The DEWALT DPC6MRC Mini Roll Cage Compressor is a portable, high power to weight ratio compressor designed for small and medium tools. Powerful enough to power up to 30 brad nailer shots per minute. It has a durable oil free motor that provides extended maintenance-free operation. Other features include anti-slip feet for greater stability, integrated storage for convenience and an LED on/off switch to prevent accidental misfire. Ideal for second fix nailing, short burst cleaning and household use. Specification Voltage: 230/240 Volt.Input Power: 1.5 HP, 1,100 Watt.Max Operating Pressure: 116 PSI, 8 Bar.Displacement: 170 L/min.Air Delivery: 75 L/min.Tank Capacity: 6 litre.Noise LWa 1sd/Uncertainty:97/1.5dB. Noise LPa 1sd/Uncertainty: 77dB.Dimensions (WxLxH): 445 x 360 x 400mm.Weight: 12.8kg.

DEWALT DPC10QTC Mid Pressure Super Quiet Compressor 1100 Watt 110 Volt Version.

DEWALT DPC10QTC Mid Pressure Super Quiet Compressor 1100 Watt 240 Volt Version.

The DEWALT DCC1054T2 FlexVolt XR Compressor is supplied with: 2 x 18/54V 6.0/2.0Ah FlexVolt Li-ion Batteries1 x DCB118 Fast Charger

The DEWALT DCC1054N FlexVolt XR Cordless Compressor comes as a bare unit, NO battery or charger.

The Bostitch TU-216-2330K-E Pneumatic Headless Pinner is a compact 23 gauge headless pinner which is specially designed for fine detail work in the construction industry and industrial use. Benefits include a secondary safety trigger to reduce the risk of accidental start, auto adjusting magazine for varying pin lengths together with a rear exhaust to direct air away from the nose piece. Specification Magazine Capacity: 200 (max.)Nail Range: 15-30mmNail Diameter: 0.6mmOperating Pressure: 70-100 PSI, 4.8-7 barDimensions (LxWxH): 230 x 198 x 40mmWeight: 0.984kg

The Bostitch SX1838-E stapler has user-friendly features such as dial-a-depth for quick countersinking adjustments and a selectable trigger system. It will make light work of construction stapling applications. This rugged tool drives staples from 15 to 38 mm length and offers extreme reliability and durability, yet with low maintenance due to the oil free design. Comes complete with carry case. Specification Magazine Capacity: 100 (max).Fires: SX Series: 12-38mm and Crowns: 5.6mm.Operating Pressure: 70-120 PSI, 4.8-8.3 Bar.Dimensions (LxWxH): 235 × 240 × 70mm.Weight: 1.34kg.

The SB-HC50FN Concrete Block Nailer is a 15 gauge Finish Nailer which is capable of driving high carbon zinc dichromate hardened nails into concrete blocks to 7 newtons. Designed to drive tungsten hardened nails into almost all forms of concrete block, the SB-HC50FN can fix door liners into block and gripper rods into floor screeds. It is not recommended that this tool is used to drive nails into any form of strengthened concrete or engineered and glazed bricks. Specification Magazine Capacity: 100 nails.Fires: HCFN Series: 20-50mm.Operating Pressure: 70-100 PSI, 5-7bar.Weight 1.98kg.

The Bostitch PN50-E Pneumatic Palm Nailer is a small impact palm nailer which is half the size of the old PN100. It can drive the most common bulk finish, framing and timber nails into confined areas and has an adjustable swivel connection. Specification Magazine Capacity: 1 (max). Fires: Bulk Series: Diameter: 8mm (max).Operating Pressure: 79-124 PSI, 5.5-8.6 Bar. Weight: 0.55kg.

The high capacity N66C-2-E coil nailer is designed with a tough, resilient housing but uses light weight materials, making this tool ideal for all day use. The fastener depth adjustment gives ultimate control, and the tool is also compatible with both plastic and wire collated nails for maximum flexibility. Specifciation Magazine Capacity: 225 (max).Nail Length: N Series: 32-64mm.Nail Diameter: N Series: 2.03-2.5mm.Nail Head: 4.5mm.Operating Pressure: 70-120 PSI, 4.8-8.3 Bar.Dimensions (LxWxH): 267 x 270 x 118mm.Weight: 1.99kg.

The Bostitch MCN150-E Strap Shot Metal Connecting Nailer is incredibly lightweight and simple to use and maintain. Compact metal connecting nailer with Sequential Trip Trigger, adjustable exhaust. It is designed to allow access to even the tightest corners, and the innovative exposed-tip design positions the fastener directly into the connector plates holes for faster and more accurate positioning than ever before. The award winning StrapShot MCN150-E is the most advanced pneumatic positive placement nailer on the market. The compact StrapShot is designed to work where other nailerscan't, allowing access to even the tightest corners, and the innovative exposed-tip design positions the fastener directly into the connector plates holes for faster and more accurate positioning than ever before. Ideal for Joist Hangers, roof trusses, metal connectors and other manufacturing uses. This nail gun uses the 3.75 x 38 mm PT MCN Galvanised Nails. Specification Magazine Capacity: 29 (max).Nail Head: 7.2mm.Nail Length: 38mm. Nail Diameter: 3.3-3.8mm.Operating Pressure: 70-120 PSI, 4.1-8.4 Bar.Air Consumption Per Shot: 5.6 bar 1.9 Litre.Weight: 1.95kg.

ISO VG100 SAE 30 1 Litre Compressor Oil

The Bostitch 16 gauge FN1664-E finish nailer represents great value for money with the design incorporating class leading features. The FN1664-E has a light weight magnesium construction body, no-nail lockout, rear exhaust and selectable trigger without compromising the high durability and build quality that has made Stanley Bostitch the market leader in performance pneumatic tools for construction. Specification Magazine Capacity: 110 (max).Fires: SB16 Series: 25-64mm.Operating Pressure: 70-120 PSI, 4.8-8.3 Bar.Weight: 1.7kg.

