This Expert Metric Short Arm Hexagon Key has the following dimensions: Size: 1.5mmArm Length: 47mmL Length: 16mmWeight: 1g

The Britool BRIE113854B Torx Key T40 has the following dimensions:Arm Length: 83mmL Length: 33mmWeight: 29g

The Expert By Facom E069253 Hexagon Key Set contains a selection of short arm hex keys finished in black phosphate. Comes in an economic retainer clip for easy storage and transport. Contains the following sizes: 1.5, 2, 2.5, 3, 4, 5, 5.5, 6, 8 10mm

The BlueSpot 15311 10 Piece Metric Hex Key Set features popular sizes of hex keys. Includes keyring for quick and convenient storage.Contains: 1.5, 2, 2.5, 3, 4, 5, 5.5, 6, 8 10mm.

The BlueSpot Jumbo Hex Keys are manufactured from heat treated steel with a blackened oxide coating to protect against corrosion. The precise and chamfered ends fit smoothly into fastener heads to reduce wear. The long arm hex keys allow for increased reach and torque and are ideal for use in automotive environments. The set is supplied in a carrier which holds each key securely in a marked slot for rapid identification. The outer plastic case has a handle for easy storage and transportation. Contains the following sizes: 8, 10, 12, 14, 17 19mm

The BlueSpot 15307 25 Piece Metric and Imperial Hex Key Wrench Set, with Pouch, is manufactured from hardened and tempered carbon steel for increased durability. The set includes a handy pouch for quick and convenient storage. Contents: Short series metric size: 1, 1.5, 2, 2.5, 3, 4, 4.5, 5, 5.5, 6, 7, 8 10mm. Long series imperial AF size: 3/64in, 1/16in, 5/64in, 3/32in, 7/64in, 1/8in, 9/64in, 5/32in, 3/16in, 7/32in, 1/4in 3/8in. 1 x Storage pouch.

The BlueSpot Tools Long Arm TORX Key Set has been manufactured from chrome vanadium steel for increased durability. The keys have a black oxide coating to aid corrosion resistance. The extra length enables a greater amount of torque to be applied to the fastener. The tips are chamfered to enable access from a wider angle. Sizes: TX10, TX15, TX20, TX25, TX27, TX30, TX40, TX45, TX50

The BlueSpot Tools Long Arm Hexagon Key Set has been manufactured from chrome vanadium steel for increased durability. The keys have a black oxide coating to aid corrosion resistance. The extra length enables a greater amount of torque to be applied to the fastener. The tips are chamfered to enable access from a wider angle. Sizes: 1.27, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 8, 10mm

The BlueSpot Tools Metric T-Handle Hex Key Set is manufactured from chrome vanadium steel and fitted with a heavy-duty ergonomic plastic grip. Keys are also double-sided with one long part and one short. The set comes complete with a rack which has 2 mounting holes so that it can be easily fixed to a bench or wall. It also helps keep the hex keys in size order as each key fits neatly into its own space on the rack. Sizes: 2, 2.5, 3, 4, 4.5, 5, 5.5, 6, 8, 10mm

Wera 967/9 TX BO 1 SB L-Key Set for TORX and TORX BO (with borehole) connections. BlackLaser surface treatment provides outstanding surface protection, even against corrosion for long service life. The ballpoint allows for offset working. Multicolour thermoplastic sleeves ensure the L-keys are easy-to-grip and identify. 'Take it Easy' tool finder system provides fast and easy selection of the required size, thanks to the instantly recognisable colour-coded system. Stored in a wear-resistant clip for enhanced durability and secure storage of the L-keys. Sizes: TX8 x 76mm, TX9 x 79mm, TX10 x 85mm, TX15 x 90mm, TX20 x 96mm, TX25 x 104mm, TX27 x 112mm, TX30 x 122mm and TX40 x 132mm.

Hexagon Key Ballpoint Metric set made from ultra tough bit grade steel and chrome plated. Hex-Plus - 20% more torque prevents rounding out of screw head. The shallow key design allows access in confined spaces and one ball end allows the key to be used at an angle from the screw head. 1-each of 1.5/90, 2/100, 2.5/112, 3/126, 4/140, 5/160, 6/180, 8/200, 10/219mm. Secure tool holding/easy access clip.

