Size 600mm (24 in).Width 32mm.

Size 300mm (12 in).Width 28mm.

Size 150mm (6 in).Width 19mm.

This Faithfull high quality 30 metre dipping tape is ideal for accurately measuring tank contents. The carbon steel blade is marked with easy read graduations in millimetres and figured in centimetres on one side and feet and inches in 1⁄16 inch graduations on the other. The tape has a quick release swivel connector and is supplied complete with an approx. 278g graduated brass weight. The lightweight anodised aluminium frame is fitted with a metal easy wind handle and an offset ergonomic plastic back handle for user comfort. Not suitable for food use.

The Faithfull Fully Enclosed Fibreglass 30m / 100ft Long Tape features a 15mm wide blade clearly marked in both metric and imperial measurements. The fibreglass blade is resistant to stretching, impervious to moisture and resistant to scuffs and fitted with an ABS end loop. The large clear measurement increments are easy to read in most conditions and the tape is also easy to wipe clean after use. The tape is stored in a tough closed ABS, soft grip case, with a fold flat rewind handle and rotating winding knob with 3:1 gearing that allows the tape to be quickly rewound after use. Accuracy: EC Class III.

This Faithfull Aluminium Triangular Scale Rule is graduated with six different scales for precision drawing. (1:20, 1:25, 1:50, 1:75, 1:100, and 1:125). The graduations are clear and easy to read.The unique triangular profile keeps fingers well away from any knife edge when used for cutting or scoring card etc. Specification: Length: 300mm (12 in).

This Faithfull Prestige Tri-Scale Engineer Rule has the following specification: Length: 300mm (12in)Scales: 1:20, 1:25, 1:50, 1:75, 1:100, 1:125

This Faithfull Prestige Tri-Scale Architect Rule has the following specification: Length: 300mm (12in)Scales: 1:5, 1:10, 1:50, 1:100, 1:200, 1:500

Colour: White

Colour: Yellow

Size: 600mm x 25mm x 1.30mm

Size: 300mm x 25mm x 0.8mm

Length: 300mm (12 in).

Size: 150mm x 19mm x 0.6mm

Length: 1m (39 in)

This Bahco MTS Reversible Magnetic Tip Auto Pocket Tape has the following dimensions: Blade Length: 8m/26ftBlade Width: 25mm

This Bahco MTS Reversible Magnetic Tip Auto Pocket Tape has the following dimensions: Blade Length: 5m/16ftBlade Width: 25mm

The Bahco LTS-50-E Open Reel Fibreglass Tape has both metric and imperial graduations. Blade Length: 50m/165ft Blade Width: 13mmAccuracy: EC Class II

The Bahco LTS-30-E Open Reel Fibreglass Tape has both metric and imperial graduations. Blade Length: 30m/100ftBlade Width: 13mmAccuracy: EC Class II

The Bahco LTS-100-E Open Reel Fibreglass Tape has both metric and imperial graduations. Blade Length: 100m/330ftBlade Width: 13mmAccuracy: EC Class II

Size: 600mm (24in)

Size: 300mm (12in)

Size: 150mm (6in)

This BlueSpot Tools Broad Buddy Pocket Tape has the following dimensions: Blade Length: 10m/33ftBlade Width: 32mm

This BlueSpot Tools Broad Buddy Pocket Tape has the following dimensions: Blade Length: 8m/26ftBlade Width: 32mm

This BlueSpot Tools Easy Read Magnetic Pocket Tape has the following dimensions: Blade Length: 10m/33ftBlade Width: 23mm

This BlueSpot Tools Easy Read Magnetic Pocket Tape has the following dimensions: Blade Length: 7.5m/25ftBlade Width: 22mm

This BlueSpot Tools Easy Read Magnetic Pocket Tape has the following dimensions: Blade Length: 5m/16ftBlade Width: 17mm

1 x Advent Black Edition Tape 8m/26ft (Width 25mm)

1 x Advent Black Edition Tape 5m/16ft (Width 25mm)

Advent ASR 600 Precision Steel Rule has the following specification: Length: 600mm / 24in

