The Knipex Straight Long Reach Needle Nose Pliers are forged from special tool steel that has been oil-hardened and tempered. They are ideal for gripping, adjustment and assembly work in hard to reach areas thanks to slim half round tips and long handles. They provide careful yet reliable gripping, holding and guiding of small copper pipes, screws and cables as well as other round parts thanks to milled grooves with smooth surfaces. With a serrated pipe grip enabling them to securely grip round parts. Particularly suitable for work in the automotive trade and in mechanical engineering.

These Knipex 28 01 Series Assembly Pliers are made from special tool steel and have PVC dipped handles for added comfort, durability and, most importantly, added grip. The oil hardened and tempered construction will give these pliers a longer working life. They; have separately induction hardened cutting edges that are hardened to approximately 60HRc.; These pliers are specially suitable for gripping and assembly work with a higher prehensile power. They are equipped with hardened cutting edges with serrated gripping surfaces for hard or soft wire cutting.

These Knipex 26 26 Series Snipe Nose Side Cutting Pliers are fitted with multi-component grips, VDE tested up to 10,000V and safe for work up to 1,000V. They conform to DIN EN / IEC 60900. Made from vanadium electric steel, forged, multi stage oil-hardened. Chrome plated finish. The long half round jaws are distortion-tolerant and feature elastic precision tips and knurled gripping surfaces. The jaws are angled at 40 with cutting edges for medium hard and hard wire. The cutting edges are additionally induction hardened, cutting edge hardness approx. 61 HRC. Ideal for use on electronic or tight to reach areas on computers, circuitry, or motor vehicle applications. Specification Cutting Capacity: Hard Wire: 2.2mm, Medium Wire: 3.2mmLength: 200mm

The Knipex 26 22 200 bent long nose side cutters have Bi-material, 2-component handles for a more comfortable and positive grip. They have long flat round jaws that are highly loadable, with elastic precision points with blades for hard wire diameter up to 2.2mm and medium wire diameter up to 3.2 mm. The cutting edges are separately induction hardened for durabilty and longer working life and are hardend to approximately 61HRC. The jaws are angled at 40 and are ideal for use on electronic or tight to reach areas on computers, circuitry, or motor vehicles applications. Knipex have used a good quality special tool steel material that is oil hardened. Hard wire diameter: 2.2 mm.Medium wire diameter: 3.2 mm.Hardness approx. 61HRC.Length. 200 mm.

Length: 200mm (8 in).Hard wire diameter: 2.2 mm.Medium wire diameter: 3.2 mm.

The Knipex 26 16 Series Snipe Nose Side Cutting Pliers are fitted with multi-component grips, VDE tested up to 10,000V and safe for work up to 1,000V. They conform to DIN EN / IEC 60900. Made from vanadium electric steel, forged, multi stage oil-hardened. Chrome plated finish. The long half round jaws are distortion-tolerant and feature elastic precision tips and knurled gripping surfaces. With cutting edges for medium hard and hard wire. The cutting edges are additionally induction hardened, cutting edge hardness approx. 61 HRC. Ideal for all electrical instillation applications. Specification Cutting Capacity: Hard Wire: 2.2mm, Medium Wire: 3.2mmLength: 200mm

These Knipex Long Snipe Nose Side Cutting Pliers are fitted with PVC grips.

These Knipex Snipe Nose Side Cutting Pliers (Radio) are fitted with multi-component grips.

These Knipex Snipe Nose Side Cutting Pliers (Radio) are fitted with PVC grips.

1 x Knipex ErgoStrip Universal Stripping Tool - Left Handed

1 x Knipex ErgoStrip Universal Stripping Tool - Right Handed

The Knipex 14 26 Series VDE Side Cutters/Wire Strippers are fitted with multi-component grips, VDE tested up to 10,000V and safe for work up to 1,000V. They conform to DIN EN / IEC 60900. Made from top quality Vanadium electric special tool steel and have been forged and oil hardened. Chrome plated finish. They have flat round jaws for gripping surfaces and, with the serrated edge, will give a better grip on the workpiece. The cutting edges will give the user a good clean cut. These Knipex pliers have precision stripping holes for single (solid) conductors of 1.5 and 2.5 mm and are suitable for gripping and cutting work in precision mechanics. The heavy-duty induction hardened precision blades are ideal for soft wire up to 4.0mm diameter and are hardened to approximately 60 HRC. The cutting edges are suitable for cutting medium hard wire with a diameter of up to 4.0mm and single (solid) conductors of 1.5 and 2.5 mm with ease. Specification Cutting Capacity (mm): Medium: 1.5, Soft: 2.5Stripping Capacities: 1.5 2.5mmAWG: 1513Length: 160mm