The Bostitch F33PTSM-E framing nailer features a short magazine for ease of use in tight spaces and has a Dial a Depth function. The paper tape nails are compatible with pazlode (IM350) framer. The powerful engine is capable of driving stick nails upto 90mm in length, whilst the lightweight magnesium body makes it comfortable to use all day long. It has CE compliant sequential trip fitted, for safer working on-site, a No-mar tip to prevent wood bruising and an adjustable exhaust to direct air away from workpiece and operator. Ideal for: Cases, Roof Trusses, Stud Walls and Timber Framing. Uses PT Fastner range. Specification Magazine Capacity: 50 (max).Nail Length: PT Series/WW 33 Series: 50-90mm Nails.Nail Diameter: PT Series/WW 33 Series: 2.5-3.3mm.Operating Pressure: 70-120 PSI, 4.8-8.3 Bar.Collation Angle: 33.Weight: 3.5kg.

This latest evolution of the best selling N88WW framer brings even more power to job with a 5% increase in driving power together with a weight reduction. The waisted body design gives a much improved sightline to the tool nose. The handle has been lowered to improve balance and comfort in use; along with other design improvements these features will keep this tool firmly at no 1 in the pneumatic framing market. Its use of 28 degree wire collated nails keeps consumable costs to a minimum. Use for all your framing and first fix applications. Specification Magazine Capacity: 90 (max).Nail Range: 50-90mm First Fix NailsOperating Pressure: 70-120 PSI, 4.8-8.3 Bar.Driving Power: 1050 inch/lbs.Weight: 3.5kg.

The Bostitch F21PL-E Roundhead MCN Stick Nailer has a waisted body design to improve sightline and a repositioned handle to give balance and comfort in use. Using 21 plastic collated framing nails hot dip galvanized to 50 microns and specially designed positive placement nails. This tool is perfect for all framing and first fix applications where good corrosion resistance is required and of course anywhere you need to drive a nail through a pre formed hole. Comes complete with two noses, enabling a five second change between modes via the push button depth control button. Perfect for all framing and first fix applications. Specification Magazine Capacity: 50 (max).Nail Length: PL Series: 45-90mm, MCN Series: 38-65mm.Nail Diameter: PL Series: 2.5-3.3, MCN Series: 4-4.1mm.Operating Pressure: 70-120 PSI, 5-8.25 Bar.Collation Angle: 21.Weight: 3.7kg.

Bostitch CPACK30 is a fully assembled air line hose on a swivelling hose reel, supplied with 6.3mm FPT (female pipe thread) plug and a 6.3mm FPT (female pipe thread) socket. Length: 12.5mm hose x 30 metresMax. Operating Pressure: 241 psi, 15 bar

The Bostitch CPACK15 Combo Pack comes with everything you need to hook a Bostitch Pneumatic tool to a compressor. Contains: 1 x 15.5mm x 15m Air Hose.1 x Pipe Thread Seal Tape.1 x Bottle of Pneumatic Tool Oil.1 x 6.3mm Female Pipe Thread Plug (FPT)1 x 6.3mm Male Pipe Thread Plug (MPT)1 x 6.3mm Female Pipe Thread Socket (FPT)1 x 6.3mm Male Pipe Thread Socket (MPT)1 x Blow Gun. Max Operating Pressure: 150 PSI, 10.5 Bar.

The Bostitch C24-U portable compressor is a compact and portable unit. It has a powerful 2.2hp / 230 litres per minute motor and has up to 40% more air displacement than other 24 litre models. It has an oil lubricated pump for long term durabilty and performance, and the oversized twin tank/output pressure gauges complete with integral easy to adjust air regulator makes setting for the correct working pressure quick and easy. The ball style drain valve is designed for easy access and better durability vs. threaded drain valves. Specifcation Voltage: 110/115.Max. Pressure: 10 bar (145 psi)Displacement: 230 L/min.L/min. FAD @7 bar: 100.Compressor Noise: 72db @ 1m.Noise: 94db @ 1m.Output: 2.5HP/1.8kw.Tank Capcity: 24 litre.

The Bostitch BT1855-E Pneumatic Brad Nailer has a selectable trigger system and oil-free engine together with a moulded handle design to give maximum performance with improved durability and tool balance. With a host of features to meet the demands of todays construction users. It comes complete with 1,000 fasteners and a heavy-duty carry case. Specification Magazine Capacity: 100 (max).Fires: BT13 Series: 15-55mm.Nail Head: 2mm (max).Nail Length: 15-55mm.Operating Pressure: 70-120 PSI/4.8-8.3 Bar.Weight: 1.23kg.

The Bostitch 21684B-E wide crown stapler is a professional grade headless pinner with a small compact design for better access to the workspace, variable power control and a secondary safety trigger. Suitable for furniture manufacture, ideal for moulding and trim work. Weight 0.83 kg Dimensions: Length 221 mm × Width 150 mm × Height 40 mm Staple Length 4 mm (min) - 16 mm (max) Diameter 0.5 mm (min) - 1 mm (max) Magazine Capacity 125 (max) Operating Pressure PSI 80 - 120 BAR 4.9 - 8.4 Air Consumption Ltr.per shot @ 5.6 bar 0.17 Noise LPA 1sd 64.4 LWA 1sd 74.0 LPA 1s, 1m 61.0 Vibration m/s2

The Bostitch 19PM P.C.L Male Hose Connector is NOT compatible with CEJN320. Has a 1/4in B.S.P. fitting.

CEJN Euro nipple.1/4 inch female.

The Bostitch Standard Male Hose Connector for use with Stanley Bostitch range of Compressors. CEJN 320 Series with 1/4in B.S.P. fitting.

