Bulldog All-Steel Square Shovel No.2 5SM2AM. No2 shovel with solid forged head and all metal shaft which will not rot. It as a YD shaped handle. The square shaped blade enables the shovel to take a maximum load every time. Blade length: 315mmBlade width: 250mmHandle length: 711mmOverall length: 1020mm

Bulldog 5RM2T Solid Socket Shovel. This shovel has a round mouth and 28 inch T shaped ash handle. The blade is No 2 size. Shaft Length: 28in (711mm)Head Length: 315mmHead Width: 250mm

This solid forged Newcastle draining shovel is ideal for digging holes, deep narrow trenches, cable, pipe and drain channels or post holes. It has a solid forged blade, steel shaft and metal YD hilt with wooden cross piece for added comfort. Blade: 400 x 180mm (16 x 7in).

This Bulldog all-steel grafting tool has a dished blade and a curved cutting edge which makes it ideal for clay digging and heavy ground breaking work. It has a forged blade, steel shaft and metal YD grip with wooden cross piece for added comfort. All metal constructionHandle length 28in (711mm)Metal 'D' gripForged In BritainHead size 12.5in x 6.5in (320 x 165mm)

Bulldog's Standard range of tools are designed with the usual attention to detail and strength, but lower in price than other ranges. This cable laying shovel is forged from one piece of steel to give maximum strength. It has an unvarnished hardwood shaft, which is strong and durable and metal YD grip with a wooden cross dowel for added comfort. The slightly dished blade and rounded cutting edges make it ideal for digging narrow trenches in clay and similar materials. The BUL5CLMYD has the following specifications:Head size dimensions: 280 x 114mm (11 x 4.1/2in)Handle length: 711mm (28in).

Bulldog's Standard range of tools are designed with the usual attention to detail and strength, but lower in price than other ranges. This cable laying shovel is forged from one piece of steel to give maximum strength. It has an all-metal construction, and a YD grip with a wooden cross dowel for added comfort. The narrow blade desing allows this tool to dig cable trenches without taking too much material. Its slightly dished blade and rounded cutting edges make it ideal for digging narrow trenches in clay and similar materials. Blade: 280 x 125mm (11 x 5in).Handle length: 711mm (28in).

Square mouth shovel used for shovelling out or backfilling trenches, concrete mixing, working tarmac and moving sand, cement and chippings etc… Size: 000Width: 8inHardwood shaft: 28in.T handle.

Square mouth shovel used for shovelling out or backfilling trenches, concrete mixing, working tarmac and moving sand, cement and chippings etc… Size: 000.Width: 8in.Hardwood shaft: 28in.MYD handle.

Bulldog's Standard range of tools are designed with the usual attention to detail and strength, but lower in price than other ranges. This square mouth open socket shovel has a steel blade (size 2). It is light in weight, which makes it ideal for shovelling sand and aggregates. Its shaft is made from unlacquered American and German FSC ash wood and it has a T style handle. Forged in Britain.Size: No.2.Head size: 315 x 250mm (12.1/2 x 10in).Handle length: 711mm (28in).

Ash Handle with Plastic 'D' Grip. Is an ideal tool for shoveling out or backfilling trenches, concrete mixing, working tarmac and moving cement chippings etc. With an unvarnished hardwood shaft for strength and durability. The Standard Contractor range is designed with the usual Bulldog attention to detail but aimed at the budget-conscious contractor. Size: No.2. Blade: 315 x 250mm.