1 x Knipex VDE Multifunctional Installation Pliers 200mm

The Knipex 13-6 Series StriX Insulation Stripper with multi-component grips, VDE tested up to 10,000V and safe for work up to 1,000V. They conform to DIN EN / IEC 60900. Made from high-grade tool steel that has been forged and oil-hardened, multiple times. Chrome plated finish. The knurled screw and lock nut provide easy adjustment to the required diameter of solid or stranded wire. Also fitted with a shear blade for cutting copper cable up to 15mm (5 x 2.5mm) and a bolted joint for precise operation with zero backlash. The pliers have a slim design for easy access. Ideal for single, multiple and fine stranded conductors with plastic or rubber insulation, max 5.0mm or resp. 10mm cable cross section. Increments in the jaw provide a visual orientation aid for stripping consistent lengths (11mm and 16mm). Specification Stripping Capacities: Diameter: 5mm/10mm, AWG: 7Length: 180mm

These Knipex 13 46 Series VDE Dismantling Pliers are fitted with multi-component grips, VDE tested up to 10,000V and safe for work up to 1,000V. They conform to DIN EN / IEC 60900. For stripping all types of round sheathed and damp-proof installation cables (e.g. NYM cable), without damage, thanks to circular cutting edge with depth limiter. The head is made from forged, vanadium electric steel, multi stage oil-hardened. Chrome plated finish. Cutting edges are additionally induction hardened to approx. 61 HRC for high wear resistance. The slim head design and optimally angled cable sheath cutter for simplified access especially into deep mounted junction boxes. It also features a side cutter for cutting and trimming conductors, wires, small screws and nails. They are 30% lighter than comparable pliers. Suitable for universal use: precision wire stripping holes for conductors from 1.5 and 2.5 mm Specification: Cable Stripping : 8-13mmStripping Capacity: 0.75 - 1.5/2.5mWire Capacity : Medium-Hard 3.2mm, Hard 2.2mmLength: 165mm

These Knipex 4 in 1 Electrician's Pliers are fitted with multi component grips.

These Knipex 4 in 1 Electricians Pliers are fitted with plastic coated handles plastic for comfort.

These Knipex Automatic Stripping Pliers are suitable for stripping a wide range of cables, wires, rubber leads such as H05 and highly flexible TPE-U-pipes. Adjusts automatically to the different cable diameters avoiding any damage to inner conductors or the shield braid. They have a smooth operating mechanism and a lightweight plastic, fibreglass-reinforced body. The blade is made from special tool steel, oil-hardened and is replaceable. Suitable for use with oil-resistant, halogen-free control and sensor/actuator cables with multicore cable design. Shielded and unshielded. Specification: Cable/Lead Diameter Range: 4.4-7.5mm

The Knipex 12 64 180 SB 64 Automatic Insulation Stripper for flat cable is suitable for stripping flat cable or PVC insulated flat cables up to a max. 12 mm width and 0.75 to 2.5 mm. It adapts automatically to the various conductor heights which prevents damage to the conductor. It has a smooth operating mechanism and a lightweight plastic, fibreglass-reinforced body. The blade is made from special tool steel which has been oil-hardened and is replaceable.

Knipex concentrate their knowledge and expertise on pliers, wrenches and cutters. This is the only way to justify there claim they are the best supplier in terms of quality, innovation and efficiency. Knipex products satisfy the highest expectations in terms of performance, ergonomics and service life. There products are designed to meet the requirements of professional users, who must be able to rely on their tools in day-to-day work. With over a thousand separate styles and sizes. Knipex offer a complete range of pliers for almost every application in trade and industry. These Knipex KPX1262180 are used for single, multiple and fine stranded cables of 0.2 up to 6.0 mm sq with standard insulation. Adjusts automatically to the respective cable cross-section which prevents damage to the conductor.The KPX1262180 wire cutter is suitable for copper and aluminium wire up to 2.5 mm sq and features an adjustable length stop from 6mm-18mm. The body is made from fibreglass reinforced plastic with ergonomic soft plastic gripping zone in the handle for added grip and comfort.

Knipex Self-Adjusting Insulation Stripper used for single, multiple and fine stranded conductors with plastic or rubber insulating. Adapts automatically to the respective cable cross-section, preventing damage to the conductor. The cutting depth can be adjusted for different insulation materials. Use the wire cutter for copper and aluminium wires, multiple stranded up to 10.0 mm and single stranded up to 6.0 mm. Features a smooth operating mechanism, with stripping blades and clamping jaws that are easily replaceable. The body is made from reinforced plastic fibreglass so it is lightweight. The blade is made from special tool steel that is oil-hardened. For thin ribbon cables up to 13/32 inches width in a single pass. SpecificationSize: 200mm.Range of application: Conductors 0.00118 - 13/32 inches.Length stop: 3.0-18.0mm. Stripping capacities: 0.03-10.0 mm.Capacity AWG: 32 - 7.