The Bahco BP825 Reversible Air Drill has a composit housing and rubber grip handle for optimal user comfort. It also comes with a removable, adjustable second handle. The forward/reverse lever allows for a quick and easy change of direction. An air exhaust in the handle allows for a clean and pleasent operation. Whilst the quick chuck allows for quick bit changes. Specification Power: 220 W.Air inlet BSP: 1/4in.Bar: 6.3.Chuck Size: 13mm.No Load Speed: 450/min.Air Consumption: 105l/min.Recommended Hose Size: 10mm.Weight: 1.53kg. Sound pressure level: 88 dBA.Vibration level: 2.5m/s.

The Bahco Impact Wrench has a durable insulated composite housing with a twin hammer mechanism and a three-step power regulator. Its 360 swivel connection helps avoid hose coiling. Supplied in a robust plastic case with a foam inlay that fits into the Bahco T-module system T12. Contains: 1 x BP815 1/2in Impact Wrench1 x 1/4in Threaded Male Connector11 x Impact Sockets: 10, 11, 12, 13, 14, 15, 17, 19, 21, 22, and 24mm Specification Air Inlet BSP: 1/4in.Square Drive: 1/2 Inch.Minimum Hose Diameter: 10mm.Working pressure: 6.3bar.No Load Speed: 7,000/min..Impacts Per Minute: 1,150/bpm.Torque Range: 320-620Nm.Max. Torque (Reverse): 825Nm.Air Consumption: 130 l/min.Vibration Level: 5 mm/s-.Hose Length: 10m.Length: 192mm.Weight: 1.95kg.

Bahco BP218 Air Blow Gun has a brass inlet and meets the OSHA requirements. It has a 1/4in connector. SpecificationAir Inlet BSP: 1/4in.Output pressure: 2.07bar.Working pressure: 6.3bar.Fluid delivery: 190-250 ml/min Airflow: 158 l/min.Maximum Air pressure input: 11 bar Length: 210mm.Weight: 0.15kg. Sound pressure level: 80 dBA.

The Record Power RPT7400119 is an A2 extra fine solid carbide point that is ideal for glass and steel. It will fit Record Power 7417070 Professional Engraver.

The Record Power RPT7400041 is an A4 heavy-duty solid carbide point that is ideal for hardened steel. It will fit Record Power 7417070 Professional Engraver.

The Olympia Tools Multi-Tool is a highly versatile machine that can perform a wide variety of tasks: sawing, sanding, scraping and much more. Fitted with a high-powered motor and an easy to control variable speed wheel. The body features soft grip areas for increased comfort and control. Supplied with: 1 x Sanding Pad, 8 x Sanding Sheets: 4 x P60, 4 x P80, 1 x Plunge Cut Blade, 1 x Scraper and 1 x Hex Key. Specification: Input Power: 300WNo Load Speed: 15,000/20,000/min.Oscillation Angle: 3.5Weight: 1.00kg

The Einhell TE-MG 300 EQ Multi-Tool is a practical all-rounder for ambitious DIY enthusiasts. Wood, plastic and even metal can be sawed reliably, wood can also be sanded. Even grouting from between tiles can be removed easily. Equipped with a powerful 300W motor and variable speed electronics, allowing you to customise the speed to the material being worked on. The constant electronics provide consistent power and a quick-release chuck enables you to change equipment without additional tools, in minimum time. The tool chuck has 12 settings and a magnetic tool fixation. The tool body is fitted with a comfortable soft grip. Supplied with the following accessories: 1 x Dust Extraction Device for fitting without any additional tools1 x Dust Extraction Adaptor1 x Plunge-Cut Saw Blade for wood and plastic (HCS)1 x BIM Plunge-Cut Saw Blade for metal1 x HSS Segment Saw Blade for wood, plastic and soft metal1 x Diamond Segment Saw Blade for tile joints1 x Triangular Grinding/Sanding Plate6 x Sheets of Abrasive Paper: 3 x P60 3 x P1201 x Scraper Supplied in a convenient transport/storage case. Specification: Input Power: 300WOscillating Speed: 22,000-40,000/min.Oscillating Angle: 3.2Sandpaper Size: 93 x 93 x 93mmWeight: 1.54kg

The Einhell TE-MG 200CE Multi-Tool is a high-quality, compact and ergonomic tool for sawing, sanding, scraping and much more. The electronic speed control ensures smooth starting and enables the power to be adjusted exactly to the particular task. The soft grip provides a non-slip hold, while the extremely slim design makes it the ideal helper in hard-to-reach places. The dust extractor plus adaptor can be fitted without tools and keeps the air clean at all times, even during jobs with intensive dust development. The tool chuck of this versatile tool is adjustable, up to 12 settings for mounting various tools. A cable clip is provided for securing the wound-up cable neatly and safely in place after use. Comes with: 1 x Delta Sanding Disc, 6 x Abrasive Papers, 1 x Scraper, 1 x Plunge-Cut Blade for Wood and 1 x Hex Key. Specification: Input Power: 200WNo Load Speed: 30,000-42,000/min.Oscillating Angle: 3Sandpaper Size: 93 x 93 x 93mmWeight: 1.0kg

The Einhell TC-MG 220/1 E Multi-Tool is a compact and highly versatile machine that can perform a variety of tasks: sawing, sanding, scraping and much more are quick and easy to perform with this handy all-rounder. The electronic speed control ensures that the power is exactly tailored to your operation. It has a robust aluminium driveshaft that has been designed for intensive use. The soft painted housing mount and mounted soft grip make it comfortable and easy to grip. Supplied with: 1 x Delta Sanding Disc With Dust Extraction1 x Sanding Paper1 x Scraper1 x RAID-Blade For Wood1 x Dust Extraction Adapter2 x Allen Keys Specifcation Input Power: 220WNo Load Speed: 15,000-22,000/min.Oscillation Angle: 3Grinding Area: 90 x 90 x 90mmWeight: 1.8kg

