Impact-resistant polystyrene plastic level that will withstand temperatures between -15C and60C. Unbreakable, highly transparent and durable block vials with a luminous reflector on the horizontal vial. It also has a V-groove to enable use on pipes. Sensitivity of 10 mm/m and a tolerance in normal position of 1.0 mm/m. The vial fluid is a low viscosity, coloured oil mixture that gives the bubble the best possible conditions for movement and is resistant to UV light and temperature fluctuations. The bubble is not affected by static electricity as the fluid is anti-static.

An impact-resistant ABS plastic level that will withstand temperatures between -15C and60C. It has impact-resistant tubular vials with extremely high transparency and durability. Sensitivity of 13 mm/m and a tolerance in normal position of 1.5 mm/m. The vial fluid is a low viscosity, coloured oil mixture that gives the bubble the best possible conditions for movement and is resistant to UV light and temperature fluctuations. The bubble is not affected by static electricity as the fluid is anti-static.

Length 800mm (31in)

Length 600mm (24in)

Length 400mm (16in).

Length 300mm (12 in)

Length 1800mm (71in)

Length 1500mm (59in)

Length 1200mm (47in)

Length 1000mm (39in)

An extra robust aluminium level with highly transparent and durable unbreakable block vials. The horizontal luminous vial magnifies at30%. Impact absorbing secure end guards. Sensitivity of 10mm/m and a tolerance in normal position of 0.5 mm/m (inverted 0.5 mm/m). The vial fluid is a low viscosity, coloured oil mixture that gives the bubble the best possible conditions for movement and is resistant to UV light and temperature fluctuations. The bubble is also not affected by static electricity as the fluid is anti-static.1 x Hultafors PV 120 Professional Spirit Level 3 Vial 120cm

Red, impact-resistant plastic level with 2 right-angled vials. Ideal for checking the incline of 2 horizontal surfaces simultaneously. Made from ABS plastic which makes the level both light and durable. The tube vials are made of Plexiglas.

The Faithfull Water levels utilise the principle that water will always find its own level. They are very accurate instruments that are used widely throughout the construction and building industries.Easy to set up while speedy and simple to use, they are designed for single-handed use when simultaneously measuring equal heights at two distant points.A water level is the ideal tool for accurate unsighted room to room measurement or distant levelling, when using a spirit level would be ineffective.Other applications include working on wall tiling, guttering, landscaping, patios, driveways, fencing and drainage projects. This low-cost water level is accurate to 1mm at 10 metres.Virtually unbreakable graduated tubes and vent caps. Tube Length: 10m (33ft)

This Faithfull Prestige Professional Heavy-Duty Spirit Level has the following specification: Length: 60cm (24in).Section Size: 29 x 68mm.3 Vials: 90, 180 and 90.Accuracy: 0.5mm/m.

The Faithfull Prestige Professional Heavy-Duty Scaffold Level is ideal for use by scaffolders, pipefitters and steel erectors. The strong, die-cast aluminium body has a black powder-coated finish and is shaped for easy handling. Two solid acrylic vials (180 and 90) offer professional accuracy to 0.5mm per metre. This heavy-duty level has a milled base with 2 recessed rare earth magnets that allow attachment to steel surfaces for hands-free use. The base also features a V-groove for easy location on pipes. Specification: Size: 250 x 50 x 20mm.2 Vials: 180 and 90.Accuracy: 0.5mm/m.

This Faithfull Prestige Professional Heavy-Duty Spirit Level has the following specification: Length: 180cm (72in).Section Size: 29mm x 68mm.3 Vials: 90, 180 90.Accuracy: 0.5mm/m.

This Faithfull Prestige Professional Heavy-Duty Spirit Level has the following specification: Length: 120cm (48in)Section Size: 29mm x 68mm3 Vials: 90, 180 90Accuracy: 0.5mm/m

This Faithfull Box Level Set contains the following: 1 x 60cm (24in) Box Level 3 Vial1 x 120cm (48in) Box Level 3 Vial1 x 10cm (4in) Magnetic Mini Level 1 Vial The Mini Level has a magnetic and V-grooved base for use on pipework and scaffolding, and has an accuracy of 1.0mm/m.

1 x Faithfull Box Level 3 Vial 60cm (24in)

1 x Faithfull Box Level 3 Vial 180cm (72in)

1 x Faithfull Box Level 3 Vial 120cm (48in)

1 x Faithfull Box Level 3 Vial 100cm (40in)

This Faithfull specialist level is designed to ensure fence posts are upright prior to fixing. Other uses include plumbing pipes, levelling of RSJs and other applications where a vertical and horizontal is needed. The durable plastic angle plate has 2 acrylic horizontal vials and 1 vertical vial that are accurate to 1.75mm per 1m = 0.1 . There are 2 fixing methods:1. Elastic strap for non-magnetic surfaces.2. Magnetic base for use on RSJs and steel fence posts. Size: 140 x 90 x 90 mm.

1 x Bahco 466-600 Box Spirit Level 60cm

The Bahco 466-250 Scaffolders Level has a solid anodised aluminium body with one vertical and one horizontal vial. Its open frame design, makes it easier to handle. With 45 and 30 angles preset for quick angle setting. It has a rare earth magnetic material base and machined surfaces. Offers high precision, 0.5 mm per metre accuracy.

1 x Bahco 466-2000 Box Level 200cm

1 x Bahco 466-1800 Box Spirit Level 180cm

1 x Bahco 466-1200 Box Spirit Level 120cm

1 x Bahco 466-1000 Box Spirit Level 100cm

The Bahco 426TOR9 Torpedo Level is made from solid aircraft grade aluminium with 3 vials, plumb, horizontal and 45. Uses rare earth magnets on its base. With machined surfaces and 'V' groove base for use on pipes. It offers permanent precision of 0.5 mm per metre.

The Bahco 416 Series Spirit Levels are made from lightweight aluminium with a 1.4mm wall thickness profile. They have unbreakable vials filled with liquid resistant to UV light and extreme temperatures. Two lines in each side of flat vial for easier use. The set contains the following sizes: 1 x 416-600 Spirit Level 1 Vertical 1 Horizontal Plumb1 x 416-1200 Spirit Level 1 Vertical 2 Horizontal Plumb1 x 416-1800 Spirit Level 1 Vertical 2 Horizontal Plumb Specification: Measuring Accuracy: in the normal position 0.029 = 0.5mm/m, overhead measurement 0.043 = 0.75mm/m

BlueSpot Magnetic Torpedo Level with a sturdy plastic body and aluminium frame for increased durability. Ideal for small building projects. Magnetic base allows for hands-free operation. Features three spirit level vials set at horizontal, vertical and 45 angles. Includes mini level with a magnetic base and horizontal spirit level vial.

