The DEWALT DCD710 Sub-Compact Drill Driver has a compact, lightweight design and 15-position adjustable torque control for consistent screwdriving into a variety of materials with different screw sizes and LED light for improved visibility. The 10mm single sleeve keyless chuck has an automatic spindle lock for quick and easy bit change and has 2-speed settings, variable speed and reverse switch plus all-metal gearing for efficient power transmission and long tool life. Specification: Chuck: 10mm KeylessNo Load Speed: 0-400/0-1,500/min.Max. Torque: 16Nm, 15 SettingsCapacity: Steel 10mm, Wood 19mm Weight: 0.91kgThe DEWALT DCD710D2 Sub-Compact Drill Driver is supplied with the following:2 x 10.8V 2.0Ah Li-ion Batteries1 x Multi Voltage XR Li-ion Charger1 x Heavy-Duty Kitbox

The DEWALT DCD706 XR Brushless Sub-Compact Combi Drill has an extremely compact design, with a length of just 168mm, allowing you to get into even smaller tight spaces. The efficient Brushless motor provides 15% more run time compared with the previous generation. With a 15 position adjustable torque control for consistent screw driving, into a wide variety of materials. Fitted with a 10mm single sleeve keyless chuck, with an automatic spindle lock for quick and easy bit change. There is also a bright LED light on the tool foot for high visibility in low light situations. DEWALT 12V tools and batteries are 100% compatible with your existing 10.8V products. Supplied with: 2 x 12V 2.0Ah Li-ion Batteries, 1 x 12/18V DCB112 XR Charger and 1 x Kit Box Specification: Chuck: 10mm KeylessNo Load Speed: 0-425/0-1,500/min.Impact Rate: 25,500/bpmMax. Torque: 57.5Nm, 15 SettingsCapacity: Steel 10mm, Masonry 10mm, Wood 20mmWeight: 1.2kg

The DEWALT DCD701 XR Sub-Compact Drill Driver has an efficient brushless motor that gives 15% more runtime than previous generation. Lightweight (0.9kg) design for ultimate portability and ease of use. With an ergonomically designed handle for optimum comfort and control. The state of charge battery pack allows users to keep track of battery charge easily to prevent running out of battery during a job. Compatible with your existing 10.8V batteries and tools. Supplied with: 2 x 12V 2.0Ah Li-ion Batteries, 1 x 12/18V DCB112 XR Charger, 1 x Belt Hook and 1 x TSTAK compatible Carry Case. Specification: Chuck: 10mm KeylessNo Load Speed: 0-425/0-1,500/min.Max. Torque: 57.5Nm, 15 SettingsCapacity: Wood 20mmWeight: 0.9kg

The DEWALT DCD470 XR FlexVolt Right Angle/Diamond Core Drill delivers high-speed drilling performance, making it ideal for drilling within concrete block, brickwork or wood. The brushless motor offers incredible efficiency and increased power delivery, resulting in less wear and increased longevity of the tool. The two variable speed function allows you to match the appropriate speed and torque depending on application. The Perform and Protect™ E-Clutch detects reactionary torque caused by a bind-up or stall and reduces speed to a manageable level until control is regained, providing optimum control and safety. The adjustable bail handle and 2-position side handle provide safety, leverage and control. Its low head profile allows for better access in tight spaces, offering user versatility. There is also an LED light in the handle for enhanced visibility even when using large accessories. Bare Unit - No Battery or Charger supplied. Specification: Chuck Capacity: 13mmNo Load Speed: 0-400/0-1,320/min.Max. Torque: 269NmCapacity: Concrete Block 152mm, Brickwork 127mm, Wood 158mm, Self Feed Holesaw 117mmWeight: 7.0kg

The Black Decker BDCDD18N Drill Driver delivers the power and speed to drill into wood, metal and for all screwdriving tasks. With 10 torque settings that offer a variety of screwdriving modes in a variety of materials with different screw sizes. Variable speed for ultimate fingertip control for all drilling and screwdriving applications. The drill has a compact and lightweight design with an anti slip, soft grip handle that provides additional comfort in use. Ideal for all drilling tasks in wood up to 25mm and in metal up to 10mm. For building flat pack furniture, Hanging pictures, shelves, curtain rails and blinds. Bare Unit - No Battery or Charger supplied. Specification Chuck: 10mm.No Load Speed: 0-650/min.Max Torque: 28Nm, 10 Settings.Capacity: Wood 25mm, Steel 10mm.Sound pressure (LpA): 64.5 dB(A).Weight: 1.60kg.

The Black Decker BCD700S1K Combi Drill has a compact design with 2 gears and 11 torque settings, for precise screwdriving into various materials and variable speed function for control in a range of applications. It has an all metal motor and gearbox delivers 21,000 bpm for hammer drilling in masonry applications and 0-1,400 rpm variable speed for drilling and screw driving applications. The drill is fitted with a keyless chuck for fast and easy bit changes. Supplied with a double ended screwdriver bit, so you can start your projects straight away. Ideal for all screwdriving, drilling and hammer drilling applications in wood, metal and masonry. 1 x 18V 1.5Ah Li-ion Battery. Specification: No Load Speed: 0-360/0-1,400/min.Chuck: 10mm.Impact Rate: 21,000/bpm.Max. Torque: 40Nm, 11 Settings.Capacity: Masonry/Steel 10mm, Wood 25mm.Sound pressure (LpA): 88.7 dB(A).Weight: 2.21kg.

