Skip to Content
  1. Products
  2. Tools
  3. Adhesives, Fixings & Hardware
-
Sort By: Newest Arrivals

Adhesives, Fixings & Hardware

  • Adhesives
  • Bolts & Nuts
  • Bracket
  • Building Consumables
  • Bulbs & Electrical Fittings
  • Chains, Ropes & Tie Downs
  • Compression Springs
  • End Caps
  • Fixings
  • General Hardware
  • Hand Tackers & Staplers
  • Nails
  • Riveting & Soldering
  • Screws
  • Tapes
Flashing Tape Grey 150mm x 10m Roll
DENFTG150MM tape has the following dimensions:Length: 10m. Width: 150mm.
£ 25.99 25.99 GBP
Flashing Tape Grey 100mm x 10m Roll
DENFTG100MM tape has the following dimensions:Length: 10m. Width: 100mm.
£ 17.31 17.31 GBP
0901 Line Marking Spray Paint White 750ml
Colour: White.
£ 5.44 5.44 GBP
0902 Line Marking Spray Paint Red 750ml
Colour: Red.
£ 6.08 6.08 GBP
0905 Line Marking Spray Paint Orange 750ml
Colour: Orange.
£ 6.08 6.08 GBP
0903 Line Marking Spray Paint Green 750ml
Colour: Green.
£ 5.44 5.44 GBP
0904 Line Marking Spray Paint Blue 750ml
Colour: Blue.
£ 5.44 5.44 GBP
Survey Line® Marker Spray Yellow 700ml
1 x Everbuild Survey Line Marker Spray Yellow 700ml.
£ 10.97 10.97 GBP
101 Multi-Purpose Linseed Oil Putty Natural 2kg
This Everbuild 101 Multi-Purpose Linseed Oil Putty comes in: Colour: NaturalSize: 2kg
£ 8.08 8.08 GBP
401 Brick & Patio Cleaner 5 litre
Everbuild 401 Brick and Patio Cleaner is a fast-acting, acid-based formula (9.5% strength) that dissolves mortar and cement stains and ingrained dirt and paint on most mineral surfaces such as brick, stone, concrete, flagstone and earthenware. Size: 5 litre
£ 6.62 6.62 GBP
Voyager IV 4 Wheel Spray Paint Applicator 9200B
The Voyager 4 Spray Paint Applicator is a 4 wheeled applicator which is used with Line Marking Paint to mark out playing fields, car parks, warehouses, golf courses, tennis courts, leisure centres, roads etc. The 4 wheels are ideal for when extra stability is required, such as on grass. It is easy to set up and use and is designed for line marker cans of 750ml.
£ 212.81 212.81 GBP
Voyager II 2 Wheel Spray Paint Applicator 9200
The Voyager 2 Spray Paint Applicator is a 2 wheeled applicator which is used with Line Marking Paint to mark out playing fields, car parks, warehouses, golf courses, tennis courts, leisure centres, roads etc. It is easy to set up and use and is designed for line marker cans of 750ml.
£ 163.67 163.67 GBP
0900 Line Marking Spray Paint Yellow 750ml
Colour: Yellow.
£ 5.44 5.44 GBP
0906 Line Marking Spray Paint Black 750ml
Colour: Black.
£ 5.44 5.44 GBP
Spraymaster II Hand Held Applicator
The Aerosol Spraymaster II is a hand-held, ergonomic trigger spray applicator. Its design allows for simple application of 750ml linemarker cans. It fits comfortably in the hand and helps to prevent wrist strain which can be caused from holding the can upside down and spraying with a finger.