The Einhell TC-MG 135 E Grinding Engraving Tool is a high-quality, compact machine, which is suitable for an enormous number of different applications for drilling, cutting, grinding and brushing thanks to its extensive range of accessories. The spindle lock enables you to remove the various attachments quickly and change them easily. Electronic speed control ensures smooth starting and enables the power to be adjusted exactly to the particular task. Features a flexible shaft and a soft grip, ergonomic design. During use, the tool can also be conveniently mounted on the telescopic stand and related hook. Supplied with an extensive 189 piece accessory set for grinding, drilling, cutting and much more. Supplied with: 1 x Telescopic Table Clamp Stand, 1 x Key For Tool Change 1 x Transport, 3 x Holders For Felt Polishing Disc, 1 x Brush Insert Storage Case. The 189 Piece Accessory Set, contains the following: 12 x Special Corundum Mounted Points6 x Milling Pins22 x Sanding Tools (14 x Small 8 x Tall)34 x Adaptors For Sanding Tool (20 x Small 14 x Tall)3 x Adaptors for Miniature Grinding Cutting Discs4 x Special Corundum Miniature Grinding Discs40 x Miniature Cutting Discs14 x Miniature Felt Polishing Discs (11 x Flat 3 x Long)46 x Round Sanding Papers6 x HSS Drill Bits Specification Input Power: 135 Watt.No Load Speed: 10,000-35,000/min.Length: 340mm.Weight: 0.67kg.

DEWALT DWE315KT Multi Tool Quick Change Kit TSTAK 300 Watt 110 Volt Version.

DEWALT DWE315KT Multi-Tool Quick Change Kit TSTAK 300 Watt 240 Volt Version.

The DEWALT DWE315B Corded Multi-Tool is fitted with a powerful motor and a variable speed trigger for complete control. For ease of use, it features quick accessory change and adjustment, no hex key required. The body features superior ergonomics, the soft comfort grip helps to reduce user fatigue whilst improving control. It is supplied with a 28 piece accessory set that contains: 1 x Rigid Scraper1 x Sanding Platen25 x Sanding Sheets (Assorted Grades)1 x Dust Extraction Adaptor Plus: 1 x Universal Adaptor2 x Hex Keys: 3mm and 5mm1 x Tool Bag Specification: Input Power: 300WNo Load Speed: 0-22,000/min.Weight: 1.5kg

Pointed forming heads for use with 1500763 1500743 Engravers.

The Brennenstuhl 1500763 Engraver kit which is suitable for all metals from soft to extra hard. The modelling tools (supplied) are ideal for use with soft metals; such as copper, tin and aluminium. Supplied with: 1 x Adaptor for Spare Stylus, 1 x Sintered Carbide Stylus, 1 x Diamond Tip, 1 x Ball Tip Modelling Tool and 1 x Pointed Modelling Tool. Specification Input Power: 25W

Brennenstuhl 1500743 Engraver for engraving soft metal, copper, tin and aluminium. Supplied with an interchangeable sintered carbide stylus. Specification Input Power: 25W

Sintered Carbide Stylus for use with the Brennenstuhl Engravers.

Replacement Diamond Stylus to suit 1500763 1500743 engravers.

The Black and Decker MT300KA Oscillating Tool features a Superlok™ tool-free accessory change system for faster job completion. It has a robust jam pot design, which provides durability and easy servicing. The slim back handle design and soft grip provides greater comfort for longer use. The variable speed provides optimum control on all tasks. The Oscilating Tool has a sanding platen which includes integrated dust extraction for a cleaner working environment. The tooled accessory adaptor provides additional versatility to fit Bosch, Einhell and Worx accessories in a tooled manner. Applications: A multitude of finishing tasks, including cutting, sanding, removal and scraping. Cutting wood, metal, plasterboard, laminate flooring, plastics and fiberglass. Sanding woods, laminate flooring, stone, breezeblocks, plasterboard and for polishing and rust removal. Scraping linoleum flooring tile adhesive, ceramic tile adhesive, removal of linoleum, carpet tiles and sealant removal. Comes with: 1 x Sanding Pad with Integrated Dust Extraction. 1 x Precision Plunge Cut Blade. 1 x Segmented Flush Cut Blade. 1 x Rigid Scraper Blade. 1 x Flexible Scraper Blade. 6 x Sanding Sheets 60, 80 and 120 grit1 x Tooled Accessory Adapter to fit Bosch, Einhell and Worx Tooled Accessories. Specification Input Power: 300 Watt.No Load Speed: 10,000-22,000/min.Cable Length: 3m.Sound pressure (LpA): 90 dB(A).Weight: 1.58kg.

The RIDGID CA-25 Micro SeeSnake Hand Held Inspection Camera has been designed for visual detection, diagnosis, and confirmation in hard to reach areas. The rugged 17mm aluminium camera head combined with a one-handed pistol grip design makes this tool ideal for the most demanding environments. A crisp 2.4in colour LCD screen with 180 digital rotation allows for easy viewing, aided by 4 adjustable LCD's in the camera head. It also features video out, cable included, for transferring live images to external devices. Supplied with: 4 x AA Batteries, 1 x RCA Cable, 1 x Mirror, 1 x Magnet Hook and 1 x Carry Case.

The Ridgid SeeSnake nanoReel is ideal for inspecting places where previously only bore scopes were able to reach. Suitable for boiler tubes, supply lines, sprinkler systems and a wide array of speciality applications. Featuring a small 15.5mm camera head that is capable of tight turns, 90 arcs from 30mm upwards without difficulty. The unit is lightweight and compact, allowing easy transport and efficient storage. Offers multiple monitor compatibility, can be used with a SeeSnake monitor or micro CA-300 and microEXPLORER™ Digital Inspection Cameras. The inner drums are interchangeable to cover different applications.