The DEWALT DCD796P1 XR Brushless Combi Drill is supplied with: 1 x 18V 5.0Ah Li-Ion Battery1 x Multi-Voltage XR Charger1 x Belt Hook1 x Magnetic Bit Holder1 x TSTAK Heavy-Duty Kitbox

This DEWALT DCD796N XR Brushless Combi Drill comes as a bare unit, NO battery or charger supplied.

The Milwaukee M18 FMDP Cordless Fuel™ Magnetic Drilling Press has a brushless POWERSTATE™ motor which provides corded drilling performance with strong magnetic holding force on 1/4in steel and up to 40 18mm holes per battery charge. The REDLINK PLUS™ intelligence system delivers the most advanced digital overload and blade lock-up protection and uniquely enhances the tool performance under load. AUTOSTOP™ lift-off detection detects excess rotation and automatically cuts power to the drill for user protection. The Drilling Press features a self-powered, permanent magnet with a holding force of 8,890N to prevent accidental magnet deactivation for improved user protection and easy alignment. A 2-speed gear box optimises drilling speed for when using annual cutters or twist drill bits. Supplied with: 2 x 18 Volt 5.0Ah Li-Ion Batteries. Specification No Load Speed: 400/690/min.Magnetic Adhesion: 8,890N (906.53kg)Max Drilling Solid Bit: 13mmMax Broaching Capacity: Diameter: 38mm, Depth: 5mmWeight (with Battery): 13kg

The Milwaukee M18 FLAG230XPDB FUEL™ Angle Grinder utilises a POWERSTATE™ brushless motor, REDLINK PLUS™ electronics, and REDLITHIUM™ HIGH OUTPUT™ 12.0Ah battery pack to deliver superior performance, durability and run time in high demand applications. Controlled via a non-lockable safety paddle switch with line-lock-out function to prevent automatic start-up. Fitted with an anti-vibration side handle for lower vibration and a removable dust screen to prevent debris entrance, prolonging motor life. A FIXTEC™ nut allows for tool-free disc change. A disc brake slows the disc down faster for improved user protection. The keyless guard enables great cutting capacity and fast guard adjustment without using a key. Supplied with 1 x Quick-Release Safety Guard, 1 x AVS Side Handle, 1 x Flange, 1 x FIXTEC™ Nut, 2 x Dust Screens, 1 x Wrench, 1 x 18V 12.0Ah M18 HB12 Li-ion Battery, 1 x M12-18 FC Charger and 1 x Kitbox. Specification: No Load Speed: 6,600/min.Max. Cutting Depth: 65mmDisc Diameter: 230mmSpindle Size: M14Weight: 5.3kg (inc. Battery Pack)

The Milwaukee M18 BMS20-0 2.0mm Plate Shears provide accurate cuts with a maximum cutting depth of 2.0mm in steel. It has a unique 360 tool-free rotating head with 12 locking positions to access tight spaces and increasing user comfort. The in-line wrist design provides increased control during cutting and there is a variable speed trigger for extra control. REDLINK™ overload protection electronics in the tool and battery pack deliver best in class system durability. Individual battery cell monitoring optimises tool run time and ensures long term pack durability. There is also a belt clip for secure mobility Bare Unit, No Battery or Charger supplied. Specification No Load Speed: 0-2,500/min.Capacity: Aluminium: 3.2mm, Steel: 2.0mm.Minimum Cutting Radius: 180mm.

This Milwaukee M12 FCOT-0 FUEL™ Cut Off Tool comes as a Bare Unit, no battery or charger supplied.

This Milwaukee HD18 AG-402 115mm Angle Grinder is supplied with: 2 x 18V 4.0ah Li-ion Batteries1 x Charger1 x Kitbox

The Milwaukee HD18AG-0 Angle Grinder comes as a Bare Unit, NO battery or charger supplied.

The HiKOKI G3613DB Multi-Volt Brushless Grinder with a large 2-stage paddle switch (dead man action). Fitted with a brushless motor for increased power and performance thanks to the improved electrical efficiency and power transfer. It has a lightweight and compact body with a dust and water-resistant construction. 5-stage variable speed system plus Auto Mode: The speed automatically shifts between high (9,500/min.) and low (5,500/min.) speeds depending on the load, resulting in more effective operation. This machine is packed full of safety features: an electronic brake, kickback protection system, anti-restart protection and soft start. This machine utilises the next generation of 36V battery power developed from user needs and HiKOKI's original technology. Batteries are compatible with existing Hitachi 18V tools. Supplied with: 2 x 18/36V 5.0/2.5Ah Multi-Volt Li-ion Batteries, 1 x Side Handle, 1 x Wrench, 1 x Abrasive Wheel, 1 x UC18YSL3 Charger and 1 x Carry Case Specification: No Load Speed: 3,000 - 9,500/min.Disc Diameter: 125mm, M14 SpindleOverall Length: 358mmWeight: 2.8kg

The HiKOKI G3612DA/JRZ Multi-Volt Angle Grinder is supplied with: 2 x 36V 2.5Ah Multi-Volt Li-ion Batteries*1 x Wrench1 x Side Handle1 x Abrasive Wheel1 x UC18YSL3 Charger1 x Case *Multi-Volt batteries for high power output similar to mains powered tools. Batteries are compatible with existing Hitachi/HiKOKI 18V tools.

