This Gorilla Sledge Hammer has the following specification: Weight: 2.7kg (6 lb).Length: 780mm.

This Gorilla Mini Sledge Hammer has the following specification: Weight: 1.8kg (4 lb).Length: 345mm.

This Gorilla Mini Sledge Hammer has the following specification: Weight: 1.4kg (3 lb)Length: 345mm

1 x Roughneck Gorilla Club Hammer 1.8kg (4 lb)

1 x Roughneck Gorilla Club Hammer 1.4kg (3 lb)

Weight: 7260g (16 lb). Handle length 890mm - 915mm (35″ - 36″) depending on head weight.

Weight: 6.4kg (14 lb). Handle length 890mm - 915mm (35″ - 36″) depending on head weight.

Weight: 5440g (12 lb). Handle length 890mm - 915mm (35″ - 36″) depending on head weight.

Weight: 4530g (10 lb). Handle length 890mm - 915mm (35″ - 36″) depending on head weight.

Weight: 3620g (8 lb). Handle length 890mm - 915mm (35″ - 36″) depending on head weight.

Weight: 2710g (6 lb). Handle length 890mm - 915mm (35″ - 36″) depending on head weight.

Roughneck Mini Sledge Hammer with Fibreglass Handle. Handle Length: 16in Weight: 1.8kg (4 lb)

Roughneck Mini Sledge Hammer with Fibreglass Handle. Handle Length: 16inWeight: 1.4kg (3 lb)

Weight: 1810g (4 lb).

Weight: 1360g (3 lb).

Roughneck Slater's Hammer has a pointed pick at one end for making holes in slates and a claw in the centre of the head for pulling nails. On the opposing end is a rectangular striking head for tile fixing. The hammer head is constructed as a one piece with steel handle, and the hammer has a comfortable non-slip rubber grip. Weight: 454g (16oz).

Roughneck Double Ended Scutch Hammer which is ideal for all types of stone dressing. They are used for preparation of surface prior to rendering. The double ends make it ideal to have two sized scutch combs attached for different work surfaces. Unique treble injected TPR soft-grip handle for comfort during use and for reduced fatigue.

Roughneck Brick Hammer manufactured from drop forged alloy steel, hardened and tempered and with a fully polished head. The tubular steel handle has a strong head to shaft connection. The ergonomically designed grip is riveted to the handle for additional safety. Unique treble injected TPR soft grip handle for comfort during use and to reduce fatigue.

Weight: 1810g (4 lb).

Weight: 680g (1.1/2 lb).

Weight: 450g (1 lb).

The Roughneck 680g (24oz) rubber mallet has a medium hard rubber head, soft grip handle and a strong steel shaft, that is moulded together to make a one piece tool.

The Roughneck ROU61216 450g (16oz) rubber mallet has a mediumhard rubber head, soft grip handle and a strong steel shaft, this is allmoulded together to make a one piece tool.

The Roughneck VRS Claw Hammer can be used for general carpentry work and other home uses. The curved claws are ideal for prying, levering and nail pulling. VRS hammers have a high-quality satin finish and double injected soft grip handles for comfort. They feature a unique 2-piece 'vibration reduction system' for strength and durability. The patented 'VRS' technology reduces vibration transmitted to the hand, making it easier and safer to work with the hammer for long periods of time. Weight: 397g (14oz).

Weight: 570g (20oz).

Weight: 454g (16oz).

The Roughneck High Velocity Turbo Hammer has a one-piece forged handle construction offering maximum strength and safety. The hammer's special head design and triple injected air cushion grip reduce shock and the transmission of vibrations to the hand and provide a comfortable grip. The magnetic nail holder makes starting easy, especially in hard to reach places. The narrow long shank allows users to strike more accurately at an increased speed. This increased velocity results in higher striking forces at the point of impact and in turn, greater overall tool effectiveness.

Roughneck Claw Hammer is manufactured from drop-forged alloy steel hardened and tempered and with a fully polished head. The solid core fibreglass handle has a polypropylene jacket. Unique treble injected TPR ergonomically designed soft grip handle for comfort during use and reduced fatigue.Weight: 450g (1 lb).

Weight: 567g (20oz).

Weight: 450g (16oz).

The Olympia Rubber Mallet has a solid rubber head with a wooden 70mm shaft.This mallet is for general use where marking of surfaces is not critical.Solid rubber head and wooden shaft. Specifications:Size: 70mm. Weight: 907g (32 oz).

1 x Olympia Rubber Mallet 680g (24oz).

The Hultafors TB600 Bricklayer's Hammer has an ergonomic design that has been forged as one piece for increased durability with a vibration damping urethane plug. The steel shaft with I-beam provides increased durability. It is fitted with a tempered square striking face and a strong ground chisel with a notch for pulling out nails. The right angle and shape of chisel for safe splitting of bricks. The handle is fitted with a distinct end stop to ensure a secure grip and has a rubber cover to provide a comfortable grip.

