2 x Faithfull Manhole Keys Manhole Keys 170mm (6.6in)

The Faithfull Mini Pipe Bender is pocket sized but powerful. The three-in-one former and guide are calibrated for setting out left, right or offset bends up to 90 on 6, 8 and 10mm outside diameter copper tubing. Purpose built for micro bore central heating and hydraulic pipes.

The Faithfull traditional lead dresser manufactured from straight grain seasoned beech timber. It has rounded corners and a raised handle grip to give plenty of knuckle room when hammering or shaping a large range of ductile materials.

This Faithfull Lead Dresser is used when moulding or dressing sheet lead, copper, zinc, aluminium and other ductile material.Lead dressers have rounded corners with a raised handle to provide sufficient clearance for the users knuckles when hammering.The lead dresser is durable, manufactured from tough high density plastic to withstand hammering on the top, or sides.Specifications: Weight : 450g.Face Dimensions: 50 x 170mm (2 x 6.3/4in).

The Faithfull Cranked Immersion Heater Spanner has been designed to provide a firm non-slip grip on immersion heater elements. The cranked head allows access to heaters that are surrounded by insulation or recessed. Manufactured from high-quality steel.

The Faithfull Box Type Immersion Heater Spanner provides a firm non-slip grip on immersion heater elements. The deep box design allows easy access to heaters that are surrounded by insulation or recessed. Supplied complete with a tommy bar to help provide added leverage when removing over tight elements. Manufactured from high-quality steel.

The Faithfull Flat Immersion Heater Spanner has been designed to provide a firm non-slip grip on immersion heater elements. Manufactured from high-quality steel.

The Faithfull Plumber's Soldering Pad is a high temperature, asbestos free protective heat pad for plumbing, brazing and soldering applications. Ideal for professional soft soldering, brazing and most other plumbing applications, this heavy-duty heat pad will provide protection to surfaces against burn marks and heat damage. For best results always insure the white side of the pad is facing towards the heat source and avoid direct flame contact with the surface of the pad for prolonged periods. If the surface of the pad begins to glow it should be moved slightly so that the flame is redirected to a previously unheated area. The pad also features an easy wipe clean back and has reinforced edging. Recommended for use with Butane, Propane and MAPP gas. Specification Max. Temperature: 1,200CSize: 195 x 300mm

The Faithfull Plumber's Soldering Mat is a high temperature, Asbestos free protective heat mat for plumbing and soldering applications. It is ideal for DIY and light trade use, including soft soldering and most plumbing applications. The heat mat withstands temperatures of up to 550C and will provide protection to surfaces against burn marks and heat damage. For best results, the flame should not come into direct contact with the surface of the mat for prolonged periods. If the surface of the mat begins to glow it should be moved slightly so that the flame is redirected to a previously unheated area. Always use the same side to face the flame to keep the reverse side clean against the surface being protected. If an area is to be exposed to heat for extended periods we recommended the use of two heat mats, layered for improved protection. May be used with both Butane and Propane. Specification Max. Temperature: 550CSize: 250 x 250mm

A robust steel cylinder fitted with a standard CGA600 connection. Higher pressure and hotter flame than mixed gas cartridges. Hot stable gas will provide a working temperature of up to 1520C in conditions down to minus 20C. Ideal for use when brazing or soldering large diameter copper pipes. To be used with FAIGZPROAUTO (Quick Pro Auto Power Torch) and the FAIGZPOWER (Power Torch) and other similar torches that use CGA600 valves.

The Faithfull Quick Pro Auto Power Torch is a powerful, high performance gas torch designed for the professional user and packed with all the features expected from a top of the range product. Features of this torch include automatic piezo ignition, an advanced gas control system that offers both a Dead Mans Handle function and a fine flame adjustment valve with an instant FLARESAFE function, making the torch safe to use at any angle immediately after start up. The burner head creates a swirl effect flame to help ensure that the flame is evenly distributed around a pipe when carrying out plumbing work. This ergonomic designed Swirl torch is ideally suited to skilled plumbing, soldering and brazing work. Specifications: Max. operating temperature: 1,610C.Optimum power output: 1,900 Watt.Gas consumption: 136 g/h.CGA600 Connection.Gas category: MAP/PRO.