The Einhell TE-AG 18 Li Kit Power X-Change Angle Grinder is supplied with: 1 x 18V 3.0Ah Li-ion Battery1 x Charger1 x Carry Case

This Einhell TE-AG 18Li Power X-Change Angle Grinder is supplied as a Bare Unit - No Battery or Charger supplied.

This DEWALT DCS690X2 FlexVolt XR Cordless Cut Off Saw is supplied with: 2 x 18/54V 9.0/3.0Ah FlexVolt Li-ion Batteries1 x Charger

This DEWALT DCS690N XR FlexVolt Cut Off Saw comes as a bare unit, NO battery or charger supplied.

The DEWALT DCS491 XR Cordless Metal Shears have a compact, lightweight design with a D shaped, rubber overmoulded handle for comfortable use in all orientations. The variable speed trigger provides increased control, even in difficult applications. There is also an LED light for improved cut visibility. Bare Unit, No Battery or Charger Supplied. Specification No Load Speed: 0-2,450/min.Capacity: Mild Steel: 1.3mm.Stainless Steel: 1.0mm.

The DEWALT DCG426P2 DCG426 XR Brushless Die Grinder is supplied with: 2 x 18V 5.0Ah Li-ion Batteries1 x 6mm Collet1 x Spanner1 x Multi-Voltage Charger1 x Heavy-Duty Kitbox

The DEWALT DCG426N XR Brushless Die Grinder is supplied as a bare unit, no battery or charger supplied.

The DEWALT DCG418X2 XR FlexVolt Grinder is supplied with: 2 x 18/54V 9.0/3.0Ah FlexVolt Li-ion Batteries1 x Side Handle1 x Keyless Guard1 x Blade Wrench1 x DCB116 Charger1 x TSTAK™ II Carry Case

The DEWALT DCG418T2 XR FlexVolt Grinder is supplied with: 2 x 18/54V 6.0/2.0Ah FlexVolt Li-ion Batteries1 x Side Handle1 x Keyless Guard1 x Blade Wrench1 x DCB116 Charger1 x TSTAK™ II Carry Case

The DEWALT DCG418N XR FlexVolt Grinder is supplied as a Bare Unit - No Battery or Charger supplied.

The DEWALT DCG414T2 XR FlexVolt Grinder is supplied with: 2 x 18/54V 6.0/2.0Ah FlexVolt Li-ion Batteries1 x 2 Position Side Handle1 x Keyless Protection Guard1 x Blade Wrench1 x Charger DEWALT FlexVolt XR batteries stand at the forefront of cordless technology. They are the worlds first convertible 18/54V batteries, offering unprecedented levels of power. Provides the unique ability to power heavy-duty construction power tools whilst still being compatible with existing DEWALT XR 18V products and offering increased runtime.

The DEWALT DCG414N FlexVolt XR Grinder comes as a bare unit, NO battery or charger supplied.

DEWALT DCG412M2 125mm XR Premium Angle Grinder 18 Volt It is supplied with a 2 position side handle, keyless protective guard, blade wrench, multi-voltage charger, 2 x 4.0Ah XR Li-ion battery packs with state of charge indicator and a heavy-duty kit box.

DEWALT DCG406N XR Brushless Angle Grinder with paddle switch operation. An electronic brake stops the wheel quickly when the trigger is released, whilst an electronic clutch reduces the kickback reaction in the event of a pinch or stall. A mesh cover restricts dust being sucked through the motor, prolonging motor life. The ergonomic design includes a rubber overmould for increased grip and comfort. Its two-position side handle allows for greater comfort and control. Bare Unit - No Battery or Charger supplied. Specification: No Load Speed: 9,000/min.Max. Disc Diameter: 125mm.Spindle Thread: M14.Weight: 1.75kg.

The DEWALT DCG405P2 XR Brushless Grinder is supplied with: 2 x 18 Volt 5.0Ah Li-ion Batteries1 x 2 Position Side Handle1 x Keyless Protective Guard1 x Blade Wrench1 x Multi-Voltage Charger

The DEWALT DCG405FN XR Brushless Grinder has a flat head design for access to acute angles with a compact gear case for increased access to tight spaces. The powerful fan cooled motor is fitted with a mesh cover that provides additional motor protection by preventing dust being sucked through the motor. Its electronic clutch reduces the kickback reaction in the event of a pinch or stall. The 2 position side handle provides greater comfort and control whilst the rubber overmould provides enhanced grip and comfort. For added safety the electronic brake stops the wheel quickly when the trigger is released. Bare Unit, No Battery or Charger. Specification: No Load Speed: 9,000/min.Disc Diameter: 125mm, M14 SpindleWeight: 1.8kg

The DEWALT DCG405N XR Brushless Grinder is supplied as a bare unit, no battery or charger supplied.

The DEWALT DCG200T2 XR FlexVolt Wall Chaser is supplied with: 2 x 18/54V 6.0/2.0Ah FlexVolt Li-ion Batteries2 x Premium Diamond Blades1 x Set of Spacers (3, 6, 9 12mm)1 x Chisel1 x Hex Blade Wrench1 x Deep TSTAK Kit Box1 xMulti-Voltage Charger

The DEWALT DCG200NT XR FlexVolt Wall Chaser comes as a bare unit, NO battery or charger supplied.

DEWALT DCG412N 125mm XR Premium Angle Grinder 18V Bare Unit, No Battery or Charger Supplied.

