A 3 piece rectangular Cabinet Scraper set. Made from the finest European Steel. Ideal for the fine finishing of wood. Comprises 1 of each:- 6 x 3 inch Scraper5 x 2 1/2 inch Scraper4 x 2 inch Scraper

The Faithfull cabinet scraper will produce a fine finish on solid wood and veneers.Very useful for smoothing knots, burrs, crossed grain and removing old surface finishes. The cabinet scraper removes fine shavings from wood to give a very smooth finish. Unlike an abrasive it does not produce dust which can clog the grain. The cut is controlled by finger pressure to bow out the blade, varying the curve and localising the cut.The scraper can be easily resharpened with a file and a burr turned with a burnishing tool. Made from C60 Spring Steel. Size: 150mm x 60mm

The Faithfull Webbing Stretcher is a beechwood tensioning tool used for installing upholstery webbing. It is rebated on one edge for frame location with a slot and peg for holding the webbing firmly in place during installation. The webbing is looped through the slot and held by the dowel, allowing the stretcher to adjust the web tension prior to fixing.Accepts webbing up to 50mm (2in) wide.

The Faithfull Turning Chisel is are for use on woodturning lathes. They are manufactured from High-Speed Steel; these chisels will perform well in both hard and soft woods. They maintain a sharp cutting edge much longer than their carbon steel equivalents, requiring less time taken up being re-sharpened. They are fitted with full sized contoured walnut handles for user comfort and brass ferrules. This set of 8 woodturning tools supplied in a wooden box which contains: 15mm Diamond Point Scraper.15mm Plain Skew Chisel.25mm Plain Skew Chisel.15mm Parting Tool.15mm Round Nose Scraper.8mm Spindle Gouge.16mm Roughing Out Gouge.20mm Roughing Out Gouge. Specifications: Overall length: 410mm.Length of blade: 160mm.

These Faithfull HSS Turning Chisel 8mm Spindle Gouge are for use on woodturning lathes. They are manufactured from High-Speed Steel; these chisels will perform well in both hard and soft woods. They maintain a sharp cutting edge much longer than their carbon steel equivalents, requiring less time taken being re-sharpened.They are fitted with full sized contoured walnut handles for user comfort and brass ferrules. They have an 8mm Spindle Gouge used to scoop and cut deep U grooves in spindle turning, and making holes. Specifications: Overall length: 410mm.Length of blade: 160mm.

20mm Roughing Out Gouge.

Size: 16mm Roughing Out Gouge.

The Faithfull Turning Chisel 15mm Round Nose are for use on woodturning lathes. They are manufactured from High-Speed Steel; the chisels will perform well in both hard and soft woods. They maintain a sharp cutting edge much longer than their carbon steel equivalents, requiring less time taken up being re-sharpened.They are fitted with full sized contoured walnut handles for user comfort along with brass ferrules. The Faithfull WCTRNS15 chisel have a 15mm Round Nose Scraper for hollowing out and finishing concave surfaces such as inside a bowl. Specifications: Overall length: 410mm.Length of blade: 160mm.

The Faithfull Turning Chisel 15mm Parting Tool is designed for parting, cutting off a spindle workpiece and for use on woodturning lathes. Manufactured from high-speed steel (HSS), these chisels will perform well in both hard and soft woods. They maintain a sharp cutting edge much longer than their carbon steel equivalents, requiring less time for re-sharpening. The Faithfull chisel's are fitted with full sized contoured walnut wood handles for user comfort along with brass ferrules. Specifications: Overall Length: 410mm.Blade Length: 160mm.

Size: 25mm Plain Skew

Size: 15mm Plain Skew.

The Faithfull turning chisels for use on woodturning lathes. Manufactured from high-speed steel (HSS), these chisels will perform well in both hard and soft woods. They maintain a sharp cutting edge much longer than their carbon steel equivalents, requiring less time being resharpened They are fitted with full sized contoured walnut wood handles for user comfort and brass ferrules. Overall length: 410 mm. Length of blade: 160 mm. Size: 15 mm Diamond Point Scraper for incised line decoration.

The Faithfull 6 Piece Soft Grip Chisel Set is supplied in a hinged wooden storage case. Sizes: 6, 10, 13, 19, 25 and 32mm.

