Abrasives, Fillers, Sealants & Lubricants

Flexible Decorator's Filler White 290ml

The Everbuild EVBFLEXWH Flexible Decorator's Filler is a fast drying, acrylic based filler and sealant that remains permanently flexible. Can be overpainted with most paint types or covered over with wallpaper. No sanding down is required. Colour: White.Size: 290ml.

£ 3.37

Flexible Filler Squeezy Tube 200ml

This Everbuild Flexible Decorators Filler is a fast drying, acrylic based filler and sealant which remains permanently flexible, and can be overpainted in an hour with most paint types, or covered over with wallpaper. No sanding down is required.The multipurpose filler is easily cleaned with water, and is ideal for sealing, filling cracks, and gaps prior to decorating. The 200ml sealant can also be used around skirting boards, ceiling cornices, window and door frames, as well as stair treads, risings, and fixtures adjoining walls.Specifications: Colour: White.Size: 200ml.

£ 5.99

Fill & Skim Tub 5 litre

The Everbuild Fill Skim 5 litre Tub is a revolutionary ready-mixed plaster substitute, formulated using lightweight polymer spheres to produce an easy-to-spread, smooth product which enables all tradesmen and DIY enthusiasts to produce a quality finish and is normally only associated with a time served plasterer.This white-coloured Fill Skim dries to a hard, but flexible finish, suitable for wall or ceiling application.It will fill holes down to 25mm in one application and is the ideal choice for covering textured paint surfaces, and for restoring old pitted/uneven plastered walls/ceilings in just one quick application.Fill Skim is the ideal choice for electricians, plumbers, joiners and general builders as a one coat patching plaster for small repair jobs, e.g., over recessed cable trunking and around holes in walls where piping/sockets have been installed.Once dry, Fill Skim will not shrink, sag, or crack and is ready to paint or paper over 24 hours after application. The product finishes smooth and requires little or no sanding, and can be used for internal repairs over plaster, wood, brick, stone, and rendering. Specifications: Colour: White.Size: 5L.

£ 58.65

Filler Coat 5 litre

The Everbuild FILLCOAT5 Filler Coat 5 litre is a thick base coat for use on imperfect surfaces like walls and ceilings etc, prior to painting, will simply cover and seal in one application.This FILLCOAT5 is in a plastic re-sealable tub for easy use and storage.This Everbuild product hides and obliterates areas filled badly as well as covering and preventing the reappearance of hairline cracks.This white coloured product works like a roll-on filler, the thick formula completely covers strong colours and is ideal for use on walls and ceilings.Specifications: Colour: White.Size: 5L.

£ 89.10

Exact Gap Foam 750ml

This Everbuild EVBEXACT7 Exact Gap Foam filler has been specially formulated to provide a more precise foam product that only expands by between 5-10% from the bead extruded on application. EVBEXACT7 is suitable for plumbing, insulating around door frames and many other building uses. The controlled application significantly reduces the amount of cured excess foam that has to be cut back afterwards. It shoots liquid foam deep into cavities, creating a long lasting seal, which insulates against heat, sound and moisture. Suitable for inside or out, it can be easily trimmed and sanded ready to be painted, filled or plastered. Size: 750 ml.

£ 20.11

Gun Grade Thermofoam® Insulation Foam 750ml

The Everbuild Thermofoam Insulation Foam is a specially formulated, highly flexible PU foam that absorbs component movement thereby giving an air-tight seal to reduce heat loss and improve energy efficiency in buildings. It adheres to all common building materials including concrete, brickwork, wood, plaster, plastic, stone, metal etc. Thermofoam Insulation Foam has been tested to the latest standard and is not only air permeability tested to EN 12114:200-03 but also acoustic rated to EN ISO 717-1 up to 64 dB, temperature resistant (-40 to 80C) and finally fire rated to ISO 13501 Class E. Areas for Use: • Window installation (clean, controlled backfilling and insulated sealing of window and external roller blind cavities) • Gap filling of external door frames (must be used in conjunction with mechanical fixings) • Filling cavities in wall break-through for all types of utilities and services Specification: Colour: Off WhiteSize: 750ml

