1 x Milwaukee Hand Tools INKZALL™ Liquid Paint Marker Black

1 x Milwaukee Hand Tools INKZALL™ Liquid Paint Marker Yellow

1 x Milwaukee Hand Tools INKZALL™ Liquid Paint Marker White

Pack of 5 Milwaukee Hand Tools INKZALL™ Highlighters, contains one of each colour: Yellow, Pink, Orange, Green Blue.

Pack of 5 Milwaukee Hand Tools INKZALL™ Highlighters Yellow

1 x Milwaukee Hand Tools INKZALL™ Fine Tip Marker Red (Single)

This Pack of 4 Milwaukee Hand Tools INKZALL™ Ultra Fine Tip Pens contains the following: 2 x Black INKZALL™ Ultra Fine Tip Pens1 x Red INKZALL™ Ultra Fine Tip Pen1 x Blue INKZALL™ Ultra Fine Tip Pen

Pack of 4 Milwaukee Hand Tools INKZALL™ Ultra Fine Tip Pens, Black.

The Milwaukee Hand Tools INKZALL™ Ultra Fine Tip Black Marker provides 0.5mm markings for precise writing. The lid features a handy hard hat clip so it can be clipped to the construction site cap, trousers, overalls, etc. Ideal for job site conditions and writing through rough, dusty, wet or oily contaminated surfaces.

Set of 4 INKZALL™ Fine Tip Markers, contains one of each colour: black, red, blue and green.

The Milwaukee Hand Tools INKZALL™ Chisel Point Marker stays sharp, doesn't mushroom or push back under pressure. It has an acrylic nib, ideal for rough surfaces such as OSB and concrete. The ink has a quick drying time, which reduces the risk of smear markings on PVC and metal surfaces. Marker continues to write after 72 hours of cap off time. The thin body is ideal for use in restricted areas with an anti-roll design, so it won't roll off surfaces. With an easy-open cap for one-hand operation. There is also a handy helmet clip so it can be clipped to the construction site cap, trousers, overalls etc. and it also features a lanyard hole. Ideal for use on concrete, wood, metal, plywood, OSB and plastic. Can be used on wet, oily, dusty, rusty, with debris surfaces.

The Milwaukee Hand Tools INKZALL™ Fine Point Marker stays sharp, doesn't mushroom or push back under pressure. It has an acrylic nib, ideal for rough surfaces such as OSB and concrete. The stylus end can be used on iPads, iPhones, tablets and touch phones. The ink has a quick drying time, which reduces the risk of smear markings on PVC and metal surfaces. Marker continues to write after 72 hours of cap off time. The thin body is ideal for use in restricted areas with an anti-roll design, so it won't roll off surfaces. With an easy-open cap for one-hand operation. There is also a handy helmet clip so it can be clipped to the construction site cap, trousers, overalls etc. and it also features a lanyard hole. Ideal for use on concrete, wood, metal, plywood, OSB and plastic. Can be used on wet, oily, dusty, rusty, with debris surfaces.

Tub of 36 Milwaukee Hand Tools INKZALL™ Fine Tip Markers Black

Size. 230mm (9in).

Size. 270mm (10.1/2in).

The M2208 IRWIN Marples Try Square with hardwood stock and hardened steel blade. Bevelled squares are perfect for marking out lines, testing squares and angle lengths. All Marples measuring tools are made from an aluminium block and with a hardened steel blade which is secured by three steel rivets with brass washers, preventing movement. The scales are etched on the surface which ensures long durability. The tools are manufactured according to a very fine tolerances, so all measuring tools are very precise. Also features an edge holder for accurate positioning. Size: 225mm (8.3/4in).

The IRWIN Marples M2200 Try Square has a sealed hardwood stock faced with brass for extra protection against damage and to give longer life and better accuracy. Bevelled squares are perfect for marking out lines, testing squares and angle lengths. All Marples measuring tools are made from an aluminium block and with a hardened steel blade which is secured by three steel rivets with brass washers, preventing movement. The scales are etched on the surface which ensures long durability. The tools are manufactured according to a very fine tolerances, so all measuring tools are very precise. Also features an edge holder for accurate positioning. Size 150mm (6 in).