West Country round mouthed open socket shovel from Bulldog's Premier range. It has its origin in specific areas where long ash shafts are preferred because of the extra leverage they generate. The timber used for the handle and shaft has a very low moisture content to avoid shrinkage or splitting. The open socket blade is hardened and tempered, so it can be used for light digging as well as for moving loose materials such as shingle, sand and gravel. West country patternLong straight ash handle 54in (1372mm)Made with American German FSC AshMade In BritainHead size 11.5in x 10.5in (290 x 265mm)

This Bulldog 'Premier' Square Mouth Shovel is made from a unique specification steel, resulting in an exceptionally strong, flexible tool head to absorb the shock and pressure of hard work without distorting or breaking. The shovel has an inherent stiffness, resulting from superior forging, which is less prone to fatigue. The shovel has an open socket, which is an integral part of the lightweight blade. It is ideal for shovelling sand, snow etcThe BUL22132T Square Shovel has the following specifications:Blade size number: 6Blade dimensions: 370 x 305mm (14.1/2 x 12in)Ash Handle with T Grip Handle length: 711mm (28in)

BUL1711 Manure Fork 4 Prong 1200mm (48in) Handle. This strong, hard-wearing and well balanced fork is perfect for manure moving tasks.It has a lightweight ash shaft and four sharp steel prongs that penetrate easily. The head is perfectly angled for loading.4 Steel prongsHandle length 48" (1219mm)Made with American German FSC Ash

Replacement Blade for 1190 Floor Scraper made from blued steel fabrication. With pre drilled holes. Can be fitted using wing nuts. Head Width: 203mm

This Bulldog Floor Scraper has a flexible blade made from hardened spring steel, and tubular steel handle. It is perfect for cleaning the floors of barns, garages and patios, and will clear debris and rubbish with ease. It is ideal for removing oil or compacted material, such as mud. Blades can be replaced. (BUL1191)Handle length: 1220mm (48in)Head width: 203mm (8in)

Size: 27mm.Length: 250mm.

Size: 24mm.Length: 200mm.

The Broadfix Precision Wedges are ideal for shimming in pairs for ultra precise incremental adjustment. They have been manufactured with a high percentage of post-industrial and post-consumer recycled material. As they are made from plastic they will not swell, shrink or rot and they are completely waterproof. Capable of withstanding higher compressive loads than traditional timber flat packers. This also makes them more economical. They are colour coded depending on size, for easy identification. Wedge shaped shim with a distinctive serrated design which allows a pair of them to achieve a precise, level, non-slip thickness. The slot allows 2 of them to be placed around the fixing, facing each other, and then adjusted to the desired thickness. Size: 78 x 45mm.Number of Pieces: 100.

The Broadfix Standard U-Shims come in a mix of thicknesses and are supplied in a handy clam shell pack for easy storage. Has the following specification: Size: 101 x 43mm.Thickness: 1, 3, 5 and 6mm - colour codedNumber of Pieces: 60.

The Broadfix Small U-Shims come in a mix of thicknesses and are supplied in a handy clam shell pack for easy storage. Has the following specification: Size: 55 x 43mm.Thickness: 1, 3, 5 and 6mm - colour codedNumber of Pieces: 100.

Broadfix U-Shim Mixed Set is supplied in a robust tub, that can be refilled with the bagged range once you run low. Contains the following: 210 x Small U-Shims 55 x 43mm90 x Standard U-Shims 101 x 43mm Various thicknesses: 1, 3, 5, 6 and 10mm - colour coded

Broadfix U-Shims Mixed Bag contains the following: 140 x Small U-Shims 55 x 43mm60 x Standard U-Shims 101 x 143mm Various thicknesses: 1, 3, 5, 6 and 10mm - colour coded

The Broadfix Flat Packers Mixed Set supplied in a handy clam shell pack for easy storage. Has the following specification: Size: 100 x 28mm, Thickness: 1-6mm.Number of Pieces: 60.

This Broadfix Flat Packers Mixed Set is supplied in a robust tub, that can be refilled with the bagged range once you run low. Has the following specification: Size: 100 x 28mm, Thickness: 1-6mm.Number of Pieces: 300.

The Broadfix Flat Packers Mixed Bag has the following specification: Size: 100 x 28mm, Thickness: 1-6mm.Number of Pieces: 120 Pieces Total (20 each of 1-6mm).