This Stabila 81S-10ML Magnetic Torpedo Level is supplied loose.

The Stanley STA 1-43-524 FatMax Level is 600mm (24in) in length.

The STANLEY FatMax Pro Torpedo Level has a a die-cast aluminum body for long lasting durability. The solid block vial provides accuracy of 0.5mm/m (0.0005in/in), and a 180-degree rotating vial is designed to duplicate angles. It includes a magnified center vial for improved visibility. Its magnetic base features a pipe groove for use on rounded surfaces. Ideal for scaffolders, plus it is also perfect for installing machinery, air conditioning ducting or shelving.

The Faithfull SL250 scaffold level has a strong die-cast body which is shaped for easy handling and is ideal for scaffolders, pipe fitters and steel erectors. A milled base with flush mounted magnets permits hands free measuring on steel surfaces. The solid acrylic vials are accurate to 1 mm per metre. 3 vials: horizontal, vertical and 45. Length: 240 mm (9.1/2in).

1 x Bahco 466-400 Box Spirit Level 40cm

The Stabila REC 300 Receiver has two displays: one each on the front and back for fast measuring and taking readings in any position. Digital display of the reference deviation in mm, in, in (fractions) and ft. Allowing you to read the deviation from the reference height directly in figures, for faster and more precise correction of strut positions and concrete levels. A series of symbols indicate your distance from the reference height and whether you are too high or low. Two sensitivity levels simplify setting-up over longer or shorter distances. If you also switch on the acoustic signals, you can select two volume levels. Its loud signal can be heard even with a loud background noise. Compatible with: LAR200, LAR250, LAR300 and LAR350 lasers.

Stabila OLS 26 Optical level with a 26-fold magnification in optical system. No batteries required to use with the focusing and easily accessible adjusting screw. It has a robust IP54 protection rated casing with easy-grip, shock-absorbing soft shell and solid protection of optical unit. Supplied with: 1 x Geo-folding Rule 2m, 1 x Plumb Line, Rain Protection, Adjusting Tools and 1 x Robust Carry Case. Specification: Accuracy of Height (Single Measurement): 1mm/10mMin. Focussing Distance: approx. 1mObjective Lens Aperture: 38mmStandard Deviation: < 2mm/kmMagnification: 26-foldProtection Class: IP 54

The Stabila LT30 Telescopic Laser Pole allows for variable positioning of lasers at various working heights, anywhere between 20-365cm. Includes a laser platform with 1/4 and 5/8in threads, making it truly universal. The pole can also be used as a prop.

The Stabila LD 520 Laser Distancer is a compact measuring device with easy to operate measuring functions. Including: length, area, volume, timer, calculator, indirect distance, inclination, triangular area measurement, continuous measurement, indirect height measurement, inclined objects, trapezoidal measurement, elevation profile measurement and stake-out function. It also has a memory function that stores and recalls the previous 30 measurements. Has a digital target locator's using a built-in camera with crosshairs and allows distances of up to 200m to be measured. The 360 inclination sensor provides flexible measurement from any position (displays 180). Allows absolute horizontal measurements to be made and is also the basis for several new functions. It has a 61mm colour display with a 4x zoom and high resolution for pin-sharp images even in strong light. A built-in calculator that enables measurements to be multiplied or divided by fixed values (e.g. hourly rates or material costs). This provides usable calculated figures, to make meaningful quotations on site. With a robust, impact-resistant housing and a shock-absorbing soft-grip cover. In addition, it has IP54 class protection against rain and dust. Integrated Bluetooth Smart technology enables measurement data to be wirelessly transferred from the laser to a smartphone or tablet. The free 'Stabila Measures' App allows measurements to be transferred directly to photos of the building site or drawings. Specification: Accuracy:1.0mm.Operating Range: 0.05-200m.Power: 2 x AAA batteries (supplied).Protection Class: IP54 (dust rain).Laser Class: 2.Laser Wavelength: 635nm.

The Stabila LD 320 Laser Distancer is a compact measuring device with easy to operate measuring function. Including: length, area, volume, tracking (continuous measurement), Pythagoras with 2 or 3 measuring points and min/max tracking. With a large, backlit screen and large readout making it easy to read in any environment. Its impact-resistant housing with shock absorbing soft grip casing provide excellent durability for the worksite. Provides all the measuring technology that most craftsmen need on the building site. Fulfils the international standard ISO 16331-1 certification for repeatable accuracy. Specification: Accuracy:1.5mmOperating Range: 0.05-60mPower: 2 x AAA batteries (supplied)Laser Class: 2Laser Wavelength: 635nm

The Stabila LD 220 Laser Distancer is a compact, easy-to-use laser with 4 basic measuring functions: length, area, volume and continuous measurement. It has a large, back lit screen with large readout making it easy to read in any environment. With an impact-resistant, IP54 rated housing with shock-absorbent soft-grip casing. The laser delivers quick measurement results and assists in daily work, e.g. calculating how much material is needed. Specification: Accuracy:3.0mm.Operating Range: 0.2-30m.Power: 2 x AAA batteries (supplied).Protection Class: IP54 (dust water splash).Laser Class: 2.Laser wavelength: 635nm.

The Stabila LAX 50 G Cross Line Laser is self-levelling for working quickly and directly on the laser lines. It uses STABILA GREENBEAM technology that has especially bright, fine, green laser lines for optimum visibility which is up to 30% sharper than red lasers up to 30m. The rotating multipurpose platform allows for flexible positioning on the floor or tripods (1/4in and 5/8in threads), as well as on metal objects with the strong rare earth magnetic system. Kit includes: Multipurpose platformBelt pouch for easy transport and storage3 x AA batteries Specification Level Accuracy: 0.5mm/m.Working Range: 30m.Power: 3 x AA batteries (supplied).Tripod Thread: 1/4in 5/8in.Protection Class: IP53.Operating Life: up to 7 hours.

