Size: 200 x 20mm (8 x 3/4 in).

Size: 200 x 13mm (8 x 1/2 in).

Size: 200 x 25mm (8 x 1in).

The Faithfull FAI65LBUCKET has a capacity of 65 litre (14 Gall).

Size: 150 x 6mm (6 x 1/4 in).

Size: 150 x 13mm (6 x 1/2 in).

This Faithfull Mixing Bucket has hundreds of uses around the worksite, home and garden. Fitted with a strong wire handle and plastic carry grip. The bucket has graduated markings in gallons and litres for easy mixing. It can also be used for mixing plaster, Artex and fillers. Specification: Capacity: 25 litre (5 gallon)Internal Diameter (approx.): Bottom 270mm, Top 320mmInternal Height: 410mmColour: White

The Faithfull FAI40LBUCKET has a capacity of 40 litre (9 Galls).

Faithfull heavy-duty yellow bucket with reinforced base for extra durability. Hundreds of uses around the worksite, home and garden. Each bucket is fitted with a strong wire handle and plastic carry grip. Graduated markings in gallons and litres. Internal diameter is approx. 235mm at the bottom and 300mm at the top, the internal height is 260mm.

1 x Faithfull Cold Chisel 457 x 20mm (18 x 3/4in)

1 x Faithfull Cold Chisel 457 x 25mm (18 x 1in)

1 x Faithfull Cold Chisel with Grip 300 x 20mm (12 x 3/4in).

Size: 300 x 20mm (12 x 3/4 in).

Fitted with protective grip. Size: 300 x 25mm (12 x 1 in).

Size: 300 x 13mm (12 x 1/2 in).

Size: 300 x 25mm (12 x 1 in).

Size: 250 x 20mm (10 x 3/4 in).

Size: 250 x 25mm (10 x 1 in).

Size: 100mm x 90m.

The Estwing EPB/18 Pry Bar is lightweight with an incredibly strong, forged I beam construction. With bevelled nail slots and a rocking head to provide maximum leverage. Ideal for carpenters, mechanics and general use.

The Estwing EHB/15 Handy Bar is forged half round for added strength and less weight. It has a wide, thin blade for easy prying. Ideal for carpenters and mechanics.

This Edma Universal Slaters hammer is hand forged with a leather handle. It features a nail puller and has left and right bevels. The hammer has a polished finish. Weight: 650g.

Large slate guillotine which cuts up to 12mm (1/2in) thick natural slates in one easy action. Suitable for cutting natural slate only. Overall length: 840mm (33in).Weight: 8.1kg (18lb).

Edma Straight Vario Laminate / MDF Guillotine is perfect for straight cuts, in length and angled cuts, up to 90 in laminate flooring. It leaves a neat cut without damaging the laminate layer. It doesn't require re-sharpening, no noise and no breathable dust is left behind. Comes with: Protective Felt Pads, 1 x Mini Trestle for long boards, 1 x Waste Collector and 1 x Removable Board Stopper for 210mm cut. Specification Max. Cut: Straight: 320mm, Angled: 210mmMax. Thickness: 15mmWeight: 12.45kg

Laminate/MDF flooring guillotine. Cuts neatly without tearing the laminate layer. No breathable dust. Noise free. Does not need sharpening. Maximum cutting width: 210mm. Maximum cutting thickness: 10mm. Trestle rest for long boards. Includes waste collector.

The Edma Multicoup Extra Universal Cutting Tool also known as mitre shears. With variable angle cuts. Eliminates the need for a mitre box. Fitted with ergonomic, soft grip handles for increased comfort. For use on decorative moulding, wooden skirting boards, rubber seals and PVC section. Specification Length: 240mmWeight: 422g

This carrier allows boards and sheets to be carried by a single person. Sturdy metal construction that has a wide base for better panel seating and an offset handle to help stop catching your knuckles in use. Handle has a plastic grip to prevent slipping.

Master profil single handed setting pliers for use in drywall insulation. Maximum capacity 0.8mm 0.8mm. Quick and efficient punching for the setting of studs and channels. Length 260mm (10 1/4 in). Weight 725g (26oz). Special features: single handed compound action. No screws or anchors needed. Ergonomic design with special soft-grip handle. Replaceable punch. Short handle.