The Knipex Electronic Wire Stripping Shears are ideal for cutting and stripping solid, multicore and finely stranded conductors with conductor cross-section up to 0.75mm. They are made from oil-hardened tool steel with a pointed head for accurate cutting of fine wire in confined places. The knurled screw and lock nut provide easy adjustment for the required wire diameter. They are also fitted with an opening spring. Specification: Stripping Capacities: Diameter: 0.03-1.0mm/0.01-0.75mmLength: 130mm

The Knipex 11 06 Series VDE Insulation Strippers are fitted with multi-component grips, VDE tested up to 10,000V and safe for work up to 1,000V. They conform to DIN EN / IEC 60900. Made from special tool steel, forged, oil-hardened. Chrome plated finish. Easy adjustment to the required diameter of solid or stranded wire with knurled screw and lock nut. For stripping single, multiple and fine stranded conductors with plastic or rubber insulation up to 5.0mm dia. or 10mm cable cross-section. Specification Stripping Capacity: Diameter: 5mm/10mmAWG: 7Length: 160mm

Knipex concentrate their knowledge and expertise on pliers, wrenches and cutters. This is the only way to justify there claim they are the best supplier in terms of quality, innovation and efficiency. Knipex products satisfy the highest expectations in terms of performance, ergonomics and service life. There products are designed to meet the requirements of professional users, who must be able to rely on their tools in day-to-day work. With over a thousand separate styles and sizes. Knipex offer a complete range of pliers for almost every application in trade and industry. The breadth and depth of their range ensures that the best tool can always be found for every application. Particular attention is paid to ergonomic criteria in the production of their pliers and cutters, above all in the form of effort-reducing constructions and a handle design which is ideally suited to the moving hand and ensures minimum fatigue and safe work. The Knipex KPX1102160 are made from special tool steel for strength and durability, this oil hardened wire stripper features a adjustable screw for setting the desired diameter. it cuts wire diameters up to a maximum of 5 mm or 10mm cable cross section. Comfort Grip Size: 160 mm.

KPX1101160 End Wire Stripping Pliers 160mm These Knipex strippers have a polished head with brass adjusting knob, with PVC dipped handles for added comfort and a better grip.

The Knipex Ear Clamp Pliers are for simple and reliable mounting of 1-ear and 2-ear clamps (Oetiker system or similar). The head is made from high-grade special tool steel, forged and oil-hardened. Black atramentized finish with polished tips. Durable and strong, the press points on the clamp are extremely tough. Fitted with dipped plastic coated handles. The slim head permits good accessibility in confined areas. Versatile use, ideal for clamps on CV boots, cooler and fuel lines, air pressure systems, compressors. Length: 220mm

The Knipex 08-26 Series Needle Nose Combination Pliers are fitted with multi-component grips, VDE tested up to 10,000V and safe for work up to 1,000V. They conform to DIN EN / IEC 60900. Made from high-grade tool steel that has been forged and oil-hardened, multiple times. Chrome plated finish. The jaw features gripping surfaces with a special convex contour on one side for secure gripping of flat parts. A milled groove in the gripping area permits small parts such as nails, pins and bolts to be held and pulled. With cutting edges for soft, medium-hard and hard wire. Fitted with a high leverage joint for easy cutting. Ideal for working in confined areas thanks to their slim head design and pointed jaws (anti-twist).

The Knipex 03 07 Series Traditional Combination Pliers with heavy-duty dipped handles, VDE tested up to 10,000V and safe for work up to 1,000V. They conform to DIN EN / IEC 60900. Made from a top quality special tool steel, forged and oil-hardened to approximately 60 HRC for added strength and durability. Chrome plated finish. It has longer cutting edges for thicker cables and gripping zones for flat and round materials. Specification Cutting Capacity: Hard: 2.5mm, Medium Hard: 3.8mm, Multi-Stranded: 13.0mm

Knipex VDE Combination Pliers 200mm Cutting Capacity: Hard: 2.5mm, Medium Hard: 3.8mm, Multi-Strand: 13.0mm

Knipex VDE Combination Pliers 180mm Cutting Capacity: Hard: 2.2mm, Medium Hard: 3.4mm, Multi-Strand: 12.0mm

Knipex VDE Combination Pliers 160mm Cutting Capacity: Hard: 2.0mm, Medium Hard: 3.1mm, Multi-Strand: 10.0mm