The Broadfix Levelling Shims have been manufactured with a high percentage of post-industrial and post-consumer recycled material. As they are made from plastic they will not swell, shrink or rot and they are completely waterproof. Capable of withstanding higher compressive loads than traditional timber levelling shims. This also makes them more economical. They are colour coded depending on size, for easy identification. This Broadfix Levelling Shim Mixed Set contains four of the most popular shim styles: 30 x Standard U Shims 101 x 43mm.70 x Small U Shims 55 x 43mm.15 x Precision Wedge Shim 78 x 45mm.45 x Flat Packers 100 x 28mm.

The Bessey SVH400 is ideal for floor coverings such as wood and cork parquet, laminated and panel flooring, which are stylish and fashionable. BESSEY has developed a range of specialist clamping tools that make the laying of these sought after floor coverings easier and more efficient. For laying parquet, laminated and panel flooring. Length: 4.0mBand size: 25mm x 1mmJaw Width : 120mm

The Bessey AV2 Spacer is designed for laying parquet, laminated and panel flooring without any wedges. Spacer for floating laminate and parquet flooring installations.Wide contact and support area for avoiding pressure points on thefloorboards and plaster.Easy to remove by simply turning back.Very light and compact. Features: 1 Clever dial Set up is fast and simple. Inserted between the wall and the first row of flooring, the distance to the wall can be set simply by turning the red dial. When the installation work is finished, the spacer is easy to remove; just rotate the dial to release the pressure.2 Wide contact and support surface - Simply put, the pressure points on the wall and the flooring are avoided. There is no danger of the aid slipping or tilting - as can happen with wedges or blocks - when working with the BESSEY spacer.3 Exact millimetre scale. Wall surface irregularities of 5 to 20 mm can be compensated for easily. The exact distance required for spacing can be readily seen on the millimetre scale.4 'Robust' in the size of a business card. Manufactured from impact and break resistant, glass fibre reinforced polyamide, the spacer is light and tough and should last for years. Spacer AV2. Each pack contains 4 spacers.

This Bahco Pry Bar features both a crowfoot and wide end, both of which are useful for demolition work. Its short length makes it ideal for use in tight spaces. The bright orange finish is easy to spot on site.

This Bahco Pry Bar features both a crowfoot and precise end, both of which are useful for demolition work. Its short length makes it ideal for use in tight spaces. The bright orange finish is easy to spot on site.

1 x Bahco Multi-Position Crowbar with V-Claw Head 360mm

1 x Bahco Multi-Position Crowbar with V-Claw Head 260mm

The BlueSpot 60008 10 Piece 1m Cable Access Kit is specially designed to gain access to wire and cables underneath floorboards, ceiling ducts, trunks, and wall cavities.It has reinforced polyester rods for increased durability and strength. Includes flexy extender, ring end for pushing and hook end for pulling.Specification: Length: 1m.

Actual size of 1700 x 1110mm (67 x 44 in)

Size: 100mm (4in).

Size: 57mm (2.1/4in).

The R.S.T. Multi Mixer is suitable for mixing paint, adhesives and fillers. It has a 100mm (4in) diameter blade and fits most chuck sizes. For use with power drills.

The Roughneck Square Shovel is ideal for scooping, levelling out, filling trenches and mixing cement. The long fibreglass handle with contoured grip, offers increased leverage and power, allowing for a more comfortable, upright position to be maintained whilst digging. Perfect for deeper holes and trenches. Built to last, it is manufactured from heavy-duty, carbon steel with a corrosion-resistant, tumble lacquered finish. Treads on the blade allow for increased pressure to be applied with reduced risk of slippage. The Power Ring socket, steel-reinforced plug, provides a stronger blade to handle connection. Specification: Blade Width: 225mmOverall Length: 1460mm (57.1/2in)

1 x Roughneck Gorilla Bar 914mm (36in)

1 x Roughneck Gorilla Bar 610mm (24in)