Ergotop Multiprofil Metal Frame Pliers for use in drywall installation. With a special application for right and left setting. Punch process. Universal stud crimping tool, able to work on both sides of the stud. No screws or anchors needed. Ergonomic design, special soft-grip handles. Replaceable punch. Specification Max Capacity: 1mm 1mmJaw Opening: 20mmLength: 310mmWidth: 95mmWeight: 761g

Profil 2 RM Section Setting Pliers are a section setting tool. These metal frame pliers are for quick and efficient punching and setting of rails and studs in drywall insulation. They make it possible to work close to a wall and no screws or anchors are needed. Specification Jaw Opening: 15mmLength: 330mm (13in)Width: 60mm (2.3/8in)

Profil Stud Crimping Tool, also known as section setting pliers. Suitable for stud and track. With a patented punch that means fastening is 60% stronger. Specification Length: 350mm (14in)Capacity: 1 1mm (18 18 gauge); (0.039 0.039in)Weight: 936g (33oz)

Slate and Tinsnip set. The slate cutter features an integral hole punch and will shape slate, eternit, everit and fibre-cement up to 7mm. Cutting length: 35mm (1 3/8) in. Cuts without any dust or crumbling. The compound action aviation snips have long life, non-slip serrated blades - perfect for cutting zinc (even for wire fencing) or PVC. Maximum cutting length: 75mm (3 in).

Heavy-duty roof batten remover with up to 1 tonne resistance, with a soft grip handle.

Guillotine type heavy-duty roof slate tile cutter of 210mm (8.1/4in) capacity. Designed to cut slates up to 7mm (9.3/2in) thick. The frame is fitted with a mounting hook for fixing to lathes or a bench.

Plier type roof slate tile cutter with spring loaded handles. Approx length: 300mm (12 in). Will cut slate up to 7mm (9/32 in) thick.

Repair kit for 0320 and 0310 slate cutters.

Die - only for 0310 and 0320 slate cutters.

Spare universal punch suitable for models: 0310, 0324 and 0335 slate cutters.

35 mm blade - only for 0310 and 0320 slate cutters.

Plier action roof slate tile cutter with spring loaded handles. This model also has a slate hole punch which operates by closing the handles. Approx length: 300 mm /12in. Features: Replaceable blade and punch. Punch diameter: 3.2 mm (1/8in). Cutting length: 35 mm per single pressure. Cutting width: 2.8 mm (0.109in).

1 x DEWALT Replacement Skimmer Blade 48in for 2-948.

1 x DEWALT Replacement Skimmer Blade 40in for 2-940.

1 x DEWALT Replacement Skimmer Blade 32in for 2-932.

1 x DEWALT Replacement Skimmer Blade 24in for 2-924.

1 x DEWALT Replacement Skimmer Blade 16in for 2-916.

1 x DEWALT Replacement Skimmer Blade 10in for 2-910.

1 x DEWALT Replacement Skimmer Blade 14in for 2-914.

1 x DEWALT Replacement Skimmer Blade 7in for 2-907.

1 x DEWALT Skimmer 48in.

1 x DEWALT Skimmer Telescopic Pole 21-32in

1 x DEWALT Skimmer Telescopic Pole 48-87in

1 x DEWALT Skimmer Telescopic Pole 37-63in.

The DEWALT Skimmer Adaptor can be used to attach an extendable handle to the DEWALT Skimmer. Made from high-strength, glass-filled composite for increased durability. Fitted with quick-release tabs for rapid handle changes and an adjustment screw for changing the handle angle.

1 x DEWALT Skimmer 40in.

1 x DEWALT Skimmer 32in.

1 x DEWALT Skimmer 24in.

1 x DEWALT Skimmer 16in.

1 x DEWALT Skimmer 14in.

1 x DEWALT Skimmer 10in.

1 x DEWALT Skimmer 7in.

1 x DEWALT Stainless Steel Jointing/Filling Knife 250mm (10in).