The RIDGID CA-150 Micro SeeSnake Hand Held Inspection Camera can capture up to 20 still images during inspections to playback on screen later. The rugged 17mm aluminium camera head combined with a one-handed pistol grip design makes this tool ideal for the most demanding environments. With 4 super bright LED lights to provide increased illumination for excellent visibility in even the darkest inspection areas. A crisp 3.5in colour LCD screen with 180 digital rotation, provides upright images for better problem analysis without spending time or effort positioning the camera head. Supplied with: 4 x AA Batteries, 1 x RCA Cable, 1 x Mirror, 1 x Magnet Hook and 1 x Carry Case.

The RIDGID NaviTrack Scout Locator is designed to solve the most demanding remote transmitter (sonde) location using multi-directional locating technology. The multi-directional antenna technology sees the entire signal at all times. Simply maximise the signal strength and you have found the target. No nulls or false peaks to complicate the locate. This locator verifies the locate position using a micro-mapping display to mark distinctive poles in front of and behind the target, insuring an accurate locate. Depth is automatically calculated and displayed when over the target. Meets EN 55022 Class B requirements. Specification Power Source: 4 x C-Cell Batteries (Not Included).Battery Life: Approximately 24 Hours.Weight: 1.4kg. Standard Frequencies Sonde: 16 Hz, 512 Hz, 640 Hz, 874 kHz and 33 kHz.Line Trace: 128 Hz, 1 kHz, 8 kHz and 33 kHz.Passive AC Line Trace: 60 Hz, 50 Hz.

The RIDGID Battery Remote Transmitter (512 Hz Sonde) can be attached to a drain cleaning cable or a water jet hose to locate the Remote Transmitter in a line. A flashing LED indicates that the sonde is transmitting Meets EN 55022 Class B requirements. Powered by 1 x AAA Battery (Not Inculded).

The Milwaukee M12 IC AV3 Inspection Camera has a removable screen, that can be removed from the main console and still work, up to a range of 10m. The camera head offers 4x zoom with 4 LED surround lights, for best in class brightness without shadow or glare. Its 12mm 320 x 240 digital image sensor provides superior image quality. The optimised 3.5in LCD, digital screen delivers a crisp, clear picture. Its enhanced cable and aluminium head improve flexibility and delivers unmatched durability and manoeuvrability. Flexible battery system, works with all Milwaukee M12™ batteries. Supplied with: 1 x 12 Volt 2.0Ah Li-Ion Battery, 1 x 8GB SD Memory Card, 1 x Charger and 1 x Case.

The Stanley Intelli Tools Inspection Camera is the perfect tool for inspection of otherwise inaccessible areas. Its flexible camera hose is 1m long and only 8mm wide, allowing you to access and navigate most tight spaces. It also enables you to look inside equipment without having to dismantle, so is ideal for the inspection of vehicles, pipes and walls. It has an LCD colour screen, 2.31 inches (640 x 480 pixels), with a 360 rotating display. The camera head is equipped with an LED light and 8 different brightness levels that allow you to see even in dark environments. Resistant to water and dust, IP67 rated. It comes with a single hook, double hook, mirror and magnet attachments which fit on the camera end enabling retrieval of fallen objects such as from engine bays for mechanics etc.

Olympia Tools Hammer Drill with a powerful motor that offers hammer and rotary drilling. For ease of use, it has a variable speed pre-selection dial. It also offers forward and reverse rotation. Supplied with a side handle and depth gauge. Specification: Chuck: 13mm (1/2in) KeylessInput Power: 600WNo Load Speed: 0-3,000/min.Impact Rate: 0-50,400/bpmCapacity: Masonry 13mm, Steel 10mm, Wood 20mmWeight: 1.97kg

The Metabo MHE 5 SDS Max Demolition Hammer has a thumb wheel for pre selection of the speed and impact rate. With electronic soft start for smooth start-up. Its low weight, die cast magnesium gear housing allows for optimum heat dissipation. Fitted with a lockable switch for comfortable chiselling in continuous operation. The adjustable front handle can be rotated 360 and the angle adjusted for an optimum working position. Metabos' VibraTech (MVT) system comprises of an integrated damping system and side handle, that help to reduce vibrations in order to protect the user's health. The Vario-Tacho-Constamatic (VTC) system provides full wave electronics that allow for more sensitive work to be carried out, such as materials that require customised speeds whilst remaining constant under load. Includes a service display light that indicates when the carbon brushes need to be replaced, and an LED indicating mains voltage. Supplied with: 1 x Front Handle, 1 x Lubricant for Tool Shank End, 1 x Duster and 1 x Plastic Carry Case. Specification Input Power: 1,300 Watt.Impact Rate: 3,000/bpm, 8.6 joules.Cable Length: 4m. Weight: 6.6kg.Metabo MHE 5 SDS Max Demolition Hammer 5kg 240 Volt Version.

Metabo KHE 3251 SDS Plus Hammer Drill 3 Mode 800 Watt 110 Volt Version

Metabo KHE 3251 SDS Plus Hammer Drill 3 Mode 800 Watt 240 Volt Version

Metabo KHE 2644 3 Mode SDS Plus Hammer 800 Watt 110 Volt Version.

Metabo KHE 2644 3 Mode SDS Plus Hammer 800 Watt 240 Volt Version.

Milwaukee Kango K500ST 5Kg SDS Max Chipping Hammer 1100 Watt 240 Volt Version.

The Milwaukee Kango 900K Breaker K Steel Reception, has a highly robust design with fewer vulnerable parts and high motor power input for enhanced reliability and durability. This breaker offers superior performance with high blow energy of 27 joules. The AVS (Anti Vibration System) is incorporated on all handles (rear, additional front spade and straight handle), and with soft-grip to decrease user fatigue. Other features include: full-wave digital electronics, variable speed electronic, softstart, no load speed limitation, lock on switch, service indicator light, automatic cut off carbon brushes, and speed preselection switch (A - G). Comes supplied with a heavy-duty carry case, 6 metre cable, front spade handle, straight handle, dust shield and grease. Specification Mode: Chisel Only.Voltage: 240V.Input Power: 1,600 Watt.Impact Rate: 975-1,950/bpm, 7-27 joules.Tool Holder: K Hex 21mm.Weight: 11kg.

