Thickness: 0.15mm

Thickness: 0.10mm

Inch Gauge 12 in long Thickness: 0.005 in

Inch Gauge 12 in long Thickness: 0.004 in

Inch Gauge 12 in long Thickness: 0.030 in

Inch Gauge 12 in long Thickness: 0.020 in

Inch Gauge 12 in long Thickness: 0.002 in

Inch Gauge 12 in long Thickness: 0.012 in

Thickness: 0.0005 in

Inch Gauge 12 in long Thickness: 0.0015 in

Inch Gauge 12 in long Thickness: 0.010 in

Inch Gauge 12 in long Thickness: 0.001 in

Inch Reading Gauges with Straight leaves 1/2 x 3 1/32 in No. of leaves: 26 Range: 0.0015 - 0.025 in ( 0.0015, 0.002, 0.0025, and 0.003 to 0.025 by 0.001 in steps)

Screw pitch gauges quickly determine the pitch of various external and internal threads. These gauges consist of a substantial steel case with a number of folding leaves at both ends, each leaf having teeth corresponding to a definite pitch.American national - 60 threadsNo. of leaves: 30TPI range: 4 - 42Locking device.

Size 8mm (5/16 in)

Size 6mm (1/4 in)

Size 5mm (3/16 in)

Size 4mm (5/32 in)

Size 2.5mm (3/32 in)

Size 1.5 mm (1/16 in)

Length: 175 mm (7in)

Length: 300 mm (12in)

Screw pitch gauges quickly determine the pitch of various external and internal threads. These gauges consist of a substantial steel case with a number of folding leaves at both ends, each leaf having teeth corresponding to a definite pitch. Whitworth standard - 55 threads No. of leaves: 30 TPI range: 3 1/2 - 60 With positive stop.

Millimetre Reading Gauges with Straight leaves - Sized 12.7 x 114mmNo. of leaves: 13Range 0.04 - 5mm (0.04- 0.08 by 0.01mm steps 0.10, 0.15, 0.20,0.30, 1.0, 2.0, 3.0 and 5.0mm).

Inch Reading Gauges with Straight leaves 1/2 x 4 1/2 in No. of leaves: 13 Range: 0.0015 - 0.200 Inch (0.0015, 0.002, 0.003, 0.004, 0.006, 0.008, 0.010 to 0.040 by 0.01 in steps , 0.075, 0.100, 0.200 in).

This micrometer has a 63.5mm (2.1/2in) base and 3.2mm (1/8in) diameter measuring rod. Base and rod are hardened, ground and lapped. Furnished with ratchet stop, lock nut and case. Size: 0-75mm.Rods: 3.Graduation: 0.01mm.

The Starrett 436.1XRL-2 Outside Micrometer has the following specification: Size: 1-2in.Graduation: 0.001in.

The Starrett 436.1XRL-1 Outside Micrometer has the following specification: Size 0-1 inGraduation 0.001 in

The Starrett 436.1MXRL-75 Outside Micrometer has the following specification: Size: 50-75mm.Graduation: 0.01mm.

The Starrett 436.1MXRL-50 Outside Micrometer has the following specification: Size: 25-50mm.Graduation: 0.01mm.

The Starrett 436.1MXRL-100 Outside Micrometer has the following specification: Size: 75-100mm.Graduation: 0.01mm.

Precision ground straight edge with a bevel on one side, which is excellent for drawing or scribing straight lines and checking surfaces for straightness. The thickness and design permit it to retain shape and accuracy. Specification: Length: 600mm (24 in)Width x thickness: 36 x 4.4mm (1 13/32 x 11/64 in).

This set has an external and internal radius on each leaf, permitting both concave and convex surfaces to be measured. The leaves are specially shaped for use in any position at any angle to measure fillets and radii in corners or against shoulders.Range: 0.75 - 5 mmIncrements: 0.25 mm No. of leaves: 18

Size 9.5mm (3/8 in)

Size 8mm (5/16 in)

Size 6mm (1/4 in)

Size 5mm (3/16 in)

Size 3mm (1/8 in)

Can be used to quickly obtain measurements by adjusting the rule to the required depth. The gauge consists of a hardened steel head complete with locking nut and an accurate, machine divided, tempered steel rule. Range: 0-150mm Graduations: mm, 1/2mm.

