sales .CE certified .UKCA marked

Manufactured from synthetic nitrile rubber our disposable nitrile gloves eliminate the risk of allergic reactions associated with latex gloves. Textured finish provides enhanced fingertip grip and dexterity in both wet and dry conditions. 100 gloves per box., .Suited for food processing plants and resistant to greases, animal fats and oils .Disposable nitrile gloves eliminate the risk of allergic reaction associated with latex gloves .0.07mm thickness .Retail box which aids presentation for retail sales .CE certified .UKCA marked

Manufactured from high grade Poly-vinyl chloride, our Vinyl Disposable Gloves are super soft for superior user comfort and super stretchy to reduce hand fatigue. These gloves are latex free, smooth and non textured with a beaded cuff. 100 gloves per box. .Phthalate Free .Manufactured from high grade poly-vinyl chloride .Smooth and non-textured with a beaded cuff .Super soft for superior user comfort and super stretchy to reduce hand fatigue .Ambidextrous suiting left and right handed users .100 gloves per box .100% latex free .CE certified .Retail box which aids presentation for retail sales .This product is sold in inner boxes .This product is sold in singles .CE foodsafe

Manufactured from high grade Poly-vinyl chloride, our Vinyl Disposable Gloves are super soft for superior user comfort and super stretchy to reduce hand fatigue. These gloves are latex free, smooth and non textured with a beaded cuff. 100 gloves per box. .Phthalate Free .Manufactured from high grade poly-vinyl chloride .Smooth and non-textured with a beaded cuff .Super soft for superior user comfort and super stretchy to reduce hand fatigue .Ambidextrous suiting left and right handed users .100 gloves per box .100% latex free .CE certified .Retail box which aids presentation for retail sales .This product is sold in inner boxes .This product is sold in singles .CE foodsafe

Double dipped PVC gauntlet with sandy palm finish for enhanced grip. Jersey lined for extra wearer comfort. Available in 3 lengths, 27cm, 35cm and 45cm. .Double dipped PVC gauntlet with sandy palm finish for enhanced grip .Jersey lined for extra wearer comfort .Chemical resistant gauntlet .Phthalate Free .1.6mm thickness .Available in 3 lengths, 27cm, 35cm and 45cm .450mm length .CE certified .Chemical resistant .CE-CAT III .UKCA marked

Chemical resistant gauntlet with textured pattern for enhanced grip. Flock lined for added comfort. For use in the chemical, oil and food industries. .Flock lined for added comfort .Textured pattern for enhanced grip .Chemical resistant gauntlet .Retail tag which aids presentation for retail sales .0.40mm thickness .320mm length .CE certified .Chemical resistant .CE-CAT III .UKCA marked

Double dipped latex gauntlet with anti slip pattern for good grip in wet and dry conditions. Ideal for the chemical industry, food processing and industrial cleaning. Chlorinated for improved durability. .Dual latex coating for additional protection in tough conditions .Flock lined for added comfort .Chemical resistant gauntlet .Retail tag which aids presentation for retail sales .0.45mm thickness .300mm length .CE certified .Chemical resistant .CE-CAT III .UKCA marked

Specially designed to reduce the effects of impact and vibration. Excellent levels of comfort and dexterity when using powertools, jack hammers, concrete breakers etc. .Reduces vibration by 40% .Specially designed to reduce the effects of vibration .For use with jack hammers, concrete breakers etc .Specially formulated rubber chloroprene .Tough 10 gauge liner .Breathable seamless liner .CE certified .Retail tag which aids presentation for retail sales

Combining comfort, durability, impact resistance and stylish design, the Powertool Pro is ideal for tradesmen working with powertools and small components. .High performance multi-purpose glove .Thumb, middle and index finger tips left open for precision handling .Durable synthetic leather palm .Reinforced padded palms .Reinforced panels in high wear areas for maximum durability .Wrist strap for secure fitting .CE certified .Retail tag which aids presentation for retail sales

This Cut Resistant Thermal Glove has an added layer of TPR for maximum impact resistance and high flexibility. The nitrile micro foam palm gives superior grip and protection against liquids and water penetration. Ergonomic design for optimised comfort. .Maximum impact protection using TPR pod technology .Specially designed for use in cold conditions .Level C cut resistance .13 gauge liner for a perfect fit .Reinforced thumb crotch for extra protection and durability .Nitrile foam coating for excellent grip in wet and dry conditions .CE certified .Wrist strap for secure fitting .Double dipped coating for durability .Retail tag which aids presentation for retail sales .ANSI cut level A4

Innovative TPR design combined with a level E cut liner makes for an impact glove with exceptional dexterity, comfort and protection. The TPR pods are bonded directly on to the liner instead of traditional machine stitching which allows the glove to move freely with the hand. .Innovative TPV material for supreme impact protection .Level E cut resistance .13 gauge liner for a perfect fit .Flexible sandy nitrile coating offers great grip in wet and dry conditions .Designed with a comfort fit .High visibility liner .CE certified .Retail tag which aids presentation for retail sales .ANSI cut level A6

This high-performing, hand-hugging glove is multi-purpose and suitable for any job. Lightweight for the wearer, this glove has durability built in and features reinforced stitching on the thumb for extra strength with wrist support and protection. .High performance multi-purpose glove .Reinforced stitching on the thumb for extra strength .Wrist support and protection .Lightweight and comfortable .Wrist strap for secure fitting .Retail tag which aids presentation for retail sales .Low linting construction for minimal contamination .CE certified

The cut level D protective sleeve offers cut and heat resistance for the wrist and arm. There is a thumb hole for to ensure the sleave is secure and comfortable. It is machine washable and is sold singly. It is sold in 3 lengths 35cm, 45cm, 56cm. .Level D cut resistance .13 gauge liner for a perfect fit .Cut resistant protective tubular sleeve .Available in 3 lengths, 35cm, 45cm and 56cm .Superior cut and heat resistance .Machine washable .Sold in singles .Thumb hole for secure fit .CE certified .Low linting construction for minimal contamination .Retail tag which aids presentation for retail sales .UKCA marked .Wash at 40°C using non-biological detergent, re-shape after wash. Do not tumble dry.

Optimised innovative design. Maximum cut resistance according to EN388:2016. Over 4000 grams of cut resistance achieving ANSI Cut A7. Coating is double sandy nitrile for excellent durability and grip in wet and dry conditions. Seamless 13 gauge liner for increased wearer comfort. .Level F cut resistance .Seamless 13 gauge liner .Maximum cut resistance according to EN388:2016 .Excellent durability and grip in wet and dry conditions .Breathable seamless liner .Designed to be worn in a tough work environment .ANSI cut level A7 .CE certified .Retail tag which aids presentation for retail sales .UKCA marked