This Roughneck BIG MUTT Multi-purpose Scraper has a long wooden handle. Its heat treated roll forged steel blade has a bevelled cutting edge for durability and clean cutting. With a polished tip for easy cleaning. The blade can be re-sharpened to maintain its cutting edge. Specification Blade Size: 225 x 175mm (9 x 7in)Overall Handle Length: 1640mm (64.1/2in)

This Roughneck MUTT Multi-purpose Scraper has a wooden shaft fitted with a D grip handle. Its heat treated roll forged steel blade has a bevelled cutting edge for durability and clean cutting. With a polished tip for easy cleaning. The blade can be re-sharpened to maintain its cutting edge. Specification Blade Size: 200 x 100mm (8 x 4in)Overall Handle Length: 1000mm (39in)

Blade 300mm (12 in). Long handle.

Blade: 200mm (8 in).

Roughneck Cold Chisel 3 Piece Set, made from drop-forged steel, heat-treated and tempered. Have a black powder-coated finish. This 3 Piece Set Contains:1 x 200 x 16mm (8 x 5/8in). 1 x 250 x 19mm (10 x 3/4in).1 x 300 x 25mm (12 x 11in).

Roughneck 3 Piece Chisel and Bolster Set made from drop-forged steel, heat-treated and tempered. Each piece has a black powder-coated finish and a dual-component soft grip with safety guard. Set contains: 1 x Cold Chisel 25 x 254mm (1 x 10in)1 x Brick Bolster 70 x 216mm (2.3/4 x 8.1/2in)1 x Electrician's Bolster 76 x 254mm (3 x 10in)

The IK HC 1.5 Sprayer is manufactured from highly resistant materials and can be used with: animal and vegetable oils, hydrocarbon-based solvents, lubricants and petroleum products. Ideal for a wide variety of applications: brake cleaning, tar removal from vehicle bodies and tools, machinery and motor cleaning, lubricant application, cleaning of car interiors, degreasing, wood treatments, waterproofing and de-waxing fluids etc. Important: NOT suitable for spraying acid agents or strong alkalines.

The Marshalltown MDR-389 Drywall Rasp has a stainless steel blade that works in both directions. Fitted with guide rails and a DuraSoft handle for comfort. Specification Size: 140mm (5.1/2in).

1 x Hultafors 207 Steel Pinch Bar 500mm (20in)

1 x Hultafors 207 Steel Pinch Bar 400mm (16in)

This Large Gorilla Tub has the following specifications: Capacity: 38 litre.Dimensions: Height: 33cm. Diameter: 45cm.Colour: Blue. Common uses:Horse feed, plant pot, toy storage, general household storage, laundry basket etc.

The GORTUB42 Gorilla Tub Large Size 38 litre (9 gal) has the following specification: Height: 32cm.Diameter: 45cm.Colour: Yellow.

1 x Red Gorilla One-Piece Gorilla Shovel™ Yellow

1 x Red Gorilla One-Piece Gorilla Shovel™ Red

1 x Red Gorilla One-Piece Gorilla Shovel™ Blue

This Faithfull Tarpaulin has the following specification: Colour: Green / SilverSize: 5.4 x 3.6m (18 x 12ft)Fabric Weight: 80gsm

This Faithfull Tarpaulin has the following specification: Colour: Green / SilverSize: 3.6 x 2.7m (12 x 9ft)Fabric Weight: 80gsm

1 x Faithfull Open Socket Square Shovel No.2 T Handle

1 x Faithfull Open Socket Shovel Square No.2 PYD

The Faithfull FAIHDRS heavy-duty roofing scraper with a 175mm (7 inch) wide one-piece solid steel forged blade and a 1.4m (54 inch) wooden handle. The scraper can be re-sharpened with a hand file. The Faithfull FAIHDRS weighs 2.25kg and is ideal for heavy-duty scraping including roofing felt removal, chopping, paint removal and digging or cutting tree roots.

The FAIFSHD8B Floor Scraper Blade has the following specifications: Suits floor scraper: Faithfull FAIFS. Blade size: 200mm (8 inch). Number of holes: 4.