The Stabila LAX 50 projects crossed horizontal and vertical lines in a matter of seconds - both perfectly levelled. Ready for all internal work, the result - long, easily visible horizontal and vertical laser lines at right angles to each other which make setting-out easy. For the installation of built-in furniture, laying tiles, wallpapering and all installation work. Setting out without a single pencil mark - that's clean working! Supplied with a combined tripod / telescopic leg kit. Unscrew the tripod legs and screw together to form the telescopic leg - fix the LAX50 to the leg - and measure! The tripod covers a space of 0.6-1m. The telescopic leg can be fixed between floor/ceiling heights of up to 2.75m. If the LAX50 is placed on the ground, its working height is 7cm. Its versatility makes the STABILA LAX50 a regular partner for many applications. Specification Level Accuracy:± 0.5mm/mSelf-Levelling Range: 4± 0.5Working Range: 10mPower: 3 x AA batteries (supplied)Average Battery Life: 30 HoursTripod Thread: 1/4inLaser Class: 2

The Stabila LAX 400 Multi-Line Laser rotates horizontally through 360 for line marking and levelling around an entire room. It has a manual alignment function, where two lines form a 90 angle. With fine adjustment, the laser lines can be pivoted to a target position without losing the position of the plumb-line dot. The laser has a vertical beam which is directed downwards and is clearly visible through the adjustable feet. Above, the two vertical lines intersect precisely over the plumb line dot. The LAX400 is ideal for transferring a layout from floor to the ceiling and for quick and accurate plumb bobbing. It has a shock-absorbent soft-grip case. Specification Level Accuracy:± 0.3 mm/m.Self-Levelling Range:± 4.0.Working Range: 20m.Power: 4 x AA batteries (supplied).Average Battery Life: 10 Hours. Tripod Thread: 1/4in.Laser Class: 2.Line Straightness:± 0.2mm/m, 90 Angle Precision:±0.3mm/m.Protection Class: IP54 rated, against splash dust damage.

The Stabila LAX 300 G Cross Line Laser Level is the ideal partner for interior construction professionals who need accurate laser lines with optimum visibility. The innovative STABILA GREENBEAM technology provides razor-sharp, extremely bright laser lines. You can perform plumb-line and levelling work on the floor, wall and ceiling, all at the same time. The laser produces 1 horizontal line, 1 vertical line and plumb-line dots, upwards and downwards. The vertical line almost covers the entire room. It has a quick self-levelling function and pendulum technology that has been designed specifically for the construction site. With easy to change functions, via the single-button operation. Fitted with energy-saving laser diodes that provide an operating time of up to 15 hours. Can be used directly on the floor, attached to a tripod (1/4in thread) or fastened to metallic objects/wall bracket by its rare earth magnet. The compact housing features an extendable foot for height adjustment and working directly on U-profiles. With shock absorbent STABILA soft grip casing that is IP54 rated, against splash and dust damage. The laser can be pivoted 360 inside the housing. Supplied with: 1 x Target Plate, 1 x Wall Bracket, 1 x Belt Pouch 3 x AA 1.5V Batteries Specification: Level Accuracy: 0.3mm/m.Self-Levelling Range: 4.5.Working Range: 30m.Power: 3 x AA batteries (supplied).Average Battery Life: 15 Hours.Tripod Thread: 1/4in.Laser Class: 2.Line Straightness:± 0.2mm/m.Protection Class: IP54 rated, against splash dust damage.

The Stabila LAX 300 Cross Line Laser Level is ideal for marking out floors, walls and ceilings. It has 3 functions and a visible line range of 20m with a red laser diode. Has 3 lines: one horizontal line, one upwards vertical line, and one downwards plumb-line make the laser well suited for the transfer of the layout from floor to roof. The laser also allows quick and precise plumbing. A very bright, narrow and clear laser line is visible up to 20m. The laser can be rotated through 360 in its housing and can be used directly on the floor, attached to a tripod (1/4in thread), fastened to metallic objects by its rare earth magnet and V-groove or secured by the metal lugs using a strap. The laser level has a shock-absorbent STABILA soft-grip casing, providing high protection (class IP 54). There is optimal protection of the optical equipment against dust and scratches by rotation inside the U-shaped housing. Thanks to the pulsed laser lines, the LAX 300 can be used both inside and out. Specification Level Accuracy:± 0.3 mm/m.Self-Levelling Range:±4.5.Working Range: 20m.Power: 3 x AA batteries (supplied).Average Battery Life: 20 Hours. Tripod Thread: 1/4in.Laser Class: 2.Line Straightness:± 0.2mm/m.Protection Class: IP54 rated, against splash dust damage.

The Stabila LAR 350 Rotation Laser is a fully automatic motor-driven rotation laser for horizontal and vertical applications, as well as manual inclination in 2 axes. With innovative motion control for quick, reliable and convenient laser operation via the supplied remote control. It has several useful functions, including: Dual slope inclination function, which allows for controlled inclination setting of up to 5 on 2 axes; Section mode enables you to set up a working area, meaning that the laser beam is only emitted in a defined area; Manual alignment function provides a pivoting axis in vertical operation; The integrated LED assist system allows for easy operation and safety in the workplace. It alerts the user at various points, for example, which axis is currently tilted or is being tilted. The body of the laser is IP65 rated, dust and waterproof. It also incorporates the patented STABILA PROTECTOR system, which offers maximum protection, even when the laser is dropped from a tripod at a height of up to 1.80m. Supplied with the Stabila REC300 Receiver which has 2 displays: one each on the front and back with digital display of the reference deviation in mm, inches in (fractions) and ft. Allowing you to read the deviation from the reference height directly. Acoustic guidance with selectable volume and a series of symbols will indicate your distance from the reference height and whether you are too high or low. Its loud signal can be heard even with loud background noise. Also supplied with: 1 x RC-LAR 350 Remote Control, 1 x BST-S Construction Tripod, 1 x NL Levelling Rod, 1 x 90 Angle Rail, 1 x Laser Goggles, 1 x Target Plate, 1 x Carrying Case, 2 x D 1.5V Batteries and 4 x AA 1.5V Batteries. Specification: Levelling Accuracy:0.10mm/mRange: 800mSelf-Levelling Range:5Laser Class: 2Operating Life: 80 hoursPower: 2 x 1.5V D Cell batteries (supplied)Protection Class: IP65Tripod Connection: 5/8in