This Wera Hex Key Set has features that allow more torque to be delivered, dramatically reducing rounding out in the screw head and for more comfort during use. The keys are made from strong round bar and the plastic sleeves deliver more comfort. The multi-coloured sleeves allow quick and easy identification by size. Wera's patented Hex-Plus profile allows up to 20% more torque without damaging the fastener. Supplied in a button opening tool clip that holds the keys firmly, but allows easy tool selection. This 9 piece set contains the following sizes:1.5 x 90mm, 2.0 x 101mm, 2.5 x 112mm, 3.0 x 123mm, 4.0 x 137mm, 5.0 x 154mm, 6.0 x 172mm, 8.0 x 195mm, 10.0 x 224mm.

The Wera 967 SL/9 Holding Function L-Key Set with Torx profiles is uniquely designed to securely grip the fastener without the use of magnetism. In addition, the holding function (HF)* element securely holds screws, thanks to a clamping effect achieved by a flexible locking ball. The HF system is especially helpful in confined, hard-to-reach spaces where there is no room for a second hand to hold the screw. Made from round bar with machined ends for a precision fit and extra strength. The BlackLaser surface and high corrosion protection offer a long service life, with the round bar design adding further strength and robustness - particularly where the smaller sizes are concerned. Traditional hexagon socket screws can be easily rounded by the sharp edges of the tool pressing against the inside of the screw profile. The Hex-Plus profile offers greater surface contact in the head of the screw, reducing the notching effect to a minimum and deformation to the screw head is almost eliminated. The greater contact area also enables a greater torque transfer by up 20%. Wera's 'Take it Easy' tool finder system with colour coding according to size allows simple and rapid identification of the required tool. The thermoplastic sleeve ensures the correct size is easy to recognise and the L-keys are easy to grip and comfortable to use, even at low temperatures. The wear-resistant clip ensures secure storage of the L-keys as well as simple removal and access. Sizes: TX8 x 76mm, TX9 x 79mm, TX10 x 85mm, TX15 x 90mm, TX20 x 96mm, TX25 x 104mm, TX27 x 112mm, TX30 x 122mm and TX40 x 132mm.

Wera Hex-Plus Ball End Keys are made from stainless steel, this will prevent corrosion to stainless fasteners and components through cross contamination of metals. They are also ideal for all normal applications. They have undergone the Wera vacuum ice-hardening process, this gives the tool the required toughness and wear resistance for heavy-duty industrial applications. Hex-Plus profiles are machined for a precise fit and allow 20% more torque to be delivered, dramatically reducing rounding out in the screw heads. Made from round bar, the key diameters are bigger than conventional keys and are more comfortable during use. Developed to meet the needs from the ever increasing use of stainless steel in sport equipment, architecture, buildings, interior design and fittings as well as classic cars and motorbikes. Supplied in a wear-resistant clip case that holds the keys firmly, but allows easy tool selection. Sizes: 1.5, 2, 2.5, 3, 4, 5, 6, 8 and 10mm.

1 x Wera 3950 PKL Hex-Plus Stainless Steel L-Key 6.0mm

1 x Wera 3950 PKL Hex-Plus Stainless Steel L-Key 5.0mm

1 x Wera 3950 PKL Hex-Plus Stainless Steel L-Key 4.0mm

1 x Wera 3950 PKL Hex-Plus Stainless Steel L-Key 3.0mm

1 x Wera 3950 PKL Hex-Plus Stainless Steel L-Key 2.5mm

The Wera 950 SPKL/9 Hex-Plus Holding Function L-Key Set, the long arm of each hex-key features a ball-end design which allows off angle screws to be accessed which is particularly advantageous in confined spaces. In addition, the holding function (HF)* element securely holds screws, thanks to a clamping effect achieved by a flexible locking ball. The HF system is especially helpful in confined, hard-to-reach spaces where there is no room for a second hand to hold the screw. Traditional hexagon socket screws can be easily rounded by the sharp edges of the tool pressing against the inside of the screw profile. The Hex-Plus profile offers greater surface contact in the head of the screw, reducing the notching effect to a minimum and deformation to the screw head is almost eliminated. The greater contact area also enables a greater torque transfer by up 20%. The BlackLaser surface and high corrosion protection offer a long service life, with the round bar design adding further strength and robustness - particularly where the smaller sizes are concerned. Wera's 'Take it Easy' tool finder system with colour coding according to size, allows simple and rapid identification of the required tool. The thermoplastic sleeve ensures the correct size is easily recognised and the L-keys are easy to grip and comfortable to use, even at low temperatures. The wear-resistant clip ensures secure storage of the L-keys as well as simple removal and access. *(HF) holding function for hexagon socket screws, sizes: 1.5, 2.0 and 2.5 without holding function. Sizes: 1.5 x 90mm, 2.0 x 101mm, 2.5 x 112mm, 3.0 x 123mm, 4.0 x 137mm, 5.0 x 154mm, 6.0 x 172mm, 8.0 x 195mm, 10.0 x 224mm.