Hultafors STFS50 Non-Rebound Hammer

Hultafors STFS40 Non-Rebound Hammer

Hultafors STFS30 Non-Rebound Hammer

1 x Hultafors T Block Ball Pein Hammer Large

1 x Hultafors T Block Ball Pein Hammer Medium

This Hultafors Electrician's Hammer is versatile with a U-shaped striking face ideal for working in confined spaces. The U-shape makes it possible to work close to ceilings, and corners without leaving marks on surrounding surfaces, while the straight claw makes it easy to get at, removing nails, and clamps in confined places. The ergonomically designed handle provides a good grip along the entire handle, regardless of power or precision. Weight: 550g.

1 x Hultafors Large T-Block Combi Deadblow Hammer 577g (1.2lb)

1 x Hultafors Medium T-Block Combi Deadblow Hammer 350g (0.7lb)

1 x Hultafors Small T-Block Combi Deadblow Hammer 238g (0.5lb)

Head Weight: 1.8kg (4 lb)

Head Weight: 1.13kg (2.1/2 lb)

Welding or chipping hammers are used to clean and remove slag from welds (dressing) and can also be used for boiler scaling applications. The Faithfull Welders Chipping Hammer has an all steel construction that makes it both solid and strong. It features a striking head with a sharp conical point and a flat chisel bevelled end. The unique helical barrel spring handle helps to prevent kickback and reduces resonance, helping to avoid fatigue during long periods of use. The hammer is fitted with an integral hanging hook for easy storage. Length: 290mm.

A pointed pick at one end for making holes in slates and a claw in the centre of the head for pulling nails. On the opposing end is a rectangular striking head. Tubular steel handle with a comfortable non-slip rubber grip.

The Faithfull Bricklayer's Single End Scutch Hammer has a hardened square striking face at one end with a single comb slot at the opposite end to fit replaceable one inch scutch combs or chisel bits (droves). Fitted with a traditional hickory handle. These specialist hammers are the most commonly used tools for dressing and cleaning bricks.

A Bricklayers Hammer with polished blade and hardened striking face specially designed for the cutting and dressing of all types of bricks and masonry.Fitted with a traditional hickory handle.Weight 830g (1.3/4 lb)

Colour : WhiteSize : 76 mm (3in).Weight : 794g (28oz).Face : 76 mm.

Colour : White.Size : 57mm (2.1/4in).Weight : 567g (20oz).Face : 57 mm.

Colour : Black.Size : 89 mm (3.1/2in).Weight : 1.1 kg (40oz).Face : 89 mm.

Colour : BlackSize : 76mm (3in).Weight : 794g (28oz).Face : 76 mm.

Colour : Black.Size : 57mm (2.1/4in).Weight : 567g (20oz).Face : 57 mm.

Colour : BlackSize : 63mm (2.1/2in).Weight : 680g (24oz).Face : 63 mm.

Weight: 570g (1 1/4 lb)

Weight: 450g (1lb).Curved Claw.

1 x Faithfull Nylon Hammer Replacement Face 38mm

1 x Faithfull Nylon Hammer 38mm (1.1/2in)

1 x Faithfull Nylon Hammer Replacement Face 32mm

1 x Faithfull Nylon Hammer 32mm (1.1/4in)

A traditional bricklayers tool with a double point. The hardened point is used for raking out weathered mortar joints and for digging out in clay, shale, sand or chalk, Fitted with a fibreglass handle which is lightweight, extremely strong and resistant to moisture. SAFETY TIPWear safety spectacles, or goggles, when hammering.Never use hammers to strike hardened metal.Strike squarely and avoid glancing blows.Never strike with the side of a hammer.Do not use a hammer with a loose or damaged head.Always use the correct hammer for the job.

A traditional bricklayers tool with a chisel and point. The hardened point is used for raking out weathered mortar joints and for digging out in clay, shale, sand or chalk, while the chisel end is used for dressing or removing redundant mortar from bricks. Fitted with a fibreglass handle which is lightweight, extremely strong and resistant to moisture. SAFETY TIPWear safety spectacles, or goggles, when hammering.Never use hammers to strike hardened metal.Strike squarely and avoid glancing blows.Never strike with the side of a hammer.Do not use a hammer with a loose or damaged head.Always use the correct hammer for the job.

The Faithfull bricklayers mortar pick available with double point.The point is used for clearing out old weathered mortar prior to re-pointing. Fitted with a hickory handle.

The Faithfull Bricklayer's Chisel and Point Mortar Pick. Its hardened point is used for raking out weathered mortar joints prior to repointing. The chisel end is used for dressing or removing mortar from bricks. Fitted with a hickory handle.

Head Weight: 227g (1/2 lb).

Weight: 450g (1 lb).

Head Weight: 340g (3/4 lb).