The Steinel MH3 Cordless Heat Gun with 2 temperature settings, heats up to 300C in a maximum of 5 seconds. The security lock button and LED illumination on the base of the tool ensure safe working. Compatible with all push-on standard nozzles from STEINEL. Supplied with 1 x 8.0Ah Li-ion Battery, 1 x Charger and 1 x Carry Case. Specification: Air Flow: 200 L/min.Temperature: 300-500CTemperature Setting: 2 Stage

The Steinel BHG 360 heat gun has a powerful Li-ion rechargeable battery. This cordless version of the practical HG 350 S provides ultimate freedom of movement for hot-air applications - even at places without mains power. The formidable 36-volt Li-ion power pack that drives the heat gun has a capacitance of 4000 mAh and delivers the energy for 15 minutes of unrestricted hot-air work. It has no memory effect and impresses with minimal self-discharge. As a result, this hot air tool - which provides the same temperature stages at its mains-powered counterpart - is immediately ready for operation even after a prolonged period out of use. The BHG 360 features an LED lamp for steady lighting in the working area. The charger supplied with the tool recharges the battery to 75% capacity in just 30 mins and to full charge in 60 mins. Specification Air Temperature With/Without Nozzle: 400C/500C.Airflow: 100 L/min.Charging time 4.0Ah 30 min. (75%) 60 min. (100%).Run Time: 15 min.Weight: 1.79kg.

The Senco SRT40 Cordless Rebar Tying Tool has been designed for rapid and strong tying of rebar and underfloor heating pipes. Ideal for trade professionals. Fitted with a brushless motor for increased working life and operating times. Supplied with: 2 x 18V 4.0Ah Li-ion Batteries, 1 x Charger, 2 x Reels of Rebar Tying Wire, 1 x Allen Wrench, 1 x Belt Clip and 1 x Carry Case. Specification: Rebar : 12-40mmTies per Charge:4,500 (3 reels)Operating Temperature Range: -15 to60CCharge Time: 90 min.Weight: 2.6kg

Senco Rebar Tying Wire for rapid and strong tying of rebar and underfloor heating pipes. Electro-galvanised for rust prevention. Specification: Wire Gauge: 0.8mm

The Metabo RW 18 LTX 120 Cordless Stirrer for powerful mixing on the construction site. With electronic soft start for splash-free working and Vario-Constamatic (VC) Electronics: for working with materials requiring customised speeds, which remain almost constant under load. It also features overload protection that protects the motor from overheating. The ergonomic handles are set in a favourable position, meaning that minor effort is required to guide the stirrer. It also has a robust, metal gripping frame that helps to protect against damage. The battery pack (not supplied) is protected by its location on the top and helps to ensure perfect balance when stirring. Bare Unit, No Battery or Charger supplied. Supplied with: 1 x Stirrer Paddle RS-R2 (120mm). Specification: No load Speed: 0-750/min.Tool Fixture: M14Max. Mixing Paddle Diameter: 120mmMax. Recommended Mixing Amount: 40 litresWeight: 4.2kg (including battery pack)

The Milwaukee M18 FPM Cordless FUEL™ Paddle Mixer has a POWERSTATE™ brushless motor that enables it to mix heavy compounds, such as concrete and mortar. There are 3 different ways of controlling the speed (8-speed setting dial, variable speed trigger and a lock-on button) for clean and consistent mixes. The 180 adjustable handle has 16 adjustable settings for the optimum handle position based on preference and comfort. There is also an LED work light for the brightest workspace illumination. Comes as a Bare Unit, No Battery or Charger supplied. Specification: No Load Speed: 0-550/min.Max. Mixing Capacity: 20 kg/L.Max. Stirrer Paddle : 120mmMixing Paddle Thread: M14Weight: 3.0kg (with battery)

The Milwaukee M18 BLTRC Threaded Rod Cutter provides a fast and effortless solution for cutting threaded rods. It has a fully balanced tool design that delivers optimum balance for overhead cutting, as well as great stability for pre-fab applications. Its centred grip allows for one-handed operation. The cutting head includes the most common size cutting dies: M6, M8, M10 and M12, the size can be changed by rotating the dies. The die opens up automatically after a cut is complete, this allows for fast repetitive cuts. Optimised tool handling allows better visibility, guarantees easy alignment and precise cut accuracy. Bare Unit, No Battery or Charger supplied. Specification: Min. Rod Length: 3.8cmCapacity: Mild Steel M6, M8, M10, M12; Stainless Steel M6, M8, M10

The Milwaukee M18 BHG-502 Cordless Heat Gun is supplied with: 2 x 18V 5.0Ah Li-ion Batteries1 x Reduction Nozzle for heat intensity on a specific area1 x Reflector Nozzle to apply heat around an object, such as pipes1 x Charger1 x Carry Case

The Milwaukee M18 BHG-0 Cordless Heat Gun comes as a Bare Unit, no Battery or Charger supplied.

The Milwaukee M12 BPRT-201X Pop Rivet Tool is supplied with 1 x 2.0Ah Li-ion Battery and Charger.

The Milwaukee M12 BPRT-0 Pop Rivet Tool comes as a bare unit, no battery or charger supplied.

