Knipex 78 61 Series Electronic Super Knips for ultra fine cutting work, e. g. in electronics and fine mechanics. Also suitable for cutting fibre optic cable. With ground, very sharp cutting edges without bevel. The cutting edges have been additionally induction-hardened, cutting edge hardness approx. 62 HRC. Its precisely shaped tips cut wires close to a surface from 0.2mm. Made from special tool steel, oil hardened in multiple stages with a stainless steel rivet joint for extremely smooth movement for minimum operator fatigue. Controlled micro cutting edge misalignment allows for precise cutting of even the thinnest of wires and for a long service life. Fitted with ergonomic multi-component grips for added grip and comfort. Specification: Cutting Capacity (mm):Medium: 1.0, Soft: 0.2-1.6Length: 125mmJaw Length: 9mmHead Width: 13.5mm

These Knipex Electronic Super Knips have a lead catcher - no uncontrolled loss of cut wire ends. Specification: Cutting Capacity (mm): Medium: 1.0, Soft: 0.2-1.6Length: 125mmJaw Length: 9mmHead Width: 13.5mm

Knipex 78 03 Series Electronic Super Knips are fitted with electrically discharging handles (dissipative). Ground, very sharp cutting edges without bevel, cutting edge hardness approx. 54 HRC. The precisely shaped tips cut wires close to a surface from 0.2mm. Suitable for ultra fine cutting work, eg: in electronics and fine mechanics. Made from INOX tool steel with a stainless steel rivet joint for extremely smooth movement for minimum operator fatigue. Controlled micro cutting edge misalignment allows for precise cutting of even the thinnest of wires and for a long service life. Specification: Cutting Capacity (mm): Medium Hard: 1.0, Soft: 0.2-1.6Length: 125mmJaw Length: 9mmHead Width: 13.5mm

The Knipex 78 03 140 Electronic Super Knips are durable and stainless, made of INOX tool steel. With a cutting edge hardness of approx. 54 HRC. Specification: Length: 140mmCutting Capacity : Soft 0.2-2.1mm, Medium-Hard 1.2mmJaw Length: 12.3mmHead Width: 15.7mm

77 42 ESD: Pointed Non-Bevel Flush Cut Head, Medium: 0.80mm, Soft: 0.3-1.3mm.

Knipex 77 32 115 Electronic diagonal cutter with a pointed head and a small bevel, ideal for fine cutting work, in electronics and fine mechanics. Friction free box joint and return spring built into handle. The polish or mirror polish together with a fine film of oil offer effective rust protection - no circuit faults caused by peeling chrome from plated tools. 77 32 ESD: Pointed Bevel Head, Hard: 0.50mm, Medium: 1.0mm, Soft: 0.3-1.3mm.

Knipex Series 77 Electronic Diagonal Cutters with a round head, non-bevelled. Ideal for fine cutting work, e.g. in electronics and fine mechanics. Precision-ground cutting edges for flush cutting and low friction double spring for gentle smooth closing and opening. The cutting edges are separately induction hardened to approximately 62HRc. Made from ball bearing chrome steel, oil hardened with a polish/mirror polish finish, together with a fine film of oil to offer effective rust protection. No circuit faults caused by peeling chrome from plated tools. A stainless steel rivet joint provides extremely smooth movement for minimum operator fatigue. Fitted with ergonomic multi-component grips for added grip and comfort. Specification: Cutting Capacity (mm): Medium: 1.0, Soft: 0.2-1.3Length: 115mm

Knipex 77 12 Series Electronic Diagonal Cutters with a round head, bevel and lead catcher - no uncontrolled loss of cut wire ends. For fine cutting work, e.g. in electronics and fine mechanics. Made from ball bearing chrome steel, oil hardened. Additionally laser hardened, cutter hardness at least 60 HRC. With a polish/mirror polish finish, together with a fine film of oil to offer effective rust protection. No circuit faults caused by peeling chrome from plated tools. Fitted with ergonomic multi-component grips for added grip and comfort. Narrow sleeves pulled up to the head of the pliers enable the tool to be guided securely and comfortably, also between thumb and index finger. There is also a low-friction double spring for gentle and even opening. Specification: Cutting Capacity (mm): Hard: 0.6, Medium: 1.2, Soft: 0.2-1.6Length: 115mm

