This Stanley Metal Latch Toolbox has the following specification: Dimensions: 508 x 249 x 249mm

This Stanley Metal Latch Toolbox has the following specification: Dimensions: 400 x 209 x 183mm

The Stanley FatMax Mobile Chest has a lock mechanism in the lid to hold a level and a saw. Tools can also be stored vertically within the chest. An all-round water seal keeps valuable contents safe. Heavy-duty wheels give mobility on rough surfaces. The portable tray is ideal for hand tools and small parts, and the lid has an integrated lock and keys to keep tools protected. It also has an integrated V-groove for any on-site sawing needs and the telescopic handle slides in for compactness when not in use. A back end handle enables convenient lifting into a vehicle for two people. Please Note - Tools NOT included Specification: Dimensions: 910 x 516 x 431mm

This Stanley FatMax Waterproof IP53 Toolbox has the following specification: Dimensions: 58.4 x 30.5 x 26.7cm.

The Stanley FatMax Tool Organiser Bag can be easily converted into a work station once opened (A-frame structure). With reinforced body and plastic sides that will protect your contents. The material combination provides maximum protection against wear and tear, whilst the plastic feet provide protection from moisture and dirt. For comfortable transportation it features padded shoulder straps and a rubber handle. Offers outer storage with outside pockets for frequently used tools. On both sides the covers open outwards providing 100% visibility of all tools and they are organised in an upright position to enable easy access while on the job. Specification: Dimensions: 440 x 390 x 250mm

The FatMax Cantilever Rolling Workshop is the ideal solution for tradesmen who need to transport large amounts of equipment and materials to the worksite. It saves time and effort on repeated trips to the van. The telescopic handle provides easy manoeuvrability. It opens up easily into a 4-level workstation, with a giant lower bin, which is for bulky materials and equipment such as paint cans, large components and power tools. There is a toolbox with a lift out tray for smaller tools, which fits neatly in to the fold out lid, along with a large adjustable organiser for nails, screws and other small components. Dimensions: 549 x 733 x 413mm.

Stanley have produced a 2 in 1 mobile work station that separates in seconds into 2 units. The Stanley 193968 has an extra large toolbox with removable tray that maximises volume utility and a giant bin capacity. This Stanley mobile tool chest has many features in store and gives the user a top quality all round winner in tool storage with its swivel front drawer (carousel) and lid organizers for small parts, large trucking wheels for rough on site conditions, new one piece strong plastic handle, all weather nickel plated toolbox and side latches and with a load capacity of 88lbs you get a good array of tools at your side. The Stanley 193968 conveniently fits into your car or van, and is durable and strong. It features an extra large toolbox with removable tray and a giant lower bin to store bulky items. A swivel front drawer (carousel), and lid organisers are ideal for storing small parts. Large wheels ensure smooth mobility on rough surfaces. The handle is of durable 1-piece plastic construction. It has a load capacity of 88lbs and features nickel plated toolbox and side latches. It is durable, strong and easy to operate. Specification: Dimensions: 473 x 302 x 627mm

The Stanley FatMax Tool Bag is made with heavy-duty 600 denier fabric with leather reinforcements for long lasting durability. It offers maximum tool protection thanks to its rigid and waterproof plastic bottom. An ergonomic rubber grip carry handle and heavy-duty shoulder strap make lifting more comfortable. The open structure makes for quick and easy tool access and there is a removable divider with belt clip. The interior tool loops keep everything in place. Specification: Dimensions: 460 x 260 x 100mm

This Stanley FatMax Waterproof IP53 Toolbox has the following specification: Dimensions: 71 x 30.8 x 28.5cm

This Stanley Tool Bag has a compact size and is fitted with comfortable cotton-padded handles while a 6mm rubber foam reinforced bottom adds cushioning. Made from hard-wearing 600 x 600 denier fabric for durability. It has 8 interior and 2 exterior pockets and a mesh pocket for personal small belongings. Specification: Dimensions: 300 x 250 x 130mm