The Milwaukee M12 BI Inflator has a compact, lightweight design for fast inflation of car, light truck and compact equipment tyres. Fitted with a high-efficiency motor and pump. Auto shut-off technology, inflates to a pre-selected pressure for highly accurate inflation. The anti-vibration stand is fitted with all-rubber feet to prevent movement whilst inflating. Easy to read, illuminated LCD display with a digital pressure and fuel gauge that displays remaining charge. To the rear of the inflator there is storage for the hose and nozzles. Flexible battery system: works with all Milwaukee M12™ batteries. Bare Unit, No Battery or Charger supplied. Supplied with: 1 x Ball Inflation Needle, 1 x Presta Chuck, 1 x Inflator Nozzle and 1 x Schrader Chuck. Specification: Max. Pressure: 8.27 bar /120 psiOutput: 24.9 L/min at 0 bar, 17.8 L/min at 2.41 barGauge Accuracy: 3%Duty Cycle: 50% (10 minutes on/10 minutes off)Hose Length: 660mmDimensions: 190.5 x 165.1mmWeight: 1.6kg

The Milwaukee C12 PC Pipe Cutter has a high-performance 500 rpm motor that cuts 12mm copper pipe in less than 3 seconds. It has an all-metal sealed front end for water protection that is rust and corrosion resistant. The pipe cutter has an auto locking cut mechanism that cuts installed copper tubing with as little as 37mm clearance. Auto adjusting jaws automatically adjust to the pipe size, and a built-in LED light illuminates the work surface. The C12 PC features REDLINK™ overload protection electronics to deliver excellent system durability. A fuel gauge displays the remaining battery charge state. Specifications: Voltage: 12 Volt.Copper tube capacity: 12 - 28mm.Cutting speed: 500 rpm.Minimum space for tube cutting: 80mm.Length: 360mm.Weight: 1.5kg. Batteries and charger NOT included.

The Flex Power Tools MXE 18.0-EC Cordless Mixer has a brushless motor with greater efficiency and longer service life. With an electronic management system (EMS) that protects the machine, extends the service life and increases efficiency. The large, rugged 2-gear unit features optimum ratios for powerful torque and speeds for mixing different materials. Fitted with a 3-level (cleaning, stirring up and mixing) switch that can be reached from the grip position without interrupting work. There is also a rotary switch to set the optimum mixing speed: speed 1 for highly viscous materials, speed 2 for medium and low viscosity materials, and an accelerator switch for a slow and gentle start. The flexible rubber sleeve over the on/off switch prevents the ingress of dirt. No malfunctions caused by jammed switches. Ergonomic handles for fatigue-free arm posture and upright body posture allow for comfortable operation. Four corner guards with rubber buffers provide secure storage during transportation and offer protection against shocks and impacts at the building site. The protective cap above the motor housing helps guide the cooling air flow and prevents water ingress. Patented spindle lock with start-up protection for tool-less exchange of the mixing paddle. Suitable for mixing applications up to 30kg Specification: No load Speed: 1st Gear: 0-210/325/530/min., 2nd Gear: 0-320/490/780/min.Tool Fixture: M14Clamping Collar: 53mmMax. Mixing Paddle Diameter: 120mm Weight: 4.1kgThe Flex Power Tools MXE 18.0-EC Cordless Mixer Bare Unit, no battery or charger supplied.

The Flex Power Tools BW 18.0-EC Cordless Blower is fitted with a brushless motor for greater efficiency and a longer service life. It has a compact, lightweight design and an ergonomically shaped soft handle with on/off switch and lock for continuous operation. The integrated electronic management system (EMS) protects the machine, extends the service life and increases efficiency. The blow tube and nozzle can be removed for easier storage. Supplied with an adaptor and matching reduction nozzles to inflate air beds, etc. Bare Unit, No Battery or Charger Supplied Specification: No Load Speed: 10,600/14,200/18,000/min.Max. Air Speed: 80m/secMax. Air Flow Rate: 3.11m³/minWeight: 1.2kg

The DEWALT DCS350 XR Threaded Rod Cutter has been designed as a dedicated tool for cutting threaded rod. Cuts rods with a shearing force, minimising the risk of burring on a cut. There is no moving blade, no sparks and no metal chips. Accessories can be changed by using the on-board hexagon key and there is also an LED for visibilty in dark areas. Supplied with a Metric Cutting Die M6-M12. Bare Unit, No Battery or Charger Supplied. Specification Cutters: M6, M8, M10 M12.Weight: 4.1kg.

The DEWALT DCMB562P1 XR Brushless Axial Blower is supplied with: 1 x 18V 5.0Ah Li-ion Battery1 x 18V Charger

The DEWALT DCMB562N XR Brushless Axial Blower comes as a Bare Unit - No Battery or Charger supplied.

The DEWALT DCM572X1 FlexVolt XR Blower is supplied with: 1 x 18/54V 9.0/3.0Ah FlexVolt Li-ion Battery1 x 8 Amp Li-Ion Charger1 x Concentrator Attachment DEWALT FlexVolt XR batteries stand at the forefront of cordless technology. They are the worlds first convertible 18/54 Volt batteries, offering unprecedented levels of power. Provides the unique ability to power heavy-duty construction power tools whilst still being compatible with existing DEWALT XR 18 Volt products and offering increased runtime.

The DEWALT DCM572 FlexVolt XR Blower comes as a bare unit, NO battery or charger supplied.

The DEWALT 18V DCM562P1 Brushless Outdoor Blower is supplied with: 1 x 18V 5.0Ah Li-ion Battery.