The Milwaukee Kango 750S SDS Max Combi Breaking Hammer (7kg class) is suitable for hammer drilling and chiseling. It has a powerful 1,550 Watt motor to ensure maximum power, yet maximum durability with effective heat dissipation. The Kango 750S has a large, heavyweight striker delivering maxmimum impact energy. It has soft starting for a more precise start, and AVS (anti-vibration system) and soft-grip handles for additional comfort. The soft hammer mode reduces blow energy for more sensitive materials. Supplied in a kitbox. Specification Modes: Hammer Drill, Chisel.Input Power: 1,500 Watt.Impact Rate: 2,740/bpm with 11.9 Joules.Capacity: Concrete: 50mm, Core: 150mm.Weight: 8.2kg.

The Milwaukee Kango 545S Combi SDS-Max Breaking Hammer is a 2 mode SDS-Max combi hammer, suitable for hammer drilling and chiseling. Its roto-stop and multi position chisel function give 12 different positions to optimise the working angle. The Kango 545S has a soft hammer mode to reduce blow energy for drilling/chiseling in sensitive materials. It has soft starting for a more precise start, and constant electronics for keeping the speed uniform even under load. A lock on switch provides more comfortable extended use. The breaking hammer comes with an additional handle that can be fixed in 3 different positions. It has AVS (anti-vibration system) and soft-grip handles for additional comfort. A power light informs if electricity flows. Supplied in a kitbox. Specifications Mode: Hammer Drill and Chisel.Input Power: 1,300 Watt.Impact Rate: 2,840/bpm with 8.5 Joules.Capacity: Concrete: 45mm, Core: 100mm.Weight: 6.3kg.

The Milwaukee 540S Combi SDS-Max Breaking Hammer is a 2 mode SDS-Max combi hammer, suitable for hammer drilling and chiselling. Its roto-stop and multi position chisel function give 12 different positions to optimise the working angle. The Kango 540S has robust magnesium gear housing for tough environments, exact seat fitting of gear components and better cooling. Its safety clutch protects both the operator and machine if the drill bit jams. Low vibration construction enhances usage time per day, and a soft-grip main side handle provides comfort. Supplied in a kitbox. Specification: Modes: Hammer Drill, Chisel.Voltage: 110V.Input Power: 1,100 Watt.Impact Rate: 3,000/bpm with 7.5 Joules.Capacity: Concrete: 40mm, Core: 105mm, Tunnel Bit: 65mm.Toolholder: SDS-Max.Weight: 6.3kg.

The Milwaukee Kango 500S Breaker is a 5kg class breaking hammer with constant electronics to keep the speed uniform, even under load. It has AVS (Anti-Vibration-System), soft grip on front and back handle to maximise user comfort. A lock-on switch further ensures a comfortable extended use. The Kango 500S has a D-shaped front handle, which is fully adjustable and ideally designed for chipping work. A Variolock with 12 positions allows selection of the most appropriate chisel angle. The breaker's soft hammer mode reduces blow energy for chiselling in sensitive materials, and its soft start ensures a precise start of chiselling. Specification Input Power: 1,300 Watt.Impact Rate: 2,840/bpm with 8.5 joules.Tool Holder: SDS-Max.Weight: 6.3kg.

Milwaukee Kango K500ST 5kg SDS Max Chipping Hammer 1100 Watt 110 Volt Version.

The HiKOKI H60MC SDS Max Demolition Hammer offers a single speed and a robust, functional design. Its powerful motor produces a high impact rate of 1600/bpm and an impact energy of 22 joules. The variable lock mechanism can be adjusted at a 12-step angle. It has a single-step holder that makes it easy to change between bits, depending on jobs. Supplied with: 1 x Side Handle, 1 x Bull Point, 1 x Carrying Case. Specification: Mode: Chisel OnlyInput Power: 1,300WImpact Rate: 1,600/bpm, 22 joulesTool Holder: SDS MaxOverall Length: 570mmWeight: 10.0kg

1 x HiKOKI FDV16VB2/J2 13mm Keyless Rotary Impact Drill 110V version.

1 x HiKOKI FDV16VB2/J1 13mm Keyless Rotary Impact Drill 240V version.

1 x HiKOKI DV20VB2L 13mm Keyless Rotary Impact Drill 110V version.

1 x HiKOKI DV20VB2 13mm Keyless Rotary Impact Drill 240V version.

1 x HiKOKI DV18V/J7 13mm Keyless Rotary Impact Drill 110V version.

1 x HiKOKI DV18V/J6 13mm Keyless Rotary Impact Drill 240V version.

HiKOKI DH26PX2 SDS Plus Rotary Hammer Drill 110V Version

HiKOKI DH26PX2 SDS Plus Rotary Hammer Drill 240V Version

The Einhell TE-ID 500 E Impact Drill is suitable for jobs in and around the home, user-friendly thanks to its high-quality quick-change drill chuck. The infinitely adjustable drilling depth stop made of metal enables repeat drilling depths. Equipped with ergonomic soft grips for particularly comfortable operation. Its additional handle comes with ribs for secure fastening. With the practical speed preselector, you can adapt the speed of the robust, long-lasting metal gear unit at any time to the material you want to work on. It can also be used in a drill stand thanks to the 43mm clamping neck. Specification: Chuck: 1.5-13mmInput Power: 550WNo Load Speed: 0-3,000/0-48,000/min.Capacity: Wood 25mm, Metal 8mm, Concrete 10mmWeight: 1.7kg