£ 24.57 24.57 GBP
Fabrication Of P Shaped Zinc Bracket
Fabrication Of P Shaped Zinc Bracket
£ 1.71 1.71 GBP
M24 x 1mtr Ht Allthread Gr8.8
M24 x 1mtr Ht Allthread Gr8.8
£ 11.61 11.61 GBP
M16 x 1mtr Ht Allthread Gr8.8
M16 x 1mtr Ht Allthread Gr8.8
£ 5.77 5.77 GBP
M12 x 1mtr Ht Allthread Gr8.8
M12 x 1mtr Ht Allthread Gr8.8
£ 2.89 2.89 GBP
M6 x 1mtr Ht Allthread Gr8.8
M6 x 1mtr Ht Allthread Gr8.8
£ 1.12 1.12 GBP
16mm Rect Section Spring
16mm Rect Section Spring
£ 0.04 0.04 GBP
10mm X 30 X 1.50 Repair Washer
10mm X 30 X 1.50 Repair Washer
£ 0.04 0.04 GBP
10mm X 50 X 1.50 Repair Washer
10mm X 50 X 1.50 Repair Washer
£ 0.09 0.09 GBP
4mm Square Section Spring
4mm Square Section Spring
£ 2.60 2.6 GBP
10mm Bright Plain Washer Form B
10mm Bright Plain Washer Form B
£ 0.00 0.0 GBP
4mm Bright Plain Washer Form A
4mm Bright Plain Washer Form A
£ 3.73 3.73 GBP
M16 DIN934 (Gr.8 DIN267) Full
M16 DIN934 (Gr.8 DIN267) Full
£ 0.09 0.09 GBP
M8 DIN982 Type P Nylon Insert
M8 DIN982 Type P Nylon Insert
£ 0.03 0.03 GBP
M5 DIN982 Type P Nylon Insert
M5 DIN982 Type P Nylon Insert
£ 0.01 0.01 GBP
M12 DIN982 Type P Nylon Insert
M12 DIN982 Type P Nylon Insert
£ 0.09 0.09 GBP
M10 x 1.25 DIN982 Type P Nyloc
M10 x 1.25 DIN982 Type P Nyloc
£ 0.09 0.09 GBP
M10 DIN982 Type P Nylon Insert
M10 DIN982 Type P Nylon Insert
£ 0.06 0.06 GBP
M8 DIN982 Type P Nylon Insert
M8 DIN982 Type P Nylon Insert
£ 0.02 0.02 GBP
M4 DIN934 Brass Full Nut
M4 DIN934 Brass Full Nut
£ 0.03 0.03 GBP
M24 x 1mtr MS Allthread
M24 x 1mtr MS Allthread
£ 12.19 12.19 GBP
M20 x 1mtr MS Allthread
M20 x 1mtr MS Allthread
£ 4.49 4.49 GBP
M14 x 1mtr MS Allthread
M14 x 1mtr MS Allthread
£ 3.29 3.29 GBP
M12 x 300mm MS Allthread
M12 x 300mm MS Allthread
£ 0.61 0.61 GBP
M8 x 1mtr MS Allthread
M8 x 1mtr MS Allthread
£ 0.78 0.78 GBP
M5 x 1mtr MS Allthread
M5 x 1mtr MS Allthread
£ 0.42 0.42 GBP
M4 x 1mtr MS Allthread
M4 x 1mtr MS Allthread
£ 0.33 0.33 GBP
M3 x 1mtr MS Allthread
M3 x 1mtr MS Allthread
£ 0.20 0.2 GBP
M36 x 1mtr MS Allthread
M36 x 1mtr MS Allthread
£ 20.07 20.07 GBP
M24 x 1mtr MS Allthread
M24 x 1mtr MS Allthread
£ 3.89 3.89 GBP
1.3/8 x 5/64 Mild Steel Cotter
1.3/8 x 5/64 Mild Steel Cotter
£ 7.84 7.84 GBP
5mm A2 Washer Form A DIN 125 Pack - 1000
5mm A2 Washer Form A DIN 125 Pack - 1000
£ 0.01 0.01 GBP
16mm Bright Plain Washer Form A - Box 100
16mm Bright Plain Washer Form A - Box 100
£ 0.08 0.08 GBP
M10 x 1.5M Allthread BZP 8.8
M10 x 1.5M Allthread BZP 8.8
£ 10.77 10.77 GBP
1390M Threaded Rod Cutter 10mm 26891
RIDGID 1390M Threaded Rod Cutter Blade Size: 10mm.
£ 677.95 677.95 GBP
1390M Threaded Rod Cutter 8mm 20271
RIDGID 1390M Threaded Rod Cutter Blade Size: 8mm.
