Size 22mm.Length 281mm.

Size 19mm.Length 281mm.

Size 17mm.Length 281mm.

The R.S.T. Drywall Scratcher has a steel construction and is fitted with a soft touch handle for increased user comfort. Used for scratching plaster undercoat making it easier for the new plaster to stick. Blade Size: 150 x 250mm (6 x 10in)

This R.S.T. Hand Sander has a soft touch handle to provide comfort and a secure grip. The abrasive paper is held securely by a metal clamping plate at each end, and its large handle maximises control and efficiency. Size: 9.1/2 x 3.1/4in.

Size: 300mm (12 inch).

Size: 250mm (10 inch).

Size: 200mm (8 inch).

The blade is made from blued steel. Size: 300mm (12 inch).

The blade is made from stainless steel for excellent durability and resistance to corrosion. Size: 250mm (10 inch).

The blade is made from blued steel. Size: 250mm (10 inch).

The blade is made from blued steel. Size: 200mm (8 inch).

This RST drywall board lifter will slide easily under boards and help hold in place while nailing. The raised lip stops the board from slipping. it can also be used for hanging doors. It is manufactured from cast aluminium for strength and durability. Blade: 75mm

This RST6193W is a replacement aluminium handle for the RST Pole Sander part number RTR6193. It allows the user to easily sand ceilings and hard to reach places.It can be extended from 700 to 1220mm (27 to 48in) and then locked via the twist action locking device.

This R.S.T. Soft Touch Pole Sander has a cast aluminium sanding head with an extendable twist-n-lock aluminium handle (70 to 122 cm). A universal joint ensures that the head stays in contact, and it has a 240 x 85 mm plate with foam backing.

This R.S.T. replacement Wooden Handle is suitable for use with the RST6192 Soft Touch Pole Sander. Length: 1200mm (48 inch).

The R.S.T. Pole Sander provides an easy and efficient way of sanding the joints between plasterboards on a ceiling after they have been filled. A swivel head is attached to a wooden pole via a metal thread, and allows easier access into corners. The sander has a soft rubber pad and to keep the the abrasive secured, it has metal clamps. Other poles are available.

Flexible blade. Size: 15.2cm (6 inch).

Flexible blade. Size: 12.7cm (5 inch).

Flexible blade. Size: 10.2cm (4 inch).

Stiff blade. Size: 7.6cm (3 inch).

Flexible blade. Size: 7.6cm (3 inch).

Stiff blade. Size: 5cm (2 inch).

Flexible blade. Size: 5cm (2 inch).

Stiff blade. Size: 3.2cm (1.1/4 inch).

Flexible blade. Size: 3.2cm (1.1/4 inch).

Brick Jointer made from carbon steel and double ended. Used for pointing and keeping a uniform joint when laying bricks. Size. 12mm x 16mm (1/2 x 5/8 in).

Roughneck Solid Fibreglass Handles are not only stronger than conventional wood, but far more durable and require no maintenance. At 900mm (36in) long, they generate significant striking force and are ideal for heavy work. Suitable for use with items ROU64104, ROU64152, ROU64252, ROU64352, ROU64357 and ROU64782.

The Roughneck Asphalt Rake has a heavy-duty, all steel construction with 16 forged flat teeth. Its long tubular steel handle is fitted with a soft grip for increased comfort during prolonged use.

The Roughneck Tarmac Rake has an all steel construction with 16 welded round teeth. Its long tubular steel handle is fitted with a soft grip for increased comfort during prolonged use.

The Roughneck Safety Graft is especially useful for breaking ground and digging in clay or stony ground. It has a solid fibreglass handle, which is strong yet lightweight and an ergonomic soft-feel 'D' grip for comfort. The special curve design of the blade and lip helps to reduce the possibility of damage to underground utilities while digging.

The Roughneck Safety Shovel is designed to reduce the risk of damage to utilities while digging. The shovel has a solid fibreglass handle, which is strong yet lightweight and an ergonomic soft-feel 'D' grip for comfort. The special curve design of the blade and lip helps to reduce the possibility of damage to underground utilities while digging.