The Faithfull Auto Start Blow Torch is a high temperature, all-purpose gas torch designed for home use. The blow torch has an automatic piezo ignition, fine flame adjustment valve and a rapid one minute warm up.The Faithfull torch has a highly ergonomic, shock-resistant polypropylene handle, making it comfortable to use.Suitable for use with Faithfull Tools Butane Propane Mix Gas Cartridges Part nos. FAIGZ350, FAIGZ170 (Not included).Supplied with a stability base. Applications:Soft Soldering, Aluminium Welding, Paint Stripping, Pipe Bending, Loosening Bolts, Defrosting Pipes, Brazing and Lighting Barbecues. Specifications:Max. operating temperature: 1600C.Optimum power output: 1,230 Watts.Gas consumption: 88 g/h.EN417 Connection.

This Faithfull Gas Converter connects a gas cylinders fitted with an EN417 self-sealing valve for use with blow torches with a CGA600 gas connection. Compatible with:FAIGZPROAUTO - Quick Pro Auto Power Torch. WARNING: Make sure the threads of the gas torch and bottle to be used are compatible with this adaptor. Do not use in other applications.

The Faithfull Auto Start Power Torch EN417 is a powerful gas torch designed primarily for use in plumbing and soldering applications. This torch has an automatic piezo ignition and a fine flame adjustment valve with an instant FLARESAFE function, this makes the torch safe to use at any angle immediately after starting up. The workstation neck is designed for hands free operation.It is suitable for use with Faithfull Tools Butane Propane Mix Gas Cartridges - Part nos. FAI GZ350, FAI GZ170 (not included).Supplied with a stability base. Specifications: Max operating temperature: 1,400C.Optimum power output: 1,450 Watt.Gas consumption: 104 g/h.EN417 Connection.

1 x Faithfull Butane Propane Mix Gas Cartridge 350g

1 x Faithfull Butane Propane Mix Gas Cartridge 170g

The Faithfull Multi-Function Gasket Pipe Mitre Shears are designed to cut cleanly and precisely through plastic and rubber. They can be used for cutting rubber gasket, plastic conduit and trunking, window and door seals, decorative trim strips and tile sealing strips. The kit contains a pair of shears with a stainless steel blade and 5 interchangeable aluminium lower jaws. The chrome-plated steel body is fitted with comfortable PVC handle grips and a safety lock. Supplied in a robust plastic storage case with the following jaws: 1 x 17mm 20mm Pipe Cutter Head for cutting plastic conduit. 1 x 27mm Pipe Cutter Head for cutting plastic conduit. 1 x Triangular Head for cutting square conduit and sealing strips. 1 x Slotted Head for general cutting of rubber and plastic gaskets. Max. Cutting Width: 50mm. 1 x Angle Mitre Head for cutting accurate mitres. Marked with 45, 60, 75, 90, 105, 120 angles and graduated to 50mm and 2in.

1 x Faithfull Adjustable Basin Wrench 25 - 50mm

1 x Faithfull Adjustable Basin Wrench 6mm - 25mm

Supplied in a 750gm tub.

Supplied in a 1.5Kg tub.

P18 GAS LEAK DETECTOR is a specially formulated micro porous foam designed specifically to identify even the smallest, gaseous leak. It is suitable for use with most gases and is compatible with paintwork, metals, wood and most plastics. This product is designed to be used to trace costly and potentially dangerous gas leaks *Suitable for most gas types. *Fast and easy to apply.*CFC free. *Directional tube for hard to reach places. *Detecting leaks in pressurised pipe systems.*Suitable for use with most gas types including natural and town gas, compressed air, butane, propane, acetylene, chlorine gas, hydrogen and oxygenSize 400ml