These Knipex Combination Pliers have the following specification: Length: 200mmCutting Capacity: Hard: 2.5mm, Medium Hard: 3.8mm, Multi-Strand: 13.0mm

These Knipex Combination Pliers; have the following specification: Length: 180mmCutting Capacity: Hard: 2.2mm, Medium Hard: 3.4mm, Multi-Strand: 12.0mm

These Knipex Combination Pliers have the following specification: Length: 160mmCutting Capacity: Hard: 2.0mm, Medium Hard: 3.1mm, Multi-Strand: 9.0mm

These Knipex Combination Pliers have the following specification: Length: 200mmCutting Capacity: Hard: 2.5mm, Medium Hard: 3.8mm, Multi-Strand: 13.0mm

These Knipex Combination Pliers; have the following specification: Length: 180mmCutting Capacity: Hard: 2.2mm, Medium Hard: 3.4mm, Multi-Strand: 12.0mm

These Knipex Combination Pliers have the following specification: Length: 160mmCutting Capacity: Hard: 2.0mm, Medium Hard: 3.1mm, Multi-Strand: 9.0mm

These Knipex VDE High Leverage Combination Pliers have the following specification: Size: 225mm.Cutting Capacity: Piano: 2.5mm, Hard: 3.0mm, Multi-Strand: 14.0mm.

These Knipex VDE High Leverage Combination Pliers have the following specification: Size: 200mm.Cutting Capacity: Piano: 2.2mm, Hard: 2.8mm, Multi-Strand: 13.0mm.

These Knipex VDE High Leverage Combination Pliers have the following specification: Length: 180mmCutting Capacity : Piano 2mm, Hard 2.5mm, Multi-Strand 11.5mm

These Knipex High Leverage Combination Pliers have the following specification: Length: 225mmCutting Capacity: Piano: 2.5mm, Hard: 3.0mm

These Knipex High Leverage Combination Pliers have the following specification: Length: 200mmCutting Capacity: Piano: 2.2mm, Hard: 2.8mm

These Knipex High Leverage Combination Pliers have the following specification: Length: 180mmCutting Capacity: Piano: 2.0mm, Hard: 2.5mm

These Knipex High Leverage Combination Pliers have the following specification: Length: 200mmCutting Capacity: Piano: 2.0mm, Hard: 2.5mm

These Knipex High Leverage Combination Pliers have the following specification: Length: 180mmCutting Capacity: Piano: 2.0mm, Hard: 2.5mm

The Knipex 2 Piece Cobra Pliers Plier Wrench Set, contains the following: 1 x 87 01 250 Cobra Water Pump Pliers for easier, safer work, with box joint. Press button action for fast and firm adjustment directly on the workpiece. No unintentional adjustment. One hand adjustment possible, gripping surfaces with special hardened teeth. Self locking on pipes and nuts, no slipping on the workpiece and low hand force required. The guard prevents operators fingers being pinched. Capacity: 46mm.Length: 250mm (10in). 1 x 86 03 180 Plier Wrench for damage free installation of plated fittings, for working directly on chrome. It has an adjustable tightening tool and is also excellent for gripping, holding, pressing and bending workpieces. They are made from forged chrome vanadium electric steel, that has been oil hardened. There is zero backlash jaw pressure that prevents damage to edges of sensitive components and a push button for adjustment on the workpiece. Parallel jaws give a more solid grip; its design allows flexible adjustment of all widths up to the specified maximum size. Capacity For Nuts: 35mm.Length: 180mm (7in).

The Knipex Set of 2 Alligator Water Pump Pliers contains: 1 x 88 01 180: Hex: 36mm, Pipe: 42mm.1 x 88 01 250: Hex: 46mm, Pipe: 50mm.

The Knipex Set of 2 Cobra Water Pump Pliers contains: 1 x 87 01 180 Cobra Water Pump Pliers PVC Grip 180mm. Length: 180mm (7in). Capacity: Pipes: 42mm, Nuts: 36mm.Adjustment Positions: 18. 1 x 87 01 250 Cobra Water Pump Pliers PVC Grip 250mm. Length: 250mm (10in).Capacity: Pipes: 50mm, Nuts: 46mm.Adjustment Positions: 25.