This Stanley Mobile Job Chest provides maximum storage and easy transportation for larger tools, general equipment and workshop materials. The chest has extra large, rust-resistant metal latches, which are durable and long lasting. For extra security, the chest has an integrated key lock and the latches have padlock eyes. The chest has a telescopic steel handle with soft grip for easier transportation, and it comes complete with a removable tote tray. It has wide, heavy-duty, rubber coated wheels for durability. The lid acts as a wide work surface, that includes two 2in x 4in saw grooves. Specification Dimensions: 946 x 578 x 587mm

This Stanley Mobile Job Mobile, 24 gallon, Chest has extra-large durable rust resistant metal latches with padlock eyes for security. The chest has a 91-litre capacity which makes it ideal for storage and easy transportation for larger tools, general equipment, and workshop materials.The removable tote tray fits neatly into the wide soft grip telescopic handle, while the top lid has butterfly screws for attaching levels, hand saws and other accessories. Easily transportable with heavy-duty road-tested wheels. Specifications: Dimensions: 764 x 478 x 489mm.Capacity: 91L (24 gallon).

Toolbox 19in 12 1/2in Toolbox

Dimensions: 562 x 314 x 300mm.

The professional organiser has 8 deep compartments and a polycarbonate super clear lid to lock them all in place. Three sizes of conveniently removable compartments allow customisation. It also has a comfortable moulded grip handle. 6-years warranty. Specification: Dimensions: 423 x 334 x 98mm

This Stanley Metal Latch Toolbox has the following specification: Dimensions: 610 x 27 x 284mm

This Stanley Metal Latch Toolbox has the following specification: Dimensions: 489 x 26 x 248mm

This Stanley Metal Latch Toolbox is made from tough durable plastic. It comfortably stores a large range of tools for easy transportation around the home or work site.There is a tote tray inside for more frequently used items and two handy storage compartments on the lid for smaller tools or fixings.Fitted with a soft grip handle for added comfort. Specification: Dimensions: 411 x 199 x 185mm.

The Stanley Tools Modular Rolling Toolbox is a 3-in-1 portable workshop solution, which separates into 3 toolboxes in a matter of seconds. It includes an extra-large deep bin for safe and convenient storage of power tools and hardware, a medium-sized toolbox with removable tote tray ideal for storing hand tools, and a shallow toolbox for small parts and accessories. Each toolbox features an auto-lock front stacking latch for quick and easy connecting/releasing, even with one hand. They are also fitted with strong, all-weather, easy-lock front metal wire latches. For easy transportation, the rolling toolbox has heavy-duty 7in wheels and a 35mm wide telescopic handle for manoeuvrability, which can be folded down to conveniently fit into a car or van. Specification: Dimensions: 515 x 420 x 760mmMax. Load: 45kg

The Stanley Tools Essential Toolbox has an innovative design with an internal tool tray and small top organisers in the lid to enable small parts organisation. Fitted with ergonomic metal catches and geometric lock latches for smooth closing and opening. The toolbox can be locked with a small padlock (not supplied) for extra safety and to reduce the risk of theft. Specification: External Dimensions: 665 x 335 x 280mmInternal Dimensions: 640 x 280 x 220mm

The Stanley Tools FatMax Rolling Duffle Bag fits a wide range of tools including 60cm levels, saws and tapes. An internal partition helps keep your tools organised. Large opening for easy access to content. Made from durable 600 denier fabric with a rivet construction and waterproof base for increased wear resistance. Fitted with an easy carry handle and shoulder strap as well as a telescopic handle and 2 wheels for easy transport of heavy loads. Specification: Dimensions: 700 x 305 x 318mmMax. Load: 20kg

The Stanley Tools FatMax Work Step Toolbox combines a toolbox and work step in one. It has a lightweight design with an ergonomic carry handle for easy carrying. The work step has stainless aluminium legs with non-slip feet to ensure optimum stability and longevity. For added safety the step has been fitted with safety lock buttons. Specification: External Dimensions: 640 x 296 x 287mmInner Dimensions: 560 x 265 x 200mmMax. Load: 30kgMax. Standing Load: 150kgWeight: 6.2kg