The DEWALT DCE531 XR Concrete Vibrator removes air from concrete forms to strengthen concrete and improve consistency of mix. The motor and drive shaft are sealed for improved durability. Lightweight and compact design, suitable for single person operation. A tool-free locking nut allows easy removal of the shaft for transportation. Bare Unit, No Battery or Charger. Specification: Power Output: 360WVibrations per minute: 15,000/vpmShaft Length: 1.2mHead Diameter: 28.6mmHand/Arm Vibration: 2.8m/s Vibration/Uncertainty: 1.6m/sWeight: 3.08kg

The DEWALT DCE530 XR Cordless Heat Gun can be used for a multitude of applications on site, such as: shrinking electrical tubing, bending PVC pipes, drying materials, loosening nuts and bolts etc. It has a compact design that is easy to use. The lock-on button allows the heat gun to be kept on, improving user comfort and enabling hands-free use. It also has a lock-off safety switch which prevents the trigger from being activated accidentally during transport or storage. Supplied as a Bare Unit, no battery or charger supplied. Includes 1 x Reflector Nozzle and 1 x Surface Nozzle. Specification: Airflow: 109-190L/min. Air Temperature: 290-530CWeight: 0.5kg

The DEWALT DCD240X2 XR FlexVolt Paddle Mixer is supplied with: 2 x 18/54V 9.0/3.0Ah FlexVolt Li-ion Batteries1 x Fast Charger1 x 160mm Centre Drawn Down Swirl Mixing Paddle1 x Heavy-Duty Kit Bag

The DEWALT DCD240N XR FlexVolt Paddle Mixer is supplied as a bare unit, no battery or charger supplied.

The DEWALT DCC018N XR Triple Source Inflator is a compact and lightweight, high-performance inflator with a durable easy-to-use design. The digital gauge allows you to preset desired 'psi' and pressure display for easy display and ease, whilst the automatic shut-off feature prevents over inflation. Ideal for tackling big tasks thanks to its high/low pressure output. The inflator is capable of inflating at a rate of up to 0.35L/min. @ 6.2 bar or 0.6L/min. @ 2 bar. Includes: 1 x 12V Car Power Adaptor and 3 x Accessory Bits. Bare Unit, No Battery or Charger Supplied. Specification: Units of measure: bar, kPa, psiOutput: up to 0.35L/min. @ 6.2 bar, 0.6L/min. @ 2 barWeight: 2.7kg

The Milwaukee M18 BBL Compact Blower delivers the fastest jobsite cleanup, with the best in class power to size ratio. It is fitted with power control that includes a 3-speed electronic switch, lock-on and a variable speed trigger which allows for versatile clearing power. The blower moves air at 257km/h for class-leading performance and has a shock-absorbing polymer body with a crush resistant nozzle. The blower delivers jobsite durability. Included is a 9in extension nozzle to clear dust and debris easily from the ground or overhead. Bare Unit, No Battery or Charger Supplied. Supplied with 1 x 9in Extension Nozzle and 1 x Universal Inflator/Deflator. Specification Max Air Flow: 257km/h (160mph).Speed: 3-Speed Electronic Switch.Weight: 1.7kg.

The DEWALT DCV100 XR Compact Jobsite Blower has a compact and lightweight design that is ideal for jobsite clean-up. Variable speed slider switch with variable speed trigger and a lock-on/off switch for improved control. Supplied with inflator/deflator attachments for versatile applications. Bare Unit, No Battery or Charger Supplied. Specification Max Airflow: 80m/sec.Air Speed: 18,000/min.Weight: 1.3kg.

The Steinel HL Scan measures the temperature of the workpiece surface whilst working on it with a hot air tool. An acoustic signal sounds as soon as heat either exceeds or falls below the ideal temperature. Its display also shows whether the workpiece surface is too hot or too cold. Red means too hot, green means ideal temperature and blue means too cold. The HL Scan can be fitted to hot air tools HL1920E, 2020E, HG2120E and HG2320E. The warning tolerance range can be selected to suit individual needs. If chosen, the visual and acoustic warning can be deactivated. Temperature Measurement Range: 0-300COptimum Distance From Workpiece: 15cmBattery: 9V (supplied)

The Steinel HL2020E 3-Stage Airflow LCD Heat Gun deliveres a hot air temperature of up to 630C. The current working temperature and airflow rate is indicated on the LCD display which is easy to read at any light level. The tool immediately responds to heat build-up by indicating a warning triangle on the display. Fitted with a residual heat indicator that warns that the delivery nozzle is still hot and can cause burns even long after the tool has been unplugged. It features professional technology for shaping tiles, desoldering circuit boards, welding plastics, drying repair filler, shrinking cable sleeves, soldering pipes and much more. Supplied with: 1 x 9mm Reduction Nozzle and 1 x Case. Specification Input Power: 2,200 Watt.Air Flow: 150/150-300/300-500 l/min.Air Temperature: 80-630C.Weight: 0.88kg.

The Steinel HL1920E 3-Stage Airflow Heat Gun is a versatile tool with infinitely adjustable temperature in 3 airflow stages. It is ideal for removing and welding sheetings, welding plastics, shrinking on cable sleeves, shaping, soldering, drying, thawing, stripping paint and much more. This hot air tool has an optimised centre of gravity, making it particularly easy to use with just one hand. Specification Input Power: 2,000 Watt.Airflow: 150/150-300/300-500 l/min.Air Temperature: 80-600C.Weight: 0.84kg.

Steinel HL1820S Pistol Grip Heat Gun 110 Volt Version. SpecificationInput Power: 1,300W.Airflow: 200/300/500 L/minAir Temperature: 50/400/600C.Weight: 0.8kg.