1 x Faithfull Soft Grip Bevel Edge Chisel 6mm (1/4in)

1 x Faithfull Soft Grip Bevel Edge Chisel 38mm (1.1/2in)

1 x Faithfull Soft Grip Bevel Edge Chisel 32mm (1.1/4in)

1 x Faithfull Soft Grip Bevel Edge Chisel 25mm (1in)

1 x Faithfull Soft Grip Bevel Edge Chisel 19mm (3/4in)

1 x Faithfull Soft Grip Bevel Edge Chisel 16mm (5/8in)

1 x Faithfull Soft Grip Bevel Edge Chisel 13mm (1/2in)

1 x Faithfull Soft Grip Bevel Edge Chisel 10mm (3/8in)

This Faithfull WCSET12 is an ideal starter Woodcarving Set of woodcarving chisels containing chisels for the most common woodcarving tasks and is perfect for those wishing to begin woodcarving as a hobby. The WCS12 set is presented in a fine wooden storage case and Faithfull have set out the chisels below for a great and useful helpers guide. Contents:4 x Straight Gouges - 6.3, 9.5, 15.9 and 25.4 mm blade widths.2 x Straight Chisels - 6.3 and 12.7 mm blade widths.2 x V Straight Parting - 9.5 and 12.7 mm blade widths.1 x Spoon Gouge - 19 mm blade width.1 x Spoon Chisel - 19 mm blade width.1 x Curved Gouge - 12.7 mm blade width.1 x Skew Chisel - 12.7 mm blade width. Overall chisel length: 220mm. STRAIGHT GOUGESGouges are designed with a concave blade to remove wood without causing splintering. The depth of the curve or sweep determines the depth-of-cut. The set includes straight gouges with medium sweep. STRAIGHT CHISELSSet includes both straight edge and skew edged styles. Straight edge style is used to smooth out cuts. Skew edge style is ground at a 23-degree angle and are useful for carving in tight corners. V PARTING TOOLSUsed for outlining carving patterns, cutting narrow grooves and corner finishing. SPOON GOUGESpoon shaped bits are useful for detailed concave carving and shaping. SPOON CHISELUsed in place of a straight chisel to reach deeper recesses of the wood. CURVED GOUGEUsed in place of a straight gouge to reach deeper recesses of the wood. Ideal for hollowing out and for concave carving such as the inside curves of bowls. Please Note: Woodcarving chisels will require final sharpening prior to their first use.

Supplied in a plastic hanging case with magnetic storage clip. Size: 6mm (1/4in).

Faithfull Short Blade Butt Chisels are ideal for precise cutting and paring of joints, or for use where access is limited. These chisels feature 110mm long drop-forged chrome vanadium steel blades with accurately ground bevels. Virtually unbreakable soft grip polypropylene handles with steel striking caps. The short length bevel edge blade is ideal for cutting into tight corners. This set contains sizes: 12, 18, 25 32mm.

The Faithfull FAIWCBS3BC set of three blister carded bevel edge chisels have the following dimensions: Sizes: 13, 19, and 25mm (1/2, 3/4 and 1in) Blade Length: 140mm

The Faithfull FAIWCB58 bevel edged chisel is blue and has the following dimensions:Blade width: 16mm (5/8in)Blade Length: 140mm

The Faithfull FAIWCB38 bevel edged chisel is blue and has the following dimensions:Blade Width: 10mm (3/8in)Blade Length: 140mm

The Faithfull FAIWCB34 bevel edged chisel is blue and has the following dimensions:Blade width: 19mm (3/4in)Blade Length: 140mm

The Faithfull FAIWCB2 bevel edged chisel is blue and has the following dimensions:Blade width: 50mm (2in)Blade Length: 165mm

The Faithfull FAIWCB14 bevel edged chisel is blue and has the following dimensions:Blade Width: 6mm (1/4in)Blade Length: 140mm

The Faithfull FAIWCB12 bevel edged chisel is blue and has the following dimensions:Blade width: 13mm (1/2in)Blade length: 140mm

The Faithfull FAIWCB114 bevel edged chisel is blue and has the following dimensions:Blade width: 32mm (1.1/4in)Blade Length: 140mm