The TEN5105025 T Handle Hex Driver has the following specification:Size: 2.5mm.Short arm length: 12mm.Long arm length: 100mm.

The Facom 82H.JP9A 9 piece hexagon key set (metric) includes the following short arm hexagon keys: 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm and 10mm. The keys are ideal for driving bolts and screws that have hexagonal sockets. They are made from silicon alloy, providing strength and wear resistance. The keys are precisely heat treated to ensure that, if overloaded, they will fail by twisting rather than breaking. This guarantees user safety. The set is supplied in a compact sleeve-case with a hinged flap for instant selection of the required size. It allows easy storage, whilst keeping the keys together. The secure fastening mechanism allows easy removal of a single hex key without moving the others. Resistant to chemicals and general wear and tear. Performance: Conform to NF/ISO 2936 and DIN ISO 2936.

This Faithfull Long Arm Hex Key Set contains a selection of professional quality keys made from fully hardened chrome vanadium steel. All keys from 4mm have chamfered edges to prevent damage to blade and fittings. Long arm design allows access to deep set screws or difficult to reach places. Ball end keys allow angle entry to 25. Works in hard to reach areas. Faster insertion and removal. The handy storage caddy ensures that the key set can be safely stored in pockets and toolboxes. The key sizes are clearly shown on the caddy. Metric Sizes: 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10 mm.

This Faithfull Long Arm Hex Key Set contains a selection of professional quality keys made from fully hardened chrome vanadium steel. All keys from 4mm have chamfered edges to prevent damage to blade and fittings. Long arm design allows access to deep set screws or difficult to reach places. The handy storage caddy ensures that the key set can be safely stored in pockets and toolboxes. The key sizes are clearly shown on the caddy. Metric Sizes: 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10mm

This Faithfull Long Arm Hex Key Set contains a selection of professional quality keys made from fully hardened chrome vanadium steel. All keys from 4mm have chamfered edges to prevent damage to blade and fittings. Long arm design allows access to deep set screws or difficult to reach places. Ball end keys allow angle entry to 25. Works in hard to reach areas. Faster insertion and removal. Supplied in an ergonomic double layer, open out storage caddy which allows easy access to the smaller keys. Each key has a dedicated and clearly marked space for easy identification and is safely stored and ready for use. Metric Sizes: 1.3, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 8, 10mm

Size.5.0mm.

Size.4.0mm.

Size.2.5mm

The Faithfull FAIHK170MLA long arm hexagon key has the following specifications:Size: 17.0mm.Length: 250mm.Type: Long arm.

The Faithfull FAIHK15MLA long arm hexagon key has the following specifications:Size: 1.5mm.Length: 77mm.Type: Long arm.

Size.1/2in AF.

The Expert By Facom E113976 Hexagon Key Set contains a selection of long arm, ball end hex keys made from durable, zinc-plated chrome steel. Supplied in a folding storage case for easy transportation. Contains the following sizes: 1.5, 2, 2.5, 3, 4, 5, 6, 8 10mm.

The Bahco BE-9777B Hexagon Key Folding Set is compact and easy to store, so it can be carried in a pocket. A 2-component soft grip handle ensures user comfort. It's also resistant to impact, does not conduct heat or cold or rust. With a wide opening push button for automatic release of the blades. All the keys have a black oxide finish that provides outstanding surface protection and higher accuracy in the tip. Ideal for use in different working position, with a positive stop at 270 for maximum leverage. Size markings are printed on the hex key body for easy identification. Sizes: 2.5, 3, 4, 5, 6, 8,10mm

The Bahco BE-9770 Metric Long Ball End Hex L-Key Set is ideal for driving bolts and screws that have hexagonal sockets. Long arms ensure excellent leverage, which makes driving easier. The ball ends of the keys allow the keys to be used up to an angle of 30 to the socket, whilst the hexagonal ends ensure an excellent fit into the screw/bolt head. A phosphate finish surface treatment provides outstanding surface protection; higher accuracy in the tip. Supplied in a compact sleeve-case for instant selection of the required size. It allows easy storage, whilst keeping the keys together. Sizes: 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm and 10mm.