The Roughneck Dual-pivot Post Hole Digger has been designed for digging extra deep and narrow holes. Due to the dual-pivoting action, the operation is opposite to traditional post hole diggers as the handles are pushed together to close the jaws. This enables deep narrow holes to be dug resulting in less concrete required to backfill. Offset tubular steel handles with ergonomic soft grips offer increased leverage. Whilst industrial grade, hardened steel blades ensure strength and durability. Specification Bucket: Depth: 270mm (11in), Diameter: 115mm (4.1/2in)Handle Length: 1.50m (59in)

The Roughneck Post Hole Auger offers an easy and quick solution to making narrow and vertical sided holes, which require less concrete to fill. Ideal for making holes for fence posts or signs. Featuring a hardened blade that will cut through most soils and clays and a long tubular T-handle for easy application. Manufactured from heavy gauge metal for extra strength. Specification Thread Diameter: 152mm (6in)Handle Length: 1.08m (42.1/2in)

Roughneck Post Hole Digger for digging post holes and removing debris. Industrial strength steel blades and heavy-duty fibreglass handles provide increased durability and weather resistance. The handles are fitted with special knuckle protector grips. Whilst the long handle length makes digging deep holes easier. Specification Bucket: Depth: 260mm (10.1/4in), Diameter: 135mm (5.3/8in)Handle Length: 1.5m (60in)

The Roughneck Drainage Shovel has a sharpened blade, making it easier to cut into compacted, clay or root ridden ground. Ideal for digging deep narrow trenches for laying drains, pipe and cable channels as well as digging holes for posts and signs. Manufactured from heavy-duty, carbon steel with a corrosion resistant, tumble, lacquered finish. Treads on the blade allow for increased pressure to be applied with reduced risk of slippage. The Power Ring socket, steel reinforced plug, provides stronger blade to handle connection. With a tubular fibreglass shaft and a soft grip D-shape handle for comfort in use. Specification Blade Width: 110mmOverall Length: 1080mm (43in)

The Roughneck Long Handled Drainage Shovel has a sharpened blade making it easier to cut into clay, compacted or root-ridden ground. Ideal for digging deep, narrow trenches for laying drains, pipe and cable channels, as well as digging holes for posts and signs. The long fibreglass handle with contoured grip, offers increased leverage and power, allowing for a more comfortable, upright position to be maintained whilst digging. Built to last, it is manufactured from heavy-duty, carbon steel with a corrosion-resistant, tumble lacquered finish. Treads on the blade allow for increased pressure to be applied with reduced risk of slippage. The Power Ring socket, steel-reinforced plug, provides a stronger blade to handle connection. Specification: Blade Width: 160mmOverall Length: 1460mm (57.1/2in)

The Roughneck Long Handled Trenching Shovel is ideal for digging deep and narrow trenches. The long fibreglass handle with contoured grip, offers increased leverage and power, allowing for a more comfortable, upright position to be maintained whilst digging. Built to last, manufactured from heavy-duty, carbon steel with a corrosion resistant, tumble, lacquered finish. The Power Ring socket, steel reinforced plug, provides stronger blade to handle connection. Specification Blade Width: 100mmOverall Length: 1200mm (57.1/2in)

The Roughneck Square Point Shovel is strong yet lightweight, with a fully hardened pressed steel construction. Treads on the blade allow for increased pressure to be applied with reduced risk of slippage. The Power Ring socket, steel reinforced plug, provides stronger blade to handle connection. It has a fibreglass shaft for reduced overall weight, with a comfortable, double-injected D grip handle. Ideal as a general-purpose shovel for moving sand, gravel, cement, earth and for shovelling out and filling trenches. Specification Blade Width: 215mmOverall Length: 914mm (36in)

This Roughneck Round Shovel has a sharp serrated edge, ideal for digging in compacted ground, slicing through roots and opening bulk bags or bags of cement. Built to last, it is manufactured from heavy-duty, carbon steel with a corrosion-resistant, tumble lacquered finish. With a tubular fibreglass shaft for reduced overall weight and fitted with a soft grip, D-shaped handle for comfort in use. Treads on the blade allow for increased pressure to be applied with reduced risk of slippage. The Power Ring socket, steel-reinforced plug, provides a stronger blade to handle connection. Specification: Blade Width: 225mmOverall Length: 1070mm (42in)

This Roughneck Round Shovel has a sharp serrated edge, ideal for digging in compacted ground, slicing through roots and opening bulk bags or bags of cement. The long fibreglass handle is fitted with a contoured grip, it offers increased leverage and power, allowing for a more comfortable, upright position to be maintained whilst digging. Perfect for deeper holes and trenches. Built to last, it is manufactured from heavy-duty, carbon steel with a corrosion-resistant, tumble lacquered finish. Treads on the blade allow for increased pressure to be applied with reduced risk of slippage. The Power Ring socket, steel-reinforced plug, provides a stronger blade to handle connection. Specification: Blade Width: 225mmOverall Length: 1460mm (57.1/2in)