£ 677.95 677.95 GBP
Repair Washer ZP 8mm x 50 x 1.50 (Box 100)
These METALMATE Repair Washers have the following specification: Size: 8mm x 50 x 1.50Finish: Zinc PlatedBox Quantity: 100
£ 13.40 13.4 GBP
Repair Washer ZP 8mm x 38 x 1.50 (Box 100)
These METALMATE Repair Washers have the following specification: Size: 8mm x 38 x 1.50Finish: Zinc PlatedBox Quantity: 100
£ 7.63 7.63 GBP
Repair Washer ZP 8mm x 30 x 1.50 (Box 100)
These METALMATE Repair Washers have the following specification: Size: 8mm x 30 x 1.50Finish: Zinc PlatedBox Quantity: 100
£ 5.11 5.11 GBP
Repair Washer ZP 8mm x 25 x 1.50 (Box 100)
These METALMATE Repair Washers have the following specification: Size: 8mm x 25 x 1.50Finish: Zinc PlatedBox Quantity: 100
£ 3.68 3.68 GBP
Repair Washer ZP 6mm x 50 x 1.50 (Box 100)
These METALMATE Repair Washers have the following specification: Size: 6mm x 50 x 1.50Finish: Zinc PlatedBox Quantity: 100
£ 13.43 13.43 GBP
Repair Washer ZP 6mm x 38 x 1.50 (Box 100)
These METALMATE Repair Washers have the following specification: Size: 6mm x 38 x 1.50Finish: Zinc PlatedBox Quantity: 100
£ 8.41 8.41 GBP
Repair Washer ZP 6mm x 30 x 1.50 (Box 100)
These METALMATE Repair Washers have the following specification: Size: 6mm x 30 x 1.50Finish: Zinc PlatedBox Quantity: 100
£ 5.02 5.02 GBP
Repair Washer ZP 6mm x 25 x 1.50 (Box 100)
These METALMATE Repair Washers have the following specification: Size: 6mm x 25 x 1.50Finish: Zinc PlatedBox Quantity: 100
£ 3.91 3.91 GBP
Repair Washer ZP 6mm x 20 x 1.25 (Box 100)
These METALMATE Repair Washers have the following specification: Size: 6mm x 20 x 1.25Finish: Zinc PlatedBox Quantity: 100
£ 2.57 2.57 GBP
Repair Washer ZP 5mm x 25 x 1.50 (Box 1000)
These METALMATE Repair Washers have the following specification: Size: 5mm x 25 x 1.50Finish: Zinc PlatedBox Quantity: 1,000
£ 31.78 31.78 GBP
Repair Washer ZP 5mm x 20 x 1.25 (Box 1000)
These METALMATE Repair Washers have the following specification: Size: 5mm x 20 x 1.25Finish: Zinc PlatedBox Quantity: 1,000
£ 18.98 18.98 GBP
Repair Washer ZP 12mm x 50 x 1.50 (Box 100)
These METALMATE Repair Washers have the following specification: Size: 12mm x 50 x 1.50Finish: Zinc PlatedBox Quantity: 100
£ 12.87 12.87 GBP
Repair Washer ZP 12mm x 38 x 1.50 (Box 100)
These METALMATE Repair Washers have the following specification: Size: 12mm x 38 x 1.50Finish: Zinc PlatedBox Quantity: 100
£ 7.63 7.63 GBP
Repair Washer ZP 10mm x 38 x 1.50 (Box 100)
These METALMATE Repair Washers have the following specification: Size: 10mm x 38 x 1.50Finish: Zinc PlatedBox Quantity: 100
£ 7.46 7.46 GBP
Repair Washer ZP 10mm x 30 x 1.50 (Box 100)
These METALMATE Repair Washers have the following specification: Size: 10mm x 30 x 1.50Finish: Zinc PlatedBox Quantity: 100
£ 4.99 4.99 GBP
Repair Washer ZP 10mm x 25 x 1.50 (Box 100)
These METALMATE Repair Washers have the following specification: Size: 10mm x 25 x 1.50Finish: Zinc PlatedBox Quantity: 100
£ 3.46 3.46 GBP
Type A Washer Bright ZP 5mm (Box 1000)
These METALMATE Type A Washers have the following specification: Size: 5mmFinish: Bright Zinc PlatedBox Quantity: 1,000
£ 6.72 6.72 GBP
Type A Washer Bright ZP 4mm (Box 1000)