The Faithfull FAIWCB112 bevel edged chisel is blue and has the following dimensions:Blade width: 38mm (1.1/2in)Blade Length: 140mm

The Faithfull FAIWCB1 bevel edged chisel is blue and has the following dimensions:Blade width: 25mm (1in)Blade Length: 140mm

These Faithfull Woodcarving chisels have wooden handles, deep seated tangs, brass ferrules and fully polished blades. Please Note: Woodcarving chisels will require final sharpening prior to their first use. The FAIWCARV9 Woodcarving chisel has the following specifications: Type: Spoon Carving Gouge. Blade Width: 19 mm (3/4 inch). Handle: Hardwood. Spoon shaped gouges are used for detailed concave carving and shaping.

The FAIWCARV8 Woodcarving Chisel has the following specifications: Type: V Straight Part Chisel. Blade Width: 9.8mm (3/8in)Handle: Hardwood.

The FAIWCARV7 Woodcarving Chisel has the following specifications: Type: V Straight Part Chisel. Blade Width: 12.7mm (1/2in).Handle: Hardwood.

The FAIWCARV6 Woodcarving Chisel has the following specifications: Type: Straight Chisel. Blade Width: 12.7 mm (1/2 inch). Handle: Hardwood.

The FAIWCARV5 Woodcarving Chisel has the following specifications: Type: Straight Chisel. Blade Width: 6.3 mm (1/4 inch). Handle: Hardwood.

The FAIWCARV4 Woodcarving Chisel has the following specifications: Type: Straight gouge. Size: 25.4 mm (1 inch). Handle: Hardwood.

The FAIWCARV3 Woodcarving Chisel has the following specifications: Type: Straight gouge. Blade Width: 15.9 mm (5/8 inch). Handle: Hardwood.

The FAIWCARV2 Woodcarving Chisel has the following specifications: Type: Straight gouge. Blade Width: 9.5 mm (3/8 inch). Handle: Hardwood.

These Faithfull Woodcarving chisels have wooden handles, deep seated tangs, brass ferrules and fully polished blades. Please Note: Woodcarving chisels will require final sharpening prior to their first use. The FAIWCARV12 Woodcarving chisel has the following specifications: Type: Skew Carving Chisel. Blade Width: 12.7 mm (1/2 inch). Handle: HardwoodUsed for smoothing the surface of a carving to take out any tool marks, ideal for precise paring and detailed finishing especially in corners. Please Note: Woodcarving chisels will require final sharpening prior to their first use.

These Faithfull Woodcarving chisels have wooden handles, deep seated tangs, brass ferrules and fully polished blades. Please Note: Woodcarving chisels will require final sharpening prior to their first use. The FAIWCARV11 Woodcarving chisel has the following specifications: Type: Curved Carving Gouge. Blade Width: 12.7 mm (1/2in). Handle: Hardwood. Curved gouges are used in place of a straight gouge to reach deeper recesses of the wood and are ideal for hollowing out and for concave carving such as the inside of bowls.

These Faithfull Woodcarving chisels have wooden handles, deep seated tangs, brass ferrules and fully polished blades. Please Note: Woodcarving chisels will require final sharpening prior to their first use. The FAIWCARV10 Woodcarving Chisel has the following specifications: Type: Spoon Carving Chisel. Blade Width: 19 mm (3/4 inch). Handle: Hardwood. Spoon shaped chisels are used in place of straight chisels to reach deeper recesses in the wood.

The FAIWCARV1 Woodcarving Chisel has the following specifications: Type: Straight gouge. Blade Width: 6.3 mm (1/4in). Handle: Hardwood.

The Faithfull FAITACKLIFT tack lifter is a useful tool for lifting carpet and upholstery tacks. The V-shaped head is cranked to 45 to the shaft for easy leverage and it is fitted with a soft grip rubber handle for a comfortable grip.

The Faithfull set of two spokeshaves, 1 concave and 1 convex, made with malleable iron bodies. A concave spokeshave is ideal for shaping spindles, oars, chair and table legs. A convex spokeshave is used for recessed work. Cutter Width: 50mm. Length: 240mm.