Knipex 77 02 115 ESD Electronic diagonal cutter with a round head and small bevel. Ideal for fine cutting work, in electronics and fine mechanics. Friction free box joint and return spring built into handle. The polish or mirror polish, together with a fine film of oil, offer effective rust protection - no circuit faults caused by peeling chrome from plated tools. ESD versions discharge the electrostatic energy correspondingly slowly and under control to protect endangered components. 77 02 ESD: Round Bevel Head, Hard: 0.60mm, Medium: 1.20mm, Soft: 0.3-1.6mm.

Knipex 75 02 Series Electronic Diagonal Cutters for ultra fine cutting work, e. g. in electronics and fine mechanics. With sharp, ground cutting edges. The cutting edges have been additionally induction-hardened, approx. 62 HRC. Made from high-grade special tool steel, forged, multi stage oil-hardened with a bolted joint for high precision and stress tolerance. There is also a low-friction double spring for gentle and even opening. Fitted with ergonomically PVC coated styled handles for added grip and comfort. Specification: Cutting Capacity (mm): Piano: 0.4, Hard: 0.6, Medium: 1.0, Soft: 0.2-1.3Length: 125mmJaw Length: 14mmHead Width: 10.5mm

74 91 Series High Leverage Centre Cutters with an integrated forged axle for heavy-duty use. Made from chrome vanadium heavy-duty steel, forged, multi stage oil-hardened. The precision cutting edges additionally induction-hardened (cutting edge hardness approx. 62 HRC), for all sorts of wire including piano wire. Fitted with ergonomically PVC coated styled handles for added grip and comfort. Cuts thick wires with less effort than other diagonal cutters of the same length. They offer high cutting performance with minimum effort due to optimum coordination of the cutting edge angle and transmission ratio. Specification: Length: 250mmCutting Capacity (mm): Piano: 3.5, Hard: 3.8, Medium: 5.0

These Knipex High Leverage Diagonal Cutters have an opening spring; to be activated if required. Specification: Length: 180mmCutting Capacity (mm): Piano: 2.2, Hard: 2.7, Medium: 3.8

1 x Knipex VDE High Leverage Diagonal Cutters 200mm Cutting Capacity: Medium: 4.2mm, Hard: 3.0mm, Piano: 2.5mm

1 x Knipex VDE High Leverage Diagonal Cutters 180mm Cutting Capacity: Medium: 3.8mm, Hard: 2.7mm, Piano: 2.2mm

1 x Knipex VDE High Leverage Diagonal Cutters 160mm Cutting Capacity: Medium: 3.4mm, Hard: 2.5mm, Piano: 2.0mm

These Knipex High Leverage Diagonal Cutters have the following specification: Length: 200mmCutting Capacity (mm): Piano: 2.2, Hard: 2.7, Medium: 3.8

These Knipex High Leverage Diagonal Cutters have the following specification: Length: 180mmCutting Capacity (mm): Piano: 2.2, Hard: 2.7, Medium: 3.8

These Knipex High Leverage Diagonal Cutters have the following specification: Length: 160mmCutting Capacity (mm): Piano: 2.0, Hard: 2.5, Medium: 3.4

These Knipex High Leverage Diagonal Cutters have the following specification: Length: 250mmCutting Capacity (mm): Piano: 3.0, Hard: 3.5, Medium: 4.6

These Knipex High Leverage Diagonal Cutters have the following specification: Length: 200mmCutting Capacity (mm): Piano: 2.5, Hard: 3.0, Medium: 4.2