The Einhell TC-RH 900/1 3 Mode SDS-Plus Rotary Hammer has been made with high-quality components for increased impact power and continuous operation. A robust aluminium gear head provides increased service life and the overload safety clutch protects the user from sudden bursts. With a rotation stop facility with chisel fixation and hammer stop facility. Supplied with: 1 x Metal Depth Gauge, 1 x Dust Cap and 1 x Transport Storage Case. Specification Modes: Rotary, SDS Hammer and Chisel OnlyInput Power: 900WNo Load Speed: 0-850/min.Impact Rate: 0-4,100/bpm with 3.0 joulesCapacity: Concrete: 26mmWeight: 3.9kg

The Einhell TC-ID 650 E Impact Drill is a versatile device that supports do-it-yourselfers at their working applications all around the house, workshop and garage. With its functions drilling, impact drilling and reversing for drilling and screwing. It is a helpful aide for all drill-driving works. The different drilling tools can be fixed quickly and without tools in the practical quick-action drill chuck. The speed of the drilling machine can be preselected and adjusted precisely with the inbuilt speed control electronics. A constant drilling depth during serial drillings is guaranteed by the precisely adjustable and stable metal depth stop. The operation switch can additionally be fixed for continuous operation. To have your hands free between the drilling works, a practical belt hook is provided at the housing. Metal depth stop, additional handle Specification: Input Power: 650WNo Load Speed: 0-2,600/min.Impact Rate: 0-41,600/bpmChuck: 13mm KeylessCapacity: Wood 25mm, Concrete 13mm, Steel 10mmWeight: 1.8kg

The Einhell TC-ID 1000E Impact Drill is suitable for DIY enthusiasts to use around the home and garage. A switch lets you select between the drilling and impact drilling functions. The sturdy full metal key chuck assures a safe fixing of the tool bit. With the integrated electronic controls the speed can be pre-selected and precisely adjusted. The sturdy, adjustable drilling depth stop is made of metal and enables exact, repeat drilling depths. The reversing facility means that screwdriving jobs can also be performed. For user-friendly and safe operation of the machine there is a large soft grip area and an additional handle with an anti-twist lock. Chuck: 13mmInput Power: 1,010WNo Load Speed: 0-3,000/min.Impact Rate: 0-48,000/bpmCapacity: Concrete 16mm, Steel 13mm, Wood 32mmWeight: 2.12kg

The Einhell RT-RH32 SDS Plus 3 Function Rotary Hammer Drill is fitted with a safety clutch and has a single speed. It has plenty of power for drilling and chisel work, even in concrete. The vibration-absorbing handle and special grip structure of the secondary handle make for virtually vibration-free use. The safety clutch releases immediately on suddenly drill bit stop. Supplied with: 4 x SDS Plus drill bits ( 8, 10, 12, 22 mm), 2 x SDS Plus Chisels, 1 x Metal Depth Gauge and 1 x Storage/Transport Case. Specification Mode: Rotary, SDS Hammer, Chisel OnlyInput Power: 1,250WNo Load Speed: 800/min.Impact Rate: 0-4,300/bpm, 3.5 joulesCapacity: Concrete 32mmWeight: 6.05kg

The Einhell RT-RH 20/1 SDS Plus Rotary Hammer with pneumatic hammer action. Ideal for challenging building, renovation and chiseling jobs. This all-rounder is equipped with all four functions: hammer drilling, drilling and chiseling with and without chisel lock. The SDS-Plus chuck enables drill bits and chisels to be changed quickly without tools. It also ensures optimum power transmission from the powerful 500W motor. For sensitive drilling when the hammer action is switched off, there is electronic control with speed pre selection. There is also a reversing facility ideal for use with screwdriving jobs whilst also making it easier to pull back out of drilled holes. The adjustable, metal drilling depth stop enables exact, repeat drilling depths. For increased safety the rotary hammer is fitted with a overload slip coupling which reacts immediately to any sudden jamming of the bit. The additional, anti-twist lock handle enables safe, user-friendly handling. Specification Mode: Hammer Drilling/Drilling/Chiseling/Chisel LockInput Power: 500 WattNo Load Speed: 0-1,200/min. Impact Rate: 0-5,800/bpm, 1.6 joulesCapacity: Concrete 20mmWeight: 2.2kg

The DEWALT D25981 28mm HEX Pavement Breaker delivers outstanding efficiency and durability. Its large, over sized mechanism delivers excellent breaking performance. With Active Vibration Control (AVC) for safer, more comfortable use and increased productivity. The Suspended Handle System absorbs the rebound and, working with the AVC, delivers the lowest vibration on the market. Fitted with a heavy-duty electronic module for constant power under load. It has an easy to service design, reducing repair costs. Ideal for breaking concrete floors, paths and pavements as well as road and asphalt working D25981: 28mm HEX Pavement Breaker ONLY. Voltage: 110V.Mode: Chisel Only.Input Power: 1,800 Watt.Impact Rate: 960/bpm, 62 joules.Tool Holder: 28mm HEXWeight: 31kg.

The DEWALT D25951K SDS Max Demolition Hammer has a powerful and durable 1,600W motor that provides 24 joules of single impact energy. Anti-Vibration Control helps to reduce fatigue, limiting vibration to a low of 8.8 m/s for increased safety, comfort and productivity. The SDS Max Tool holder provides compatibility with a wide variety of accessories for various applications. Includes a multi-position rubber handle for increased comfort and reduces fatigue for increased productivity. TOOL CONNECT Tag ready with cover (Tag NOT included) for Jobsite connectivity and inventory management. Specification: Voltage: 110VMode: Chisel OnlyInput Power: 1,600WImpact Rate: 1,620/bpm, 24 joulesTool Holder: SDS Max

DEWALT D25902K 10kg SDS Max Demolition Hammer has a powerful and durable 1550W motor which delivers outstanding concrete breaking performance, with Active Vibration Control system. It incorporates a counterbalance mass and a floating handle delivers extremely low vibration. Its in-line design makes for better handling and its quick change chisel adjustment allows fast orientation of the chisel through 12 preset positions. Its magnesium housings ensure maximum durability and minimum weight. Its compact size allows for work to be completed in confined areas. The large oversize hammer mechanism delivers extreme durability and excellent concrete breaking performance. Supplied with: 1 x Multi Position Side Handle, 1 x Chisel Bit and 1 x Heavy-Duty Carrying Case. Specification Mode: Chisel OnlyInput Power: 1,550WImpact Rate: 1,050-2,100/bpm, 19 joulesTool Holder: SDS MaxWeight: 10.5kg

DEWALT D25899K SDS Max Demolition Hammer 1500 Watt 110 Volt Version.