1 x DEWALT Stainless Steel Jointing/Filling Knife 200mm (8in).

1 x DEWALT Stainless Steel Jointing/Filling Knife 150mm (6in).

1 x DEWALT Stainless Steel Jointing/Filling Knife 125mm (5in).

1 x DEWALT Stainless Steel Jointing/Filling Knife 100mm (4in).

1 x DEWALT Stainless Steel Jointing/Filling Knife 75mm (3in).

The DEWALT Mixer Adaptor is made from heavy-duty, plated carbon steel. It adapts a Hex shaft to a threaded attachment. Fits any size Hex shaft mixer. Supplied with a Hex key.

The DEWALT Pro Mixing Paddle has a unique design that reduces drag and wear on a power drill by 20%. It also enables splatter-free operation by pulling material down into the centre of the mixer head, versus throwing it against the bucket. This mixing action virtually eliminates the introduction of air bubbles. Made from durable carbon steel that has been plated for corrosion protection and easy clean-up. Fitted with a universal mixing attachment. Ideal for drywall joint compound, grout, plaster, paint etc. Specification: Shaft: 1/2inLength: 812mm (32in)Mixing Head: 177mm (7in)

1 x DEWALT Jointing/Filling Knife 150mm (6in).

1 x DEWALT Jointing/Filling Knife 125mm (5in).

1 x DEWALT Jointing/Filling Knife 100mm (4in).

1 x DEWALT Hammer End Jointing/Filling Knife 250mm (10in).

1 x DEWALT Hammer End Jointing/Filling Knife 200mm (8in).

1 x DEWALT Hammer End Jointing/Filling Knife 150mm (6in).

1 x DEWALT Hammer End Jointing/Filling Knife 125mm (5in).

1 x DEWALT Hammer End Jointing/Filling Knife 100mm (4in).

1 x DEWALT Hammer End Jointing/Filling Knife 75mm (3in).

1 x DEWALT Soft Grip Taping Knife 355mm (14in).

1 x DEWALT Soft Grip Taping Knife 300mm (12in).

1 x DEWALT Soft Grip Taping Knife 250mm (10in).

1 x DEWALT Soft Grip Taping Knife 200mm (8in).

Size: 69 litre (15 gal).Diameter: 550mm (22 in)Height: 420mm (16 1/2 in)

Size: 39 litre (8.5 gal)

Concept Pointing / Grouting Gun 210018 is ideal for pointing and grouting jobs, providing a quick, clean solution. The tool is supplied with two tubes, two pointing nozzles, two grouting nozzles, mixing paddle and pointing tool for continuous working and longer life. This is an essential tool for anyone laying bricks, flags, tiles etc. All concept applicator guns are thoroughly mechanically tested and CE rated. The thrust ratios are market leading and the tools are manufactured for trade professional use.

The Bulldog Square Punner (tamper) has a one piece head design and a large, square, solid-cast head. The handle is made from tubular steel. It is ideal for finishing work on asphalt surface, to tamp up close to walls and corners where mechanical rollers leave ridges or cannot get access. Part of Bulldog's Premier Agricultural Tool range, manufactured to the highest possible specification to guarantee quality. Made In Britain.

The Bulldog Snow Shovel is the perfect tool for scooping up snow in winter and leaves in autumn. It has a strong, plastic D-handle and a lightweight aluminium shaft with soft grip, to ensure comfort even in cold weather. The wide, tough plastic moulded blade features a metal edge for breaking and scraping ice. Specification: Length (Handle to Blade Tip): 135cmBlade Size: 31.5 x 45.5cmScoop Depth: 12cm

The Bulldog Posthole Digger is the ideal tool for digging postholes. It has a scissor-like action, which enables the user to scoop up the soil, allowing it to be removed without making a mess. Fitted with 1.2m wooden handles for increased leverage, reducing any strain on the back. Specification: Overall Length: 1.2m (47in)

The Bulldog PD1 Posthole Driver is made from tubular steel and is ideal for driving posts into heavy ground. Can be used with round or square posts. Fitted with 2 handles and a solid metal end plug. Width: 140mm (5.5in)Length: 600mm (23.5in)

The Bulldog Mini Square Mouth Shovel is the ideal tool for digging in small confined areas. With its fibreglass shaft, it is lightweight and easy to transport around. Full sized D-handle with soft grip and treaded blade allow for comfortable use.