Rugged steel centre punch has a mechanism which automatically strikes a blow when downward pressure is applied. Force of blow is regulated by the adjustable knurled cap. No hammer is required. Punch length: 125mm (5 in).Punch diameter: 14mm (9/16 in). Spare points also available STR18APOINT

Millimetre Reading Gauges with Straight leaves 12.7 x 77mmNo. of leaves: 13 Range: 0.03 - 0.5mm ( 0.03- 0.10 by 0.01 mm steps, 0.15, 0.20 to 0.50 by 0.1 mm steps)

Inch Reading Gauges with Tapered leaves 1/2-1/4 x 3 1/32 in No. of leaves: 9 Range: 0.0015 - 0.015 in ( 0.0015, 0.002, 0.003, 0.004, 0.006, 0.008, 0.010, 0.012, 0.015 in).

Range: 2.9 - 4.8 mm (0.115 - 0.187 in)

Range: 1.3-3.2mm (0.050-0.125in)

Range: 0.8-1.6mm (0.030-0.062in)

Range: 0-1 mm (0-0.040 in)

Capacity: 70mm (2 3/4 in). Throat Depth: 45mm (1 25/32 in).

Capacity: 57mm (2 1/4 in). Throat Depth: 30mm (1 7/32 in).

Capacity: 44mm (1 3/4 in). Throat Depth: 25mm (1 in).

Capacity: 32mm (1 1/4 in). Throat Depth: 20.5mm (13/16 in).

Lightweight and ideal for measuring inside diameters, the rods are solid, insulated and assembled on one side of the micrometer head. Anvils on rods are adjustable for length. Rod and anvils are hardened and ground. Furnished in an attractive protective case. Size: 50-300mmGauge: 12mmScrew adjustment: 13mmGraduation: 0.01mm

Size 4 x 100mm (5/32 x 4 in)

Size 3 x 100mm (1/8 x 4 in)

Size 2.5 x 100mm(3/32 x 4 in)

Size 1.5 x 75mm (1/16 x 3 in)

Size 2 x 100mm (5/64 x 4 in)

The Stanley Punch Chisel Set contains a selection of high quality, chrome vanadium steel chisels for cutting, shaping wrought iron, cast iron, steel, brass, bronze, copper and aluminium and for cutting bolts, nuts and rivets. Punches are also made from chrome vanadium steel to precise specifications and are used for marking centre lines, hole locations and pilot drill starting points. Contains the following: 3 x Cold Chisels: 10, 12, 16mm6 x Pin Punches: 1.5, 3, 4, 5, 6, 8mm3 x Centre Punches: 2, 6, 8mm

A 6-piece pin punch set made from quality chrome vanadium steel gives increased strength and durability, for retained accuracy when marking out centre lines, hole locations and pilot drill starting points. Quenched and tempered to precise specifications. Contains the following sizes: 1.5, 3, 4, 5, 6, and 8mm (1/16, 1/8, 5/32, 3/16, 1/4, 5/16in).

The Stanley FatMax Interchangeable Nail Set has an interchangeable system that accepts conventional bits. Fitted with a bi-material, cushion grip for increased comfort and reduced slipping. Specification Nail Sizes: 1/32, 2/32in.

This set of 3 punches contains the following tip sizes:1/32in (0.8mm) Yellow Sleeve 1/16in (1.6mm) Grey Sleeve3/32in (2.4mm) Red SleeveOverall Length: 125 mm / 5in

Tip Size: 2.4mmLength: 5inColour: Red Sleeve

Tip Size: 1/16inLength: 5inColour: Grey Sleeve

Tip Size: 1/32inLength: 5inColour. Yellow Sleeve

Hardened and tempered square head centre punch with knurled shank and black coated finish. The knurled body provides a secure grip during use. Length: 3.2 x 100mm (1/8 x 4in).

Roughneck 3 Piece Nail Punch Set. Each punch is fitted with a colour coded grip for easy identification. Contains: Yellow: 0.8mm (1/32in), Blue: 1.6mm (1/16in), Red: 2.4mm (3/32in)

RIDGID 227S Inner-Outer Reamer Capacity: 12-54mm (1/2 - 2in).Weight: 0.56kg.