Advent ASR 300 Precision Steel Rule has the following specification: Length: 300mm / 12in

Advent ASR 150 Precision Steel Rule has the following specification: Length: 150mm / 6in

Advent ASR 1000 Precision Steel Rule has the following specification: Length: 1000mm / 1m

The Advent Master Precision Tape features a 25mm wide blade with metric and imperial blade markings.Its ergonomically designed bevel case fits snugly into the palm of your hand. Intelligently manufactured to handle any job with ease. Accuracy: EC Class I

The Advent 2-In-1 Gap Tape is a unique product for normal and internal measurements. It has a double sided, non reflective steel blade with metric and imperial graduations. Contained with an ergonomically designed ABS case with a moulded rubber grip for increased comfort. With normal measurements on the top of the blade, the reserve blade markings take into account the tape case dimensions, so when you measure internal spaces you simply butt the case up to the end and read the measurement.

Advent Official Welsh Rugby Tape with logo on both sides. Metric and imperial graduations. Specification: Length: 5m/16ftWidth: 25mm

The Advent Vice Versa Dual Read Pocket Tape has a non-reflective steel blade with metric graduations on both sides of the tape and dual reading, meaning you can take a measurement from the left or right without the markings ever being upside down. Other features include a four rivet fastener, great standout and a multi-position hook. Regular measurements, long vertical or even long overhead measurements, this dual reading tape makes working on your own a simple task.

This Stanley FatMax Pro Pocket Tape has metric and imperial graduations. Blade Length: 5m/16ftBlade Width: 32mmAccuracy: EC Class II

This Stanley Tylon™ Pocket Tape has metric and imperial graduations, and is supplied Loose. Blade Length: 5m/16ftBlade Width: 19mmAccuracy: EC Class II

This Stanley Tylon™ Pocket Tape has metric and imperial graduations, and is supplied Loose. Blade Length: 8m/26ftBlade Width: 25mmAccuracy: Class II

This Stanley FatMax BladeArmor Tape has metric and imperial graduations. Blade Length: 8m/26ftBlade Width: 32mmAccuracy: EC Class II

This Stanley FatMax BladeArmor Tape has metric and imperial graduations. Blade Length: 5m/16ftBlade Width: 32mmAccuracy: EC Class II

This Stanley Tylon™ Pocket Tape has metric and imperial graduations, and is supplied Carded. Blade Length: 5m/16ftBlade Width: 19mmAccuracy: EC Class II

Size: 1000 x 30 x 1.05mm

This Trend FTS/S/R FAST TRACK Replacement Stone has the following specification: Grade: Extra Extra CoarseGrit: 100 (nom. 60 micron)Dimensions: 75 x 24 x 4mmColour: Grey

The Trend FTS/KIT/MK2B FAST TRACK™ MK2 Sharpener comes with: 1 x Base Carriage1 x Angled Roughing Stone 100G1 x Angled Preparation Stone 220G1 x Angled Finishing Stone 450G1 x Angled Fine Finishing Stone 600G1 x Angled Super Fine Finishing Stone 1000G1 x Centring Clip1 x Non-Slip Mat1 x Leather Strop1 x Fitted De-burring Plate1 x Tough Canvas Storage Case

The Trend FTS/KIT/MK2 FAST TRACK™ MK2 Sharpener is supplied with: 1 x Base Carriage1 x Angled Preparation Stone 220G1 x Angled Finishing Stone 450G1 x Centring Clip1 x Non-Slip Mat1 x Cleaning Block

The Trend Case for Fast Track Sharpener is a heavy-duty fabric which will hold the Trend Fast Track and accessory diamond stones. For use with FTS/KIT and FTS/KIT/MK2. It has pockets to accept three accessory stones, and a hook and loop flap to keep contents secure.It features a hanging loop/ carry strap and keeps the accessories, including cleaning block and non-slip mat, together with the sharpener. Specification: Size: 210 x 130 x 70mm.

