The Bessey GH16 Lever Clamp has the following specification: Clamping Force: up to 8,000N.Opening: 160mm.Throat Depth: 80mm.Rail: 16 x 7.5mm.Weight: 0.64kg.

The Bessey GH12 Lever Clamp has the following specification: Clamping Force: up to 8,000N.Opening: 120mm.Throat Depth: 60mm.Rail: 13.5 x 5.6mm.Weight: 0.49kg.

The Bessey EHZ602K has the following: Clamping force of up to 5,000NOpening: 600mmThroat Depth: 100mmRail: 19.5 x 9.5mm

The Bessey EHZ302K has the following: Clamping force of up to 5,000NOpening: 300mmThroat Depth: 100mm Rail: 19.5 x 9.5mm

The Bessey DUO658 has the following: Clamping force up to 1,200NOpening: 650mmThroat Depth: 85mmSpread: 75-685mmF Size: 9-660mmRail: 20 x 5mm Weight: 0.86kg

The Bessey DUO458 has the following: Clamping force up to 1,200NOpening: 450mmThroat Depth: 85mmSpread: 75-535mmF Size: 9-470mmRail: 20 x 5mm Weight: 0.72kg

The Bessey DUO308 has the following: Clamping force up to 1,200NOpening: 300mmThroat Depth: 85mmSpread: 75-380mmF Size: 9-315mmRail: 20 x 5mm Weight: 0.61kg

The Bessey DUO168 has the following: Clamping force up to 1,200NOpening: 160mmThroat Depth: 85mmSpread: 75-235mmF Size: 9-170mmRail: 20 x 5mm Weight: 0.51kg

Set of six replacement angles for BAN 700 band clamp. For strap: 25 mm x 1 mm.Angle range: 60 .

The Band Clamp is suitable for assemblies made of wood, plastics and non-ferrous metals, but it can also be used with ferrous metals when firm, all-round clamping, which will not damage or distort the work is required. Because the tape is tightened evenly from both sides, pressure is uniformly distributed all round or at each corner, thereby preventing distortion on one side. Self locking occurs automatically as the strap is tightened. This ensures consistent tension, which is maintained until the strap is released. The Vario-angle adapt automatically and infinitely variably to any angle from 60 to 180 . Clamping Range Up to 7mBand Width Depth 25mm x 1mmAngle 60 / 80 DegreesWeight: 0.53Kg

Maximum Clamping:- 300 mm Maximum Depth:- 70 mm

Maximum Clamping:- 150 mm Maximum Depth:- 70 mm

Maximum Clamping: 450 mm Maximum Depth: 95 mm

Maximum Clamping: 300 mm Maximum Depth: 95 mm

Maximum Clamping: 150 mm Maximum Depth: 95 mm

This Bahco 420-100-200 F-Clamp has the following specification: Capacity: 200mm (8in)Jaw Length: 100mm (4in)

Size: 152mm (6in)

Size: 102mm (4in)

The BlueSpot Tools One-Handed Ratchet Clamp features a ball socket joint which is attached to a plastic, non marking pad for clamping uneven or angled surfaces and workpieces. To release just push the lever on the back of the handle and pull back the hooked sliding bar.

Visegrip Irwin 11SP Locking C-Clamp Swivel Pad Length: 275mm (11in).Throat Depth: 67mm ( 2 5/8in).Capacity: 102mm (4in).

Length 285mm (11 1/4 in)

The Stanley Heavy-Duty Corner Clamp has an articulating design that allows for pieces of equal or varying thickness to be joined at right angles. Its reversible head design means it can be used as a parallel clamp. The heavy-duty cast zinc construction provides increased durability. Whilst comfort and maximum torque is achieved via the bi-material tri-lobular handle. Mounting holes allow clamp to be securely attached to work surfaces. Specification Throat Depth: 30mm.Clamping Capacity: 57mm.Weight: 1010g.

IRWIN Record Medium-Duty Forged G-Clamp Size: 50mm (2 in).Throat depth:20mm (3/4 in).

Plastic Snow Shovel Head Only

The Vitrex MIXADH140 Mixing Paddle has the following specifications: Blade Diameter: 140mm.Length: 600mm.

The Vitrex MIXADH120 Mixing Paddle has the following specifications: Blade Diameter: 120mm.Length: 600mm.

The Vitrex 80 0100 Laminate Cutter is guaranteed to provide quick and easy cuts for all laminate flooring up to 200mm (8in) wide and 12mm (15/32in) deep. The simple cutting process helps to speed up the installation. Easy to use, the blade speeds accurately through cuts. The V-support ensures the laminate panels are held level and secure during the cut. The long life blade requires no maintenance. Cuts at 90 and produces a clean and professional finish.