This Roughneck Mini Shovel has a heavy-duty carbon steel blade with a round point. Perfect for digging and shovelling in confined spaces. Its steel reinforced Power Ring socket offers the strength of much larger shovels with the convenience of a shorter length shaft. With a lightweight, fibreglass shaft with a full-size double-injected D grip handle for comfort in use. Specification Blade Width: 150mmOverall Length: 880mm (34.1/2in)

The Roughneck Micro Fork is ideal for loosening, lifting and turning soil in confined spaces. With a heavy-duty, heat treated tines and a steel reinforced Power Ring socket, offers the strength of much larger shovels with the convenience of a shorter length shaft. The lightweight, fibreglass shaft is fitted a full-size double-injected D grip handle for comfort in use. Specification Blade Width: 150mmOverall Length: 740mm (29in)

This Roughneck Micro Shovel has a heavy-duty carbon steel blade with a square mouth. Perfect for digging and shovelling in confined spaces. Its steel reinforced Power Ring socket offers the strength of much larger shovels with the convenience of a shorter length shaft. With a lightweight, fibreglass shaft with a full-size double-injected D grip handle for comfort in use. Specification Blade Width: 150mmOverall Length: 685mm (27in)

This Roughneck Micro Shovel has a heavy-duty carbon steel blade with a round point. Perfect for digging and shovelling in confined spaces. Its steel reinforced Power Ring socket offers the strength of much larger shovels with the convenience of a shorter length shaft. With a lightweight, fibreglass shaft with a full-size double-injected D grip handle for comfort in use. Specification Blade Width: 150mmOverall Length: 685mm (27in)

The Roughneck Post Rammer has been designed for driving in round or square fence posts.. It has a tubular steel body with reinforced top that features secure welding for safe use and two large handles. It will accommodate posts up to 150mm (6in) in diameter and has a long length for more effective handling. Speicifcation: Max. Post Capacity: 150mm (6in)Length: 710mm (28in)

The Roughneck Small Post Rammer is ideal for driving in angular, tubular and square posts. The heavy gauge tubular steel body accommodates post up to 68mm (2.5/8in) in diameter, and features large handles for safe and secure use. Anti-corrosion powder coated finish. Specification: Max. Post Capacity: 68mm (2.5/8in)Weight: 9.2kg (20lb)

Size: 100mm (4in)

Size: 75mm

Roughneck Slaters Ripper has a black finish with a welded handle and rubber grip. Hardened steel construction for extra strength. Ideal for sliding under slates to pull out or shear fixing nails. Easy to use.

The Roughneck Multi-Purpose Bar Set, contains the following: 2 x Utility bars: 178mm (7in), 381mm (15in)1 x Aligning bar: 610mm (24in)2 x Wrecking bars : 457mm (18in), 305mm (12in)

The Roughneck 64-961 5 Piece Bar Set contains the following; 2 x Utility Bars manufactured from stamped alloy steel that has been hardened and tempered. They have a painted and powder-coated finish with polished tips and an integral nail puller to remove embedded nails. Sizes: 1 x 175mm (7in) and 1 x 380mm (15in). 2 x Wrecking Bars made from drop-forged alloy steel, hardened and tempered, with polished tips and hexagonal shank. The 380mm (15in) bar has an upgraded 5/8in diameter. Sizes: 1 x 300mm (12in) and 1 x 380mm (15in). 1 x Gorilla Bar Junior with a low profile claw that fits further under the workpiece for increased prying power. The wider claw surface offers better control and resists sinking into the support surface. Made from drop-forged alloy steel, hardened and tempered, with polished tips and oval shaped for better control and strength. Size: 356mm (14in).

The Roughneck Toolbox Bar Set contains 4 different bars, which are all drop forged, heat treated and powder coated, will nail removing tips. The Wrecking Bar, Nail Puller and Mini Utility Bar all have polished tips. The Nail Puller is fitted with a soft grip handle for increased comfort. Contents: 1 x Roughneck Wrecking Bar 300mm (12in)1 x Roughneck Nail Puller 230mm (9in)1 x Roughneck Floorboard Puller 250mm (10in)1 x Roughneck Mini Utility Bar 190mm (7.5in)

The Roughneck Replacement Paving Maul Head has a cylindrical shape and is made from high grade rubber. Ideal for laying and levelling paving slabs and kerbing. Replacement head for ROU64780 Paving Maul. Head only - handle NOT supplied.