Trend's Lapping Fluid is designed solely for use in the engineering industry and is suitable with all quality diamond abrasive products. Use this instead of water to reduce the threat of rusting by 95%. It reduces the possibility of clogging, excessive build-up of residue and improves diamond performance.It has penetrating qualities and oil/water solubility, which not only increases the cutting action but also assures superior lubrication of every diamond particle throughout the honing process. A synthetic based petroleum lubricant formulated to be used with diamond compounds.Specification: Size: 100ml.

The Stanley STA0-16-144 Hand held diamond sharpening stone is suitable for a range of general sharpening tasks including knives, chisels, scissors, shears etc. The two sided (coarse and fine grit) stone stores easily in the handle for convenience and its course and smooth grits make it the idea tool for precise sharpening.

Convenient three piece set consisting of sharpening stone , bottle of lubricating oil and a honing guide. Guides the user to achieve a precise sharp edge that is square to the blade. Angle setting gauge with pre-set markings of 25, 30 or 35.

The Roughneck Chisel Sharpening Kit is ideal for the sharpening of all wood chisels ranging between 6mm and 50mm. The honing oil is a mechanical oil that is petroleum based. There is a strong and solid sharpening guide with a screw for width adjustment. Full sharpening instructions and safety guidance are included on the packaging.

The IRWIN Marples 10507932 set of three sharpening tools. The pack contains a honing guide, combination sharpening stone and honing oil. Can be used on all brands and types of chisels.

The Marshalltown M16533 Round Rubbing Brick is ideal for dressing down and removing marks from concrete or cleaning brick. Fitted with a plastic handle. Specification Diameter: 150mm.Depth: 25mm.Grit: 20.

Type. MS44.Size. 115 x 45 x 13 x 5mm (4 1/2 x 1 3/4 x 1/2 x 3/16 in).Grade. Medium. With 1 Round Edge.

Type. MS24.Size. 115 x 45 x 6 x 1.5mm (4 1/2 x 1 /3/4 x 1/4 x 1/16 in)Grade. Medium. With 1 round edge.

Type. MS14.Size. 100 x 25 x 11 x 5mm (4 x 1 x 7/16 x 3/16 in).Grade. Medium. With 1 round edge.

Type. MF344.Size.4 X 1/2 in.Grade. Medium.

Type. MF34.Size. 100 x 10mm (4 x 3/8 in).Grade. Medium.

Type. MF244.Size. 100 x 12mm (4 X 1/2 in).Grade. Medium.

Type.MF214.Size. 100 x 6mm (4 x 1/4 in).Grade.Medium.

Type. MF144.Size. 100 x 12mm (4 x 1/2 in).Grade. Medium.

Type. MF14.Size.100 x 6mm (4 x 1/4 in).Grade. Medium.

Type. MF134.Size. 100 x 10mm (4 x 3/8 in).Grade. Medium.

Type. MF114.Size. 100 x 6mm (4 X 1/4 in).Grade. Medium.

These INDMB8 aluminium oxide bench stones have the same grit throughout, medium for sharpening dull tools Size.8 x 2 x 1 in.Grade. Medium.

Combination stones INDIB8 are made with one face coarse and one face of fine cut.Size. 204mm x 50mm x 25mm Fine/Coarse.

Designed specially for use by carpenters and mechanics. Ideal for sharpening dull tools. Provide a keen lasting edge. These stones may be used dry or with oil. The IB6 combination stone has one coarse and one fine face.

Combination stones INDIB24 are made with one face coarse or medium, and one face of fine cut.Size: 4 x 1 x .1/2in.Grade: Fine/Coarse.

Type. FS44.Size. 115 x 45 x 13 x 5mm (4 1/2 x 1 3/4 x 1/2 x 3/16 in)Grade. Fine. With 1 round edge.

Type. FS14.Size. 100 x 25 x 11 x 5mm (4 X 1x 7/16 x 3/16 in).Grade.Fine. With 1 round edge.

Type. FF34.Size. 100 x 10mm (4 x 3/8 in).Grade. Fine.

Type. FF244.Size. 100 x 12mm (4 X 1/2 in).Grade. Fine.

Type. FF214.Size. 100 x 6mm (4 x 1/4 in).Grade. Fine.