The Stabila LAR 350 Rotation Laser is a fully automatic motor-driven rotation laser for horizontal and vertical applications as well as manual inclination in two axes. With innovative motion control for quick, reliable and convenient laser operation via the supplied remote control. It has several useful functions, including: Dual slope inclination function allows for controlled inclination setting of up to 5 on two axes. Section mode enables you to set up a working area, meaning that the laser beam is only emitted in a defined area. Manual alignment function provides a pivoting axis in vertical operation. The integrated LED assist system allows for easy operation and safety in the workplace. It alerts the user at various points, for example, which axis is currently tilted or is being tilted. The body of the laser is IP65 rated, waterproof and dustproof. It also incorporates the patented STABILA PROTECTOR system, offers the maximum protection, even when the laser is dropped from a tripod at a height of up to 1.80m. Supplied with the Stabila REC300 Receiver which has two displays: one each on the front and back with digital display of the reference deviation in mm, inches in (fractions) and ft. Allowing you to read the deviation from the reference height directly. Acoustic guidance with selectable volume and a series of symbols, will indicate your distance from the reference height and whether you are too high or low. Its loud signal can be heard even with a loud background noise. Also supplied with: 1 x RC-LAR 350 Remote Control, 1 x 90 Angle Rail, 1 x Pair of Laser Goggles, 1 x Target Plate, 2 x 1.5V D Cell Batteries, 4 x 1.5V AA Batteries. Specification: Levelling Accuracy:0.10mm/mRange: 800mSelf-Levelling Range: 5Laser Class: 2Operating Life: 80 hoursPower: 2 x 1.5V D Cell batteries (supplied)Protection Class: IP65Tripod Connection: 5/8in

The Stabila LAR 300 Rotation Laser is a fully automatic, motor-driven rotation laser for horizontal applications. Always ready for use thanks to its fast self-levelling operation, within 10 seconds. Exceptionally easy to operate, with just the touch of a button. The STABILA PROTECTOR system makes this laser extremely durable, even when the laser is dropped from a tripod, up to 1.8m. Just set up the tripod again, switch on and carry on measuring. Waterproof and dustproof in accordance with protection class IP65. Resistant to heat and cold from -10C to60C. There is also a 5/8in thread, ideal for attaching to a tripod. It has a large working area when used with the set receiver, up to 800m in diameter. Correct heights quickly, direct reading of deviations from the reference plane on the receiver display with millimetre accuracy. The receiver offers visual and acoustic guidance, as well as two displays. Supplied with: 1 x REC 300 Digital Receiver, 2 x D 1.5V Batteries, 2 x AA 1.5V Batteries and 1 x Carrying Case. Quality and precision, made in Germany. Specification: Laser Type: RedAccuracy: 0.1mm/mDiameter of Working Area with Set Receiver: 800mLaser Class: 2Laser Wave Length: 635nmIP Rating: IP65

The Stabila LAR 160 Rotation Laser has a high levelling accuracy of 0.1mm/m, fast self-levelling within 20 seconds. Fully automatic with four laser functions: horizontal and vertical rotation, plumb line function and right angle (90) in vertical operation. Easy to use, via three control buttons: on/off, tilt mode and manual mode. Covered with a shock-absorbent soft grip casing that provides protection against impacts whilst the stable housing cover protects the laser optics. Dustproof and waterproof to IP65. With two integrated 5/8in threads in the housing, for horizontal and vertical tripod use. Supplied with: 1 x BST-S Construction Tripod, 1 x NL Levelling Rod, 1 x REC 160 RG Receiver, 1 x Laser Goggles, 1 x Target Plate, 2 x D 1.5V Batteries, 2 x AA 1.5V Batteries and 1 x Carrying Case. Specification: Laser Type: RedAccuracy: 0.1mm/mDiameter of Working Area with Set Receiver: 600mLaser Class: 2Laser Wave Length: 635nmIP Rating: IP65

The Stabila LAR 160 Rotation Laser has a high levelling accuracy of 0.1mm/m, fast self-levelling within 20 seconds. Fully automatic with four laser functions: horizontal and vertical rotation, plumb line function and right angle (90) in vertical operation. Easy to use, via three control buttons: on/off, tilt mode and manual mode. Covered with a shock-absorbent soft grip casing that provides protection against impacts whilst the stable housing cover protects the laser optics. Dustproof and waterproof to IP65. With two integrated 5/8in threads in the housing, for horizontal and vertical tripod use. Supplied with: 1 x REC 160 RG Receiver, 1 x Laser Goggles, 1 x Target Plate, 2 x D 1.5V Batteries, 2 x AA 1.5V Batteries and 1 x Carrying Case. Specification: Laser Type: RedAccuracy: 0.1mm/mDiameter of Working Area with Set Receiver: 600mLaser Class: 2Laser Wave Length: 635nmIP Rating: IP65

The Stabila LAR 160 G Rotation Laser has a high levelling accuracy of 0.1mm/m, fast self-levelling within 20 seconds. Fully automatic with four laser functions: horizontal and vertical rotation, plumb line function and right angle (90) in vertical operation. Easy to use, via three control buttons: on/off, tilt mode and manual mode. Covered with a shock-absorbent soft grip casing that provides protection against impacts whilst the stable housing cover protects the laser optics. Dustproof and waterproof to IP65. With two integrated 5/8in threads in the housing, for horizontal and vertical tripod use. Utilises Stabila Greenbeam technology for improved visibility of the rotating laser beam. Green laser beams are 4x more visible to the human eye than red beams. Supplied with: 1 x REC 160 RG Receiver, 1 x Target Plate, 2 x D 1.5V Batteries, 2 x AA 1.5V Batteries and 1 x Carrying Case. Specification: Laser Type: GreenAccuracy: 0.1mm/mDiameter of Working Area with Set Receiver: 600mLaser Class: 2Laser Wave Length: 510-530nmIP Rating: IP65