The Roughneck Paving Maul is fitted with a high density, cylindrical rubber head and 900mm (36in) fibreglass handle. Ideal for bedding heavy-duty slabs.

1 x Roughneck Fencing Maul 6.35kg (14 lb)

1 x Roughneck Fencing Maul 4.53kg (10 lb)

The Roughneck Gorilla Fencing Maul™ is ideal for driving home wooden fence posts. The large round striking face makes it much easier and safer than using a sledge hammer. It has a cast head with double round striking faces. The solid core, high density fibreglass handle is fitted with a polypropylene jacket for shock absorbency. The treble injected TPE soft-grip handle provides added comfort. The handle is fixed by threading through the head and hence offering an extremely strong and permanent fixing.

The Roughneck Pallet Buster is ideal for demolishing all types of pallets. Its basic functions are based on the very popular and best-selling Demolition Lifting Bar but with a number of major improvements. Such as a more convenient head-to-handle angle and a longer handle resulting in the need to bend less for ease of operation. The jaw spacing has been increased to work on Euro pallets as well as incorporating a nail remover. Supplied with a double-injected, soft grip handle for comfortable use.

The Roughneck Roofing Demolition Lifting Bar is ideal when working overhead, such as taking down ceilings, ripping off roof laths and working in confined spaces. The tusks are hardened and tempered and the heel rounded to distribute pressure over a larger area. The side by side chisel ends can be rested on joists for added leverage when removing roof lathes, taking down ceilings and general demolition work. Saves time, energy and increases safety reducing the chance of injury.

The Roughneck Demolition Lifting Bar increases safety, reducing the chance of injury. Ideal for lifting floorboards, removing ceiling boards, breaking pallets, removing roofing laths, lifting heavy objects and all types of demolition work. Also for lifting up large items (e.g slabs) with less risk of items dropping when prising up. The tusks are hardened and tempered and the heel is rounded to distribute pressure over a larger area.

Pack of 10 x Roughneck Fencing Pins 7.5 x 1200mm (48in)

Pack of 5 x Roughneck Fencing Pins 10 x 1300mm (52in)

Pack of 10 x Roughneck Fencing Pins 10 x 1200mm (48in)

The Roughneck Ground Breaking Bar is ideal for use in locations and jobs where a normal crowbar is not sufficient or a pick not accurate enough. This heavy-duty bar is made up of an inner solid crowbar with a chisel tip, drop forged, heat treated and hardened. A weight slides up and down the central bar and exerts blows on the target material. It is ideal for breaking up hard ground, rocks, concrete slabs, asphalt etc. For extra impact, the end stopper can be removed to allow the weight to drop from a greater height.

This Roughneck Warehouse Bar has an L-end for heavy-duty loading and lifting and pointed tip for breaking stone and concrete. With a drop-forged steel construction that has specific heat-treated working areas, and a black finish with polished tips.

This Roughneck Slate Bar has a bent chisel for increased leverage and a pointed tip for breaking stone and concrete. With a drop forged steel construction that has specific heat treated working areas, and a black finish with polished tips.

The Roughneck Telegraph Digger Bar has an extra wide chisel blade designed for heavier breaking and a pointed tip for breaking stone and concrete. The drop forged steel construction has specific heat treated working areas and a black powder coated finish with polished tips.

The Roughneck Post Hole Digger has a long chisel blade and tamper head which make this bar ideal for post hole digging. The drop forged steel construction has specific heat treated working areas and a black powder coated finish with polished tips.

1 x Roughneck Digging Bar 7.5kg 25mm x 183cm

1 x Roughneck Digging Bar 6.2kg 25mm x 152cm

This Roughneck Pinch Point Crowbar has a drop forged steel construction with heat treated working areas, and a black finish with polished tips. They have a pinch point for easier penetration, lifting, digging, breaking, wrecking etc.

The Roughneck Bonsai Claw Bar™ is made from drop-forged alloy steel that has been hardened and tempered. With a painted finish and polished tips. Its low profile claw design means it can easily fit into small spaces. There is also a nail removing head and a heel that can be struck with a hammer.

