This Trend 3/5 x 1/4 TCT Two Flute Cutter has the following specification: D: 9mm (23/64in)C: 19mmOL: 51mmShank Diameter: 1/4in

This Trend 3/50 x 1/4 TCT Two Flute Cutter has the following specification: D: 9.5mm (3/8in)C: 25mmOL: 58mmShank Diameter: 1/4in

This Trend 3/50 x 1/2 TCT Two Flute Cutter has the following specification: D: 9.5mm (3/8in)C: 25mmOL: 71mmShank Diameter: 1/2in

This Trend Intumescent Strip Cutter 348 is for routing the groove for the intumescent strip in a frame or door.An Intumescent strip is used to create an effective barrier to both fire and smoke.Alternative bearings can be chosen to suit other thicknesses of intumescent strip. The Trend 348 x 1/2 TCT Intumescent Cutter has the following specifications: Diameter: 40mm.Cutting Depth: 15mm.Cutter Width: 4mm.Bearing: 32mm.Shank Length: 41mm.Overall Length: 70mm.Shank Diameter: 1/2in.Fire Check: 30 minutes.

T.C.T.1/4in Shank.

T.C.T.1/2in Shank.

This Trend 3/4 x 1/4 TCT Two Flute Cutter has the following specification: D: 8mm (5/16in)C: 19mmOL: 52mmShank Diameter: 1/4in

This Trend 3/4 x 1/2 TCT Two Flute Cutter has the following specification: D: 8mm (5/16in)C: 19mmOL: 65mmShank Diameter: 1/2in

This Trend 337 x 1/2 tc is a one-piece tongue and groove set. The parts are inter-changed on the Arbor to alter the set up. It has a maximum timber thickness 22 mm and Minimum timber thickness 15 mm. Instructions for use are supplied. TCT. 1/2in Shank. D: 41 mm.C: 6.35 mm.C2: 10 mm.E: 22 mm.OL: 76 mm.

For use with Trend bearings and slotters. 1/4in shank. Includes: 1 x Arbor1 x Spacer 5mm3 x Spacer 3mm

This Trend 334 x 1/2 TCT Aquamac 21 Recessor, cutter, is designed for use with the seal in a wiping mode and comes complete with a guide bearing to reduce setting-up time and simplify machining operations. It is MEC mechanical feed only. Specifications: Size: 46.3mm diameter x 10.3mm cut shank 1/2in TCT. D: 46.3 mm.D2: 4.3 mm.C: 10.3 mm.C2: 2.7 mm.OL: 90 mm.B: 28.6 mm.

This Trend 3/22 x 1/4 TCT Two Flute Cutter has the following specification: D: 6.3mm (1/4in)C: 25mmOL: 56mmShank Diameter: 1/4in

This Trend 3/22 x 1/2 TCT Two Flute Cutter has the following specification: D: 6.3mm (1/4in)C: 25mmOL: 70mmShank Diameter: 1/2in

This Trend 3/2 x 1/4 TCT Two Flute Cutter produce a cleaner finish than the single flute cutters. This cutter is suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges.Corners will require a final trimming square with a hand chisel or a corner chisel. The Trend Two Flute Cutter is suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Specifications: Cut Diameter: 6.0mm (15/64in).Cut Depth: 16mm.Overall Length: 48mm.Shank Diameter: 1/4in.

This Trend 3/2 x 1/2 TCT Two Flute Cutter has the following specification: D: 6mm (15/64in)C: 16mmOL: 61mmShank Diameter: 1/2in

Trend HSS Two Flute Straight Cutters are made from a single piece of High Speed Steel, ground with a very fine edge. Generally HSS cutters are slightly less expensive than their TC grades, but can be more suitable for certain applications. Suitable for general grooving and rebating. Suitable for non abrasive materials, but will give a superior finish in soft timbers. Specification D: 6.3mm (1/4in)C: 28mmOL: 59mmShank Diameter: 1/4in

C = 19 mm D = 6.3 mm 1/4 in

This Trend 3/20 x 1/4 TCT Two Flute Cutter has the following specification: D: 6.3mm (1/4in)C: 16mmOL: 47mmShank Diameter: 1/4in