1 x Faithfull Spokeshave Round

Faithfull replacement Blade for the Faithfull flat and round spokeshaves: FAISSFLAT and FAISSROUND. Cutter Width: 55mm.

1 x Faithfull Spokeshave Flat.

Faithfull replacement blade for convex spokeshaves. Cutter Width: 52mm.

Faithfull replacement blade for a concave spokeshave. Cutter Width: 52mm.

This Faithfull replacement Cabinet Scraper 70mm Blade fits the Faithfull Cabinet Scraper. It helps to produce a precise even finish. Ideal when used to smooth grain on large areas. Specification: Scraper Width: 70mm (2.3/4in).

The Faithfull No.80 cabinet scraper removes fine shavings from wood to give a very smooth finish. Very useful for smoothing knots, burrs, crossed grain and removing old surface finishes on large areas. Unlike an abrasive it does not produce dust which can clog the grain.The 70mm wide, 1.8mm thick blade is held in a fine grey iron cast body with a machined base. The wing handles allow for comfortable use over long periods. The cut can be changed from coarse to fine by turning the thumbscrew which forces the blade to bend slightly and protrude through the scrapers base.The blade can be easily resharpened with a sharpening stone and a burr turned with a burnishing tool.Replacement blade code: FAISCRAPERRB

This Faithfull Blade is a a replacement for the Shoulder Plane. Specification: Width: 27mm (1.1/16in).

The Faithfull Shoulder Bullnose Rebate Plane is a versatile, 3-in-1 low angle plane, combining the functions of: a shoulder plane with the front extension fitted; a bullnose plane using the small nose section; or a chisel plane with the nose removed. The full width blade also allows use as a rebate plane and is easy to set using the knurled adjustment screw.Presented in a hinged wooden storage box.

This Faithfull Replacement Blade is for use with No.778 Rebate Plane.Specification: Width: 38mm (1.1/2in).

This Faithfull FAIPLANEKIT 4-piece kit is the ultimate Plane Woodworking Set collectively made from the finest quality woods, steel and brass Containing:1 x No.4 Plane.1 x 230mm Sliding Bevel.1 x 230mm Try Square.1 x Marking Gauge. The No.4 Plane is designed for smoothing and final finishing. The sliding bevel and try square feature a machined hardwood stock, brass end plates and a blackened spring steel blade. The Faithfull FAIPLANEKIT comes with a 5-year guarantee and is supplied in a wooden presentation case.

The Faithfull planes are designed for end grain work or in any situation where a single-handed operation is required. The low angle cutter and fully adjustable mouth from wide for coarse work to narrow for the fine shaving of awkward grain, make these planes ideal for all types of end grain work. The 60 1/2 block plane with a 35mm cutter width, set at a low angle of 13 1/2 making it particularly effective on end grain and plastic laminates. The 9.1/2 block plane with a 42mm cutter width, set at an angle of 21. Ideal for end grain and general-purpose finishing. The Faithfull FAIPLANEBPS 60 1/2 and 9 1/2 block plane set is presented in a hinged wooden box.

This Faithfull Replacement Blade is for 9.1/2 Planes.Specification: Cutter width: 42mm (1.5/8in).

The Faithfull FAIPLANE912 is a 9.1/2 Block plane seated at 21 with a 42mm cutter width. The planes are designed for end grain work or in any situation where a single-handed operation is required. The low angle cutter and fully adjustable mouth, from wide for coarse work to narrow for the fine shaving of awkward grain, make these planes ideal for all types of end grain work. Presented in a hinged wooden box. Cutter Width: 42mm.Overall Length: 160mm.

This Faithfull Replacement Blade is for both the No.6 and No.7 Planes. Specifications: Width: 60mm (2.5/16in).Thickness: 2.4mm (3/32in).

The Faithfull 778 plane is designed to cut rebates up to 38mm (11/2in) and is guided by an adjustable fence supported on two guide rods. The rods can be pushed through which allows the fence to be used on either side of the plane. A twin position cutter enhances the versatility of this plane. The plane features a quality cast iron body with accurately ground base, two position cutter for rebate and bull nose work, a double sided adjustable fence, a spur for cross grain cutting and is supplied with an accurate depth stop. With the cutter in the centre position, the plane can be used for cutting rebates, and has a fine screw adjuster for precise control of the depth of cut. With the cutter moved to the front position, the plane can also be used for cutting into corners (bullnose work). 5-year guarantee.Presented in a hinged wooden box. Cutter Width: 38mm.Overall Length: 255mm.