£ 22.54

Fire Foam B1 Hand Grade Aerosol 750ml

Everbuild EVBEVFIRE firefoam B1 is a quick setting one-part polyurethane foam with fire retardant properties. The foam expands on application to up to 50 times its original volume and meets the extremely stringent requirements of DIN 4102 Part 1 for Construction Materials; Class B and BS476 Part 20 (1987) where fire ratings of 30 mins to 3.5 hours are achievable. Once cured, the foam can be cut, sawn or plastered over after only one hour. High degree of fire rating: slows down the passage of flames and smoke in comparison to standard B3 grades.Quick setting - can be cut, sawn or plastered in 1-hour is economical in use as it will expand up to 50 times its original volume. Everbuild EVBEVFIRE is gun operated and is ideal for filling:- Gaps around pipe entries through fire rated walls, to provide a fire rated seal around window and door frames, electrical wire chasing prior to plastering, where a fire rating is required, deep joints prior to applying sealant or plaster also irregular gaps in stone, brick, concrete or plaster. Everbuild EVBEVFIRE is ideal for fixing:- door frames, timber structures, windowsills and thresholds and window frames. Also for insulating:- behind cladding to exterior walls, behind sofit and barge boards and even in automotive applications. 750ml

£ 16.98

Fire Foam B2 Hand Grade Aerosol 750ml

Everbuild EVBB2FIREHAN Fire Foam B2 is a quick setting one part polyurethane foam with fire resistant properties. The foam expands on application to up to 50 times its original volume and meets the requirements of DIN 4102 Part 1 for Construction Materials: Class B2Once cured, the foam can be cut, sawn or plastered over after only one hour providing the working temperatures (can and surfaces) are between5 to25c, ideally 20c.The high degree of fire rating slows down the passage of flames and smoke in comparison to standard B3 grades.Everbuild EVBB2FIREHAN is hand operated and is ideal for filling gaps around pipe entries through fire rated walls, to provide a fire rated seal around window and door frames, and electrical wire chasing prior to plastering. Where a fire rating is required, filling deep joints prior to applying sealant or plaster, and also irregular gaps in stone, brick, concrete, or plaster.It is ideal for fixing door frames, timber structures, windowsills, thresholds, and window frames.The product is also, for insulating behind cladding to exterior walls, behind soffit and barge boards, even in automotive applications. Specification: Size: 750ml.

£ 15.35

Fire Foam B2 Gun Grade Aerosol 750ml

The Everbuild EVBB2FIREGUN firefoam B2 is a quick setting one part polyurethane foam with fire resistant properties. The foam expands on application to up to 50 times its original volume and meets the requirements of DIN 4102 Part 1 for Construction Materials: Class B2.Once cured, the foam can be cut, sawn or plastered over after only one hour providing the working temperatures (can and surfaces) are between5 to25C, ideally 20C.The high degree of fire rating slows down the passage of flames and smoke in comparison to standard B3 grades.Everbuild EVBB2FIREGUN is gun operated and is ideal for filling gaps around pipe entries through fire rated walls, to provide a fire rated seal around window and door frames, and electrical wire chasing prior to plastering.Where a fire rating is required, filling deep joints prior to applying sealant or plaster also irregular gaps in stone, brick, concrete, or plaster.Everbuild EVBB2FIREGUN is ideal for fixing door frames, timber structures, windowsills, thresholds, and window frames.Also, for insulating: - behind cladding to exterior walls, behind soffit and barge boards, and even in automotive applications. Specification: SIze: 750ml.

£ 15.37

Fire Foam B1 Gun Grade Aerosol 750ml

The Everbuild Fire Foam B1 Gun Grade is a quick-setting fire rated, one part polyurethane foam, and expands on application to yield up to 50 times the can contents. Fire rated up to 4 hours in certain joint configurations.For use with an Everbuild Professional Foam Gun, once cured the foam can be cut, sawn or plastered over after only one hour.It will fill irregular and broad gaps where most conventional fillers would fail, and possesses insulating, and sound deadening properties.This Fire Foam meets the stringent requirements of DIN 4102 Part 1 for Construction Materials, Class B1 and BS 476 Part 20. Specification: Size: 750ml.

£ 16.98

Spurt / Foam Gun 210003

Concept Spurt / Foam Gun 210003 has quality components and high mechanical build quality, which means high thrust ratios. air tightness and reliability. This all-metal gun has a brass nozzle, a teflon-coated needle, and a universal adaptor. It has easy flow control, allowing one-handed use and excellent air-tightness. This gun is suitable for professional use. Teflon allows easy removal of built-up solidified PU foam.For use with polyurethane expanding foam cartridges.

£ 25.39

Professional Foam Gun

This Roughneck Professional Foam Gun has a large, sturdy metal body with a comfortable soft grip, making it suitable for long working periods. The Foam Gun has a nickel-plated aluminium body, steel trigger, brass barrel and non-return PTFE ball. Its brass needle has a non-stick coating and an aluminium can holder adaptor. Ideal for the following applications: Filling: Gaps in brick, concrete, stone and plaster.Gaps and holes around pipe work and duct work.Spaces around window frames and door frames.Deep joints before applying plaster or sealant. Insulating: Internally for exterior walls.Soffits and barge boards. Supplied complete with:2 x long plastic extension tubes.2 x plastic nozzles.