This Trend 3/1 x 1/4 TCT Two Flute Cutter has the following specification: D: 5mm (13/64in)C: 16mmOL: 56mmShank Diameter: 1/4in

The Trend 31/02 x 1/4 TCT Dovetail has the following specification: Cutter Angle: 103Cutting Diameter: 13.2mmCutting Depth: 13mmOverall Length: 55mmShank Diameter: 1/4in

This Trend 3/10 x 1/4 TCT Two Flute Cutter has the following specification: D: 3.2mm (1/8in)C: 11mmOL: 51mmShank Diameter: 1/4in

This Trend 3/08 x 1/4 TCT Two Flute Cutter has the following specification: D: 12.7mm (1/2in)C: 25mmOL: 55mmShank Diameter: 1/4in

This Trend 3/08 x 1/2 TCT Two Flute Cutter has the following specification: D: 12.7mm (1/2in)C: 25mmOL: 68mmShank Diameter: 1/2in

This Trend 3/03 x 1/4 TCT Two Flute Cutter has the following specification: D: 4.5mmC: 11mmOL: 51mmShank Diameter: 1/4in

This Trend 3/02 x 1/4 TCT Two Flute Cutter has the following specification: D: 6.3mm (1/4in)C: 19mmOL: 51mmShank Diameter: 1/4in

This Trend 3/01 x 1/4 TCT Two Flute Cutter has the following specification: D: 4mm (5/32in)C: 11mmOL: 65mmShank Diameter: 1/4in

TCT for use with drilling machines or routers.H.S.S.1/4in Shank.C = 9.5 mmD = 16 mmPlug Body Diameter. 16 mm

H.S.S.1/4in Shank.C = 16 mmD = 12 mmPlug Body Diameter. 22 mm

TC1/4in Shank. Plug Depth Max. 16mmPlug Depth Min. 12mmPlug Body Diameter. 12mm

The Trend 2/01 x 1/4 TCT Single Flute Cutter has the following specification: Cutting Diameter: 1.5mmCutting Depth: 6.0mmOverall Length: 43mmShank Diameter: 1/4in

Tooling : T.C.T.1/4in Shank.R = 10 mmD = 20 mmC = 18 mm

TC.1/2in ShankR = 12.7 mmD = 25.4 mmC = 15.9 mm

Tooling : T.C.T.1/4in Shank.R = 3 mmD = 6 mmC = 15 mm

Tooling : T.C.T.1/4in Shank.A = 60.D = 12.7mm.C1 = 10.3mm.C2 = 11.9mm.

Tooling : T.C.T.1/4in Shank.A = 45 D = 19.1 mmC1 = 9.2 mmC2 = 13 mm

T.C.T.1/3in Shank.Diameter. 19mmC1 = 9.2mm.C2 = 13.0mm.

These types of cutter are used for edging and chamfer cutting on man made fibre boards, natural timbers and plastics.Tools are offered to produce various angles for chamfering. Pin guarded cutters enable curved work to be undertaken, bearings running along the board edge or a template.Typical trade applications include sign making, freehand engraving, cabinet making and decorative joinery. T.C.T1/4in Shank.A = 45 C1 = 10 mmC2 = 14 mm

These type of cutters are used for edging, grooving, veining work and chamfer cutting on man made fibre boards, natural timbers and plastics. Tools are offered to produce various angles for engraving, chamfering and V-grooving. Typical trade applications include sign making, freehand engraving, cabinet making and decorative joinery. T.C.T.Shank 1/2in.A = 45 D = 38 mmC1 = 19 mmC2 = 26.5 mm

Template guide, suitable for Group E1 Routers. Size: 28.5 x 30 x 4mm.

1 x Faithfull Aluminium Wide Track Cutting Guide 1250mm (50in)

1 x Faithfull Aluminium Wide Track Cutting Guide 900mm (36in)

This Faithfull 4 Piece Router Bit Set is for use with kitchen worktop jigs. Tungsten carbide bits suitable for all routers with 1/2in collet. Contains: 3 x 1/2in Shank Straight: 12.7mm x 60mm, 12.7mm x 50mm(x2).1 x 1/4in Shank Flush Trim: 12.7mm x 25.4mm.