The Bulldog Mini Round Mouth Shovel is the ideal tool for digging in small confined areas. With its fibreglass shaft, it is lightweight and easy to transport around. The full sized D-handle with soft grip, together with the treaded blade, allow for comfortable use.

1 x Bulldog FM14 Fibreglass Handle Fencing Maul 6.35kg (14 lb)

1 x Bulldog FM12 Fibreglass Handle Fencing Maul 5.45kg (12 lb).

A heavy-duty, all-steel solid forged trenching shovel which is ideal for digging narrow trenches when laying cables or pipes. It has a metal YD handle with a wooden cross dowel for comfort. Size: No.2.Blade: 190 x 280mm

Bulldog's Standard range of tools are designed with the usual attention to detail and strength, but lower in price than other ranges. This taper mouth shovel is forged from one piece of steel to give maximum strength. It has an unvarnished hardwood shaft, which is strong and durable, and a T handle. Its taper blade makes breaking into aggregate easier every time. It is ideal for shovelling out or back filling trenches. The BUL5TM2T has the following specifications:Head size number: 2Head dimensions: 315 x 250mm (12.1/2 x 10in)Handle length: 711mm (28in)

Bulldog Taper Mouth Shovel 5TM2MYD This solid forged, taper mouth shovel is ideal for trench work, concrete mixing and general shovelling. It has an unvarnished hardwood handle with a metal YD with a wooden cross dowel for added comfort. The shovel is solid forged from one piece of steel to give maximum strength and the taper blade makes breaking into aggregate easy. Size: No.2.Blade: 315 x 250mm (12.5 x 10in).Handle length 28in (711mm)Made with American German FSC AshForged in Britain

This Bulldog heavy-duty all steel taper mouth contractors shovel.has a solid forged blade and socket correctly tempered for strength.It has a metal YD handle with wooden cross dowel. Size: No.2.Blade: 310 x 250mm (12 x 10in).Shaft length: 711mm (28in)Weight: 2.78kg

This Insulated Trench Fork from Bulldog's Premier range has solid forged managanese steel head and socket. It has a 711mm solid fibreglass shaft and a rubber collar to protect and insulate your hand. It is the ideal tool for breaking up hard and compacted lumps and hard ground. Each tool is tested to 10,000 volts and guaranteed to 1,000 volts.Features:Insulated 'Wear' Collar.Tested to 10,000 Volts.Guaranteed to 1,000 Volts.Individually Certificated.Forged in Britain.Size of head: 310 x 210mm (12.1/4in x 8.1/4in).Handle length: 711mm (28in).

Bulldog 5TFAM Trenching Fork Metal MYD.This Bulldog All Metal Trench Fork is solid forged entirely out of one piece of steel, which increases its strength and durability. This fork has a wooden 'YD' shaped handle. This fork is made up of 4 prongs, which are slightly thicker than the standard fork, giving it extra strength. Head: 310 x 210mm (12 x 8.1/4in).Shaft length: 711mm (28 inch)Weight: 2.5kg

Bulldog's Standard range of tools are designed with the usual attention to detail and strength, but lower in price than other ranges. This square mouth shovel is forged from one piece of steel to give maximum strength. It has an unvarnished hardwood shaft, which is strong and durable, and a T-shaped handle. Its square shaped blade enables the shovel to take a maximum load every time. Ideal for shovelling sand, snow etc. The BUL5SM2T has the following specifications:Head size number: 2Head dimensions: 315 x 250mm (12.1/2 x 10in)Handle length: 711mm (28in)

This Bulldog solid forged, square mouth shovel is ideal for concrete mixing, and general shovelling. It has an unvarnished ash shaft with a metal YD grip. Size: No 2. Blade: 320 x 250mm (12.3/4 x 10in).