Steinel HL1820S Pistol-Grip Heat Gun 240 Volt Version. SpecificationInput Power: 1,800W.Airflow: 200/300/500 L/minAir Temperature: 50/400/600C.Weight: 0.8kg.

The Steinel HL1620S 2-stage Airflow Heat Gun is an indispensable all-rounder. It has a 2-stage temperature setting and is ideal for drying plasterwork, shrinking on cable sleeves, thawing frozen water pipes, stripping paint, waxing skis and snowboards and much more. This hot air tool has an optimised centre of gravity for fatigue-free working with one hand. It has an integrated thermal cut-out to prevent overheating. Specification Input Power: 1,600W.Airflow: 240 L/min.Air Temperature: 300-500C.Weight: 0.67kg.

The Steinel HG2120E Car Wrapper Hot Air Gun is fitted with a 7.5m cable which provides a particularly wide action radius. This makes it ideal for wrapping work on large areas. The ceramic heater's temperature can be infinitely varied from 80-630C at the turn of a thumbwheel. Airflow is controlled in 3 stages. The heat gun has a brushless motor and features an integrated thermal cut-out to prevent overheating. Its ergonomic handle with soft inlay allows comfortable and safe working with one hand. Supplied with a HL Scan Temperature Scanner that measures the temperature of the workpiece surface whilst working on it with a hot air tool. An acoustic signal sounds as soon as heat either exceeds or falls below the ideal temperature. Its display also shows whether workpiece surface is too hot or too cold. Red means too hot, green means ideal temperature and blue means too cold. Specification Input Power: 2,200 Watt.Airflow: 150/150-300/300-500 l/min.Air Temperature: 80-630C.Weight: 0.67kg.

1 x Steinel HG2620E Barrel Heat Gun 1,650W 110V Version

Steinel HG2620E Barrel Heat Gun 2300W 240V Version

Steinel HG2420E Industrial Barrel Grip Heat Gun 110 Volt Version. SpecificationInput Power: 1,400W.Airflow: 150-400 L/min.Air Temperature: 80-650C.Weight: 0.61kg.

Steinel HG2420E Industrial Barrel-Grip Heat Gun 240 Volt Version. SpecificationInput Power: 2,200W.Airflow: 150-400 L/min.Air Temperature: 80-650C.Weight: 0.61kg.

The Steinel HG2320E LCD Heat Gun 1,400 Watt 110 Volt Version.

1 x Steinel HG2320E LCD Heat Gun 2,300 Watt 240 Volt Version.

The Olympia Tools Heat Gun has a powerful motor and 3 heat/airflow settings, controlled by an easy-to-use switch. For added safety, there is a built-in overheat feature that prevents the tool from overheating. Fitted with a comfortable soft grip. The end of the heat gun doubles as a sturdy stand, ideal when the nozzle is hot after use. Supplied with: 4 x Nozzles and 1 x Scraper. Specification: Input Power: 2,000WHeat Settings: 50/400/600CAirflow: 500/250/500 L/min.Weight: 0.80kg

The Metabo H16-500 heat gun has a powerful motor with optimum device cooling with 2 heating and 3 blower levels. The ergonomic design and rubber-coated handle provides ideal handling and a safe stationary application due to large non-slip floor space. Ideal for many applications including:- Dust-free removal of all metal and wood varnished coats.- Drying fresh varnished coats and filler compounds.- Thawing frozen water pipes etc.- Crimping cable ends.- Repairing welding tents, boats and other similar applications. High service life due to easy-to-clean air filter. Specifications:Air volume: 240 / 450L/min.Air temperature: 300 / 500 C.Rated input power: 1.600W.Weight (without power cable): 700g.

1 x HiKOKI RB40VA/J2 Blower 110V version.

The Einhell TH-HA 2000/1 Hot Air Gun is suitable for DIY enthusiasts on jobs involving the removal of old lacquer and paint, the fitting of plastic tubes, and much more besides. There are two power settings, so the temperature and air rate can be set for particular job requirements. Four nozzles are included for optimum adjustment of the TH-HA 2000/1 hot air gun to the particular task. There is also a paint scraper for expert removal of lacquer and paint residues from surfaces. Built-in overheat protection and the stable base ensure maximum safety, making the hot air gun also suitable for stationary applications. Supplied with: 1 x Colour Rasper, 1 x Fishtail Nozzle, 1 x Reflector Nozzle, 1 x Deflector Nozzle, 1 x Cone Nozzle and 1 x Carry Case. Specification: Input Power: 2,000WAirflow: 300-550 L/min. Air Temperature: 350-500CWeight: 0.70kg

DEWALT D26414 LCD Premium Heat Gun 1600 Watt 110 Volt Version.

DEWALT D26414 LCD Premium Heat Gun 2000W 240V Version.

The DEWALT D26411 Heatgun has a durable design with added protection for the heating element. Lightweight ergonomics and a compact design increase comfort during application. The Heatgun has 2 airflows to maximise control in most applications. It comes with a large stable support stand to ensure safety in staionary applications and is supplied with 2 cone attachments to increase versatility for specific applications. Applications: Stripping paint.Shrinking packaging and wrapping. Softening adhesives and removing stickers. Automotive applications. Moulding and welding plastics. Softening metal pipes for bending. Shrinking cable ends. Loosening nuts and bolts. Thawing frozen water pipes. Specification Input Power: 1,800W. Airflow: 250/450 L/min. Air Temperature: 50-400C/50-600CLength: 253mm. Height: 210mm.Weight: 0.8kg.