The Faithfull 35 Piece Router Bit Set with 1/2in shank. Tungsten carbide tips ensure long life and the storage case provides a safe place to store the bits when they are not being used. Different cutter shapes enable the creation of a variety of profiles, grooves and mouldings in softwoods, hardwoods, MDF or plywood. Shank Diameter: 12.7mm (1/2in) Contains: 1 x Straight: 3.2 x 14mm.1 x Straight: 6.5 x 20mm.1 x Straight: 10 x 25mm.1 x Straight: 12.7 x 20mm.1 x Straight: 12.7 x 25mm.1 x Straight: 19 x 20mm.1 x Dovetail: 12.7 x 8mm.1 x Dovetail: 15.0 x 12mm.1 x Panel Pilot: 6.5 x 30mm.1 x Guided Flush Trimmer: 10 x 13mm.1 x Guided Flush Trimmer: 10 x 25mm.1 x Guided Flush Trimmer: 12.7 x 12mm.1 x Guided Flush Trimmer: 12.7 x 25mm.1 x Guided Flush Trimmer: 19.1 x 25mm.1 x Mortising Cutter: 12.7 x 13mm.1 x Core Box: R3.2mm, 7 x 6mm.1 x Core Box: R6.3mm, 12.7 x 8mm.1 x Core Box: R6.3mm, 12.7 x 20mm.1 x 90 V-Groove: 12.7 x 10mm.1 x 45 Guided Chamfer: 30 x 14mm.1 x Guided Cove: R6.35mm, 25 x 10mm.1 x Guided Cove: R9.5mm, 30 x 14mm.1 x Guided Rabbeting Cutter: 30 x 6.5mm.1 x Guided Rabbeting Cutter: 30 x 8mm.1 x Guided Rabbeting Cutter: 30 x 10mm.1 x Guided Classical Cove: R8mm, 30 x 15mm.1 x Guided Wave Edge: 30 x 18mm.1 x Guided Beading: R12.7mm, 37 x 20mm.1 x Guided Double Roman: 32 x 14mm.1 x Guided Double Roman: 36 x 19mm.1 x Guided Roman Ogee: 25 x 12mm.1 x Guided Roman Ogee: 36 x 16mm.1 x Guided Rounding: R6.5mm, 25 x 12mm.1 x Guided Rounding: R10mm, 32 x 16mm.1 x Guided Rounding: R12.7mm, 36 x 20mm.

The Faithfull 30 Piece Router Bit Set with 1/4in shank. Tungsten carbide tips ensure long life and the storage case provides a safe place to store the bits when they are not being used. Different cutter shapes enable the creation of a variety of profiles, grooves and mouldings in softwoods, hardwoods, MDF or plywood. Shank: 6.3mm (1/4in). Contains: 1 x Straight: 5.0 x 12mm.1 x Straight: 6.0 x 20mm.1 x Straight: 8.0 x 20mm.1 x Straight: 10.0 x 20mm.1 x Straight: 12.0 x 20mm.1 x Straight: 14.0 x 20mm.1 x Straight: 16.0 x 20mm.1 x Straight: 18.0 x 20mm.1 x Straight: 20.0 x 20mm.1 x Dovetail: 12.7 x 13mm.1 x 90 V-Groove: 9.5 x 9mm.1 x 90 V-Groove: 12.7 x 9mm.1 x Core Box: R3.2mm, 6.0 x 6mm.1 x Core Box: R6.3mm, 12.7 x 10mm.1 x Classical Panel: 12.7 x 9mm.1 x Guided Flush Trimmer: 12.7 x 13mm.1 x 25 Guided Chamfer: 16.0 x 9mm.1 x 45 Guided Chamfer: 32.0 x 13mm.1 x Roman Ogee: R4mm, 25.0 x 12mm.1 x Guided Rabbeting Cutter: 28.6 x 13mm.1 x Guided Cove: R6.3mm, 22.0 x 12mm.1 x Guided Cove: R9.5mm, 28.0 x 12mm.1 x Guided Round Over: R3.2mm, 15.0 x 7mm.1 x Guided Round Over: R6.3mm, 22.0 x 12mm.1 x Guided Round Over: R7.9mm, 25.0 x 14mm.1 x Guided Round Over: R9.5mm, 28.0 x 14mm.1 x Guided Beading: R3.2mm, 16.0 x 8mm.1 x Guided Beading: R6.5mm, 22.0 x 12mm.1 x Guided Beading: R7.9mm, 25.0 x 14mm.1 x Guided Beading: R9.5mm, 28.0 x 15mm.