The Stanley Tools FatMax Flip Bin Organiser has 12 removable, levered storage compartments, providing storage for small parts, components or accessories. Its lid is made from transparent polypropylene, making it virtually unbreakable whilst allowing a full view of the contents. A plastic handle with textured grip allows the organiser to be moved comfortably. For added versatility, multiple organisers can be clipped together using the side latches for easy transportation. Specification: Dimensions: 446 x 356 x 116mm

The Stanley Tools Essential Rolling Workshop consists of: a large bin, which is ideal for storing multiple large power tools; an interchangeable middle tray module, which can be added or removed; and an 18in toolbox. The organisers allow for small parts storage such as screws, wall plugs, bolts and nuts. Constructed from plastic for added durability and enhanced longevity. Fitted with heavy-duty metal latches, top folding handle and large 7in coated wheels, which make this workshop easy to manoeuvre during transportation. Specification Dimensions: 475 x 285 x 623mmMax Load: 20kg

This Stanley Tools FatMax Bag has a heavy-duty telescopic handle and wheels for easy transportation and increased mobility. The FatMax Laptop Bag (FMST1-80149) (NOT SUPPLIED) can be attached to the telescopic handle. The bag has a large capacity and wide top opening for easy access, meaning it will hold multiple power tools, hand tools and accessories. With multiple pockets inside and outside for maximum organisation. It is made from strong 600 denier fabric for increased protection from wear and tear. The wide front pockets feature internal organisation and can function as a work station. Specification: Dimensions: 500 x 360 x 410mm

The Stanley FatMax Quick Access Premium Tool Bag combines the advantages of both closed and open soft storage solutions into one. It has been constructed from durable materials for internal protection against tool damage. The high quality tarpaulin and 600 denier fabric provide added durability for increased wear resistance. 3 large tool compartments and multiple pockets provide a quick and convenient storage solution depending on your needs. The reinforced waterproof base protects against dirt and moisture. The ergonomic padded shoulder strap allows for easier carrying of heavier loads. FEATURES: - Open mouthed workstation with 3 internal compartments and 1 external pocket- Combines strong flexible high quality Tarpaulin with 600D- Large rigid open compartment for quick tool access - Two large separate zippered wide compartments- Padded shoulder straps for heavy load carriage- Rigid water-proof plastic bottom- Personal belongings compartment for wallet, keys, mobile phone- Multiple pockets and tool holders for a wide variety of tools Specification: Dimensions: 470 x 230 x 350mm

The STANLEY FATMAX Quick Access Premium Tote Bag combines the advantages of both closed and open soft storage solutions into one. It has been constructed from durable materials for internal protection against tool damage. The high quality tarpaulin and 600 denier fabric provide added durability for increased wear resistance. 3 large tool compartments and multiple pockets provide a quick and convenient storage solution depending on your needs. The reinforced water proof base protects against dirt and moisture. The ergonomic steel bar handle and shoulder strap allow for easier carrying of heavier loads. FEATURES: - Steel bar handle and padded shoulder straps for heavy load carriage- Combines strong flexible high quality Tarpaulin with 600D- Large open tote design for quick and easy access to all tools simultaneously- Opens up as a workstation when working, tightly closed when travelling- 3 internal compartments and 1 external pocket- Rigid water-proof plastic bottom- Two separate zippered wide compartments- Personal belongings compartment for wallet, keys, mobile phone

The STANLEY FATMAX Quick Access Premium Backpack combines the advantages of both closed and open soft storage solutions into one. It has been constructed from durable materials for internal protection against tool damage. The high quality tarpaulin and 600 denier fabric provide added durability for increased wear resistance. 3 large tool compartments and multiple pockets provide a quick and convenient storage solution depending on your needs. The reinforced water proof base protects against dirt and moisture. The ergonomic padded back and shoulder strap allows for easier carrying of heavier loads. There is also a separate internal compartment which is ideal for safely storing a laptop. FEATURES: - Tool backpack workstation with 3 internal compartments and 1 external pocket- Large open compartments for quick tool access- Combines strong flexible high quality Tarpaulin with 600D- Premium ergonomic padded back with air mesh- Padded shoulder straps for heavy load carriage- Secure padded laptop compartment- Multiple pockets and tool holders for a wide variety of tools- Rigid water-proof plastic bottom- Personal belongings compartment for wallet, keys, mobile phone Specification: Dimensions: 355 x 230 x 470mm

Dimensions: 59.5 x 28 x 26cm.