These Knipex High Leverage Diagonal Cutters have the following specification: Length: 180mmCutting Capacity (mm): Piano: 2.2, Hard: 2.7, Medium: 3.8

These Knipex High Leverage Diagonal Cutters have the following specification: Length: 160mmCutting Capacity (mm): Piano: 2.0, Hard: 2.5, Medium: 3.4

Knipex 73 72 Series TwinForce Diagonal Cutters with patented double joint. Made from chrome vanadium electric steel, forged, multi stage oil-hardened. The cutting edges have been additionally induction-hardened, cutting edge hardness approx. 62 HRC. Reliably cuts all types of wire, including steel tape. Fitted with multi-component, soft grip handles that are lightweight and compact. It low cutting impact is gentle on hands, tension on muscles and tendons is relieved. Ideal for comfortable cutting, repetitive cutting or extremely hard cutting jobs. The design offers a highdegree of stability and zero-backlash due to precisely milled forged-in axles. Specification: Length: 180mmCutting Capacity (mm): Soft: 5.5, Medium Hard: 4.60, Hard: 3.20, Piano: 3.00

The Knipex 73 02 Series X-Cut Compact Diagonal Cutter requires 40% less force required compared with standard diagonal cutters of the same length. Made from chrome vanadium heavy-duty steel, forged, multi stage oil-hardened. Its box-joint design provides the highest stability whilst retaining low weight. Cuts finest strands as well as multi-core cables and piano wires. With a large opening width for thicker cables. Fitted with multi-component, soft grip handles that are lightweight and compact. They offer high cutting performance with minimum effort due to optimum coordination of the cutting edge angle and transmission ratio. Powerful, light and universal. Universally usable, in the assembly, maintenance and production. Specificiation: Length: 160mmCutting Capacity (mm): Soft Wire: 4.8, Medium Hard Wire: 3.8, Hard Wire: 2.7, Piano Wire: 2.2, Multi Stranded: 12

Knipex 72 01 Series Diagonal Cutters for nearly flush cutting of moulded plastic components from sprues.Made from vanadium electric steel, forged, oil-hardened. Fitted with ergonomically PVC coated styled handles for added grip and comfort. It has an improved transmission ratio for 25 % more cutting performance and fitted with an opening spring for ease of use. Cuts soft materials such as lead in a flush cut. Specification: Length: 160mmCutting Capacity: For soft materials only

The Knipex Concrete Mesh Cutters have blades made from chrome vanadium, forged, oil-hardened, heavy-duty steel and have robust cutting edges that are additionally induction hardened to approx. 62 HRC. The handles are constructed from powder-coated steel tube and fitted with sturdy non-slip two-colour dual component handle sleeves. The ergonomically angled handles minimise user effort and there is a forged-in stopper with comfortable shock-absorber for increased user comfort. The cutters offer a high cutting performance with minimum effort due to optimum co-ordination of the cutting edge angle and transmission ratio. Flat construction in the head and joint area provides increased access even in tight paces. An eccentric bolt provides precise adjustment of the cutter with 12 positions. A special, forged tool steel is used in the joints of the cutters and the bolted cutter head is replaceable. Specification Cutting Capacity: HRC 19: 11mm, HRC 40: 9mm and HRC 48: 6mm. Length: 950mm.Weight: 4.06kg.

The Knipex CoBolt compact bolt cutters give an exceptional cutting performance with minimum effort because of their effective lever action design. The lever action guarantees an extremely favourable lever ratio with low friction, and cutting performance is 30 times higher than the hand force applied (Requires 60% less effort). Cuts components like bolts, nails, rivets, etc. up to 6mm dia. The recess in the blade allows easier cutting of thicker wires, e. g. for anchor bolts in false ceilings. Specification: Length: 200mmCutting Capacity: Piano: 3.6mm, Hard: 4.0mm, Soft: 6.0mm