RIDGID 223S EN Inner-Outer Reamer Capacity: 6 - 40mm (1/4 - 1.1/4in).Weight: 0.34kg.

Size.M10 x 1.50 Pitch.Intermediate

Size.M8 x 1.25 Pitch.Intermediate

Size.M6 x 1.00 Pitch.Intermediate

Size.M5 x 0.80 Pitch. Intermediate

Please note NOT supplied with a tapping drill.Kit 18mm x 1.5Length 12.7mm (1/2 in)

Please note NOT supplied with a tapping drill.Kit 14.0mm x 1.25Length 1 1/2 and 1 x Diameter

Please note NOT supplied with a tapping drill.ExtensionKit 14.0mm x 1.25Length 1 1/2 X Diameter

Recoil inserts are the quick and easy way to repair damaged threads or creating stronger original threads in alloys and composite materials in original equipment manufacture.Made from corrosion resistant stainless steel, they create stronger threads in most materials and simplifiy changeover from unified to metric or vice versa. Recoil thread repair kits contain a quality HSS tap, Installation tool, precision stainless steel inserts and instructions.Supplied in a sturdy container. Please note NOT supplied with a tapping drill.Kit 12mm x 1.25Length 1 1/2 x Diameter

Kit 10.0mm x 1.0Length 1 1/2D

Please note requires a 16.5mm drill bit - NOT supplied.Size 16mm x 1.5Length 1 1/2 x Diameter

Please note NOT supplied with a tapping drill.Size 14mm x 1.5Length 1 1/2 x Diameter

Supplied complete with appropriate size tapping drill.Size 12mm x 1.5Length 1 1/2 x Diameter

Supplied complete with appropriate size tapping drill.Size 10mm x 1.25Length 1 1/2 X Diameter

Supplied complete with appropriate size tapping drill.Size 8.0mm x 1.0Length 1 1/2 x Diameter

Please note NOT supplied with a tapping drill.Kit 20mm x 2.5Length 1 1/2D

Please note NOT supplied with a tapping drill.Kit 18.0mm x 2.5Length 1 1/2 x Diameter

Please note NOT supplied with a tapping drill.Kit 16mm x 2.0Length 1 1/2D

Please note NOT supplied with a tapping drill.Kit 14.0mm x 2.0Length 1 1/2 x Diameter

Please note NOT supplied with a tapping drill.Kit 12.0mm x 1.75Length 1 1/2 x Diameter

Recoil Inserts are the quick and easy way to repair damaged threads or create stronger original threads in alloys and composite materials, in original equipment manufacture. Made from corrosion resistant stainless steel, they create stronger threads in most materials and simplify changeover from unified to metric or vice versa. Recoil thread repair kits contain a quality HSS tap, installation tool, precision stainless steel inserts and instructions. Supplied in a sturdy container. Specifications:Thread: M11.0.Pitch: 1.50.Type Quantity: Coarse (5 inserts).

Supplied with a tapping drill.Kit 10mm x 1.5Length 1 1/2 X Diameter

Supplied with a tapping drill.Kit 9mm x 1.25Length 1 1/2 X Diameter

Supplied with a tapping drill.Kit 8.0mm x 1.25Length 1 1/2D

Supplied with a tapping drill.Kit 7.0mm x 1.0Length 1 1/2 x Diameter

Supplied with a tapping drill.Kit 6.0mm x 1.0Length 1 1/2 x Diameter

Supplied with a tapping drill.Kit 5.0mm x 0.80Length 1 1/2 x Diameter

Supplied with a tapping drill.Kit 4.0mm x 0.7Length 1 1/2 x Diameter

Supplied with a tapping drill.Kit 3mm x 0.5Length 1 1/2 x Diameter

Supplied complete with appropriate size tapping drill.Size 10 (3/16) UNF x 32TPILength 1/1/2D

Supplied complete with appropriate size tapping drill.Size 1/2 UNF x 20 TPILength 1 1/2 x Diameter

Supplied complete with appropriate size tapping drill.Size 7/16 UNF x 20TPILength 1 1/2 x Diameter

Supplied complete with appropriate size tapping drill.Size 3/8 UNF x 24 TPILength 1 1/2 x Diameter

Supplied complete with appropriate size tapping drill.Size 5/16 UNF x 24 TPILength 1 1/2 x Diameter