DEWALT D25899K SDS Max Demolition Hammer 1500 Watt 240 Volt Version.

The DEWALT D25810K SDS Max Chipping Combination Hammer has a powerful brushed motor for high performance even in demanding applications. Low vibration ensures maximum trigger time and also reduces user fatigue. Fitted with a soft, rubber anti-vibration handle. It has an ergonomic, compact and slim design which offers easy access to confined spaces. There's a chisel angle option which is easy to activate and use. Specification Modes: Hammer/Chisel.Input Power: 1050 Watt.Impact Rate: 3,150/bpm, 7.1 Joules. Weight: 5.6kg.1 x DEWALT D25810K SDS Max Chipping Combination Hammer 110 Volt Version.

1 x DEWALT D25614K SDS Max Combination Hammer 110V Version.

1 x DEWALT D25614K SDS Max Combination Hammer 240V Version.

The DEWALT D25601K SDS-Max Combination Hammer is ideal for drilling anchor fixing and through holes in concrete and masonry. Its chain drive improves durability and increases efficiency together with an oil filled gearbox to ensure total component lubrication and superior heat dissipation and its ergonomic, compact and slim line design maximises control and offers easy access to confined spaces. Incorporates Active Vibration Control system with a floating rear handle and damped side handle to reduce vibration plus a rotation-stop facility for medium-light demolition applications. Its unique dust sealing protection to prevent even the finest dust ingress into the hammer mechanism delivering high durability and extended tool life and the hammer mechanism is optimised by reducing the number of components and by improving dampening to deliver maximum impact energy and therefore the efficiency to drill into the hardest concrete. The efficient mechanism delivers impact blows directly to the bit without losses through excessive vibration and rebound dampening reduces stress to the tool and the electronic variable impact energy/speed for total control with smaller bits and light material with the lock-on switch for greater control when in chipping mode. Excellent power to weight ratio: 12 Joules of impact energy delivered by a 6.8 kg hammer. Supplied with: 1 x Multi-Position Side Handle with Depth Stop, 1 x Heavy-Duty Carrying Case. Specification Modes: Rotary, SDS Hammer.Input Power: 1,250 Watt.No Load Speed: 210-415/Min.Impact Rate: 1,430/2,840/bpm, 2.8 Joules.Capacity: Concrete: 45mm, Core: 110mm.Weight: 6.8kg.Tool Holder: SDS-Max.Length: 477mm,Height: 245mm,Width: 104mm. Weight 6.8kg.DEWALT D25601K SDS Max Combi Hammer 6kg 1250 Watt 110 Volt Version.

The DEWALT D25417KT SDS Plus Combination Hammer is fitted with a 3-mode selector dial: hammer and rotary, rotary only, hammer only, making it ideal for various jobsite applications. It has a rotation stop mode for light chiselling applications in brick, soft masonry and concrete. Perform Protect delivers minimal vibration at 8.2m/s, reducing user fatigue during extended operating periods. An anti-rotation system detects a loss of tool control and reacts by instantly cutting the power for enhanced safety. The drill is ideal for drilling anchors and fixing holes into concrete, brick and masonry. Supplied with: 1 x Quick-Change 3 Jawed Chuck, 1 x Pair of Gloves, 1 x Pair of Safety Glasses, 15 x Drill Bits Chisels and 1 x TSTAK Box. Specification: Mode: Hammer Rotary, Rotary Only, Hammer OnlyInput Power: 1,000WNo Load Speed: 0-820/min.Impact Rate: 4,700/bpm with 4.2 joulesCapacity: Concrete: 6-32mm Weight: 4kgD25417KT 4kg SDS Plus Combination Hammer 110V Version

DEWALT D25134KL SDS Plus 3 Mode QCC Hammer Drill 800 Watt 110 Volt Version.

DEWALT D25134K SDS Plus 3 Mode QCC Hammer Drill 800 Watt 240 Volt Version.

DEWALT D25133KL SDS Plus 3 Mode Hammer Drill 800 Watt 110 Volt Version.

DEWALT D25133K SDS Plus 3 Mode 26mm Hammer Drill 800 Watt 240 Volt Version.

DEWALT D25033K SDS 3 Mode Hammer Drill 710 Watt 110 Volt Version.

D25033K SDS Plus 3 Mode Hammer Drill 710W 240V Version.

The DEWALT D024K 13mm Percussion Drill 110 Volt Version.

The DEWALT D024K 13mm Percussion Drill 240 Volt Version.

The Black Decker BEH201 Corded Drill has a hammer action feature that is ideal for fast drilling in masonry. With a variable speed motor for a controlled and accurate start up. The adjustable side handle gives you the ability to feel comfortable whilst completing your task and the lock-on button for greater comfort during longer tasks. It also features a 10mm keyed, single sleeve chuck. Specification: Input Power: 450WNo Load Speed: 0-2,800/min.Impact Rate: 0-48,000/bpmCapacity: Masonry 10mm, Steel 6mm, Wood 10mm.Chuck: 10mm.Cable Length: 2m.Sound Pressure LPA: 94.5 dB(A).Weight: 1.71kg.

Vitrex Power Mixer 850 Watt 110 Volt Version.

Vitrex Power Mixer 850 Watt 240 Volt Version.

Vitrex Industrial Power Mixer 1400 Watt 110 Volt Version.