The Faithfull 15 Piece Router Bit Set with 1/2in shank. Tungsten carbide tips ensure long life and the storage case provides a safe place to store the bits when they are not being used. Different cutter shapes enable the creation of a variety of profiles, grooves and mouldings in softwoods, hardwoods, MDF or plywood. Shank: 12.7mm (1/2in). Contains: 1 x Straight: 3.2 x 14mm.1 x Straight: 6.5 x 20mm.1 x Straight: 12.7 x 25mm.1 x Straight: 19.0 x 20mm.1 x Dovetail: 12.7 x 8mm.1 x Panel Pilot: 6.5 x 30mm.1 x Guided Flush Trimmer: 12.7 x 12mm.1 x Mortising Cutter: 12.7 x 13mm.1 x Core Box: R3.2mm, 7 x 6mm.1 x 90 V-Groove: 12.7 x 10mm.1 x 45 Guided Chamfer: 30 x 14mm.1 x Guided Cove: R9.5mm, 30 x14mm.1 x Guided Rabbeting Cutter: 30 x 10mm.1 x Guided Roman Ogee: 25 x 12mm.1 x Guided Rounding: R10mm, 32 x 16mm.

The Faithfull 12 Piece Router Bit Set with 1/4in shank. Tungsten Carbide tips ensure long life and the storage case provides a safe place to store the bits when they are not being used. Different cutter shapes enable the creation of a variety of profiles, grooves and mouldings in softwoods, hardwoods, MDF or plywood. Shank: 6.3mm (1/4in). Contains: 1 x Dovetail: 12.7 x 13mm.1 x Straight: 6 x 20mm.1 x Straight: 12 x 20mm.1 x Straight: 16 x 20mm.1 x Flush Trim: 12.7 x 13mm.1 x Rounding Over: R7.9mm, 25 x 14mm.1 x Rounding Over: R9.5mm, 28 x 14mm.1 x Roman Ogee: R4mm, 25 x 12mm.1 x Core Box: R6.3mm, 12.7 x 10mm.1 x Cove: R6.3mm, 22 x 12mm.1 x 45 Chamfer: 32 x 13mm.1 x 90 V-Groove: 12.7 x 9mm.

A bearing guided tungsten carbide tipped cutter designed to produce a decorative edge when working on MDF, softwoods, hardwoods, and plywood. 1/4in Shank Radius: 3.2mm Diameter: 22mm

The Faithfull Router Bit TCT 45 Chamfer is a bearing guided tungsten carbide tipped cutter producing a 45 chamfer to a maximum depth of 10mm. It is suitable for use on softwood, hardwood and all man-made boards. Specification: Shank Size: 1/4in.

Type: Flush Trimmer 2 flute Cutting Diameter: 6.3 mm 1/4in Cutting Length: 25.4 mm Shank Diameter: 1/4in

Cutting Diameter: 6.3 mm 1/4in Type: Flush Trimmer 2 flutes Cutting Length: 12.7 mm Shank Diameter: 1/4in

Cutting Diameter: 10mm Cutting Length: 18mm. Radius: 5mm Shank Diameter: 1/4in

Cutting Diameter: 6mm Cutting Length: 15mm. Radius: 3mm Shank Diameter: 1/4in

Designed to meet the needs of both the professional tradesman and the home handyman.All are Tungsten Carbide Tipped, to ensure longevity of working life, coupled with a good quality finish to the work.This cutter is to be used for bevelling and chamfering. Cutting Angle Length C 13.0mmOverall Diameter D 19.1mmCutting Angle 45 Shank Diameter 1/4in

These Faithfull Router Bits are designed to meet the needs of both the professional tradesman and the home handyman.All are Tungsten Carbide Tipped, to ensure longevity of working life, coupled with a good quality finish to the work.Ovolo produces a 2 stepped rounded profile along the edge of the material. The guide pin enables the cutter to follow intricate shapes. This rounding over bit produces a rounded profile along the edge of the material it differs from the Ovolo cutter by producing a single step only. Cutting Depth. 15.8 mmCutting Radius R 9.5 mm Shank Diameter. 1/4in

Radius: 9.5mmCut Diameter: 32mmCut Depth: 16.5mmShank: 1/4in

Radius: 6.3mmCut Diameter: 25.4mmCut Depth: 13.3mmShank: 1/4in

Type: Straight Cutter Cutting Diameter: 10.0 mm 25/64in. Cutting Length: 35 mm. Shank Diameter: 1/2in.