The Stabila LA 180 L Multi-Line Laser with Auto Alignment function: receiver automatically controls fine alignment of the laser up to 40m. Automatic axis transfer and creation of right angles. Pulsed laser lines for exact height measurements with the receiver (up to 100m) indoors and outdoors. 3 vertical lines, 1 horizontal line and plumb line function. Level Accuracy: 0.07mm/mSelf-Levelling Range: 5.0Line Straightness:0.1mm/m90 Angle Precision: 0.2mm/mLaser Beam Accuracy: 0.2mm/m Power: 4 x 1.5V D Cell 1 batteries.Protection Class: IP54

The Stabila FLS 90 Floor Line Laser allows fast and clean work, whether laying floor tiles, parquet, laminate, carpeting or PVC. Its floor-line optics focus the laser lines and direct them along the floor surface. This innovative technology gives and optimal level of visibility, with razor-sharp laser line for up to 15m. At the press of a button, the straight line laser provides a perfect 90 angle. The FLS 90 has a dual purpose base with positioning claws that make placing the laser especially easy. On flat floors, the positioning claws can be faced upwards to lay flush against the floor. On tiles, the positioning claws can be faced downwards to grip onto the tile edge. Thanks to its innovative housing design, the laser can fit perfectly into the corner of a room, with lines running directly along the wall. Any irregularities in the squareness of the room are then immediately visible and can be taken into account during layout work. The FLS also has a circular vial that shows whether the laser is positioned horizontally. Specification 90 Angle Accuracy:± 0.3 mm/m.Working Range: 15m.Power: 3 x AA batteries (supplied).Average Battery Life: 20 Hours. Laser Class: 2.Protection Class: IP54 rated, against splash dust damage.

The Stabila BST-S 5/8in Thread Construction Tripod extends between 100-160cm in height. The aluminium construction is lightweight and durable and its spiked feet are stable on any terrain. The adjustable legs feature a rapid locking function and spread stopper. Also comes with a carrying strap for easy transportation. It accepts the Stabila laser level base plate.

The Stabila BST-K-M Mini Column Construction Tripod extends between 69 - 170cm in height. It has a compact design, that makes it easy to store and also enables working at lower heights than when working with traditional tripods.

The Stabila BST-K-L Column Construction Tripod extends between 98-220cm in height.

The Stabila NL Telescopic Levelling Rod is made from anodised aluminium. It is extendable up to 2.4m with a scale in mm graduations. The adjustment slide ensures optimal display clarity and trouble-free height definition. Suitable for all STABILA laser receivers and receiving units. How To Use: 1. Align the rods zero mark to the laser beam. 2. Move the receiver on the levelling rod to bring it back in line with the laser beams height at the new measurement point. 3. The height difference plus or minus can now be read from the NLs scale

The Roughneck P50 Laser Distance Measure has a compact design and a soft grip rubber case that prevents slipping during measurements. Made with Leica's M3i chipset to provide reliable, accurate measurements. It offers: automatic area, volume and Pythagoras calculations. Addition, subtraction and reference point selection (front/rear) are also added to ensure all on-site measuring tasks are accounted for quickly and accurately. The inverted display provides improved visibility in bright light. Specification: Range: 0.21-50m (8.1/4in - 165ft)Accuracy: 3mmSmallest Unit Displayed: 1mm (1/16in)Laser Class: Class 2 / 635nm <1mWAuto Laser Off: After 30 secondsAuto Power Off: After 120 secondsContinuous Measuring: YesOperating Temperature: 0 to 40CPower: 2 x AAA batteries (supplied)Weight (without batteries): 80.5g

The Roughneck P20 Laser Distance Measure has a compact design and a soft grip rubber case that prevents slipping during measurements. Made with Leica's M3i chipset to provide reliable, accurate measurements. Simple one button operation, measures distance in metric (mm/cm/m) or imperial (inches/feet). The inverted display provides improved visibility in bright light. Specification: Range: 0.21-20m (8.1/4in - 65ft)Accuracy: 3mmSmallest Unit Displayed: 1mm (1/16in)Laser Class: Class 2 / 635nm <1mWAuto Power Off: After 120 secondsContinuous Measuring: YesOperating Temperature: 0 to 40CPower: 2 x AAA batteries (supplied)Weight (without batteries): 80.5g

The Ridgid CL-100 Micro Self-Levelling Cross Line Laser has a 360 swivel base and provides instant projection of super-bright vertical and horizontal lines. Its outer casing is IP54 rated, meaning it is protected against splash and dust damage. Uses single knob operation, making it very easy to use and allowing rapid levelling and alignment. Supplied with: 1 x Elevating Tripod, 1 x Laser Enhancing Glasses and 1 x Plastic Carrying Case. Specification Level Accuracy: 2mm @10m.Self-Levelling Range:±6.Working Range: 30m.Power: 3 x AA batteries 1.5V (supplied).Tripod Thread: 1/4in.Laser: Class 2.Weight: 0.50kg.

The RIDGID Micro LM-400 Advanced Laser Distance Measure features Bluetooth technology, allowing it to be connected to smartphones and tablets to easily view, store and share data. This helps to avoid time-consuming paperwork and costly writing errors. Android and iOS Apps easily and quickly transfer and overlay measurements from the Micro LM-400 onto a photo or sketch. The LM-400 has an easy-to-read backlit 4-line display. It has a long measuring range of up to 7m and can measure angles of up to 65. Its inclination sensor can provide instant simultaneous horizontal, vertical and diagonal distance measurements. Functions: Distance, Volume and area calculation, Addition and subtraction, Continuous measurement, Stake out, Self-triggering timer, Indirect measurements, Angle measurements, Bluetooth connection, Transfer/overlay data to sketches and RIDGIDSketch App for iOS and Android. Specification: Accuracy:1.5mm.Operating Range: 70m.Power: 2 x AAA batteries (supplied).Protection Class: IP54 (dust water splash).

The Ridgid Micro LM-100 Laser Distance Measure provides simple, quick and accurate distance readings with its ultra-sharp Class II lasers. Distance reading will appear on the easy to read LCD display. The measure enables professional tradesman to quickly determine run distances for bidding, calculate the distance of piping runs, measure trouble spots down the line and quickly determine spacing for code compliance. Measures feet, inches and metres. Stores up to 20 measurements. Bright Backlit Display allows use in poorly lit areas. Rugged over-moulding allows excellent grip. Measurement calculations: area, volume, and indirect measurement calculations. Specification: Accuracy:1.5mm.Operating Range: 50m.Power: 2 x AAA batteries (supplied).Protection Class: IP54 (dust water splash).