The Knipex 71 Series CoBolt Compact Bolt Cutters with 2 component, soft grip handles. Fitted with a return spring, these cutters have an exceptional cutting performance with minimum effort because of a very effective lever action design. The lever action guarantees an extremely favourable lever ratio with low friction, and cutting performance is 30 times higher than manual force due to special joint design. Cuts components like bolts, nails, rivets, etc. up to 6mm. 20 angled head with single-sided joint bar and diagonal cutting edge for flush cutting with space for gripping. Specifiation: Length: 200mmCutting Capacity: Piano: 3.6mm, Hard: 4.0mm, Soft: 6.0mm

This Knipex CoBolt Compact Bolt Cutter is fitted with ergonomic multi-component grips for added grip and comfort. Opening spring and locking device are integrated in the handles also for comfortable work and protected transport. Specification: Length: 200mmCutting Capacity: Soft Wire: 6.0mm, Medium-Hard Wire: 5.2mm, Hard Wire 4mm, Piano Wire: 3.6mm

This Knipex CoBolt Compact Bolt Cutter is fitted with ergonomic multi-component grips for added grip and comfort. Specification: Length: 200mmCutting Capacity: Soft Wire: 6.0mm, Medium-Hard Wire: 5.2mm, Hard Wire 4mm, Piano Wire: 3.6mm

This Knipex CoBolt Compact Bolt Cutter is fitted with ergonomically PVC coated styled handles for added grip and comfort. Specification: Length: 200mmCutting Capacity: Soft Wire: 6.0mm, Medium-Hard Wire: 5.2mm, Hard Wire 4mm, Piano Wire: 3.6mm

Knipex CoBolt S Compact Bolt Cutters are specially designed for small hands. Made from forged heavy-duty, chrome vanadium steel and oil-hardened multiple times. With precision cutting edges that have been induction hardened, approx. 64 HRC, ideal for cutting soft and hard wire as well as piano wire. Cuts components such as bolts, nails, rivets etc. up to 4.4mm. The efficient joint design ensures exceptional cutting performance with little effort. The microstructure on cutters keeps the material to be cut in a good insertion position for optimal use of the mechanics. There is also a gripping surface below the joint for gripping and pulling wires with a diameter from 1.0mm. Fitted with ergonomically PVC coated styled handles for added grip and comfort. Specification: Length: 160mmCutting Capacity : Soft Wire 5.3mm, Medium-Hard Wire 4.4mm, Hard Wire 3.2mm, Piano Wire 3mm

These Knipex VDE Diagonal Cutters have the following specification: Size: 180mmCutting Capacity: Hard: 2.5mm, Medium: 3.0mm, Soft: 4.0mm

These Knipex Diagonal Cutters have the following specification: Length: 180mmCutting Capacity (mm): Hard: 2.5, Medium: 3.0, Soft: 4.0

These Knipex Diagonal Cutters have the following specification: Length: 160mmCutting Capacity (mm):Hard: 1.8, Medium: 2.5, Soft: 4.0

These Knipex Diagonal Cutters have the following specification: Length: 140mmCutting Capacity (mm): Hard: 1.8, Medium: 2.5, Soft: 4.0

These Knipex Diagonal Cutters have the following specification: Length: 180mmCutting Capacity (mm): Hard: 2.5, Medium: 3.0, Soft: 4.0

These Knipex Diagonal Cutters have the following specification: Length: 160mmCutting Capacity (mm): Hard: 2.0, Medium: 2.8, Soft: 4.0

These Knipex Diagonal Cutters have the following specification: Length: 140mmCutting Capacity (mm): Hard: 1.8, Medium: 3.0, Soft: 4.0

These Knipex Diagonal Cutters have the following specification: Length: 125mmCutting Capacity (mm): Hard: 1.5, Medium: 2.3, Soft: 3.0

These Knipex End Cutting Nippers have the following specification: Length: 280mm (11in)Cutting Capacity: Hard: 3.2mm, Medium: 4.0mm, Soft: 4.5mm