£ 28.07

No Waste Expanding Foam 750ml

The Everbuild brand is not only hugely popular with tradesmen and DIY'ers it's quite literally huge - the biggest range in the business, in addition to core manufactured products a wide range of ancillary items from sealant guns to dust sheets, line markers to masking tape make Everbuild the number one Range. The range of products we actually manufacture is extensive, from chemical blending for admixtures and water proofers through water based sealant manufacturing to the highly advanced polymer engineering undertaken in manufacturing silicone and hybrid sealants and adhesives and a wide range of powder products. Everbuild EVBNOWASTEHH no waste foam is the first handheld foam that allows part used cans to be saved and used again. It has a shelf life of 24 months, its unique safety valve will not clog or leak. This Everbuild EVBNOWASTEHH is ideal for use on irregular gaps in stone, brick, concrete or plaster, gaps around pipe entries through walls, gaps around window frames, door frames etc, electrical wire chasing prior to plastering and deep joints prior to applying sealant or plaster. 750ml

£ 20.65

Dual Purpose Foam Cleaner 500ml

The Everbuild EVBGFSC5 dual purpose foam cleaner is used to remove wet / uncured foam from brick, PVCu, plaster etc. This EVBGFSC5 simply attaches to Everbuild gun foam applicator for purging through, also includes spray nozzle for use without applicator to remove wet foam from outside of the gun and from most building substrates. Easy to use with some simple steps: Pull the trigger on the gun to release the solvent into the gun barrel and discharge the solvent into a suitable container for disposal. Only stop discharging the cleaner when the solution being ejected from the gun is completely clear. Leave the gun foam cleanse attached to the gun for 5 minutes to allow the solvent in the gun to work on the residues inside. Pull the trigger once again until only clear solvent emerges. Leave for a further 5 minutes and repeat this process 2 or 3 times until the gun is completely clear. 500ml.

£ 10.18

Pro Gun Grade Expanding Foam 750ml

This Everbuild EVBEVGF7 gun grade expanding foam is a quick setting polyurethane-based foam which expands greatly on application yielding up to 50 times the original can contents. It can be cut, sawn, plastered and sealed over after approximately one hour, ideal for all building applications, and will fill irregular gaps, fixes framework, insulates, and deadens sound. EVBEVGF7 is designed for regular and professional use in conjunction with Gun Foam Applicators. Size: 750ml.

£ 11.41

Liberty Green Aluminium Oxide Sheets 230 x 280mm Assorted (3)

Oakey Liberty Green Sandpaper Sheets are the professional decorators first choice when sanding - it works faster, lasts longer and fails to clog; delivering everything a true tradesperson requires. Constructed from premium grade aluminium oxide and a heavy E-weight backing, Liberty Green is self-sharpening, anti-clogging, extremely durable and lasts up to 10 times longer than standard sandpaper. Perfect for everyday decorating or even for heavy-duty applications. Suitable for hand and machine sanding and can be used on wood, metal, plaster, filler, varnish and paint. Specification: Size: 230 x 280mmGrade: 1 x Coarse 60, 1 x Medium 80 and 1 x Fine 120Pack Quantity: 3

£ 9.40

Between Coats Finishing Sandpaper 230 x 280mm Assorted (3)

Oakey Between Coats Finishing Sandpaper Sheets help you achieve a professional smooth finish when sanding in-between coats of paint or varnish. Use on plaster and filler to remove surface imperfections, or on wood to finish surfaces for professional results. Suitable for hand and machine sanding and can be used on wood, plaster, varnish and paint. Specification: Size: 230 x 280mmGrade: 2 x Very Fine 180G and 1 x Very Fine 240GPack Quantity: 3

£ 9.02

Superflex Cloth Backed Aluminium Oxide Sheets 230 x 280mm Assorted (3)

Oakey Superflex Cloth Backed Abrasive Sheets last up to 8 times longer than standard sandpapers. With an easy tear construction and anti-clogging structure that minimises surface waste. The tough, flexible backing makes it ideal for use on contoured surfaces. Suitable for hand or power tool use. Ideal for: wood, paint, varnish, filler and metal surfaces. Specification: Size: 230 x 280mmGrade: 1 x Coarse 60, 1 x Medium 80 and 1 x Fine 120Pack Quantity: 3

£ 9.57