The STANLEY Pocket TLM 30 Laser Measure enables you to capture measurements on the go. The pocket size is easy to carry and ideal for most interior measurements. It has an overmould grip handle for comfort and extra control. Specification: Accuracy:0.6mm/mOperating Range: 9mPower: Built-in 3.7V Lithium-ion Battery

The Stanley Intelli Tools 360 Cross Green Line Laser Level projects a 360 horizontal line and 100 vertical line. Ideal for use in a wide variety of jobs, including woodworking, drywall installation, framing and roofing. The body is fitted with overmould housing for protection against knocks. Easy-to-use, fitted with a touch pad control panel and a 3-position lock switch with manual mode. It is IP50 rated, making it ideal for indoor DIY and residential construction jobs. Supplied with: 4 x AA alkaline batteries, 1 x QuickLink™ Bracket and 1 x Storage Pouch. Specification: Level Accuracy:0.4mm/mWorking Range: 25mPower: 4 x AA batteries (supplied)Thread: 1/4in

The Stanley Intelli Tools Cross90™ Green Beam Laser is self-levelling and projects a 100 vertical beam, horizontal beam and an additional 90 vertical beam. The 90 beam is ideal for tile or flooring installation or to lay out partition walls with ease. The green beams allow for enhanced visibility while working. The body is fitted with overmould housing and rubber bumpers on all corners for protection against knocks. Easy-to-use, fitted with a touch pad control panel and a 3-position lock switch with manual mode. It is IP50 rated, making it ideal for indoor DIY and residential construction jobs. Supplied with: 2 x AA alkaline batteries, 1 x QuickLink™ Bracket and 1 x Storage Pouch. Specification: Level Accuracy:0.5mm/mWorking Range: 16mPower: 2 x AA batteries (supplied)Thread: 1/4inWeight: 0.6kg

The Stanley Intelli Tools 360 Cross Red Line Laser Level projects a 360 horizontal line and 100 vertical line. Ideal for use in a wide variety of jobs, including woodworking, drywall installation, framing and roofing. The body is fitted with overmould housing for protection against knocks. Easy-to-use, fitted with a touch pad control panel and a 3-position lock switch with manual mode. It is IP50 rated, making it ideal for indoor DIY and residential construction jobs. Supplied with: 4 x AA alkaline batteries, 1 x QuickLink™ Bracket and 1 x Storage Pouch. Specification: Level Accuracy:0.4mm/mWorking Range: 20mPower: 4 x AA batteries (supplied)Thread: 1/4in

The Stanley Intelli Tools Cross90™ Red Beam Laser is self-levelling and projects a 100 vertical beam, horizontal beam and an additional 90 vertical beam. The 90 beam is ideal for tile or flooring installation or to lay out partition walls with ease. The body is fitted with overmould housing and rubber bumpers on all corners for protection against knocks. Easy-to-use, fitted with a touch pad control panel and a 3-position lock switch with manual mode. It is IP50 rated, making it ideal for indoor DIY and residential construction jobs. Supplied with: 2 x AA alkaline batteries, 1 x QuickLink™ Bracket and 1 x Storage Pouch. Specification: Level Accuracy:0.5mm/mWorking Range: 12mPower: 2 x AA batteries (supplied)Thread: 1/4inWeight: 0.6kg

The Stanley Intelli Tools Cubix™ Cross Line Laser Level is ideal for indoor use, DIY and light residential construction jobs, including levelling chair rails and hanging cabinets. By projecting bright green vertical and horizontal lines onto flat surfaces, users can easily level what they are installing. The Cubix™ is protected by a durable, overmoulded housing. It projects a green vertical line and horizontal line. Fitted with a touch pad control panel, locking pendulum and a 3 position lock switch with manual mode. Supplied with: 1 x Protective Pouch1 x Removable QuickLink™ Bracket2 x AA batteries1 x Quick Start Guide Specification: Level Accuracy:0.6mm/mWorking Range: 16mPower: 2 x AA batteries (supplied)Thread: 1/4in

The Stanley Intelli Tools Cubix™ Cross Line Laser Level is ideal for indoor use, DIY and light residential construction jobs, including levelling chair rails and hanging cabinets. By projecting bright red vertical and horizontal lines onto flat surfaces, users can easily level what they are installing. The Cubix™ is protected by a durable, overmoulded housing. It projects a red vertical line and horizontal line. Fitted with a touch pad control panel, locking pendulum and a 3 position lock switch with manual mode. Supplied with: 1 x Protective Pouch1 x Removable QuickLink™ Bracket2 x AA batteries1 x Quick Start Guide Specification: Level Accuracy:0.6mm/mWorking Range: 12mPower: 2 x AA batteries (supplied)Thread: 1/4in

The STANLEYTLM 50 Laser Measure can measure length with a single button, simple to use, both for taking simple measurements and for continuous measures. It has a compact, lightweight design with an ergonomic rubber casing. Its back lit display clearly shows measurements, even in dark areas. Also has an auto power off that saves battery power. Specification: Accuracy: 3mmOperating Range: 15mPower: 2 x AAA batteries (supplied)

The STANLEY Smart Measure Pro measures length, area and volume and features a calculator function for instant adding and subtracting of measurements. It has Bluetooth connectivity to sync directly to a phone, tablet or computer and to transfer files in jpeg and pdf format. After attaching the Smart Measure Pro to a smart phone and connecting them via the Smart Measure Pro App, the user simply takes a picture of the required surface area, and the intelligent digital device automatically calculates the materials required. An essential tool for urgent jobs, it is designed to provide immediate calculations of specific material requirements preset within the application. It is powered by an internal lithium-ion battery and is supplied with a standard USB cable for charging. Free app is available for both Android IOS. Specification: Accuracy:2mmOperating Range: 145mPower: Built-in Lithium-ion Battery

The Stanley X3R Multi Line Laser projects 3 x 360 lines (1 horizontal and 2 vertical). It has a robust, easy to use design that is IP54 rated, protected against splash and dust damage. Fitted with a locking pendulum which provides angled cross lines for custom layout and a large open window for back line beam. Its pulse mode allows use with a detector for increased range. Supplied with: 1 x Rechargeable Battery, 1 x Charger, 1 x Laser Target, 1 x Pair of Laser Glasses, 1 x Multifunction Bracket and 1 x Storage/Transportation Case. Specification Level Accuracy:± 0.3mm at 10mSelf-Levelling Range:±4Working Range: 20m (50m with detector)Power: 1 x Rechargeable BatteryLaser Class: 2Thread: 1/4in 5/8in

The Stanley Intellilevel Tilting Head Camera Tripod extends between 44 - 119cm in height. It is compact and stable with a tilting plate for wider versatility and integrated levelling.