The Knipex 4 Piece 00 20 15 VDE Pliers Set contains a selection of the most popular VDE pliers. All pliers are fitted with multi-component grips, VDE tested up to 10,000V and safe for work up to 1,000V. They conform to DIN EN / IEC 60900. The slip guard prevents any spark over from the non-insulated head to the hand. The heads are chrome plated for durability. Supplied in a high-quality, shock-resistant plastic case. Contains the following: 1 x 03 06 180 VDE Combination Pliers 180mm; made from top-quality special tool steel, forged and oil-hardened to approximately 60 HRC for added strength and durability. It has longer cutting edges for thicker cables and gripping zones for flat and round materials. Cutting Capacity: Hard: 2.2mm, Medium Hard: 3.4mm, Multi-Strand: 12.0mm 1 x 26 16 200 VDE Snipe Nose Cutting Pliers 200mm; made from vanadium electric steel, forged, multi-stage oil-hardened. The long half-round jaws are distortion-tolerant and feature elastic precision tips and knurled gripping surfaces with cutting edges for medium hard and hard wire. The cutting edges are additionally induction hardened, cutting edge hardness approx. 61 HRC. Ideal for all electrical installation applications. Cutting Capacity: Hard: 2.2mm, Medium: 3.2mm 1 x 70 06 160 VDE Diagonal Cutter 160mm; with a narrow head style for use in confined areas. Forged, vanadium electric steel, multi-stage oil-hardened. Precision cutting edges for soft and hard wire, additionally, induction hardened, approx. 62 HRC. Precision cutting edges for soft and hard wire. Provides clean cutting of thin copper wires, also at the cutting-edge tips. Cutting Capacity: Hard: 2.0mm, Medium: 2.8mm, Soft: 4.0mm 1 x 11 06 160 VDE Insulation Strippers 160mm; made from special tool steel, forged, oil-hardened. Easy adjustment to the required diameter of solid or stranded wire with knurled screw and lock nut. For stripping single, multiple and fine stranded conductors with plastic or rubber insulation.

The Knipex Assembly Pack Plier Set features the most popular sizes with 2 component, soft-grip handles. Contains: 1 x 03 02 180 Combination Pliers with 2 component, soft-grip handles and longer cutting edges for thicker cables. Gripping zones for flat and round materials. Additionally hardened cutting surfaces. Cutting Capacity: Hard: 2.2mm, Medium Hard: 3.4mm, Multi-Strand: 12.0mm. 1 x 26 12 200 Snipe Nose Side Cutting Pliers with long flat round jaws. Highly loadable, elastic precision points with blades. Cutting edges separately induction hardened. Made from special tool steel, oil-hardened. 61HRC. Fitted with multi-component grips. Cutting Capacity: Hard: 2.2mm, Medium: 3.2mm. 1 x 70 02 160 Diagonal Cutting Pliers with 2 component, soft-grip handles. They are the essential cutting tool for versatile use with highly precise machined cutting edges for a long service life and clean cutting of hard wire. Edge hardness approximately 62 HRc. Cutting Capacity: Hard: 2.5mm, Medium: 3.0mm, Soft: 4.0mm.

The Knipex 00 20 10 Pliers Set contains KPX0201180 Combination plier: Ideal for soft, hard and even piano wire cutting with the strong durable edges, will make an easy and clean cut, with long lasting results even under the toughest conditions. KPX7401160 Diagonal cutting plier: Ideal for soft or hard wire ranging from 2.0mm up to 3.00mm across the range sizes, even piano wire cutting is a breeze to cut with the strong durable edges, makes an easy and clean cut, with long lasting results. KPX8701250 Cobra water pump pliers: Have automatic adjustment as these can be opened and adjusted directly at the work piece with one hand and then the cobra pliers close with a push of a button, this gives a good strong grip on any job application. Tool steel is oil hardened and tempered, with separately induction-hardened cutting edges. High leverage tools for heavy-duty use. Polished heads with plastic coated handles for added grip and comfort.

Knipex 00 20 09 V03 Alligator Water Pump Pliers Set of 3 Comes with 1 of each size: 180mm, 250mm and 300mm. 88 01 180: Hex: 36mm, Pipe: 42mm.88 01 250: Hex: 46mm, Pipe: 50mm.88 01 300: Hex: 60mm, Pipe: 70mm.

The Knipex 00 20 09 Pliers Set contains 3 of the most popular size pliers, which feature polished heads and non-slip handles. Contains; 1 x 03 02 180 Knipex Combination Plier with longer cutting edges for thicker cables and gripping zones for flat and round materials. Additionally hardened cutting surfaces.Cutting Capacity: Hard: 2.2mm, Medium Hard: 3.4mm, Multi-Strand: 12.0mm 1 x 70 02 160 Knipex Diagonal Cutter with highly precise machined cutting edges for a long service life and clean cutting of hard wire. Edge hardness approximately 62 HRc.Cutting Capacity: Hard: 2.0mm, Medium: 3.0mm, Soft: 4.0mm 1 x 87 01 250 Knipex Cobra Waterpump Plier, with box joint for easier, safer work. Press button action allows fast and firm adjustment directly on the workpiece. Self locking on pipes and nuts, no slipping on the workpiece and low handforce required. The guard prevents operators fingers being pinched.Pipe Capacities: Round: 50mm, Hex: 46mm