The Roughneck Bonsai Moulding Bar™ is made from forged alloy steel that has been hardened and tempered. With a painted finish and polished tips. It has an extra wide chisel blade for removing mouldings, architraves, picture rails and skirting boards without damaging the surrounding surface. There is also a nail removing head and a heel that can be struck with a hammer.

Roughneck Gorilla Bonsai Claw Bar with magnetic head for removing embedded nails and light prying. Drop forged and heat treated for exceptional strength and durability. Powder coated finish and polished tips offer greater resistance to corrosion. With bevelled nail removers for prying embedded nails.

Roughneck Gorilla Bonsai Moulding Bar with magnetic head for prying embedded nails and trim from walls. Drop forged and heat treated for exceptional strength and durability, with wide jaws to reduce damage to support when prying. Powder coated finish and polished tips offer greater resistance to corrosion. With bevelled nail removers for prying embedded nails.

1 x Roughneck Gorilla Bar Pro™ 900mm (35in)

1 x Roughneck Gorilla Bar Pro™ 720mm (28in)

1 x Roughneck Gorilla Bar Pro™ 625mm (25in)

1 x Roughneck Gorilla Bar Pro™ 500mm (20in)

1 x Roughneck Gorilla Bar Pro™ 300mm (12in)

The Roughneck Straight Ripping Chisel is manufactured from drop-forged steel that has been hardened and tempered. Its hexagonal shank has a painted finish with polished tips. The integral nail puller can be used to aid the removal of embedded nails. It can also be used as a double handed wrecking chisel where great vertical downward pressure is required.

The Roughneck Gorilla Utility Bar™ is made from hardened and tempered alloy steel with an I section profile which offers much greater strength than traditional flat bars. It incorporates a flat anvil on the neck for striking, 3 integral nail pullers and polished tips. Size: 381mm (15in).

1 x Roughneck Utility Bar 450mm (18in)

1 x Roughneck Utility Bar 380mm (15in)

1 x Roughneck Mini Utility Bar 175mm (7in)

1 x Roughneck Mini Utility Bar 190mm (7in)

The Roughneck Double Ended Nail Puller is manufactured from drop-forged alloy steel, hardened and tempered with a hexagonal shank. With a black painted finish and an integral nail puller to aid the removal of embedded nails.

1 x Roughneck Wrecking Bar T Type 914mm (36in)

1 x Roughneck Wrecking Bar T-Type 610mm (24in)

The Roughneck The Slaters Bench Iron features two sharp spikes for driving into wooden truss or timber, making it an ideal support for slate tiles whilst trimming or punching holes. Manufactured from high carbon steel with a powder coated finish greater corrosion resistance.

The Roughneck Slaters' Ripper is ideal for removing slates without lifting them. The ripper is made from heavy-duty, one-piece solid forged steel, with a black, anti-rust finish. The cranked handle can be struck with a hammer to apply extra force.

1 x Roughneck Chrome Plated Aligning Bar 610mm (24in)

1 x Roughneck Black Aligning Bar 610mm (24in)

The Roughneck Automotive Bar Set contains one rolling head with a round shank and one aligning bar with a hexagonal shank. Both bars are made from one piece of heat-treated steel. They have a black finish with polished double ends. Bevelled edge for easy use. Applications include: automotive, construction, prying, lifting and aligning.

The Roughneck Heavy-Duty Pull Bar is a very well designed and strong tool it has a large flange to rest against the panel and a striking face protected by a nylon cap. Underneath is fully covered by soft felt to protect wood surfaces from scratches, scuffs or other damage. Bevelled end tip to allow prying for either lifting panels or pulling the last row tighter together.

The Roughneck Gorilla Striking Bar™ is an industrial grade, multifunction demolition bar and hammer. It is manufactured from industrial grade steel, with an I-beam shape. It is drop forged, hardened and tempered for strength and is powder coated with polished tips. The striking bar features an extra-long prying claw which allows the bar to be driven deeper underneath a work piece and lift extra heavy boxes or objects. It has an anvil neck which allows hammering the claw in tight places, and its prying claw has a built-in nail puller. Ideal for tough demolition or aligning work.

1 x Roughneck Wrecking Bar 914mm (36in)

1 x Roughneck Wrecking Bar 610mm (24in)

1 x Roughneck Wrecking Bar 450mm (18in)