The Black and Decker KX2001K is a powerful 2,000 Watt, 2-speed heat gun with variable heat control in all heat applications. The heat gun is suitable for the following applications:Stripping paint, varnish or adhesivesLoosening rusted or seized nailsThawing frozen water pipesBending and shaping metal. The heat gun is supplied in a kitbox, along with the following:Reflector nozzle for working around pipes or in enclosed areasGlass protection nozzle to protect glass when working on window framesReduction cone to concentrate heat into a smaller area for tough applicationsWide nozzle for working on larger work piecesMulti-sided scraper. Specification Input Power: 2,000W. Air Flow: 300/500 L/min.Temperature Range: 50-450c/90-600c.Cable Length: 2m.Weight: 0.8kg.

The BLACK DECKER KX1650 Heat Gun is ideal for stripping paint, varnish and adhesives. It has a built-in stand, for hands free applications and cooling, and has 2 heat and airflow settings for more control in different applications. Specification Input Power: 1,750W.Airflow: 570-740 L/min.Temperature Range: 460-600C.Cable Length: 2m.

The Metabo LC 40 Li-ion Charger for charging 10.8V Li-ion battery packs. Voltage: 10.8VBattery Chemistry: Li-ionCharging Current: 2.3 A

The Metabo ASC 55 Air Cooled Slide Charger charges all Li-Power Compact, Li-Power Plus, Li-Power Extreme and LiHD slide-on battery packs (12-36V). Monitors charging via a microcontroller and delivers acurate battery diagnosis. The charger switches to compensation charge: to conserve the capacity, the battery pack is charged for 1 second every 45 seconds with 2.5 ampere. With a 'AIR COOLED' function: the patented principle is based on air-cooling the battery pack during the charging process. The battery packs are gently cooled down to the required charging temperature, and then during the charging process are constantly maintained at optimum temperature. With this principle, a higher tool life of the battery packs and up to 30% shorter total charging time can be achieved.

1 x Metabo Slide Battery Pack 18V 2.0Ah Li-ion.

1 x Metabo Slide Battery Pack 18V 4.0Ah Li-Ion

1 x Metabo Slide Battery Pack 18V 8.0Ah LiHD.

1 x Metabo Slide Battery Pack 18V 5.5Ah LiHD.

1 x Metabo Slide Battery Pack 18V 4.0Ah LiHD.

The Milwaukee M18 B6 REDLITHIUM-ION™ Slide Battery Pack is fitted with REDLINK™ Intelligence and overload protection, which prevents the user from damaging their tools. It has a temperature control cell frame that keeps the battery at an ideal temperature range to provide maximum life. There is a waterproof protection barrier, a rubber overmould and shock responsive separators to protect the battery from damage. With individual Cell Monitoring which ensures optimal charge and discharge for maximum life and discharge protection which prevents cell damage from over-discharge.They offer up to twice the run time, 20% more power and up to twice the recharges compared to other Lithium-Ion technologies or with previous Milwaukee battery technology. Results dependant on voltage, tool and application. Battery Capacity: 6.0Ah.Battery Chemistry: Li-ion.Voltage: 18 Volt.

The Milwaukee M18 B2 REDLITHIUM-ION™ Slide Battery Pack has the following specification: Battery Capacity: 2.0Ah.Battery Chemistry: Li-ion.Voltage: 18 Volt.

The Milwaukee M14 - M18 Multibay Multi Voltage Charger 110 Volt Version.

Milwaukee M14™ - M18™ Multibay Multi Voltage Charger 240 Volt Version.

The Milwaukee M12 NRG-201 Energy Kit, contains the following: 1 x 12 Volt M12 C12C Li-ion Charger, with a compact and lightweight design that gives you more runtime and power, enabling you to work longer after charging. Cutting edge electronics eliminate memory effect, the battery can be charged at any time without reducing the charging capacity. Constant fade free power throughout the discharge cycle. REDLITHIUM-ION™ 2.0Ah battery packs recharge in 40 minutes or less. 1 x 12 Volt M12 B2 REDLITHIUM-ION™ Battery Pack, fitted with sophisticated electronics (REDLINK™ Intelligence) and overload protection which prevents the user from damaging their cordless power tool investment in abusive situations. They have a temperature Management System which keeps the battery in ideal temperature range to provide maximum life.

The Milwaukee M12 B6 REDLITHIUM-ION™ Battery Pack is fitted with REDLINK™ Intelligence and overload protection, which prevents the user from damaging their tools. It has a temperature control cell frame that keeps the battery at an ideal temperature range to provide maximum life. There is a waterproof protection barrier, a rubber overmould and shock responsive separators to protect the battery from damage. With individual Cell Monitoring which ensures optimal charge and discharge for maximum life and discharge protection which prevents cell damage from over-discharge.They offer up to twice the run time, 20% more power and up to twice the recharges compared to other Lithium-Ion technologies or with previous Milwaukee battery technology. Results dependant on voltage, tool and application. Battery Capacity: 6.0Ah.Battery Chemistry: Li-ion.Voltage: 12 Volt.

The Milwaukee M12 B4 REDLITHIUM-ION™ Battery Pack has the following specification: Battery Capacity: 4.0Ah.Battery Chemistry: Li-ion.Voltage: 12 Volt.