The Stanley Intellilevel 58-MINI T Mini Tripod can be used with the following laser levels: CL2 , SP1 , SP2 and SP5.

The Stanley Intelli Tools 1-77-184 Floor to Ceiling Laser Pole is supplied as 4 detachable sections that screw together, one section is telescopic and is extendable up to 3.25m. Both end pieces feature detachable spring feet. The mounting bracket accepts both 1/4in and 5/8in thread lasers. Compatible with: CL-90.

The Stanley Intellilevel 5 Section Aluminium Grade Rod designed to provide height and distance readings used in conjunction with optical levels, rotating lasers and line lasers. It is extendable up to 5m, graduated in cm and mm. Made from strong, lightweight aluminium for durability.

The Stanley Intelli Tools Self-Levelling Wall Laser is specially designed for measuring and calculating. It projects horizontal and vertical lines, making it suitable for a variety of common projects. With automatic self-levelling, enabling automatic reference for angled lines. The laser has an inclination scale for setting angles and is supplied with a wall mount and attachments for hands-free convenience. Specification Level Accuracy:±3.0mm/m.Self-Levelling Range:±5.Working Range: 6m.Power: 3 x AA batteries (supplied).Laser Class: 2.Weight: 0.28kg.

The STANLEY TLM165SI FatMax Laser Measurer provides distance, area and volume calculations. It also provides indirect height measurements via Pythagoras calculation. Measurements can be taken from the front, back, tripod mount or end toe of the product. Fitted with a toe piece that allows measurement from the corner of the room. With integrated Bluetooth connectivity, enabling you to sync any data to your smart phone. Quickly capture measurements and create custom floor plans by connecting to the STANLEY Smart Connect™ App (download separately). Easy to operate thanks to the large colour touch screen. Other features include: addition/subtraction calculator, automatic sleep mode and a memory function. The tough and durable body is rated to IP54 to protect against dust and water spray. Fitted with a 1/4in thread for tripod mounting. Runs on 3 x AAA batteries (supplied). Specification: Accuracy:1.5mmOperating Range: 0.1-60mPower: 3 x AAA batteries (supplied)Automatic Off: 90/180 SecondsWeight: 100g

The STANLEY TLM 330 True Laser Measure allows for rapid and precise one person operation over long distances with easy to take measurements in busy or out-of-reach areas. It can measure length, area and volume up to 100m. Also has a Pythagoras function for remote measurement of high walls, Min./Max. tracking and trapezoid measurement for accurate layout. The back lit, 3 line display provides visibility in all working conditions and will store the last 20 measurements taken for reference. It also features a handy addition/subtraction calculator and a timer function with one person operation for greater productivity. The level ensures measurements are extremely accurate and it has a fitting for a camera tripod. Specification: Accuracy:1mmOperating Range: 0.5-100mPower: 2 x AAA batteries (supplied)Operating Temperature: -10-50C

The Stanley FatMax 77-123 CLLi Cross Line Laser Kit has a 25m range for use in an interior or exterior working environment. It projects 1 horizontal and 1 vertical line to create a cross line, making this ideal for quick layout jobs. It has an Out of True level sensor, magnetically damped pendulum and a pendulum lock for safe transportation. Supplied with a 2.7m Floor to Ceiling Pole Kit. Specification: Level Accuracy: 4mm @10mWorking Range: 25mPower: 3 x AA batteries (supplied)Laser Class: 1Thread: 1/4in

The STANLEYTLM 65 Laser Measure can measure length, area and volume up to 20m. With both metric and imperial readings. It is ideal for DIY use and can be used like a tape. With a compact design that is easy to store and simple to use. Specification: Accuracy:3mmOperating Range: 0.5-20mPower: 2 x AAA batteries (supplied)

The Stanley Intelli Tools C-Line Cross Line Laser Level projects bright red vertical and horizontal lines onto flat surfaces. Perfect for DIY and light residential construction jobs including levelling chair rails and hanging cabinets. Users can easily ensure that the item they are installing is level. Fitted with a 3-position pendulum lock (on/off/manual mode) for safe transportation. Rated to IP50 to protect against dust. Supplied with a magnetic L-Bracket. Specification: Level Accuracy: 6mm @10mWorking Range: 10mPower: 2 x AA batteries (supplied)Protection: IP50 RatedThread: 1/4in

The Stanley Intelli Tools IntelliMeasure Distance Estimator can measure length, area and volume. It has a large, easy-to-read LCD screen that shows either metric or imperial measurements. It can also display the last three measurements for quick reference. The intuitively designed toggle button lets you effortlessly switch between length, area and volume measuring modes. It will automatically calculates area and volume. There is also a manual addition mode for specialised calculations (i.e., perimeter). Specification: Accuracy:5mm.Operating Range: 12m (40ft).Power: 2 x AAA batteries (supplied).

The Einhell TE-LL 360 Cross Laser Level is an ideal aid for installation, renovation and laying jobs. The horizontal 360 laser line makes it easy to align objects to the same level in rooms. It projects a horizontal and a vertical laser line to make quick and easy work of measuring jobs. It also has a digital spirit level function. Fitted with a self-levelling function, the LED warns the user of tilt angles greater than 4 degrees. The self-levelling time is five seconds. The level features an integrated 1/4in thread for use on a tripod. It also has a soft grip body for comfortable and secure handling. For working comfort there is a height-adjustable wall bracket. Supplied with: 1 x Height Adjustable Wall Bracket 1 x Storage Bag. Specification Laser Class: 2, Level Accuracy:0.4 mm/mSelf-Levelling Range: 4Number of Beams: 2Working Range: 20mPower: 2 x AA batteries (not supplied)Weight: 0.27kg

The Einhell TC-LL 2 Cross Laser Level makes it easy to project a laser cross or a single laser onto walls, floors, ceilings or work pieces. Using the cross laser level you can align tiles, edgings, wallpaper and objects with meticulous accuracy. The universal clamp allows angular placement for positioning nails or drill-hole markers precisely. It also has a digital spirit level function. Fitted with a self-levelling function, the LED warns the user of tilt angles greater than 4. The level features an integrated 1/4in thread for use on a tripod. It also has a soft grip body for comfortable and secure handling. Supplied with: 1 x Universal Clamp 1 x Storage Bag. Specification Laser Class: 2, Level Accuracy:0.5 mm/m.Self-Levelling Range: 4.Number of Beams: 2.Working Range: 8M.Power: 2 x AA batteries (Not Included).Weight: 0.20kg.