Marksman Rubber Mallet 8Oz

This Vitrex Non-Marking Rubber Mallet is ideal for setting large tiles into adhesive. It has a non-marking white rubber head and can be used in conjunction with the lash tile levelling system.Specification: Colour: White.Weight: 462g.

This Vaughan VW18 Framing Hammer has a smooth face to prevent marking when driving nails flush.

The Vaughan VW18 Framing Hammer has a milled face which grips the nail head for a more positive drive.

The Vaughan Welder's Chipping Hammer with a 30mm (1.1/4in) blade for removing flash and a tapered sharp point for chipping. Forged from high-carbon steel. Fitted with a exclusive air cushioned slip-resistant grip for comfort. Made in the USA. Specification Weight: 400g (14oz)Handle Length: 280mm (11in)

The Vaughan RS17ML Stealth Rip Hammer has a milled face.

The Vaughan RS17C Stealth Rip Hammer has a plain face.

The Vaughan Drilling Club hammer designed for striking star drills, cold chisels, brick bolsters, and punches. With rust-resistant blue finish and polished striking faces with generous bevels. Forged from high-carbon steel and with a patented Shock-Blok™ plug in its head, using hickory and rubber to absorb shock. Exclusive air cushioned slip-resistant grip for comfortable use. Made in the USA. Weight: 3 lb.Handle Length: 280mm (11in).

This Vaughan California Framing Hammer with polished California Framer style head and round neck and face. Forged from high-carbon steel and with patented Shock-Blok™ plug in its head, using hickory and rubber to absorb shock. An exclusive air cushioned, slip-resistant grip provides comfortable use. Made in the USA. Weight: 540g (19 oz.)Handle length: 405mm (16 inch)Face: Milled.

The Vaughan R999ML Ripping Hammer has the following specifications:Weight: 570g (20 oz.)Handle length: 355mm (14 inch)Face: Milled.

The Vaughan R999 Ripping Hammer has the following specifications: Weight: 570g (20 oz.)Handle length: 355mm (14 inch).Face: Plain.

The Vaughan R606M Ripping Hammer has the following specifications:Weight: 800g (28 oz.).Handle length: 405mm (16 inch).Face: Milled.

The Vaughan Steel Eagle Solid Hammer has the following specification: Weight: 680g (24oz).

The Vaughan R24 Curved Claw Nail Hammer has the following specifications: Weight: 680g (24 oz). Handle length: 355mm (14 inch).

The Vaughan 12750 Steel Eagle Solid Hammer has the following specification: Weight: 570g (20oz).

The Vaughan R20 Curved Claw Nail Hammer has the following specifications: Weight: 570g (20 oz). Handle length: 330mm (13 inch).

The VAUR16 Curved Claw Nail Hammer has the following specifications: Weight: 450g (16 oz). Handle length: 12 inch.

The Vaughan E18F Electricians Hammer has a fibreglass handle. Its head is fully polished and forged from high-carbon steel for excellent strength. It has a round extra-long pole, meaning it is ideal for reaching into electrical junction boxes. The Electricians Hammer has a patented hollow core in its fibreglass handle to absorb shock and provide superb balance. It has a steel wedged and epoxy-sealed eye and an exclusive air cushioned, slip-resistant grip. Weight: 510g (18oz).Handle length: 355mm (14in). Made in the USA.

The Dalluge Titanium Lite Hammer has a lightweight, precision cast, one-piece titanium head. It swings faster with less effort for increased nail driving power and a milled face which grips the nail head for a more positive drive. NaiLoc magnetic nail holder for maximum reach and one hand nail starting. With a 15in straight American hickory handle, that has been ergonomically designed, improving balance while reducing shock transfer. Size: 400g (14oz).

Dalluge Plain Face Trim Hammer with a curved handle, to improve balance whilst reducing shock transfer. Size: 450g (16oz).

Dalluge Trim Hammer Plain Face Straight Handle Size: 450g (16oz).

The Vaughan DDT16P Straight Claw Titanium Hammer has a plain face.

The Vaughan DDT16 Straight Claw Titanium Hammer has a milled face.

The VAUCF1HC California Framing Hammer has the following specifications: Face type: Milled.Handle type: Curved.

The Vaughan CF1 California Framing Hammer has the following specifications: Face type: Milled.Handle type: Straight.

The Vaughan Prospecting (Rock) Pick forged from solid high carbon steel for excellent strength. It has a flat, smooth striking face and a tapered, sharp point for chipping rock and masonry. For comfort, the pick has an exclusive air cushioned, slip-resistant grip. Made in the USA. Specifications: Weight: 620g (22oz)Handle length: 330mm (13in)

Size: 5.Diameter: 70 mm (2 3/4in).Weight: 3625g (7 1/2lb).