The Knipex 00 19 41 Tool Roll is suitable for telecommunications and electrical engineers. It is made of hard-wearing polyester fabric with a practical, adjustable quick release fastener. The pliers have chrome plated heads and two-colour dual component handles. The screwdrivers are VDE tested according to DIN EN/IEC 60900 1000V. Contains: 1 x 03 05 Combination Plier 160mm1 x 11 05 Insulation Wire Stripper 160mm1 x 25 05 Snipe Nose Side Cutting Pliers 160mm1 x 30 15 Long Nose Plier 160mm1 x 30 35 Round Nose Plier 160mm1 x 31 15 Needle Nose Plier 160mm1 x 67 05 High Leverage End Cutter 140mm1 x 70 05 Diagonal Cutter 140mm2 x 98 20 Flat VDE Screwdrivers: 2.5mm, 4.0mm1 x 98 24 Phillips Screwdriver PH1 Open dimensions (L x H): 450 x 290mm.

The ITL Insulated End Wire Strippers with injection moulded nylon 11 handles, which exceed the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40C to70C, making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on the tool and insulation, plus a 30 day no quibble money back guarantee. Size: 150mm (6in).

The Insulated Waterpump Pliers with a groove joint and handles made from injection moulded nylon 11, which exceeds the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40C to70C, making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on the tool and insulation, plus a 30 day no quibble money back guarantee. Capacity: 35-110mm.

The Insulated Cable Croppers for cutting aluminium and copper cables only. They have injection moulded nylon 11 handles, which exceed the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40C to70C, making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on the tool and insulation, plus a 30 day no quibble money back guarantee. Size: 200mm (8in).

ITL Insulated Diagonal Cutting Nippers with handles made from injection moulded nylon 11, which exceed the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40C to70C, making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on the tool and insulation, plus a 30 day no quibble money back guarantee. Size: 150mm (6in).

These ITL 150mm Insulated Bent Nose Pliers have a tapered and bent jaw for hard-to-reach places. They are fully insulated and exceed international standards, and have multi use with a cutter. They are manufactured from injection moulded nylon thermoplastic, and are 100% tested to IEC60900, Category C and ASTMF1505. They are designed to withstand extreme impact, abrasion and are flame retardant. ITL tools are 100% tested with 1000 volts for 3 minutes when submerged in water, and are Category C Impact Tested for operation within a greater temperature range -40F to158F, -40C to70C. Size 150mm.

International Insulated Snipe Nose Pliers. Size: 200mm (8in).

International Insulated Snipe Nose Pliers. Size: 150mm (6in).

International Insulated Combination Pliers. Size: 200mm (8in).

International Insulated Combination Pliers. Size: 150mm (6in).

The Irwin Vise-Grip Nail Puller has machined jaws for maximum gripping strength and moulded ProTouch™ grips for added comfort and less fatigue. It is TUV/GS certified for optimal safety and user confidence. Length: 200mm (8in).

These Irwin 20SR Offset Snips have the following specification: Cut Type: Straight/Right Curves.Length: 225mm (8.3/4in).Length of Cut: 33mm.Cutting Capacity: Cold Rolled Steel:; 18; Gauge; 1.02mm, Stainless Steel: 23; Gauge/0.58mm.

These Irwin 20SL Offset Snips have the following specification: Cut Type: Straight/Left Curves.Length: 225mm (8.3/4in).Length of Cut: 33mm.Cutting Capacity: Cold Rolled Steel:; 18; Gauge; 1.02mm, Stainless Steel: 23; Gauge/0.58mm.

Irwin Aviation Snips Utility Cut are designed for applications when a long cut in lightweight material is desired. The precision-formed blades that are cold formed meaning that the blades are stronger for an extended cutting life, requires less cutting force, and provides a longer cut per stroke. The optimised torsion spring gives a consistent and smooth operation with increased reliability and durability. The safety latch is comfortable to reach from handle position with an easy push-up and release and one-handed opening and closing. The high-strength alloy steel spines can sustain greater pressure for cutting tougher materials and give increased life. Whilst the compound cutting action, reduces force needed to cut and decreases hand fatigue. The solid over-moulded soft-grips give superior comfort and performance. Size: 290mm (11in).Cut Capacity: Sheet Metal: 1.19mm.

These Irwin Aviation Snips have the following specification: Cutting Type: Straight/Wide Curves.Length: 250mm (10in).Cutting Capacity: Sheet Metal: 1.19mm.

These Irwin Aviation Snips have the following specification: Cutting Type: Right.Length: 250mm (10in).Cutting Capacity: Sheet Metal: 1.19mm.