Type. FF144.Size. 100 x 12mm (4 x 1/2 in).Grade. Fine.

Type. FF14.Size. 100 x 6mm (4 X 1/4 in)Grade. Fine.

Type. FF114.Size. 100 x 6mm (4 x 1/4 in).Grade. Fine.

These iINDFB8 aluminium oxide stones have the same grit throughout.Size.8 x 2 x 1 in.Grade. Fine.

These INDCB8 aluminium oxide stones have the same grit throughout.Type.CB8Size.8 x 2 x 1 in.Grade.Coarse.

These INDCB24 Aluminium Oxide bench stones have the same grit throughout.Size: 4 x 1 x 1/2n.Grade: Coarse.

Round Tapered305mm (12 in)

Oval section305mm (12 in)

Flat Tapered260mm (10 1/2 in)

Plain rubbing bricks are ideal for dressing grinding wheels and for cleaning and scouring metal and alloy castings.Type: PlainSize: 200 x 50 x 50mm (8 x 2 x 2in)

Most commonly used to clean or dress floortiles and concrete floors.Type: FlutedSize: 200 x 50 x 50mm (8 x 2 x 2in)

To avoid workshop dust and unwanted oil deposits, this crafted beech oilstone box is designed to store any standard 200 x 50 x 25mm (8 x 2 x 1in) oilstone. Internal corners can be cut to suit other sizes.Internal size: 205x50x25mm.

This Faithfull 200mm Oilstone, complete with oil and Honing Guide Kit, makes the ideal kit for sharpening all HSS, carbon steel chisels and plane blades from 3 to 67mm wide.The honing guide makes it easy to restore a perfect cutting edge, even for newcomers to the task. Specifications: Size: 200 x 50 x 25mm (8 x 2 x 1in).Grit: Coarse 120, Medium 180.

Combination oilstone made from aluminium oxide with one medium face and one coarse face. Can be used either dry or with a light oil. Size: 200 x 50 x 25mm (8 x 2 x 1in) Grade: Medium / Coarse

Designed specially for use by carpenters and joiners. Combination oilstones are made from aluminium oxide. This is for use with oil when sharpening chisels and plane irons. Size: 100 x 25 x 12.5mm (4 x 1 x 1/2in)Grade: Fine / Coarse.

This Faithfull Honing Guide is used in conjunction with either an oil, water or diamond sharpening stone to ensure the perfect cutting angle when restoring a cutting edge to straight edged chisels, bevel edged chisels and plane irons from 3mm to 67mm wide.Use the inner jaws for chisels, a blade projection of 30mm will give a 30 degree angle and 40mm will result in a 25 degree angle. Use the outer jaws for plane irons with a projection of 38mm for a 30-degree angle or 50mm for a 25-degree angle.

The Faithfull Curved Diamond Whetstone is a uniquely shaped stone specially designed for the sharpening of wood turning tools and carving chisels. Its curved diamond surface lets you sharpen both concave and convex surfaces. The small end has a radius of approx. 3mm (1/8in) and tapers up to the large end with a radius of 28mm (1.1/8in). The double sided steel stone is coated with mono crystalline diamond in 600G medium and 1200G fine grits. The 600G grit is for sharpening blunt edges and the 1200G grit is for final honing of the edge. Can be used dry or with water as a lubricant, no oils are necessary. Specification: Size: 250 x 56 x 17mm

The Faithfull Diamond Whetstone Kit contains 3 stones for quick, easy and effortless sharpening of any blade. The 70 x 200mm metal stones are electroplated with monocrystalline diamond in three grits, 400G Coarse, 600G Medium and 1000G Fine. The ABS plastic base has non-slip pads for use on most surfaces, and each stone can be removed to be used separately. The benefit of these stones over a traditional abrasive sharpening stone is that the sharpening surface remains absolutely flat and will not groove over time. This is essential in order to provide consistent straight edges on precision cutting tools such as wood chisels and plane irons. Diamond stones will sharpen carbon steel, HSS and tungsten carbide tools and may also be used to abrade glass, ceramic tiles and porcelain. Ideal for general purpose sharpening of knives, scissors, chisels, plane blades, cutting blades, TCT router bits and any tool that requires a sharp edge. Can be used dry or with water as a lubricant, no oils are necessary. Blade Size: 70 x 200mmOverall Size: 232 x 225 x 40mm