The Faithfull No.7 Jointer plane is designed for stock removal and truing long edges or levelling wide boards. The plane features a precision ground base and sides with a traditional hardwood handle and knob for comfort and high quality brass fittings precision machined for accurate adjustment. The plane is suitable for use on both hard and soft woods. Cutter Width: 60mm (2.3/8in).Overall Length: 560mm (22in).

The Faithfull FAIPLANE60RB is a Replacement Blade for the No. 60 1/2 Block Plane.Specification: Width: 35mm (1.3/8in).

This Faithfull No.60 1/2 Block Plane is supplied loose, unboxed.

The Faithfull 60.1/2 Block plane with the plane iron set at 13.5. It is particularly effective on end grain and plastic laminates. Block planes are designed for end grain work or in any situation where a single-handed operation is required. The low angle cutter and fully adjustable mouth, from wide for coarse work to narrow for the fine shaving of awkward grain, make these planes ideal for all types of end grain work. Presented in a hinged wooden box. Overall Length: 160mm.Cutter Width: 35mm.

The Faithfull No.6 Fore plane performs a dual role between stock removal and truing up long edges or levelling wide boards. Made with a quality grey cast iron body for strength and stability with precision ground base and sides for flatness and squareness. Machined seatings eliminate movement and blade judder. A lever cap with a brass locking screw secures the blade assembly and enables easy release for sharpening. Wooden handles and guidance knobs maximise user comfort. A solid brass blade adjustment nut completes the appeal of these traditional tools. Cutter Width: 60mm (2.3/8in).Overall Length: 457mm (18in).

This Faithfull No.5 Bench or 'Jack' Plane has a long base and is used for the initial preparation of rough timber.Made with a quality grey cast iron body for strength and stability with precision ground base, and sides for flatness and squareness. The machined seatings eliminate movement and blade judder. A lever cap with a brass locking screw secures the blade assembly and enables easy release for sharpening. Wooden handles and guidance knobs maximise user comfort. A solid brass blade adjustment nut completes the appeal of these traditional tools.Presented in a fine hinged wooden storage case.The blade will require honing before use.Specifications: Blade width: 50mm (2in).Overall length: 355mm (14in).

This Faithfull Replacement Blade is suitable for No.4 and No.5 Planes. Specifications: Width: 50mm (2in).Thickness: 2.4mm (3/32in).

Service Kit for Faithfull planes, including a blade lever cap and a brass adjuster nut with frog screw.

Front and rear handle kit with bolt and brass nuts for Faithfull No 4 5 planes.

This Faithfull No.4 Smoothing Plane is supplied loose, unboxed.

This Faithfull No.4 Smoothing Plane is presented in a hinged, wooden storage box.

This Faithfull Plane Set is supplied in 2 zip-up canvas carry bags, designed to protect the planes against damage during transport or when in storage. Provides the essentials you need for planing wood: 1 x No.4 Smoothing Plane, designed for smoothing and final finishing. Made with a quality grey cast iron body for strength and stability with precision ground base and sides for flatness and squareness. Machined seatings eliminate movement and blade judder. A lever cap with a brass locking screw secures the blade assembly and enables easy release for sharpening. Wooden handles and guidance knobs maximise user comfort. A solid brass blade adjustment nut completes the appeal of these traditional tools. Cutter Width: 50mm.Overall Length: 250mm. 1 x No.60 1/2 Block Plane has the plane iron set at 13.5. It is particularly effective on end grain and plastic laminates. Block planes are designed for end grain work or in any situation where a single-handed operation is required. The low angle cutter and fully adjustable mouth, from wide for coarse work to narrow for the fine shaving of awkward grain. Cutter Width: 35mm.Overall Length: 160mm.