These METALMATE Type A Washers have the following specification: Size: 4mmFinish: Bright Zinc PlatedBox Quantity: 1,000
£ 5.37 5.37 GBP
Type A Washer Bright ZP 30mm (Box 50)
These METALMATE Type A Washers have the following specification: Size: 30mmFinish: Bright Zinc PlatedBox Quantity: 50
£ 16.20 16.2 GBP
Type A Washer Bright ZP 27mm (Box 50)
These METALMATE Type A Washers have the following specification: Size: 27mmFinish: Bright Zinc PlatedBox Quantity: 50
£ 12.74 12.74 GBP
Type A Washer Bright ZP 24mm (Box 50)
These METALMATE Type A Washers have the following specification: Size: 24mmFinish: Bright Zinc PlatedBox Quantity: 50
£ 9.86 9.86 GBP
Type A Washer Bright ZP 20mm (Box 100)
These METALMATE Type A Washers have the following specification: Size: 20mmFinish: Bright Zinc PlatedBox Quantity: 100
£ 10.97 10.97 GBP
Type A Washer Bright ZP 18mm (Box 100)
These METALMATE Type A Washers have the following specification: Size: 18mmFinish: Bright Zinc PlatedBox Quantity: 100
£ 9.05 9.05 GBP
Type A Washer Bright ZP 16mm (Box 100)
These METALMATE Type A Washers have the following specification: Size: 16mmFinish: Bright Zinc PlatedBox Quantity: 100
£ 7.04 7.04 GBP
Type A Washer Bright ZP 14mm (Box 100)
These METALMATE Type A Washers have the following specification: Size: 14mmFinish: Bright Zinc PlatedBox Quantity: 100
£ 5.93 5.93 GBP
Type A Washer Bright ZP 12mm (Box 100)
These METALMATE Type A Washers have the following specification: Size: 12mmFinish: Bright Zinc PlatedBox Quantity: 100
£ 4.93 4.93 GBP
Type T Nylon Insert Nut ZP M8 (Box 200)
These METALMATE Type T Nylon Insert Nuts have the following specification: Size: M8Finish: Zinc PlatedClass: 6 SteelBox Quantity: 200
£ 7.08 7.08 GBP
Type T Nylon Insert Nut ZP M6 (Box 200)
These METALMATE Type T Nylon Insert Nuts have the following specification: Size: M6Finish: Zinc PlatedClass: 6 SteelBox Quantity: 200
£ 3.75 3.75 GBP
Type T Nylon Insert Nut ZP M5 (Box 1000)
These METALMATE Type T Nylon Insert Nuts have the following specification: Size: M5Finish: Zinc PlatedClass: 6 SteelBox Quantity: 1000
£ 11.65 11.65 GBP
Type T Nylon Insert Nut ZP M4 (Box 1000)
These METALMATE Type T Nylon Insert Nuts have the following specification: Size: M4Finish: Zinc PlatedClass: 6 SteelBox Quantity: 1000
£ 10.65 10.65 GBP
Type T Nylon Insert Nut ZP M3 (Box 1000)
These METALMATE Type T Nylon Insert Nuts have the following specification: Size: M3Finish: Zinc PlatedClass: 6 SteelBox Quantity: 1000
£ 9.54 9.54 GBP
Type T Nylon Insert Nut ZP M16 (Box 50)
These METALMATE Type T Nylon Insert Nuts have the following specification: Size: M16Finish: Zinc PlatedClass: 6 SteelBox Quantity: 50
£ 11.19 11.19 GBP
Type T Nylon Insert Nut ZP M14 (Box 100)
These METALMATE Type T Nylon Insert Nuts have the following specification: Size: M14Finish: Zinc PlatedClass: 6 SteelBox Quantity: 100
£ 17.49 17.49 GBP
Type T Nylon Insert Nut ZP M12 (Box 100)
These METALMATE Type T Nylon Insert Nuts have the following specification: Size: M12Finish: Zinc PlatedClass: 6 SteelBox Quantity: 100
£ 11.43 11.43 GBP
Type T Nylon Insert Nut ZP M10 (Box 200)
These METALMATE Type T Nylon Insert Nuts have the following specification: Size: M10Finish: Zinc PlatedClass: 6 SteelBox Quantity: 200