Fibreglass handle: 1450 x 25mm (57in x 1 in) Blade size: 300mm (12in)

Fibreglass handle: 1450 x 25mm (57 x 1 in) Blade size: 200mm (8in)

1 x Faithfull Yellow Flex Tub 42 litre

1 x Faithfull Green Flex Tub 42 litre.

Faithfull general-purpose bucket with hundreds of uses around the worksite, home and garden. Fitted with a strong wire handle and plastic carry grip. Standard-duty black builder's bucket manufactured using recycled materials. Graduated markings in gallons and litres. Internal diameter is approx. 235mm at the bottom and 300mm at the top, the internal height is 260mm.

Size: 48mm x 90m.

Denso Dry Lining Tape is a super strong, flexibe plasterboard jointing tape for taping and reinforcing dry wall joints and repairing cracks or holes in plasterboard walls and ceilings. For quick and easy application, the tape requires no pre-plastering and is self-adhesive. Tape dimensions: Width: 50mm. Length: 90m.

Actual size 2600 x 1650mm (102 x 66in)

What do you do with your cutting tools when you are not actually using them? The MARTOR BELT HOLSTER S is a robust holder that allows you to carry all compact MARTOR knives as well as our safey scissors at all times. In addition, the compartments are designed to allow you to load different tools: for example you can also carry a pen or a pack of blades. The MARTOR BELT HOLSTER is the ideal place to stow your tools safely when moving from A to B - and have them at hand, as soon as they are required.

2-sided grinding
4-way usable blade
Industrial blade rounded

Automatic blade retraction ensures high safety
As soon as you start cutting, release the slider - so the blade immediately disappears back into the handle after cutting
Suitable for right and left handers
Blade change button enables tool-free blade change

These MARTOR safety knife blades are designed specifically for MARTOR SECUMAX 350 safety knives. Easy to install, they have two different cutting edges that can be used, making them last much longer than standard safety knife blades.

The SECUMAX 350 SE is our sustainable all-rounder. The black handle is made of 98% recycled plastic. The interchangeable 2-in1 blade head also gives the knife an extended service life. It cuts all common materials from film and plastic strapping band through to 2-ply cardboard. The concealed blade protects users as well as packaged goods. It can also easily split adhesive tape.

The SECUMAX 350 is a combination of versatility, comfort and safety. A maximum degree of safety. Featuring an innovative blade change, this knife is multi-talented. It can be used to cut all standard materials, from film to plastic-strapping, from paper to 2-ply cardboard. It splits adhesive tape easily too. And it is so comfortable to hold that you won't want to put it down.

The SECUMAX 150 resolves several issues in one. With its concealed blade, you will never have to worry about injuring yourself or damaging your goods. Thanks to its versatility, you only need the one tool to cut, scrape and split. And with its 24 grams and ergonomic design, the SECUMAX 150 won't weigh you down with fatigue after a day of cutting. In short: it is the cutting tool you have been waiting for.

Fantastically ergonomic, this MARTOR safety knife has a soft-grip handle, easy to activate trigger lever, and a robust aluminium body. Its fully automatic blade retraction ensures that the blade immediately conceals itself as soon as you’ve finished cutting, while a safety lock offers reassurance against accidentally triggering the lever. Its small cutting depth helps to keep contents safe when opening packaging too.

Robust, lockable safety knife suitable for a variety of cutting duties
Changing the blade is safer due to the built-in magnet to secure storage of blade inside handle
Fully automatic blade retraction make this knife extremely safe to use and prevents unwanted injuries
Safety lock feature ensures prevention of cuts

Martor Used Blade Safebox, safe storage for used safety knife blades, compact design makes it easy to transport, two slits can shorten snap-off blades for your convenience. Depending on the size, the safebox can hold approximately 10 blades. Lanyard eyelet for ease in carrying around.

No. 65232 (MH3)

No. 60092 (MQ5)