Size: 50cm (19in)

Size: 16in.

This Stanley FatMax Plastic Fabric Open Tote has a strong injected polypropylene frame that gives the bag a strong and rigid structure. It is made from tough 600 Denier and ballistic nylon fabric and is hard-wearing, strong and durable. The tote has multiple internal and external pockets that provide maximum organisation and storage space for a variety of tools. The open design of the tote provides easy access to tools and power tools. Covered front pockets provide secure storage of small parts or personal items. This model is supplied with a cover. Specification: Dimensions: 490 x 280 x 310mm

The Stanley 79-206 Rolling Workshop has portable detachable containers with a handle on top allowing for customised storage options and to carry all the options you need. The top detachable toolbox has a drawer and one hand operation latch, 2 drawer storage unit with shallow and deep drawer and bottom flip bin with back pocket for long tools storage (saw level) - versatile organisation for various sizes of tools and small parts.The aluminium telescopic back handle is for easy elevation, the handle can be lowered for storage. Heavy-duty ballbearing slides for the drawers, offering a quality drawer sliding system with better grips and locking mechanism. While the heavy-duty 780mm wheels allow for easy on-site manoeuvrability. Specification: Dimensions: 86.6 x 48.8 x 34.8cm.

The Stanley FatMax Shallow Professional Organiser has 8 removable storage compartments, providing storage for small parts, components or accessories. It is made from transparent polypropylene with a virtually unbreakable lid that allows the contents to be viewed easily. Featuring a waterproof seal that not only prevents water, but also dust and foreign particles from entering. It has strong metal catches. A plastic handle with textured grip allows the organiser to be moved comfortably. For added versatility, multiple organisers can be clipped together using the side latches for easy transportation. Specification: Dimensions: 160 x 440 x 750mm

The Stanley Tools Essential Toolbox has an innovative design with an internal tool tray and small top organisers to enable small parts organisation. Fitted with ergonomic metal catches (2 on 48cm and 1 on 32cm Box) and geometric lock latches for smooth closing and opening. The toolbox can be locked with a small padlock for extra safety and to reduce the risk of theft. Includes: 1 x Stanley Tools Essential Toolbox 32cm. 1 x Stanley Tools Essential Toolbox 48cm.

The Stanley SORTMASTER™ Multi-Level Organiser has a transparent lid which allows visibility of it contents. Its cantilever design ensures the ability to access each level independently. This organiser has a suitcase style carry handle for easy carrying. In addition, it can be securely stacked on top of the Junior Sort Master™ to allow them to be carried together. Supplied with 4 removable dividers and 12 removable cups: 6 (LxWxH: 109 x 79 x 44mm) 6 (LxWxH: 52 x 79 x 44mm) Specification Closed Dimensions (WxDxH): 300 x 400 x 137mmExtended Top Dimensions (WxDxH): 560 x 300 x 137mm

This Stanley FatMax Tool Chest has an extra large capacity of 240 litres. It features innovative top aluminium rails, allowing materials to be strapped to the top of the chest. The tool chest has an IP65 rated water seal for protection against the elements and has heavy-duty metal latches and hinges for added durability. Its 7.5in rubber wheels allow easy manoeuvrability. Specification: Dimensions: 990 x 590 x 620mm

Stanley Tools Basic Toolbox With Organiser Top has the following specification: Dimensions: 482 x 254 x 250mm.

Stanley Tools Basic Toolbox With Organiser Top has the following specification: Dimensions: 406 x 205 x 195mm.

Stanley Tools Basic Toolbox With Organiser Top has the following specification: Dimensions: 320 x 188 x 132mm.