£ 15.54 15.54 GBP
Type P Nylon Insert Nut ZP M8 (Box 200)
These METALMATE Type P Nylon Insert Nuts have the following specification: Size: M8Finish: Zinc PlatedClass: 8 SteelBox Quantity: 200
£ 8.99 8.99 GBP
Type P Nylon Insert Nut ZP M6 (Box 200)
These METALMATE Type P Nylon Insert Nuts have the following specification: Size: M6Finish: Zinc PlatedClass: 8 SteelBox Quantity: 200
£ 5.15 5.15 GBP
Type P Nylon Insert Nut ZP M5 (Box 1000)
These METALMATE Type P Nylon Insert Nuts have the following specification: Size: M5Finish: Zinc PlatedClass: 8 SteelBox Quantity: 1,000
£ 16.56 16.56 GBP
Type P Nylon Insert Nut ZP M4 (Box 1000)
These METALMATE Type P Nylon Insert Nuts have the following specification: Size: M4Finish: Zinc PlatedClass: 8 SteelBox Quantity: 1,000
£ 15.54 15.54 GBP
Type P Nylon Insert Nut ZP M24 (Box 25)
These METALMATE Type P Nylon Insert Nuts have the following specification: Size: M24Finish: Zinc PlatedClass: 8 SteelBox Quantity: 25
£ 33.87 33.87 GBP
Type P Nylon Insert Nut ZP M20 (Box 25)
These METALMATE Type P Nylon Insert Nuts have the following specification: Size: M20Finish: Zinc PlatedClass: 8 SteelBox Quantity: 25
£ 14.41 14.41 GBP
Type P Nylon Insert Nut ZP M16 (Box 50)
These METALMATE Type P Nylon Insert Nuts have the following specification: Size: M16Finish: Zinc PlatedClass: 8 SteelBox Quantity: 50
£ 14.40 14.4 GBP
Type P Nylon Insert Nut ZP M14 (Box 100)
These METALMATE Type P Nylon Insert Nuts have the following specification: Size: M14Finish: Zinc PlatedClass: 8 SteelBox Quantity: 100
£ 20.51 20.51 GBP
Type P Nylon Insert Nut ZP M12 (Box 100)
These METALMATE Type P Nylon Insert Nuts have the following specification: Size: M12Finish: Zinc PlatedClass: 8 SteelBox Quantity: 100
£ 13.58 13.58 GBP
Hexagon Lock Nut ZP M20 (Box 100)
These METALMATE Hexagon Lock Nuts have the following specification: Size: M20Finish: Zinc PlatedClass: 4 SteelBox Quantity: 100
£ 28.39 28.39 GBP
Hexagon Lock Nut ZP M16 (Box 100)
These METALMATE Hexagon Lock Nuts have the following specification: Size: M16Finish: Zinc PlatedClass: 4 SteelBox Quantity: 100
£ 13.90 13.9 GBP
Hexagon Lock Nut ZP M12 (Box 200)
These METALMATE Hexagon Lock Nuts have the following specification: Size: M12Finish: Zinc PlatedClass: 4 SteelBox Quantity: 200
£ 15.05 15.05 GBP
Hexagon Lock Nut ZP M10 (Box 500)
These METALMATE Hexagon Lock Nuts have the following specification: Size: M10Finish: Zinc PlatedClass: 4 SteelBox Quantity: 500
£ 25.10 25.1 GBP
High Tensile Set Screw ZP M8 x 90mm (Box 100)
These METALMATE High Tensile Set Screws have the following specification: Size: M8 x 90mmFinish: Zinc PlatedGrade: 8.8 SteelBox Quantity: 100
£ 20.17 20.17 GBP
High Tensile Set Screw ZP M8 x 80mm (Box 100)
These METALMATE High Tensile Set Screws have the following specification: Size: M8 x 80mmFinish: Zinc PlatedGrade: 8.8 SteelBox Quantity: 100
£ 17.96 17.96 GBP

Don't see what you need?

We use over 35 years of experience in the MRO supply sector, enabling us to source and supply the exact product for your project or machinery requirement's, no matter how specialist or common-place it is.

Let Howcroft source it for you