1 x Vaughan Bear Claw Scraper Pry Bar 200mm (8in)

1 x Vaughan Bear Claw Scraper Pry Bar 250mm (10in)

1 x Vaughan BC8 Bear Claw Nail Puller 195mm (7.3/4in)

1 x Vaughan BC14 Bear Claw Nail Puller 370mm (14.1/4in)

1 x Vaughan BC12 Bear Claw Nail Puller 300mm (11.3/4in)

1 x Vaughan BC10 Bear Claw Nail Puller 265mm (10.1/2in)

The Vaughan Mini Bar is an indispensable tool for prying, pulling and scraping. With a 'Shepherd's Crook' rocker head for maximum prying power and 3 bevelled nail slots. Ideal for opening paint tins and small leverage jobs. Made in the USA.

1 x Vaughan B215S Stubby SuperBar 305mm (12in)

1 x Vaughan B215L SuperBar 535mm (21in)

The Vaughan B215H This hook bar has a reverse hook to provide excellent leverage and travel capacity. Forged from spring tempered steel, making it ideal for heavy-duty use. With 3 bevelled nail slots and polished, sharp blades for easy insertion. Made in the USA.

1 x Vaughan B215 SuperBar 380mm (15in)

This Trend foot operated Tredlifta Lifter A is used to support the door while fitting into the door frame, it is foot operated freeing up the users hands. It slides under the door, stays flat and stable until ready to activate the lift with the users foot.It will lift 38mm high and hold a maximum weight of 108kg.Made from plastic and non-marring, they have a cam design and internal weight to keep level for ease of use. This lifter is ideal for pinned hinges, they can be carried in a tool belt, there is no need to use a chisel or a bolster. Specifications: Weight: 303g.Lifts to height: 38mm.Maximum door weight: 108kg.Size: 254mm x 44mm x 75mm.

Designed to cut brickwork and concrete, this masons chisel is forged from chrome vanadium steel for increased strength and durability. Blade holds its edge longer and therefore needs less sharpening. Hardened, quenched and tempered to precise specifications for added safety. Modified parabolic striking end for greater resistance to mushrooming and chipping.BI-Material hand guard for increased comfort and protection from over strike. Size: 215 x 45mm (8 1/2 x 1 3/4 in).

Size: 300 x 25mm (12 x 1in).

Used by carpenters, electricians and plumbers for lifting floorboards or channelling recesses in solid floors. The chisel is forged from chrome vanadium steel for increased strength and durability. Blade holds its edge longer and therefore needs less sharpening. Hardened, quenched and tempered to precise specifications for added safety.Modified parabolic striking end for greater resistance to mushrooming and chipping.BI-Material handguard for increased comfort and protection from overstrike.Size: 280 x 75mm (11 x 3 in).

Used by electricians for cutting out patrices, this chisel is forged from chrome vanadium steel for increased strength and durability. Blade holds its edge longer and therefore needs less sharpening. Less grinding equals longer life. Hardened, quenched and tempered to precise specifications for added safety. Modified parabolic striking end for greater resistance to mushrooming and chipping.BI-Material handguard for increased comfort and protection from overstrike.Size: 250 x 57mm (10 x 2 1/4 in).

Stanley FatMax Concrete Chisel forged from chrome vanadium steel for increased strength and durability. The blade holds its edge longer and therefore needs less sharpening. Less grinding equals longer life. Hardened, quenched and tempered to precise specifications for added safety. With a modified parabolic striking end for greater resistance to mushrooming and chipping. Fitted with a bi-material handguard for increased comfort and protection from overstrike. Size: 300 x 19mm (12 x 3/4in).

Size: 100mm (4in).

Size: 75mm (3in).

This Stanley 3-piece Cold Chisel Kit is a top quality set made from chrome vanadium steel for increased strength and durability. For cutting and shaping wrought iron, cast iron, steel, brass, bronze, copper and aluminium, as well as for cutting bolts, nuts and rivets. The 3-piece kit contains 1 of each: 140 x 10mm (5.1/2 x 3/8in), 150 x 13mm (6 x 1/2in) and 170 x 16mm (6.3/4 x 5/8in).

Forged from quality chrome vanadium steel, for increased strength and durability. The brick bolster is used for cutting or shaping bricks and blocks in the construction industry. Quenched and tempered to precise specifications for added safety. Size: 100mm (4in).

Forged from quality chrome vanadium steel, for increased strength and durability. Masons chisels are used for cutting and splitting hard stone, brick and concrete. Quenched and tempered to precise specifications for added safety. Size: 45mm (1.3/4in).