This Faithfull Plane Set comes in a wooden storage box and provides the essentials you need for planing wood: 1 x No.4 Smoothing Plane, designed for smoothing and final finishing. Made with a quality grey cast iron body for strength and stability with precision ground base and sides for flatness and squareness. Machined seatings eliminate movement and blade judder. A lever cap with a brass locking screw secures the blade assembly and enables easy release for sharpening. Wooden handles and guidance knobs maximise user comfort. A solid brass blade adjustment nut completes the appeal of these traditional tools. Cutter Width: 50mm.Overall Length: 250mm. 1 x No.60 1/2 Block Plane with plane iron set at 13.5. It is particularly effective on end grain and plastic laminates. Block planes are designed for end grain work or in any situation where a single-handed operation is required. The low angle cutter and fully adjustable mouth, from wide for coarse work to narrow for the fine shaving of awkward grain. Cutter Width: 35mm.Overall Length: 160mm.

This Faithfull Replacement Blade is suitable for No.3 Bench Planes. It is suitable for both hard and soft woods. Specification: Width: 45mm (1.3/4in).

The Faithfull No.3 Finishing Plane is ideal for final finishing of cabinet work and general joinery, precision machined for accurate adjustment. Suitable for both hard and soft woods. Made with a quality grey cast iron body for strength and stability with precision ground base and sides for flatness and squareness. Machined seatings eliminate movement and blade judder. A lever cap with a brass locking screw secures the blade assembly and enables easy release for sharpening. Wooden handles and guidance knobs maximise user comfort. A solid brass blade adjustment nut completes the appeal of these traditional tools. Cutter Width: 45mm.Overall Length: 230mm.

This Faithfull Replacement Blade is suitable for the No.10 Rebate Plane (FAIPLANE10). Specification: Width: 55mm (2.1/8in).

The Faithfull traditional No.10 bench rebate plane designed for cleaning up wide rebates and shoulders or large joints and for general bench joinery, where a full width cutter is required. Suitable for use on both hard and soft woods. The high quality grey cast iron body provides both strength and stability, with a precision ground base and sides for flatness and squareness, a machined blade seating eliminates movement and blade judder. The lever cap is fitted with a brass locking screw securing the blade assembly and enables easy release for sharpening. Hardwood handle and knob for user comfort, all parts are precision machined for accurate adjustment. Cutter Width: 50mm (2in).Overall Length: 330mm (13in).

The Faithfull nail puller is the perfect tool for removing nails from most materials, lifting floorboards, opening wooden crates and dismantling wooden structures. This specialist tool can even extract nail heads recessed below surface level and features a malleable cast iron slide handle with a hinged, drop-forged gripping jaw fixed to a box joint for extra strength. The tool is used by positioning the jaws on either side of the nail head before slamming down the slide handle to drive the jaws into the timber and under the nail head. The handle is then levered forwards using the base heel as a leverage point to keep the jaws tight whilst extracting the nail. 60cm - 24-Inch

The Faithfull Set of 5 Mini Tools in a wooden presentation case containing 1 each of the following mini tools: 1 x Woodworking Plane1 x Combination Marking Gauge1 x Sliding Bevel1 x Try Square1 x Dove Tail Square. All made from hardwood and brass fittings to the same exacting standards as their regular sized counterparts.

This Faithfull FAIMBSKIRT mitre box is designed for cutting Taurus and deep skirting boards up to a depth of 230mm. The box will cut accurate internal and external mitres. Maximum Capacity: 230mm.

Faithfull Mitre Box made from high-impact polystyrene plastic. It is ideal for use with a tenon saw when cutting mitred or straight joints. This box features 22.5, 45 and 90 guide slots for multi-angled cuts and a 45 compound cut slot. Two cam locking pegs are included for secure clamping of the workpiece. A bench edge stop on one side of the base prevents movement whilst sawing. Countersunk fastening holes allow the mitre box to be secured to a workbench for extra stability. Specification: Max. Workpiece Depth: 75mmMax. Workpiece Width: 120mmOverall Size: 310 x 170 x 100mm

Box Length: 230mm (9in)Box Width: 115mm (4.1/2in) Capacity

Box Length: 305mm (12in) Box Width: 115mm (4.1/2in) Capacity

Block Length: 230mm (9in) Block width: 64mm (2.1/2in)

Block Length: 300mm (12in) Block Width: 64mm (2.1/2in)

The Faithfull Coving Mitre Box for cutting both internal and external coving up to 127mm. Made from seasoned beech.