The Faithfull Diamond stones will sharpen steel, HSS and tungsten carbide tools and may also be used to abrade glass, ceramic tiles and porcelain. Diamond stones may be used dry or with water as a lubricant. Always dry the stone after use and before storing. Clean the stone occasionally, using soapy water and a soft brush. A 4-sided diamond sharpening stone supplied with a worksafe surface gripping base for quick, easy and effortless sharpening of any blade.Grits: Fine (red) 600 grit, Medium (green) 400 grit, Coarse (yellow) 300 grit and Extra Coarse (blue) 200 grit.

Faithfull Replacement Diamond Whetstone for FAIDWKIT (Diamond Stone, Docking Station and storage wallet). The double-sided 8mm thick 70mm x 200mm metal stone is electroplated with monocrystalline diamond in two grits, 400G Coarse and 1000G Fine. Will sharpen carbon steel, HSS and tungsten carbide tools and may also be used to abrade glass, ceramic tiles and porcelain. Ideal for general purpose sharpening of knives, scissors, chisels, plane blades, cutting blades, TCT router bits and any tool that requires a sharp edge. Can be used dry or with water as a lubricant, no oils are necessary.

The Faithfull Diamond Sharpening Stone Kit is ideal for quick, easy and effortless sharpening of any blade and many other tools. The double sided 8mm thick metal stone is electroplated with monocrystalline diamond in two grits, 400G Coarse 1000G Fine, each can be easily accessed by simply releasing the stone from the docking station and turning it over.The benefit of this stone over a traditional abrasive sharpening stone is that the sharpening surface remains absolutely flat and will not groove over time. This is essential in order to provide consistent straight edged on precision cutting tools such as wood chisels and plane irons.Diamond stones will sharpen carbon steel, HSS and tungsten carbide tools and may also be used to abrade glass, ceramic tiles and porcelain and may be used dry or with water as a lubricant. Used for general purpose sharpening of knives, scissors, chisels, plane blades, cutting blades, TCT router bits and any tool that requires a sharp edge.The docking station is constructed using three solid, non-slip rubber pads and robust steel rods that are fitted with easy grip screw nuts for precise and firm fixing of the stone. The docking station is adjustable to accept stones from 135 to 216mm in length and has a 6mm deep recess to provide a secure and firm base for all sharpening operations.Supplied with a handy storage wallet.

The Faithfull Diamond Folding Whetstone is supplied in a handy storage case that unfolds to form a handle. The case protects the diamond stone and allows it to be kept in a pocket ready for use. Quickly restores a sharp edge to any blunt tool. The 400 and 600 grit surfaces are suitable for general purpose sharpening of knives, scissors, cutting blades, carbon steel, HSS and tungsten carbide tools, etc. Can be used dry or with water as a lubricant, no oils are necessary.

The Faithfull Curved Diamond Whetstone has a compact design and is ideal for use on flat and curved blades. It features two flat sides and two removable diamond rods. The two flat sides have 400G coarse and 600G medium grits and can be used on chisels, knives, scissors and many other cutting blades. The 600G 6mm and 12mm diameter diamond rods are ideal for honing concave wood carving chisels and moulding plane blades. The rods can be removed to be used individually or rotated in the holder to increase working life. Can be used dry or with water as a lubricant, no oils are necessary. Specification: Four Diamond Surfaces: 2 x Flat: 20 x 100mm 400G, 20 x 100mm 600G, 2 x Rods: 6 x 100mm 600G, 12 x 100mm 600GOverall Size: 103 x 40 x 12mm

The Red side is suitable for all woodworking tools, carbide tooling, router bits, 3D bits etc.The Blue side is suitable for all general carpentry, tin snips, wood flat bits, augers, garden edge tools etc. Blue: Coarse 325g, 45 micronRed: Fine 600g, 25 micron

Red: Fine 600g, 25 micron