This Marshalltown Bonded Nylon Mason's Line has the following specification: Length: 152m (500ft)Colour: Flecked White

The Marshalltown M634 Mason's Line Winder can be used to create straight lines and a level surface when laying out posts, patios, footings and more. It has been heat set for increased stability and remains unaffected when in contact with mortar, oil, mildew or water. Its orange colour makes it extremely visible on-site and the plastic winder keeps it intact for safe and neat storage. Complete with 76.2m (250ft) of orange mason's line.

1 x Marshalltown M632 Mason's Line 76.2m (250ft) - Fluorescent Yellow

1 x Marshalltown M631 Mason's Line 76.2m (250ft) - Fluorescent Pink.

1 x Marshalltown M621 Mason's Line 76.2m (250ft) - Yellow

1 x Marshalltown M620 Mason's Line 76.2m (250ft) - White

Plastic brick line blocks used instead of line pins when laying bricks. Pack of 2.

Pair of hardwood brick line blocks.Used instead of line pins.Pack of 2.

This IRWIN STRAIT-LINE Classic Chalk Reel features a fill door, more than 70% larger than the previous design, for quick and easy chalk fill. The 30m (100 ft) abrasion resistant poly line provides up to 6 strikes per pull. The robust steel handle and large centre hub deliver increased durability, strength, and torque, while the durable aluminium housing provides impact resistance. Length: 30m (100 ft).Gear ratio: 1:1.Line type: 50 or 100ft Polyester Line.Delivers: 5 - 6 strikes per pull.

Irwin sliding bevel is ideal for setting and transferring angles. It has a fine steel blade and aluminium block construction. Size: 300mm (12in).

Irwin Aluminium Try Mitre Square 300mm (12 in). Size: 300mm (12 in).

Aluminium Try Mitre Square 250mm (10 in). Size: 250mm.

This Hultafors square is semi-professional with fibreglass-reinforced ABS plastic stock and millimetre graduations on the upper and lower edges of the blade. The blade is made from stainless steel, measuring 1.0 x 45 mm, and has a fibreglass-framed ABS plastic stock, with an 18 mm wide working surface.The graduations are deep etched, and highly resistant to wear. Size: 200mm.

1 x Hultafors V 20 Professional Try Square 200mm (8in)

The Hultafors HULSMV20 Bevel Square with stainless steel blade and aluminium stock has milled working surfaces, for the copying and transfer of angles to work pieces. The square has a screw for a locking blade at the end of the stock for improved accessibility.Size: 200mm.

The Hultrafors Quattro Adjustable Try Square has a millimetre scale which can be set at three positions (45, 90 and 135) and has a tolerance 0.06. It can also be folded making it easy to store and carry. The stock is made of anodised aluminium, the blade is 25cm long x 45mm wide and made of stainless steel, with the scale being deep-etched, and extremely hard-wearing. Size: 250mm.

Adjustable Plasterer's Square with millimetre and degree graduations that can be set in four fixed positions (22.5, 45, 67.5 and 90). It also has an additional 21 angles marked on its scale. The stock and blade are made from anodized aluminium and can be folded together, making it easy to store and transport. It can also be switched between right and left position. Blade Length: 1200mm (47.1/4in)Weight: 1150g.

The Hultafors Dry-Marker has a grip-friendly and ergonomic design. Supplied in a holster with a built-in sharpener for clear markings. It's easy to remove from the holster, so you don't have to let go of what you're working with. The shape of the holster ensures that the pen stays in place even when you move. The pen can be used whilst in the holster or removed completely depending on your preference. There is a hole in the bottom of the holster, this allows dirt and moisture to fall away from the pen, providing a longer life. The lead is easy to change and refills are available.