Cutting Diameter: 10.0 mm 3/8in. Cutting Length: 19 mm. Shank Diameter: 1/4in.

Cutting Diameter: 6.3 mm 1/4in. Cutting Length: 16 mm. Shank Diameter: 1/4in.

Cutting Diameter: 12.0 mm 15/32in. Cutting Length: 19 mm. Shank Diameter: 1/4in.

Cutting Diameter: 11.0 mm 7/16in. Cutting Length: 25 mm. Shank Diameter: 1/4in.

Cutting Diameter: 8.0 mm 5/16in. Cutting Length: 19 mm. Shank Diameter: 1/4in.

Cutting Diameter: 25.0 mm 63/64in. Cutting Length 25 mm Shank Diameter: 1/4in.

Cutting Diameter: 22.0 mm 7/8in. Cutting Length 19 mm Shank Diameter: 1/4in.

Cutting Diameter: 6.0 mm 15/64in. Cutting Length: 16 mm. Shank Diameter: 1/4in.

Cutting Diameter: 25.4 mm 1in. Cutting Length 25 mm Shank Diameter: 1/2in.

Cutting Diameter: 20.0 mm 25/32in. Cutting Length 25 mm Shank Diameter: 1/4in.

Cutting Diameter: 15.0 mm 19/32in. Cutting Length 25 mm Shank Diameter: 1/4in.

Cutting Diameter: 6.3 mm 1/4in. Cutting Length 25 mm Shank Diameter: 1/4in.

Cutting Diameter: 12.7 mm 1/2in. Cutting Length 32 mm Shank Diameter: 1/2in.

Cutting Diameter: 9.5 mm 3/8in. Cutting Length 25 mm Shank Diameter: 1/4in.

Cutting Diameter: 10.0 mm 3/8in. Cutting Length 19 mm Shank Diameter: 1/2in

Cutting Diameter: 5.0 mm 13/64in. Cutting Length: 16 mm. Shank Diameter: 1/4in.

Cutting Diameter: 9.0 mm 11/32in. Cutting Length 19 mm Shank Diameter: 1/4in.

Cutting Diameter: 7.0 mm 9/32in. Cutting Length 19 mm Shank Diameter: 1/4in.

Cutting Diameter: 12.7 mm 1/2in. Cutting Length 25 mm Shank Diameter: 1/4in.

Cutting Diameter: 15.9 mm 5/8in. Cutting Length: 50 mm. Shank Diameter: 1/2in.

Cutting Diameter: 19.0 mm 3/4in. Cutting Length: 25 mm. Shank Diameter: 1/4in.

Cutting Diameter: 18.2 mm 23/32in. Cutting Length: 21 mm. Shank Diameter: 1/4in.

Cutting Diameter: 15.9 mm 5/8in. Cutting Length: 19 mm. Shank Diameter: 1/4in.

Cutting Diameter: 12.7 mm 1/2in. Cutting Length: 63 mm. Shank Diameter: 1/2in.

Cutting Diameter: 12.7 mm 1/2in. Cutting Length: 50 mm. Shank Diameter: 1/2in.

Cutting Diameter: 12.7 mm 1/2in. Cutting Length: 19 mm. Shank Diameter: 1/4in.

Cutting Diameter: 4.0 mm 5/32in. Cutting Length: 11 mm. Shank Diameter: 1/4in.