The Faithfull Hand Rasp Shaver Tool is suitable for removing material from all types of wood, aluminium, plastics, fibreglass and laminates. It can also be used for plaster and filler removal. The lightweight and strong ABS plastic body features a small head to allow fast stock removal in confined spaces. The durable metal rasp blade clicks into place, making its replacement tool-free and fast. Specification: Blade Size: 60 x 40mmOverall Length: 185mm

The Faithfull Hand Rasp Round File is suitable for removing material from all types of wood, aluminium, plastics, fibreglass and laminates. It can also be used for plaster and filler removal. This cylindrical rasp features an ABS plastic handle plus a thumb grip at the tip for extra control and is ideal for hole enlargement or contour shaving. Specification: Blade Size: 255 x 17mmOverall Length: 400mm

The Faithfull Hand Rasp Plane is suitable for removing material from all types of wood, aluminium, plastics, fibreglass and laminates. It can also be used for plaster and filler removal. The lightweight and strong ABS plastic body is shaped like a plane to allow single or dual handed operation for fast stock removal. The durable metal rasp blade clicks into place, making its replacement tool-free and fast. Specification: Blade Size: 255 x 40mmOverall Length: 270mm

The Faithfull Hand Rasp File is suitable for removing material from all types of wood, aluminium, plastics, fibreglass and laminates. It can also be used for plaster and filler removal. The lightweight and strong ABS plastic body design allows this rasp to be used with a single or dual handed operation for fast stock removal. The durable metal rasp blade clicks into place, making its replacement tool-free and fast. Specification: Blade Size: 140 x 40mmOverall Length: 310mm

Faithfull Replacement Shaver Tool Blade suitable for use with FAIHRSHAVER Hand Rasp Shaver Tool and similar products from other leading brands. Suitable for use on all types of wood, aluminium, plastics, fibreglass and laminates. Can also be used for plaster and filler removal. Specification: Blade Size: 60 x 40mm

Faithfull Replacement Round File Blade for use with FAIHRROUND Round Hand Rasp and similar products from other leading brands. Suitable for use on all types of wood, aluminium, plastics, fibreglass and laminates. Can also be used for plaster and filler removal. Specification: Blade Size: 255 x 17mm

Faithfull Replacement Plane Blade for use with FAIHRPLANE Hand Rasp Plane and similar products from other brands. Suitable for use on all types of wood, aluminium, plastics, fibreglass and laminates. Can also be used for plaster and filler removal. Specification: Blade Size: 255 x 40mm

The Faithfull Hand Rasp Block Plane is suitable for removing material from all types of wood, aluminium, plastics, fibreglass and laminates. It can also be used for plaster and filler removal. The lightweight and strong ABS plastic body is shaped like a block plane for easy single handed operation. The durable metal rasp blade clicks into place, making its replacement tool-free and fast. Specification: Blade Size: 140 x 40mm Overall Length: 155mm

Faithfull Replacement Hand File Block Plane Blade suitable for use with FAIHRFILE Hand Rasp File and FAIHRBLOCK Hand Rasp Block Plane and similar products from other brands. Suitable for use on all types of wood, aluminium, plastics, fibreglass and laminates. Can also be used for plaster and filler removal. Specification: Blade Size: 140 x 40mm

This Faithfull Rasp Set includes: 1 x Hand Rasp Plane is suitable for removing material from all types of wood, aluminium, plastics, fibreglass and laminates. It can also be used for plaster and filler removal. The lightweight and strong ABS plastic body is shaped like a plane to allow single or dual-handed operation for fast stock removal. The durable, metal rasp blade clicks into place, making its replacement tool-free and fast. Specification: Blade Size: 255 x 40mm.Overall Length: 270mm. 1 x Hand Rasp Block Plane is suitable for removing material from all types of wood, aluminium, plastics, fibreglass and laminates. It can also be used for plaster and filler removal. The lightweight and strong ABS plastic body is shaped like a block plane for easy single-handed operation. The durable, metal rasp blade clicks into place, making its replacement tool-free and fast. Specification: Blade Size: 140 x 40mm.Overall Length: 155mm.