Forged from quality chrome vanadium steel for increased strength and durability for all metalwork tasks from chipping and shaping wrought iron, cast iron, steel, brass, bronze, copper and aluminium to cutting bolts, nuts and rivets. Quenched and tempered to precise specifications for added safety.Size: 300 x 32mm (12 x 1.1/4 in).

Size: 300 x 25mm (12 x 1in).

Size: 200 x 22mm (8 x 7/8in).

Size: 175 x 19mm (6.7/8 x 3/4in).

Size: 170 x 16mm (6.3/4 x 5/8in).

Size: 150 x 13mm (6 x 1/2in).

Size: 140 x 10mm (5.1/2 x 3/8in).

Pin punch Quality chrome vanadium steel increased strength and durability for retained accuracy when marking out centre lines , hole locations and pilot drill starting points. Quenched and tempered to precise specifications. Size: 140 x 10mm (5.1/2 x 3/8in).

The Stanley FatMax Demolition Hammer has a one-piece forged construction with a demolition claw head with a large, knurled, anti-slip strike face. There is also a bevelled nail slot for easy nail pulling. It has a long handle fitted with an ergonomically designed grip for comfort and vibration dampening. It is ideal for prying, pulling and plasterboard grabbing.

The Stanley STHT2-28042 Mixing Paddle is a hexagonal rod that will fit a standard drill and is perfect for mixing compound, paint and other materials. The mixer has wings and a protective extension so they do not come in to contact with the bucket. Specification Length: 400mm.Diameter: 80mm.Maximum Capacity: 10kg.Minimum Capacity: 5kg.

The Stanley Drywall Panel Carrier has a synthetic, light, resistant body that does not damage the board. Allows one person to carry large materials with increased balance and control. The durable plastic handle is angled to keep knuckles away from panels for comfortable, ergonomic lifting. It also has a carefully designed holding notch for efficient blocking of the panel during transport. Helps transport building boards and other flat materials with ease. The 14in handle provides extra reach and visibility while carrying drywall. It's hi-visibility yellow colour makes it easy to locate on the job. Specification Height: 370mm.Width: 165mm.Maximum Capacity: 91kg.

1 x Stanley Wonder Bar Pry Bar 530mm (21in)

The Stanley Tools Super Wonder Bar Pry Bar is made from forged, high-carbon steel for added strength and durability. Polished, bevelled cutting edges with a high-visibility, powder-coated finish. It has an arched centre for swing during nail pulling, no need for an additional wood block. The extended tongue provides added grip and access for hard-to-reach places. Tight radius on bend angle aids in positioning bar. Useful for almost any prying, nail pulling, wood splitting or levering job you are likely to encounter.

1 x Stanley FatMax Spring Steel Wrecking Bar 1060mm (42in)

The Stanley FatMax Spring Steel Wonder Bar is manufactured from lightweight yet durable spring steel. With a high visibility powder coated finish and polished tips. They have wider prying edges for better load spread, and sharpened pointed prying claws for easy access to sunken nails. Specification Length: 380mm (15in)

1 x Stanley Wonder Bar Pry Bar 340mm (13.3/8in)

1 x Stanley FatMax Spring Steel Wrecking Bar 760mm (30in)

1 x Stanley FatMax Spring Steel Wrecking Bar 900mm (36in)

1 x Stanley FatMax Spring Steel Wrecking Bar 600mm (24in)

1 x Stanley Demolition Ripping Bar 700mm (28in)

1 x Stanley Demolition Ripping Bar 610mm (24in)

1 x Stanley FatMax Spring Steel Claw Bar 300mm (12in)

This Stanley FatMax Moulding Bar is manufactured from spring steel for durability with a high visibility powder coated finish and polished tips. With polished bevel claws, one has a wide flat surface to cleanly pry moulding and trim reducing material damage. The non-slip grip provides increased leverage.

1 x Stanley FatMax Spring Steel Claw Bar 250mm (10in)

The Stanley 1-16-069 drywall stripper has twin cutting blades to cut both sides of the drywall, adjustable cutting depth and an easy to grip bi-material handle.

The STANLEY Telescopic Drywall Support has a heavy-duty, ribbed aluminum body which stays flat and rigid. Its adjustable pole provides easier lifting of boards, the efficient clamp holds the board firmly in place. Specification: Height: 1150mm (45.1/4in).

Stanley Metric Drywall T-Square with easy to read black markings and a notched head for cutting a 4in board in 1 sweep.

The Stanley STHT1-05-878 Drywall circle cutter is ideal for cutting perfect holes in drywall up to 16 inches (400mm) in diameter. The cutter is precision calibrated for accuracy and has easy-to-read standard markings. The pin adjusts up and down and easily slides to adjust.