Supplied with two bearings 9.5 mm and 12.7 mm to enable use as either ovolo or rounding over bits. Radius: 6.3mmCut Diameter: 25.4mmCut Depth: 13mm2 x Bearings supplied 9.5 x 12.7 mmShank: 1/4in

Supplied with 2 bearings 9.5 and 12.7 mm to enable use as either ovolo or rounding over bits.Radius: 9.5mmCut Diameter: 32mmCut Depth: 16mmShank: 1/4in

Single Flute Cutting Diameter 1/8in - 3.2mmCutting Length. 10mmShank Diameter. 1/4in

The DEWALT DE6952 Replacement Router Collet is suitable for the following DEWALT machines: DW609, DW613, DW614, DW615, DW620, DW621/K, D26204/K, D26200 D26203 routers. Collet Size: 8mm.

12.70 mm (1/2in) Collet to fit DEW625EK Router.

8 mm Collet to fit DEW625EK Router.

6.35 mm (1/4in) Collet to fit DEW625EK Router.

Makita Wet Filter For Dvc750L

Trend Snappy Tool Holder is supplied with the Snappy Quick Change Chuck for fast, efficient bit swaps ensuring increased productivity and performance. Includes a selection of accessories for drilling in wood, masonry and steel, plus specialist bits for specific tasks such as lock fitting and metalwork applications. Supplied in a heavy-duty fabric tool holder. Contains: 1 x Standard Quick Chuck4 x Masonry Bits: 5, 6, 7 and 8mm2 x Drill Bit Guides: No.6 and No.87 x Drills: 1, 2, 3, 4, 5, 6 and 7mm2 x Auger Bits: 10 and 13mm5 x Flat Bits: 16, 19, 22, 25 and 30mm3 x Drill Countersinks: 2.5, 3.25 and 3.5mm1 x Deburrer/countersink1 x Hole Enlarger3 x Square Drive Adaptors: 1/4, 3/8 and 1/2in3 x 50mm Pozidriv Bits: PZ1, PZ2 and PZ34 x Nut Drivers: 6, 8, 10 and 12mm A/F23 x Insert Bits: Slotted(x5), Pozidriv(x3), Phillips(x3), Hex(x6) and TORX(x6)1 x Magnetic Bit Holder

The Quick Chuck will fit any power drill that uses a standard 9.5 mm (3/8in) key or keyless chuck. Attachments such as the snappy range or direct drive 1/4in screwdriver bits will then snap in and out without a chuck key. The Quick Chuck has six flats on the shank to ensure non-slippage in the chuck.

For cutting 3/8 inch (9.5mm) Plugs.

For cutting 1/2 inch (12.7mm) Plugs

Magnetic screwdriver holder. Designed to hold longer screws securely on to the screwdriver bit, with an extra magnetic ring. Accepts 25 mm insert bits and has an adjustable barrel.Supplied with one No 2 pozi bit.

The Trend SNAP/HKLC/6 Keyless Chuck can be used in quick chucks and impact drivers to hold parallel shank drills bits up to 1/4 inch.Clamping capacity: 0.8 mm (1/32 inch) to 6 mm (1/4 inch). Enhanced gripping power when compared to traditional key type drill chucks. Lightweight with plastic body. Fitted with snappy shank 1/4 inch hex shank adaptor. Specifications: Shank Diameter: 1/4in hex. Clamping Capacity: 0.8-6mm (1/32-/14in).

The HSS drill bits are gripped by a spring steel collet into the hex shaft. The hex shanks snap into the quick chuck. The hex collar is supplied in the sets to enable drills to be removed with two spanners.7 piece drill set.1.5, 2, 2.5, 3, 4, 5 and 6mm.Supplied in a storage tube.

The Trend Snappy Flip Over Driver Set - 4 Piece Set - is for tasks involving multiple piloted countersink and screwing work, the Trend Snappy Flip Bits are designed to speed up the task using a double-ended driver and countersink combination. A very fast and efficient way to pilot, countersink and drive screws by simply flipping the bit to move from drilling to driving, increasing productivity and efficiency across all working practices.They are supplied with a quick-change shank for fitting into Trend Snappy Quick Chuck with three double ended screwdriver and piloted countersinks for No6, 8 and 10 gauge screws. The drill lengths can be adjusted for different piloting depths with each one fitted with No 2 Pozi drive insert bits. Specifications: Main Body Adaptor Diameter: 17mm.Overall Length: 102mm.