Everbuild EVBP16PIPE is a PVC pipe cement is a non-drip, thixotropic solvent based pipe cement and combines a long open time with a rapid rate of bond strength development. Conforms to BS26209. The Everbuild P16 product is designed specifically for the following applications. Bonding uPVC and ABS non-pressure pipes to themselves and each other, i.e. uPVC soil and ventilating pipes, fittings, and accessories conforming to BS4514; uPVC rainwater piping/goods conforming to BS4576; uPVC underground drainpipes and fittings BS4660; ABS or uPVC waste pipes and fittings conforming to BS55255. Size 250ml

Formerly PROTEX by Purimachos EVERBUILD P14 SYSTEM INHIBITOR is a multi-purpose treatment, specifically designed to protect the entire central heating system from scale, sludge and corrosion. *WRAS Approved formulation.*BuildCert Performance Standard*Compatible with all EVERBUILD central heating products. *Does not contain mineral oil.*compatible with plastic and fibreglass header tanks and with all metals used in central heating systems which includes iron, copper, steel, brass and aluminium. *Suitable for microbore systems constructed from plastic pipes. *New and existing central heating systems.*Extensions to existing systems.

Everbuild Central Heating P11 System Cleanser Concentrate will remove commissioning and flux residues from new systems and restore circulation to old systems which suffer from sludge. Everbuild P11 System Cleanser should also be used when components are replaced or existing systems are extended. This product is compatible with plastic tanks, micro bore and all metals (including aluminium) used in central heating systems. It is very economical as 1 litre will treat a 100 litre system capacity in new and existing central heating systems or extensions to existing systems. Size : 1 litre.

Designed for the progressive reduction of the pipe diameter. For stainless steel pipe up to 0.8mm (1/32in). Length: 265 mmWeight: 554g Special features: Ergonomic design with special soft grip handles.Swaging up to 52 mm

The Coleman C300 Performance Gas offers a (70/30) Butane/Propane gas mixture, providing a steady and consistent burn across a wide range of temperatures at lower altitudes, making it ideal for general use. The threaded cartridge features Colemans double safety resealable valve, this means that the cartridge can be disconnected and reconnected to your device, without leakage. Caution: This Product is Highly Flammable.

1 x Bailey Z5697 Lockfast Brush 400mm (16in)

1 x Bailey Z5696 Lockfast Brush 350mm (14in)

1 x Bailey Z5695 Lockfast Brush 300mm (12in)

1 x Bailey Z5694 Lockfast Brush 250mm (10in)

1 x Bailey Z5693 Lockfast Brush 225mm (9in)

1 x Bailey Z5692 Lockfast Brush 200mm (8in)

1 x Bailey Z5691 Lockfast Brush 150mm (6in)

1 x Bailey Z5690 Lockfast Brush 100mm (4in)

1 x Bailey Z5689 Universal Brush 400mm (16in)

1 x Bailey Z5688 Universal Brush 350mm (14in)

1 x Bailey Z5687 Universal Brush 300mm (12in)

1 x Bailey Z5686 Universal Brush 250mm (10in)

1 x Bailey Z5685 Universal Brush 225mm (9in)

1 x Bailey Z5684 Universal Brush 200mm (8in)

1 x Bailey Z5683 Universal Brush 150mm (6in)

1 x Bailey Z5682 Universal Brush 100mm (4in)

Bailey Force Cup (sink plunger) For plunging sinks/basins.Size: MediumLength: 30cm (12in)Diameter: 10.2cm (4in)

This BAI4074 drain test kit is an off-the-shelf solution for the completion of air tests to 4in (100mm) water gauge pressure on drains and pipes. Contains: 1 x 4in U-Gauge1 x 9ft Tube1 x Hand Bellows1 x Y-Piece1 x 1/2in Test Nipple Cap1 x 1in Test Nipple Cap

The Baileys BAI3592 Drain Tracing Dyes is 8 ounces (200 grammes)Colour: PurplePart No: 3592Dilution Rates Litres: 12-14,000