These Irwin Aviation Snips have the following specification: Cutting Type: Left.Length: 250mm (10in).Cutting Capacity: Sheet Metal: 1.19mm.

The IRWIN Gilbow G950 is a straight shear with no crank to the handle and slightly longer jaws. As with the entire Gilbow range, the blades are hardened and tempered ensuring a keen long lasting cutting edge. These Irwin Gilbow G950 12 inch straight cutting shears have no crank to the handle and accurately ground edges that ensure the material being cut does not slip out of the jaws and become damaged.The jaw faces are hollow ground to preserve the life of the cutting edge. Gilbow G950 are jointed with a nut and bolt design essential in ensuring the longest possible life of the joint, whilst keeping a good easy smooth cutting movement. Irwin Gilbow snips and shears have a great cutting capability which is much greater than the strength of the user and will provide a good, clean and easy cut edge to any workpiece.

1 x Gilbow G691 Right Hand Universal Tin Snips 350mm (14in)

1 x Gilbow G69 Right Hand Universal Tin Snips 280mm (11in)

The IRWIN Gilbow G67 is a left hand cranked shear suitable for straight cutting and off cutting in a clockwise direction. These Irwin Gilbow G67 11 inch left hand cutting snips have accurately ground edges that ensure the material being cut does not slip out of the jaws and become damaged. The hollow ground jaw faces provide a longer life to the cutting edge. Gilbow G67 tin snips are jointed with a nut and bolt design essential in ensuring the longest possible life of the joint, whilst keeping a good, easy, smooth cutting movement. Irwin Gilbow snips and shears have a great cutting capability which is much greater than the strength of the user and will provide a good, clean, easy cut edge to any workpiece.

The IRWIN Gilbow G56 is a straight blade cutting snip which has been designed for use on precious metals. The long handle/short blade ratio gives the user more control when cutting. Irwin Gilbow snips and shears have a great cutting capability which this is much greater than the strength of the user and will provide a good, clean, easy cut edge to any workpiece. The original Gilbow G56 jewellers tin snips were first designed many years ago, and have dominated the sheet metal cutting industry to such an extent that today, snips and shears are referred to as 'Gilbows'.

Length 200mm (8 in).

Length 300mm (12 in).

Length 250mm (10 in).

1 x Gilbow G245 Straight Tin Snips 200mm (8in)

1 x G245 Straight Tin Snips 350mm (14in)

1 x Gilbow G245 Straight Tin Snips 300mm (12in)

Length: 250mm (10in).

The IRWIN Gilbow G056 is a curved blade cutting snip which has been designed for use on precious metals. The long handle/short blade ratio gives the user more control when cutting. Irwin Gilbow snips and shears have a great cutting capability, much greater than the strength of the user, and will provide a good, clean, easy cut edge to any workpiece. The original Gilbow G056 jeweller's tin snips were first designed many years ago, and have dominated the sheet metal cutting industry to such an extent today, snips and shears are referred to as 'Gilbows'. Size. 180mm (7in).

These Facom Automatic Clamp Pliers are suitable for opening and closing automatic clamps. They provide a multi-directional grip for working in a vertical or horizontal position (right or left).

The Facom 980C Angled Blade Universal Shears have 2 opening positions, the blade opening from 29 to 36 mm, and the handle opening from 77 to 102 mm. The non-slip bi-material grips offer increased comfort, and the shears lock in the closed position for safety.They have a slightly serrated blade preventing any risk of slippage, and are ideal for everyday cutting applications: Cardboard, rubber, PVC, leather 5 mm thick, also thin sheet steel 0.5 mm thick, and aluminium sheet up to 1 mm thick. Applicable for electric cables up to 2.5 mm diameter, as well as hoses, tubes, insulating foam, etc.Specifications: Length: 200mm (8in).Weight: 200g.

The Facom 980 Universal Shears have 2 opening positions, the blade opening from 29 to 36 mm and the handle opening from 77 to 102 mm. Non-slip bi-material grips offer increased comfort and the shears lock in the closed position for safety. A slightly serrated blade prevents any risk of slippage. The shears will cut through cardboard, rubber, PVC and leather up to 5mm thick. Length: 200mm (8in).Capacity: Thin Sheet Metal: 0.5mm, Thick Sheet Metal: 1mm, Aluminium: 1mm, Electric Cables: 2.5mm.

The Facom Auto Lock Grip Pliers have a patented automatic closing mechanism that automatically adjusts the jaws to the work piece, regardless of it size, with the same pressure. This makes them ideal for saving time and for production work. The pliers are suitable for industrial and automotive production and maintenance applications. They are made from chrome-molybdenum steel, with treated jaws for a longer working life. They have a non-slip, chequered handle and allow one-handed unlocking by using the internal opening lever.These Facom Auto Lock Grip Pliers have the following specification: Length: 254mm (10in).Capacity: 38mm.