These Knipex End Cutting Nippers are supplied LOOSE. Specification: Length: 200mmCutting Capacity: Hard: 2.8mm, Medium: 3.5mm, Soft: 4.0mm

These Knipex End Cutting Nippers have the following specification: Length: 200mm (8in)Cutting Capacity: Hard: 2.8mm, Medium: 3.5mm, Soft: 4.0mm

These Knipex End Cutting Nippers have the following specification: Length: 180mmCutting Capacity: Hard: 2.5mm, Medium: 3.2mm, Soft: 4.0mm

This Knipex High Leverage End Cutting Nippers have the following specification: Length: 200mmCutting Capacity : Soft 5mm, Medium-Hard 3.8mm, Hard 3mm, Piano Wire: 2.5mm

This Knipex High Leverage End Cutting Nippers have the following specification: Length: 160mmCutting Capacity : Soft 4.5mm, Medium-Hard 3.4mm, Hard 2.5mm, Piano Wire 2mm

This Knipex High Leverage End Cutting Nippers have the following specification: Length: 140mmCutting Capacity : Soft 4mm, Medium-Hard 3.1mm, Hard 2mm, Piano Wire 1.5mm

Length: 115mm.End oblique cutter, short head with small bevel 27 .

Length: 120mm.End diagonal cutter with small bevel - 15 .

The Knipex 61 01 200 have hardened blades, these are ideal for piano wire, for thick, and soft wire such as rivets, bolts with almost flush cutting of bolts, nails etc.These Knipex bolt end cutting nippers have high cutting capacity as result of optimal transmission of power applied.Cutting edges with additional inductive hardening and the edges have been hardened to approx. 64HRC. The Knipex KPX6101200 are made from the best sourced materials, vanadium electric steel that has been oil-hardened for added strength and durability. Length: 200mm (8 in)Polished headHandles PVC plastic coated.

Length 210mm (8 1/4 in).Shaft size: 40 -100 mm.

Length 165mm (6 1/2 in).Shaft size: 19 - 60 mm.

Length 130mm (5 1/4 in).Shaft size: 10 - 25 mm.

Length 130mm (5 1/4 in).Shaft size: 3 -10 mm.

Length 225mm (9 in).Shaft size: 40 - 100 mm.

Length 180mm (7 in).Shaft size: 19 - 60 mm.

Length: 140mm (5 1/2 in).Shaft size: 10 - 25 mm.

Length 140mm (5 1/2 in).Shaft size: 3 - 10 mm.

Length 210mm (8 1/4 in).Size of bore 40-100 mm.

Llength 165mm (6 1/2).Size of bore 19-60 mm.

Length 130mm (5 1/4 in).Size of bore 12-25 mm.

Length 130mm (5 1/4).Size of bore 8-13 mm.

Length 225mm (9 in).Bore size: 40 - 100 mm.

Length 180mm (7 in).Bore size: 19 - 60 mm.

Length 140mm (5 1/2 in).Bore size: 12 - 25 mm.

Length 140mm (5 1/2 in).Bore Size: 8 - 13 mm.

Size 310mmShaft size 85-140mm

Size 210mmShaft size 40-100mm

Size 185mmShaft size 19-60mm

Size 130mmShaft size 10-25mm

Size 130mmShaft size 3-10mm

Length 200 mm.Shaft size: 40 - 100 mm.

Length 170mm (6 3/4 in).Shaft size: 19 - 60mm.

Length 125mm (5 in)Shaft size 10 to 25mm.

Bore size: 40 - 100 mm.External Straight - length 210 mm.

Bore size: 19 - 60 mm. External Straight - length 180 mm.

Length 140mm (5 1/2)Shaft size 10 to 25 mm.

Shaft size: 3mm - 10mm

Size 310mmBore size 85-140mm

Size 225mmBore size 40-100mm

Size 180mmBore size 19-60mm

Size 140mmBore size 12-25mm

Size 140mm.Bore 8-13mm.