The Baileys BAI3591 Drain Tracing Dyes is 8 ounces (200 grammes)Colour: YellowPart No: 3591Dilution Rates Litres: 10-12,000

The Baileys BAI3590 Drain Tracing Dyes is 8 ounces (200 grammes)Colour: RedPart No: 3590Dilution Rates Litres: 12-15,000

The Baileys BAI3589 Drain Tracing Dyes is 8 ounces (200 grammes)Colour: GreenPart No: 3589Dilution Rates Litres: 15-20,000

Size 450mm (18in)

Size 375mm (15in)

Size 300mm (12in)

Size 250mm (10in)

Size 200mm (8in)

Size 225mm (9in)

Centre locking drain test plugs with steel plates, brass wing nuts and brass blanking caps. Suitable for air or water testing of drains and sewers. Size: 100mm (4in).

The Baileys BAI1992 Drain Tracing Dyes is 8 ounces (200 grammes)Colour: BluePart No: 1992Dilution Rates Litres: 12-14,000

This Bailey 1989 Y piece is the link between the hand bellows, U gauge, and test nipple via the rubber tubing.

This Bailey 1988 U gauge tube must be connected to the nipple via a Y piece, U-gauge, and hand bellows for the successful completion of air tests. Specification: Length: 1 metre.

This Bailey 1986 Drain testing U Air Gauge is suitable for use in testing drains and sewers. Specification: Size: 100mm (4in).

These Bailey 1985 hand bellows are used for drain testing, by pumping air into a sealed pipe and U gauge. The pressure will return to zero quickly if there is a leak in the section.

Size 225mm (9 in)Maximum inflation pressure 0.27 bar / 4 psi

Size 150mm (6 in)Maximum inflation pressure 0.40 bar / 6 psi

Size. 100mm (4 in)Max inflation pressure 0.68 bar / 10 psi

Size 75mm (3 in)

Size 150mm (6 in)

Size 100mm (4 in)

Size 150mm (6in).

Size 100mm (4 in).

This Bailey 1779 Lockfast Double Worm Screw pierces blockages such as paper or rags, and the obstruction is drawn back to clear the pipe. Specifications: Size: 2in.Type: Lockfast.

Size 150mm (6 in).

The Bailey 1771 Lockfast Drop Scraper, 100mm/4in, is perfectly made to glide over small obstructions and it drops into a vertical scraping position to allow offending material to be dragged back towards the operator, to make to job much tidier. Use with Lockfast Drain Rods. Specification: Size: 100mm (4 in).

This Bailey 1770 Universal Clearing Wheel guides drain rods around difficult bends and removes minor blockages by pushing material clear.Type: Lockfast.

Size 150mm (6 in).

Size 100mm (4 in)

Universal Double Worm Screw that pierces blockages such as paper or rags, and the obstruction is drawn back to clear the pipe.Size: 2in.

Size: 6 in.

Size: 4 in.

This Bailey 1740 Universal Clearing Wheel guides drain rods around difficult bends and removes minor blockages by pushing material clear.Type: Universal.

Size 1 in x 6ft.

Size 1 1/8 in x 3ft.

Size 1 in x 3ft.

Size 7/8 in x 3ft.

Size 3/4 in x 3ft.

Size 1 1/8 in x 3ft.

Size 1 in x 3ft.

Size 7/8 in x 3ft.

Size 3/4 in x 3ft.