These wedges are designed for use in conjunction with the correct wooden handle when replacing damaged handles on hammers, axes and other striking tools. Includes malleable steel hammer wedges and wooden wedges and when fitted correctly, they provide a secure and safe attachment of a striking head to a wooden handle. Kit consists of 2 Steel Wedges : 12mm Width (Size 1)1 Wooden Wedge : 17 x 25mm Suitable for head weights 4oz to 1lb 2 Steel Wedges : 15mm Width (size 2)1 Wooden Wedge : 25 x 35mm Suitable for head weights 1lb to 2.5lbs 2 Steel Wedges : 18mm width (size 3)1 Wooden wedge : 30 x 30mm Suitable for head weights 3lb to 7lbs 2 steel wedges : 21mm width (size 4)1 wooden wedge : 30 x 40mm Suitable for head weights 10lb to 28lbs Note Hammer wedges are NOT suitable for use with fibreglass replacement handles.

The Faithfull Walling or Masons Hammer has one large striking face and the other end ground into a long tapered horizontal chisel end that is used for dressing stone. Fitted with a hickory handle.

Supplied in kits, these Faithfull Hammer Wedges are designed for use in conjunction with the correct wooden handle when replacing damaged handles on hammers, axes and other striking tools. Each kit includes two malleable steel hammer wedges and one wooden wedge. When fitted correctly they provide a secure and safe attachment of a striking head to a wooden handle. Please note: hammer wedges are NOT suitable for use with fibreglass replacement handles. The kit contains: 2 x Steel Wedges: 18mm width (size 3)1 x Wooden Wedge: 62 x 65 mm Suitable for axe heads of all weights.

The Faithfull Slater's Hammer is a pointed pick at one end for making holes in slates and a claw in the centre of the head for pulling nails. On the opposing end is a rectangular striking head.Fitted with a traditional hickory handle.

The Faithfull Boiler Scaling Hammer, specially designed for removing deposits and scale from metalwork. The head is ground to a chisel shape, one end vertical and the other horizontal to the handle. Fitted with a hickory handle. Weight: 450g (16oz)

Size: 3170g (7 lb)

Length: 900mm (36in)

Size: 760mm (30in)

Length: 600mm (24 in)

Weight: 6350g (14 lb).

Weight: 45430g (10 lb)

Replacement pin hammer handle in straight grained hickory to BS3823 with a waxed finish. Size: 330mm (13 in).

Replacement Warrington hammer handle in straight grained hickory to BS3823 with a waxed finish. Length: 300mm (12in).

This Faithfull geologist's hammer or geological pick is used for splitting and breaking rocks. In field geology, they are used to obtain a fresh surface of a rock in order to determine its composition, nature, mineralogy, history and field estimate of rock strength. In fossil collecting, they are employed to break rocks with the aim of revealing fossils inside. Used by geologists for taking samples in the field. This pick has one large square striking face and the other end is ground to a point for splitting, cracking and levering. Hickory handle.Weight: 620g (1 lb 6oz).

Length: 455mm (18 in).

Length: 405mm (16 in).

Length: 300mm (12 in).

Weight 1130g (2.1/2 lb)

The Faithfull replacement club hammer handle in straight grained hickory to BS3823 with a waxed finish.Length: 255mm (10 in).

Replacement brick hammer handle, in straight grained hickory to BS3823 with a waxed finish. Length: 255mm (10in).

Faithfull Replacement Adze Eye Claw Handle in straight grained hickory with a waxed finish. Made to BS 3823 BW/BR British Standard specification which governs density, moisture content, grain, twist, knotting, finish, staining etc.

Weight: 3170g (7 lb)

1 x Faithfull Club Hammer Long Shaft Fibreglass Handled 1.81kg (4 lb).

1 x Faithfull Club Hammer Fibreglass Handled 1.81kg (4 lb).

1 x Faithfull Club Hammer Fibreglass Handled 1.13kg (2.1/2 lb).

Weight: 4530g (10 lb)

The Faithfull Bricklayer's Double Ended Scutch Hammer specifically designed for dressing bricks and masonry. Fitted with a fibreglass handle which is lightweight, extremely strong and resistant to moisture.Also available are replaceable one inch scutch combs or chisel bits (droves).; SAFETY TIPWear safety spectacles, or goggles, when hammering.Never use hammers to strike hardened metal.Strike squarely and avoid glancing blows.Never strike with the side of a hammer.Do not use a hammer with a loose or damaged head.Remember that left for a long time in very dry conditions, wood can dry out. Always check to ensure that this has not happened to your handle.Always use the correct hammer for the job.

Faithfull Double Ended Scutch Hammer specifically designed for dressing bricks and masonry. Fitted with a traditional hickory handle. Replaceable comb (FAISC1N) and chisel (FAICB1N) bits 25mm (1in) are available separately.

1 x Faithfull Dead Blow Black PVC Hammer 900g (2 lb)

1 x Faithfull Dead Blow Black PVC Hammer 680g (1 lb 8oz)

The Faithfull Cross Pein is a small versatile hammer, also known as a telephone hammer. Designed for accurate installation of precision fixings, such as clips, panel pins etc. Fitted with a hickory handle.

The Faithfull Carver's Mallet is manufactured from close grain beech. This round head mallet is ideal for most hand carving applications. The circular cross section handle helps make the mallet comfortable to use and is permanently wedged and glued to the single piece head.

Size: 127mm (5in) Weight: 540g