Length 215mm (8 1/2 in).Size of bore 40-100 mm.

Length 170mm ( 6 3/4 in).Size of bore 19-60 mm.

Length 130mm (5 1/4 in).Size of bore 12-25 mm.

Length 225mm (9 in).Bore size: 40 - 100 mm.

Length 180mm (7 in).Bore size: 19 - 60 mm.

Length 140mm (5.1/2 inches).Bore size: 12 - 25 mm.

Length: 140mm (5.½ inches).Bore size: 8mm - 13mm.

The Knipex 41 04 Series Universal Grip Pliers hold section and flat material securely. The Plier body is made from high strength spring steel, and inserted jaws are made of chrome vanadium steel, drop forged. Heavy-duty model with wire cutter. High clamping strength by elbow lever action. With adjustment screw and release lever, single hand operation. Length: 254mm (10in).Capacity: Hex: 30mm, Square: 20mm, Round: 40mm.

These Knipex Half-Round Mechanic's Pliers are manufactured from forged vanadium electric steel that has been oil-hardened. They have 45 angled, half-round, long jaws and a spark plug cover 'grabber'. They are fitted with non-slip plastic coated handles for comfort and safety. Perfect for gripping spark plugs and round components.

These Knipex Mechanics Bent Nose Pliers are manufactured from forged Vanadium Electric Steel that has been oil-hardened. They have a 70 angled head that offers easy access to confined areas, whilst the precision, high strength half round jaws feature cross hatched knurled surfaces for ultimate gripping. They are fitted with non-slip plastic coated handles for comfort and safety. Perfect for pulling split pins and other gripping tasks in difficult to access areas.

These Knipex 38 11 Mechanics Long Nose Pliers with straight, flat-round jaws and a polished head. Made from special tool steel that has been oil hardened to give these pliers a longer working life.; Fitted with; PVC dipped handles for added comfort, durability and, most importantly, added grip. The gripping surfaces cross-hatched and knurled. The cutting edges are separately induction hardened for durability and longer working life and are hardened to approx 61HRc. The pliers; can withstand high load capacity against torsion with high bending strength of the plier jaw/tips to withstand pulling and twisting. They are specially designed for the automotive industry as they have a long reach and will access tight or restricted areas.

These Knipex 35 32 Series precision electronics round nose pliers with ESD grip to discharge the electrostatic energy correspondingly slowly and under control to protect endangered components. For very fine installation work in electronics and fine mechanics used for gripping, folding and bending. Smooth ground gripping surfaces with carefully deburred edges. Low friction double spring for gentle smooth closing and opening. Mirror polish, together with a fine film of oil offer effective rust protection - no circuit faults caused by peeling chrome from plated tools. Length: 115mm.Pointed Round Jaws for bending wire eyes.

These Knipex Electronics Pliers have long, trapezoidal jaws.

Knipex 35 22 Series Electronics Half Round Pliers are fitted with electrically discharging handles (dissipative). The jaws feature smooth,ground gripping surfaces with carefully deburred edges. Low friction double spring for gentle smooth closing and opening.With a polish/mirror polish finish, together with a fine film of oil to offer effective rust protection. No circuit faults caused by peeling chrome from plated tools. Ideal for very fine installation work in electronics and fine mechanics used for gripping, folding and bending. Specification: Length: 115mm

These Knipex Electronics Pliers have half round jaws.

These Knipex Electronics Pliers have flat, wide jaws.

The Knipex Bent Long Reach Needle Nose Pliers are forged from special tool steel that has been oil-hardened and tempered. They are ideal for gripping, adjustment and assembly work in hard to reach areas thanks to slim half round tips and long handles. They provide careful yet reliable gripping, holding and guiding of small copper pipes, screws and cables as well as other round parts thanks to milled grooves with smooth surfaces. With a serrated pipe grip enabling them to securely grip round parts. Particularly suitable for work in the automotive trade and in mechanical engineering.