The Einhell TC-LD 25 Laser Measuring Tool is a small and handy pocket-sized tool for measuring distance, area and volume. Variable settings allow measuring from either the front or rear edge of the tool and the Min./Max. function allows continuous measurements. The body is fitted with a soft grip, making it comfortable to handle. For safety the laser beam is only activated after the switching on operation is repeated. It switches off automatically after three minutes without being used. Ideal for measuring areas on building, restoration and renovation jobs, also for landscaping the garden or for the accurate measurement of work pieces in the home workshop. Supplied in a practical bag for storage. Specification: Accuracy:3mm.Operating Range: 0.5-25m.Power: 2 x AAA batteries (not supplied).

The DEWALT 100 Metre DW03101 Laser Distance Measure calculates area and volume with automatic calculations that make job estimates quick and easy. It has an additional triangular area function. The integrated inclinometer can be used as a digital level to calculate continuous height and indirect horizontal distances. Indirect height measurement uses Pythagoras to measure distances even when point A and/or point B isnt accessible for linear measurement. The laser distance measure has a large 3-line backlit display which helps to improve screen visibility in both dim and bright conditions. It features a memory unit that stores last 20 measurements. A multifunctional end piece folds at 90 degrees for edge measurements and extends 180 degrees for measurements from corners. Durable design with overmoulded housing, which has been 6 ft (2m) drop tested, and is IP65 water/debris resistant. Specification: Accuracy:1mm.Operating Range: 100m (330ft).Power: 2 x 1.5V LR03 (AAA); batteries (supplied).

DEWALT DW03050 50 Metre Laser Distance Measure 50M calculates area and volume with automatic calculations that make job estimates quick and easy. Indirect height measurement uses Pythagoras to measure distances even when point A and/or point B isnt accessible for linear measurement. The laser distance measure features a memory unit that stores the last 5 measurements, and a 2-Line backlit display helps improve screen visibility in both dim and bright conditions. It has a durable design with overmoulded housing, which has been 6 ft (2m) drop tested, and is IP65 water/debris resistant. Specification: Accuracy:1.5mm.Operating Range: 50m (165ft).Power: 2 x 1.5V LR03 (AAA) batteries (supplied).

The DEWALT DE0892G Green Beam Detector is very easy to use and offers a 50m working range. With selectable narrow and wide accuracy settings and a backlit LCD display. Magnets allow detector to be mounted on the metal tracks and there is a heavy-duty clamp for mounting on a grade rod. The detector will automatically shut off if it is inactive for 5 mins, prolonging battery life. Compatible with: DCE088D1G-QW/-GB/-XE DCE089D1G-QW/-GB/-XE. Supplied with: 1 x Heavy-Duty Detector Clamp 1 x 9 Volt Battery.

The DEWALT DE0892 Detector is very easy to use and offers a 50m working range. With selectable narrow and wide accuracy settings and a backlit LCD display. Magnets allow detector to be mounted on the metal tracks and there is a heavy-duty clamp for mounting on a grade rod. The detector will automatically shut off if it is inactive for 5 mins, prolonging battery life. Compatible with: DW088K DW089K line lasers. Supplied with: 1 x Heavy-Duty Detector Clamp 1 x 9 Volt Battery.

The DEWALT DE0882 1/4in Thread Floor to Ceiling Laser Pole is very easy to set up, with a reinforced fixing arm platform with locking mechanism and sections connecting material. Reaches a maximum height of 3.4m and a 360 horizontal rotation with no height change. Compatible with: DW087K, DW088K, DW089K, DW082K and DW084K.

The DEWALT DE0881T 1/4in Thread Mini Tripod extends between 60cm and 170cm in height and gives 360 horizontal rotation with no height change. Compatible with: DW087K, DW088K, DW089K, DW082K and DW084K.

The DEWALT DE0736 Construction Tripod has been designed to provide a heavy-duty platform for any line or spot laser, LDM and cameras with 5/8in mounting threads. An integrated vial on head enhances levelling accuracy. The easy to set up tripod has quick-release legs which have been constructed from lightweight aluminium alloy for job site durability. The pointed steel feet have been designed to be situated on any terrain, providing improved stability. Supplied with a 1/4in Thread Adaptor. Specification: Thread: 5/8in 1/4inHeight: 104-170cm

The DEWALT DE0735 Construction Tripod extends between 115 - 300cm in height. With industry standard 5/8in x 11 mounting threads and quick release legs for fast and easy setup. The telescopic head provides a 3m maximum reach. The aluminium alloy construction is lightweight and durable and the pointed steel feet are stable on any terrain with extra grip through rubber feet and legs chain.

The DEWALT DE0733 Elevated Tripod has been designed to provide a heavy-duty platform for any line or spot laser, LDM and cameras with 1/4in mounting threads. Constructed from lightweight aluminium alloy for job site durability. An integrated vial on the head enhances for levelling accuracy and quick setup. The head can tilt and adjust for quick and easy movement. This tripod has 2-stage telescopic legs and an elevating head with crank for quick and easy height adjustment. Each leg is fitted with a quick-release clamp. The rubber feet provide extra grip for stability on any terrain. Specification: Thread: 1/4inHeight: 97-248cm

The DEWALT DE0730G Green Laser Target Card has a magnetic base for attaching to ceiling grid or steel studs. For use in drop ceiling installation and steel stud layout. Helps to enhance laser beam visibility for easy location of the laser. For use with green beam lasers.

The DEWALT DE0714G Green Laser Glasses have been designed for use with green beam lasers. They are design specifically to enhance the green laser.