This Hultafors Mitre Square automatically produces the correct angle when cutting mitres without having to perform any calculations. When the tool is turned to the desired angle, the indicator flag divides the angle by two. The guide is made from fibreglass-reinforced nylon, with an indicator flag of electrogalvanized metal, and can be used for both internal, and external angles.SIze: 150mm.

Suitable for measuring angles or transferring angles from a point of measurement to a work-piece. Made of anodised aluminium for improved durability against corrosion. Alpha x read on the left side of the scale, Beta x on the right and can also be used to read angles between 20 and 160.

The Hultafors CLP30 Chalk Line has a 30m line, metal crank and quick gear function 3:1. The housing is made from ABS plastic, has a big opening for refilling and a cap with bayonet joint and contains up to 100g of chalk. The line is braided cotton/polyester with high absorbing chalk capacity and considerable increased numbers of distinct lines - up to 10 lines. The crank is fitted with an ergonomic release button and knob. It can be locked in the open and closed position. The cap is secured by the hook, no line is left hanging loose. There is also a secure strap function.

The Hultafors Chalk Line comes with a cast powder-coated aluminium body with a sliding filler cover. The cord is braided cotton/polyester, the cotton absorbs the chalk while the polyester provides the strength, and the braid ensures the cord never tangles. The cord is 1 mm in diameter, and has a rupture limit of 16 Kg. 30m / 100ft.Capacity: 80g of chalk.

1 x Hultafors Deep-Hole Marker Red

1 x Hultafors Ink Deep-Hole Marker Black

1 x Pack of 10 Hultafors Dry-Marker Refills containing: 4 x Graphite Leads3 x Red Chalk Leads3 x Yellow Chalk Leads

1 x Pack of 10 Hultafors Dry-Marker Refills containing: 10 x Graphite Leads

The Hultafors 52ME Combination Square can be used as an outside and inside try square, mitre square, depth and marking gauge. It has a stainless steel blade with ground edges, and ends marked in millimetres and inches. The lightweight zinc stock is matt black and is fitted with a scriber. Specification: Size: 300mm (12in)

1 x Hultafors Rafter Square Imperial 7in

1 x Hultafors Rafter Square Metric 18cm

The Hultafors Adjustable Plasterer's Square has millimetre and degree graduations that can be set in 4 fixed positions (22.5, 45, 67.5, 90). There is an additional 21 angles marked on the scale. The stock and blade are made from anodized aluminium. They can be folded together, making it easy to store and transport, and also be switched between right and left position. Specification: Blade Length: 900mm (35.1/2in).

This Fisco X55E Red Plastic Rafter Angle Square is lightweight, ideal for calculating and measuring angles for roof construction. It has a standard foamed polystyrene body, and is used to calculate rafter angles.It can be used as a 90 or 45 mitre square, and has imperial or degree scales.Specification: Length: 175mm (7in).

A versatile instrument which combines the functions of outside and inside try square, mitre square, depth and marking gauge, spirit and plumb level, stainless steel rule, straight edge and scriber. Features: Precision cast zinc stock. Stainless steel blade: 150mm (6in). Graduated scale in inches and millimetres.

This Footprint set is ideal for people new to bricklaying or for the seasoned professional who requires the best quality products. The set contains: 2 x Line Pins1 x Brick Jointer1 x 18m Nylon White Line

Steel line pins, drop-forged 160mm (6 1/4 in) long hardened and chrome plated. Display box of 50.

2 x Footprint 620 Line Pins. Supplied as a card of 2.

1 x Footprint 620B Line Pin Supplied as a single, loose.

This highly versatile combination square has all the uses of a standard combination square. It reads any angle instantly, checks through horizontal and vertical lines, and measures 0-90 in any quadrant.Not affected by magnetic fields, heat or cold.Lightweight stock is finished in matt black.Blade length 12in (300mm) graduated in 32nds, 16ths, and mm. Size. 12in/300mm

A versatile measuring instrument with matt black die cast stock, brass locking screw and stainless steel blade with markings clearly etched on both sides, fitted with separate scriber.Also fitted with a steel blade, centre head and protractor set.