The Stanley FatMax Multi Access Bag features dual side opening storage space, with two separate main wide opening compartments providing a large storage space for hand tools/power tools. It has a free-standing rigid structure with a reinforced plastic base to protect from water and dirt. There are multiple pockets for easy and convenient organisation of tools. Other features include a closed secure front pocket, padded shoulder strap and multiple internal and external pockets and loops. Specification: Dimensions: 430 x 280 x 300mm

The Stanley FatMax Wheeled Technician's Suitcase has an ergonomic, aluminum telescopic handle and bearing skating wheels for smooth and easy mobility. Its thick rubber coated handle provides superior grip and comfort. It also features supporting legs for stability (no tipping over) and tough metal latches. The accordion structure provides full visibility and accessibility. Removable dividers allow for flexible customization and organization; 1 long divider, 4 short dividers, 3 cups and covers. It has a glass fiber reinforced PP body and lid for durability. Specification: Dimensions: 540 x 400 x 435mm

The Stanley FatMax Small Organiser is made from durable polycarbonate plastic with a water seal, meaning that it is suitable for outdoor use. It has 6 removable cups to allow flexible configurations and a transparent lid for easy viewing of stored parts. The organiser has side latches which allow stacking of up to 3 organisers, which can click together for easy, one-handed transportation. An integrated carry handle provides an easy grip. Specification: Dimensions: 261 x 115 x 359mm

The Stanley Tool Bag Backpack has been designed for easy hands-free tool transport that spreads the weight of the tools instead of lifting in one hand. It contains a separate laptop/power tool compartment, that is large enough for a 15.6in laptop. With an additional small front compartment for personal storage and two side mesh pockets. Made from 600 x 600 denier fabric for maximum durability and plastic base feet to help to protect against moisture and dirt. Has a paddded back and adjustable shoulder straps for extra comfort. Fitted with extra large, rubber coated zip pull tabs for easy grip, even when wearing gloves.

The Stanley Click Connect™ Organiser allows easy access to tools. It features removable latches which allow easy connection to other Click Connect™ toolboxes.The organiser has removable dividers to allow personal customisation and organisation of accessories. Specification: Dimensions: 507 x 290 x 90mm.

The Stanley Click Connect™ Deep Toolbox allows easy access to tools. It features removable latches which allow easy connection to other Click Connect™ toolboxes. The toolbox has removable dividers to allow personal customisation and organisation of tools. Its lid features an organiser which is suitable for storage of accessories, drills and bits. Dimensions: 507 x 310 x 168mm.

This Stanley 3-In-1 Tool Organiser is made from 2mm Polypropylene plastic so it is tough and durable. When closed the case has a robust structure that provides durability and security whilst transporting. The case has a 15kg weight limit. Other features include movable dividers that provide specific configuration for smaller parts and / or tools and power tools, and a central rigid tote that is perfect for hand tools. Each side is fitted with a polypropylene lid to keep everything in its place. Specification: Dimensions: 310 x 190 x 160mm

The Stanley FatMax Technician's Suitcase has a glass fibre reinforced PP body and lid for durability. The accordion structure provides full visibility and accessibility. Removable dividers allow for flexible customization and organization; 1 long divider, 4 short dividers, 3 cups and covers. Its thick rubber coated handle provides superior grip and comfort. Fitted with supporting legs for added stability (no tipping over) and tough metal latches. Supplied WITHOUT tools. Specification: Dimensions: 500 x 400 x 200mm

This bonus pack contains: 1 x One Touch Toolbox DIY 40cm (16in) 1 x One Touch Toolbox DIY 60cm (24in)

The Stanley FatMax Open Mouth Rigid Tool Bag provides easy access to tools, whilst the multiple internal and external pockets provide maximum organisation potential. The ergonomic design features a padded shoulder strap and a rubber grip handle for comfortable carrying. The injected polypropylene base protects the bag from moisture and dirt. The bag is made from 600 denier fabric that is hard-wearing, strong and durable, which resists cuts and scratches. Specification: Dimensions: 500 x 300 x 290mm

The Stanley FatMax Round Top Rigid Tool Bag has an outer made from 1200 denier ply fabric and has an inner, 600 denier polypropylene lining. This provides long lasting durability. The tool bag has a rigid and waterproof plastic base and its padded shoulder strap allows easier carrying of heavy loads. The bag has multiple compartments for many storage needs, with easy access pockets. The magnetic quick close operation of the '2 position' pockets allows tools to be secured while transporting and easily accessible when working. PLEASE NOTE TOOLS ARE NOT INCLUDED!