Size: 4.Diameter: 50mm (2in).Weight: 2100g (4 1/2lb).

Size: 3.Diameter: 44mm (1 3/4in).Weight: 1550g (3 1/4lb).

Size: 2.Diameter: 38mm (1 1/2in).Weight: 960g (2lb).

Size: 1.Diameter: 32mm (1 1/4in).Weight: 690g (1 1/2lb).

Size: 5.Diameter: 70mm (2 3/4 in).Weight: 3625g (7 1/2 lb).

Size: 4.Diameter: 50mm (2 in).Weight: 2100g (4 1/2 lb).

Size: 3.Diameter: 44mm (1 3/4 in).Weight: 1550g (3 1/4 lb).

Size: 2.Diameter: 38mm (1 1/2 in).Weight: 960g (2 lb).

Size: 1.Diameter: 32mm (1 1/4 in).Weight 690g (1 1/2 lb).

Diameter: 70mm (2 3/4 in).Weight: 3625g (7 1/2 lb).

Diameter: 50mm (2 in).Weight: 2100g (4 1/2 lb).

The Thor J612 has Aluminium-alloy head fitted with one hard black face, one soft red flat rubber push-on face and a fixed ash handle. These are specifically designed for use on woodwork, easing tight doors and windows, fitting trim, fitting chrome surrounds and light assembly work. Replacement faces are available: THO612HF (hard black) and THO612SF (soft red). Diameter: 40mm (1.1/2in).Weight: 320g (11oz).

The Thor A312 Aluminium hammers have a malleable iron head fitted with two cylindrical ductile aluminium faces (designed to wear and be replaced) and a wooden handle. Ideal for use where a heavy blow is required in a relatively small striking area. The malleable iron head and the aluminium faces combine to provide the weight for the blow while the faces prevent damage to most items being struck. Used as an alternative to copper as a general-purpose soft-faced hammer in engineering applications for assembly, repair and maintenance operations. Weight. 950gm (34oz).Diameter: 38 mm (1 1/2in).Size: 2.

Weight: 1450g (3.1/4lb).Diameter: 90mm (3.1/2in). White HeadNon Marking

Weight: 1200g (2 1/2lb).Diameter 90mm (3 1/2 in). Black Head

Weight: 725g (1 3/4lb).Diameter: 74mm (3 in). White Head

Weight: 525g (1lb 3oz)Diameter 64mm (2 1/2 in). White Head

Weight: 300g (10oz).Size: 54mm (2 1/8 in). White Head

Weight: 325g (11oz).Diameter 54mm (2 1/8 in) Black Head

For use with THOSPH275 Thor split head super plastic hammer. Face diameter: 70 mm (2 3/4in).

For use with size 4 Thor split head hammers .Face diameter 50m (2 in)

Size: 4.Weight 1900g (4 1/2lb).Diameter 50mm (2 in).

For use with size 3 Thor split head hammers .Face diameter 44m (1 3/4 in)

Size: 3.Weight 1300g (3lb).Diameter 44mm (1 3/4 in).

For use with size 2 Thor split head hammers .Face diameter 38mm (1.1/2 in)

Size: 2.Weight 790g (1 3/4lb).Diameter 38mm (1 1/2 in).

For use with size 1 Thor split head hammers .Face diameter 32m (1 1/4 in)

For use with size A Thor split head hammers .Face diameter 25mm (1 in)

Weight 950g (2lb).Diameter 80mm (3 1/4 in).

Weight 610g (1 1/2lb)Diameter 70mm (2 3/4 in).

Weight 480g (1lb).Diameter 60 mm (2 3/8 in).

Weight 325g (11oz)Diameter 50mm (2 in)

Weight 180g (6oz).Diameter 38mm (1 1/2 in).

Weight: 750g (1 3/4lb).Diameter: 67 mm (2 3/4in).

Weight: 525g (1 1/4lb).Diameter: 58 mm (2 1/4in).

Weight: 300g (11oz).Diameter: 50 mm (2in).

Size: A.Weight 340g (12oz).Diameter 25mm (1 in).

For use with Thor nylon hammers THO720 and THO2020. Diameter: 63 mm (2 1/2in).

1 x Thor 720N Nylon Hammer Wood Handle with Cast Iron Head Diameter: 63mm (2.1/2in)Weight: 2200g (5.1/2 lb)