A standard try and mitre square with lightweight die-cast stock fitted with spirit level to give both horizontal or plumb readings.Black japanned finish.The 6in (150mm) stainless steel blade has ground edges and is graduated in inches (16ths) and mm.

A versatile measuring instrument with matt black die-cast stock, brass locking screw and polished steel blade with markings clearly etched on both sides, fitted with a separate scriber. This tool can be used as a try and mitre square, depth gauge, steel rule and straight edge.Spirit level gives horizontal plumb on 45 readings. Blade length 12in (300mm) graduated in 32nds, 16ths, and mm. Size. 12in/300mm

A versatile measuring instrument with matt black die-cast stock, brass locking screw and polished steel blade with markings clearly etched on both sides, fitted with a separate scriber. This tool can be used as a try and mitre square, depth gauge, steel rule and straight edge.Spirit level gives horizontal plumb on 45 readings. Centre head enables the centre of circular objects to be located.Blade length 12in (300mm) graduated in 32nds, 16ths, and mm. Size. 12in/300mm

This Fisher multi-purpose Combination Square has a heavy-duty cast iron stock with ground faces. It can be used as an outside or inside try square, a mitre square or depth and marking gauge.The vial and stock give level 45 and plumb reading. A separate scriber is also fitted. Specification: Size: 12in (300mm).

High-quality, heavy-duty roofing square suitable for both the DIY enthusiast and the craftsman. Stamped with imperial graduations on one face and metric on the other. Made from steel. Size: 400 x 600mm (16 x 24in).

Size. 9in - 230mm.

Size. 6in - 150mm.

Size. 12in - 300mm.

Length: 230mm (9in).

Length: 190mm (7.1/2in)

This Faithfull Aluminium Sliding Bevel is a high-quality bevel with a durable, non-corrosive, stainless steel blade fitted to an accurately machined, heavy-duty, aluminium stock.The Faithfull FAISB250SS sliding bevel has the following dimensions 250mm (10in).

Length: 270mm (10.1/2in)

This Faithfull Mortice Gauge is made from the finest hardwood, and enhanced with brass facing plates and fittings. A nylon friction pad is fitted under the knurled brass thumbscrew to reduce wear to the stem and to ensure secure, smooth and accurate setting of the gauge. Used for laying out mortices and for marking out with the grain. The second pin is used for mortice work can be accurately set by means of the pullslide.

This Faithfull Marking Gauge is made from the finest hardwood, and enhanced with brass facing plates and fittings. A nylon friction pad is fitted under the knurled brass thumbscrew to reduce wear to the stem and to ensure secure, smooth and accurate setting of the gauge. Used to mark parallel lines either with or across the grain.

This Faithfull Cutting Gauge is made from the finest hardwood, and enhanced with brass facing plates and fittings. A nylon friction pad is fitted under the knurled brass thumbscrew to reduce wear to the stem and to ensure secure, smooth and accurate setting of the gauge. Primarily used for scoring across the grain but can be used for cutting small strips of veneer. The re-sharpenable cutter is held securely in place by a solid brass wedge.

This Faithfull Combination Gauge is made from the finest hardwood, and enhanced with brass facing plates and fittings. A nylon friction pad is fitted under the knurled brass thumbscrew to reduce wear to the stem and to ensure secure, smooth and accurate setting of the gauge. Used for laying out mortices and for marking out with the grain. The second pin is used for mortice work can be accurately set by means of the screwslide.

1 x Pack of 2 Faithfull Paint Marker Pens Yellow Red

1 x Pack of 2 Faithfull Paint Marker Pens Black White

Weight: 225g (8oz).

Weight: 140g (5oz).