The Facom Quick Release Locking Pliers have an innovative release trigger situated on the lower grip of the pliers to simplify their use. This quickly releases the pliers smoothly and with virtually no effort. The 5-position, slotted opening system offers excellent time saving, easy adjustment and a high capacity. The pliers have forged and reinforced jaws that provide a powerful grip and a long lifetime. The machined grooves on the upper jaw are ideal for holding and tightening small diameter parts. Length: 254mm (10in).Capacity: Tubular Section: 100mm, Hex/Flat Section: 90mm.

The Facom Quick Release Locking Pliers have an innovative release trigger situated on the lower grip of the pliers to simplify their use. This quickly releases the pliers smoothly and with virtually no effort. The 5-position, slotted opening system offers excellent time saving, easy adjustment and a high capacity. The pliers have forged and reinforced jaws that provide a powerful grip and a long lifetime. The machined grooves on the upper jaw are ideal for holding and tightening small diameter parts. The 500A Short Nose Pliers have the following specifications:Capacity tubular section: 80mm.Capacity hex/flat section: 65mm.Length: 229mm (9in).

These Facom 449B Crimping Pliers have an integral wire cutter. They are suitable for crimping pre-insulated terminals: 1.5- 2.5-6 mm and crimping bare terminals 1.5-2.5-6 mm.They will strip wire 0.75 to 6 mm.Specifications: Weight: 260g.Length: 240mm.

This Facom 199A.18 Series Circlip Plier has textured, non-slip PVC grips, for reduced risk of the tool slipping from the hand during use, for increased comfort during intensive use, and for ease of cleaning.The narrow head and tips are for easy access, even where space is tight, while the piano wire tips are resistant to deformation and reinforced to reduce the risk of breakage.They are suitable for circlips 8 --> 200 mm. The Facom pliers have long 10 angled tips for optimum circlip holding.Specifications: Diameter: 1.8mm.Length: 170mm.Weight: 175g.

The Facom Double Jointed Extra Long Half-Round Nose Pliers provide maximum access and are ideal for use in difficult to reach spaces. They have a double lever and a slim profile, allowing work in awkward places, even single-handed. In addition, the tip is bent at 45 for better accessibility. The pliers have a serrated nose for excellent grip. Their handles are ergonomically designed for comfort. Length: 340mm.

1 x Facom 192A.18CPE High-Performance Diagonal Cutters 180mm

1 x Facom 192A.16CPE High-Performance Diagonal Cutters 160mm

This Facom Set of Pliers contains 2 Extra Long Reach Pliers which provide maximum access. They are ideal for use in difficult to reach spaces. Both pliers are 340mm long with slim profiles. They have a double lever effect, allowing single-handed working. Their ends are finely serrated and they have half-round noses.

The Facom 179A series circlip pliers have textured, non-slip PVC grips for reduced risk of the tool slipping from the hand during use, for increased comfort during intensive use and for ease of cleaning. The narrow head and tips allow easy access, even where space is tight. The piano wire tips are resistant to deformation and reinforced to reduce the risk of breakage. The extended tips, which are angled at 10 , offer better clip retention, reducing the risk of twisting or dropping circlips. The FCM179A23 has the following specifiations:Bore size: 2.3mm.Circlips diameter: 13-100mm.Length: 215mm.

These Faithfull Straight Tin Snips have the following specification: Length: 200mm (8in).Cutting Length: 42mm.Capacity: Copper (Soft): 0.70mm, Cold-Rolled Steel (Mild): 0.61mm, Hard Steel HRC35: 0.50mm and Stainless Steel 304: 0.41mm.

These Faithfull Straight Tin Snips have the following specification: Length: 300mm (12in).Cutting Length: 60mm.Capacity: Copper (Soft): 1.15mm, Cold-Rolled Steel (Mild): 0.91mm, Hard Steel HRC35: 0.70mm and Stainless Steel 304: 0.63mm.

These Faithfull Straight Tin Snips have the following specification: Length: 250mm (10in).Cutting Length: 52mm.Capacity: Copper (Soft): 0.94mm, Cold-Rolled Steel (Mild): 0.78mm, Hard Steel HRC35: 0.60mm and Stainless Steel 304: 0.45mm.

Faithfull Multipurpose Snips have stainless steel blades that are suitable for cutting low-density wire, thin metals and other light materials. Fitted with plastic, soft grip coated handles for user comfort and feature a notched wire cutter and lock. Ideal for general DIY use in workshops and gardens. Specification: Length: 200mm (8in)