The Stanley STA1-05-868 Wall board carriers have bi-material handles for comfort and protection. This pair of carriers is the ideal device to help make carrying drywall and other boards easier.

1 x Stanley Precision Moulding Pry Bar 250mm (10in)

1 x Stanley Precision Moulding Pry Bar 200mm (8in)

The Stanley Precision Pry Bars are manufactured from forged and tempered high-carbon steel for safety and long life. With polished bevel claws allow for precision nail pulling and prying and the contoured bar makes pulling, prying and lifting easier. They are ideal for heavy-duty demolition work.1 x Stanley Precision Pry Bar Claw 250mm (10in)

The Stanley 100mm (4in) Stainless Steel Joint Knife has a bi-material handle for comfort and protection. Its stainless-steel blade prevents rust and provides durability. The blade has been tapered from handle to tip which provides some flexibility.It comes with a smooth zinc alloy cap for durability and hang hole in handle for easy storage.A PH2 Phillips Bit is included on cap. Specification: Blade Length: 100mm (4in).

The Stanley STA0-16-139 Laminate Trimmer has two spring loaded blades for trimming both sides of edging strip in one sweep. One side cuts straight while the other side can be adjusted for a tapered cut. With threaded metal inserts for repeated adjustments. It is suitable for thin laminates, veneers and edge banding and is spring loaded for adjustable cuts from 1/2-1in.

Stanley Drywall Screw Adaptor Phillips PH2 for quick fixing of drywall screws. It has a steel ring which protects the drywall. Allows easy screwing into drywall frames. Works with any 3/8in or 1/2in drill.

The K120 Stanley Sanding Screen, (10 Pack), is for use with the Stanley 005927 Aluminium Pole Utility Sander. Specifications: Grit: 120.Pack quantity: 10.

The Stanley STA005928 Aluminium Pole Utility Sander with a heavy-duty ribbed aluminium body which stays flat and rigid, and with a bi-material handle. Has an efficient clamp design to hold paper or screen firmly in place; accepts most sandpaper and sanding screens.

The Stanley 0 05 927 Hand Sander has a heavy-duty, ribbed aluminum body that stays flat and rigid. Its efficient clamp design holds paper or screen firmly in place. Fitted with a comfortable, bi-material handle. Accepts most sandpaper and sanding screens.

The Stanley STA0-05-926 Magnetic Drywall Screw Adaptor is for the quick fixing of drywall screws. It is fitted with a steel ring that protects the drywall and makes screwing the drywall into the frames easier. It will work with any 3/8in or 1/2in chuck drill.

1 x Stanley Stainless Steel Taping Knife 200mm (8in)

The Stanley STA005867 Mud pan has a stainless steel pan used for holding plaster which is easy to clean and durable. The design ensures that material will not leak from the pan. This mud pan has the following dimensions:Length in mm: 305mm.Length in inches: 12.

250mm (10in) Stainless Steel Taping Knife

The Super Rod CableQuick Set is the perfect starter kit for anyone routing cables, it comes complete with a few basic attachments. Perfect for installing cable into awkward areas such as cavity walls, under floors and through walls. Super Rods use a highly precise swaging process to produce all of their rods. If you look at the rod end fittings you will see the indents from this process. Unlike crimping, swaging is consistent, ensuring minimum tensile loads are continually achieved. Furthermore, swaging is almost twice as strong as gluing and does not require any chemicals. All components and sets of the Quick family are interchangeable with each other. Please note this is NOT compatible with the Super Rod Pro Sets. Contains the following: 10 x GRP Rods 4mm x 1m1 x Mini Eye1 x Mini Hook1 x Flexi Lead 130 x 4mm

The Cox™ Ultrapoint™ Gun is the original quick loading and powerful pointing gun. The patented catchplate, hardened rod, wear compensation device and precision engineered mechanism ensure this gun is highly durable. The gun uses a rubber plunger between steel plates and a tailor made barrel to ensure clean dispensing. It comes with one black nozzle for pointing brickwork and a slimmer grey nozzle for grouting. Includes a 12 month manufacturers warranty.

Spare kit for the SOLPOINTING mortar pointing and tile grouting gun. Supplied with 3 black nozzles, 1 grey nozzle and 1 barrel.

Spare grouting nozzle for the SOLPOINTING cement and mortar gun. Colour: grey.

Spare pointing nozzle for the SOLPOINTING; cement and mortar gun. Colour: black.

Size 36mm.Length 381mm.

Size 32mm.Length 330mm.

Size 30mm.Length 330mm.

Size 24mm.Length 330mm.