The Faithfull quick-stabilising 400g steel bob on the Plumb-Auto provides an accurate plumb line within seconds. By using either the magnetic panel or the retractable pin, it can be secured to steel, timber or plaster surfaces, before dispensing a line to the required length. The Plumb-Auto is ideal for all building and decorating applications and the magnetic feature is an asset when working on steel fabrications where nails and pins are ineffective. Bob Weight: 400g (14oz).Line Length: 6.7m (22ft).

The Faithfull 175mm (7in) Marking Knife. A heavy-duty scoring knife featuring a hardwood handle and brass ferrule. The diamond shaped blade is bevelled on one side only, allowing the flat side close contact with a straight edge or cutting guide when laying out, particularly across the grain of the wood.

These Faithfull LP1 large headed Line Pins are made from forged steel, and are protected by zinc plate. They are used in conjunction with builders lines for marking out positions or aligning courses of brickwork etc.They are supplied in a pair with 18 metres of builders line. Specifications: Quantity: Card of 2.Line Length: 18m.

The Faithfull, robust, L-shaped, plastic Line Blocks are a simple tool quickly adjusted under tension for length and height to ensure courses of bricks are running straight and true.They feature built-in line storage and are supplied with 18 metres of orange polyethylene brick line. Specifications: Material: Plastic.Length: 18m.

1 x Pack of 2 Faithfull Fibre Tip Marker Pens Black

Supplied with carry case. Size: 600mm

Supplied with carry case. Size: 1200mm

This Faithfull Roofing Square is designed to provide carpenters with a quick and accurate way to mark out for many building projects and is widely used when constructing roof rafters. It is manufactured from aluminium and has graduations marked with degree measurements, which helps to simplify material layout and timber cutting. Quick, accurate and able to calculate hips, valleys and angles on roofs making it a truly flexible square.

The Faithfull Quick Roofing Square* also known as a layout or angle square, is designed to provide carpenters with a quick and accurate way to mark out for many building projects. It is widely used when constructing roof rafters.The square is manufactured from aluminium and has imperial graduations marked with degree measurements, which help simplify material layout and timber cutting.The Roofing Square is able to calculate hips, valleys and angles on roofs, making it a truly flexible square. Specification: Size: 180mm (7in).

1 x Faithfull Prestige Quick Square Black Aluminium 178mm (7in)

1 x Faithfull Prestige Quick Square Black Aluminium 300mm (12in)

1 x Faithfull Prestige Try Square Black Aluminium 200mm

1 x Faithfull Black Steel Roofing Square 400 x 600mm (16 x 24in)

Ruler Length : 400mm / 16in.

Faithfull Combination Squares can be used in both wood and metalworking applications. Each square features a high-quality cast and machined sliding stock, fitted with a stainless steel rule engraved with both imperial and metric graduations, a spirit level and marking scribe. Combination squares have at least 10 different uses: Measuring rule with metric and imperial scale, 90 inside square, 90 outside square, 135 inside square, 45 inside square, horizontal level, vertical level, T-square slide, marking gauge and depth gauge. This twin pack contains: 1 x 150mm (6in) Combination Square 1 x 300mm (12in) Combination Square

The Faithfull FAICS300SET combination square set incorporates engraved stainless steel rulers with strong metal sliding bodies. The handle features a scriber and a spirit level. This measuring tool is very versatile with at least 10 different uses including: 300mm measure with metric and imperial scale, 90 inside square, 90 outside square, 135 inside square, 45 inside square, horizontal level, vertical level, T-square slide, marking gauge and depth gauge.

1 x Faithfull Prestige Combination Square 300mm (12in).

1 x Faithfull Black Steel Roofing Square 200 x 300mm (8 x 12in)

Ruler Length : 300mm / 12in.

Ruler Length : 150mm / 6in.

1 x Faithfull Prestige Try Square Black Aluminium 300mm

1 x Faithfull Prestige Try Square Black Aluminium 250mm

1 x Faithfull Chalk Powder Yellow 250g

1 x Faithfull Chalk Powder White 250g

1 x Faithfull Chalk Powder White 113g