Bailey 1471 Universal 3/4in Drain Cleaning Set, complete with four tools, for clearing and cleaning drains. Rods fitted with this type of joint should only be rotated in a clockwise direction. Contents: 10 x Blue Rods 3ft x 3/4in2 x Straps 12in1 x Clearing Wheel1 x Drop Scraper 4in1 x Plunger 4in1 x Double Worm Screw 2in

Bailey 1470 Universal 3/4in Drain Rod Set with blue polypropylene drain rods. Rods fitted with this type of joint should only be rotated in a clockwise direction. Contains the following: 10 x Blue Rods 3ft x 3/4in 2 x Straps 12in1 x Plunger 4in1 x Double Worm Screw 2in

Lockfast blue polypropylene Drain Rod Set. Contents: 10 x Blue Rods 3ft x 3/4in2 x Straps 12in1 x Plunger 4in1 x Double Worm Screw 2in1 x Clearing Wheel1 x Drop Scraper 4in

Baileys Lockfast rods can be rotated in either direction and will remain secure in the most demanding conditions. The rods are manufactured from high grade polypropylene, complete with solid brass joints. The set contains the following: 10 x Blue Rods 3ft x 3/4in 2 x Straps 12in1 x Plunger 4in1 x Double Worm Screw 2in

The Bahco 9-in-1 Switch Cabinet Master Key is suitable for all the usual technical shut-off systems. It has a varnished plastic body with a practical securing chain and snap-hook. The key profiles are zinc die-cast for increased durability. The Master Key has 8 different keys, which are fitted on a double turning mechanism, allowing good positioning. In addition, the body houses a 5mm square key suitable for aerating radiator valves and a 1/4 inch magnetic bit holder. It has the following functions: 4 x Square: 5, 6, 7-8 9-10mm. 3 x Triangular: 7, 8-9 10-11mm. 1 x Two-way: 3-5mm. 1 x Half-moon: 6mm.

The Bahco 5-in-1 Switch Cabinet Master Key is suitable for all the usual technical shut-off systems. It has a varnished plastic body with a practical retaining clip and the key profiles are zinc die-cast for increased durability. The Master Key has 4 different keys, which are fitted on a double turning mechanism, allowing good positioning. In addition, the body houses a magnetic 5mm square and 1/4in bit holder, and a magnetic pocket for 1/4in bits in 7-8mm square profile. It has the following functions: 3 x Square: 5, 6 7-8mm. 1 x Triangular: 9mm. 1 x Two-way: 3-5mm.

The Bahco Radiator Valve Ratchet Set for installation and removal of heating valve nipples, tank connectors and short tap extensions. It comes with all the fittings, covering from small to large. Stepped along the length of the key for different internal hexagon and internal lug valve sizes. All components in the set have a chrome plated surface finish. Contains: 1 x Ratchet, 1 x Square Drive and 1 x Stepped Key in a practical plastic pouch. Conforms to ISO 3315 / DIN 3122 / ISO 1174-2 / DIN 3120 Sizes Covered: 3/8, 7/16, 1/2, 3/4 1in

The Bahco 402-35 Pipe Cutter is suitable for cutting copper, aluminium, copper-zinc alloy, steel and stainless steel. Its cutting wheel is mounted on a pin with a ball for quick and easy replacement. Roller bearings provide smooth cutting wheel movement. The support wheels are coated to avoid tube contamination.The pipe cutter has a specially designed knob to allow easy adjustment. Capacity: 3-35mm

The Bahco 401-16 Pipe Cutter is suitable for cutting copper, aluminium, copper-zinc alloy, steel and stainless steel. Its cutting wheel is mounted on a pin with a ball for quick and easy replacement. The support wheels are coated to avoid tube contamination. The pipe cutter has a specially designed knob to allow easy adjustment. Capacity: 3-16mm

Bahco 370-4 Chain Strap Wrench with high strength, positive grip for tightening big tubes without the removal of the chain. It is designed to operate in narrow spaces and features a special jaw design which allows the wrench to operate in two directions. The jaws are long-lasting serrated induction hardened. Length: 300mm (12in).Capacity: 110mm (4 1/4in).Weight: 780g.

Bahco Telescopic basin nut wrench with a reversible jaw for accessing nuts on wash basins, bath tubs, sinks or bidets. With 4 adjustment sizes. Length: 280 to 460mm (telescopic) Capacity: 10 to 32mm

Bahco 317-40 Plastic Wheel Reamer is a light series reamer for removing burrs from external and internal tube ends. Size: 3-40mm tube.