The Stanley FatMax Double Sided Plumbers Bag conveniently opens up to a full workstation. Its double side opening enables separation of materials and tools. It offers ideal fit and protection for tools like pipe cutters, pipe benders, basin wrenches, making it perfect for plumbers. The bag features both external and internal pockets which enable maximum organisation, and its vertical storage pockets provide quick and easy access to all tools and small parts. The bag has a durable, anti-moisture material on its sides and an injected polypropylene bottom to protect against wet and damp surfaces. Specification: Dimensions: 520 x 280 x 310mm

The Stanley STST1-70718 Open Tool Bag is great for toting around a reasonable selection of everyday tools for most jobs, and is very well made. Plenty of pockets for smaller items. The open design allows for quick access to your hand tools. Vertical storage pockets and loops for maximum organisation and accessibility. Small organiser compartment for drill bits and small parts. It is fitted with a strong, adjustable shoulder strap. Size: 32 x 20 x 26cm (12.1/2 x 8 x 10.2/8in).

The Stanley Contractor Chest has a huge volume capacity of 60 litres and a deep portable tray that is perfect for power and hand tools. The integral metal hinges provide durability and the chest has a one touch central latch that gives quick and easy accessibility. With durable 7 inch wheels that provide easy mobility, combined with the over moulded metal pull handle, it is easy to transport around the worksite. The chest features a bi-material handle on the top cover for convenient grip, and the v-groove in the lid that allows for easy cutting of materials. Dimensions: 620 x 380 x 420mm.

The Stanley 1-70-327 2-in-1 Mobile Work Centre, a detachable top toolbox unit, with small parts storage on top. The bottom bin has large 7-inch wheels and the pull handle on top allows for easy convenient manoeuvrability.Large metal latches connecting the units, provide extra security whilst in transport. The mobile work centre has a huge storage volume for power tools, hand tools, small parts, and accessories. Specification: Dimensions: 475 x 284 x 570mm.

This Stanley 3-in-1 Mobile Work Centre has a detachable toolbox unit with small parts storage on top and a detachable mid-section for small parts and accessories. The bottom bin has large 7-inch wheels and the pull handle on top allows for easy convenient manoeuvrability. Large metal latches connecting the units, providing extra security whilst in transport. The 3-In-1 Mobile Work has huge storage volume for power tools, hand tools small parts and accessories. Specification: Dimensions: 475 x 284 x 630mm.

This Stanley Open Tote Tool Bag has a secure, rigid and waterproof base. It comes with a variety of internal and external pockets, to protect valuables from dust and water spills which can easily happen on a job. Large open top allows for easy access as well as more space for larger tools. It has an easy carry handle, and is secure and accessible. Specification: Dimensions: 250 x 590 x 290mm

This Stanley Toolbox with Tote Tray Organiser has the following specifciation: Dimensions: 556 x 320 x 249mmWeight: 2.7kg

The Stanley 1-70-316 One Touch Toolbox has a heavy-duty design and extra width soft grip handle on top for easy lifting. It has a one-touch latch for easy opening of the toolbox. It has a 2/3rd removable tote tray which allows enough space for large tools to be stored underneath and a deep drawer with ball bearing slides for versatile organisation of various sizes of tools and small parts. It has a V-groove in the lid, which is suitable for use when cutting timber or pipework and an integrated padlock eye for securing tools and contents. Dimensions: 481 x 279 x 287mm

The Stanley Tools FatMax Metal Top Chest has a reinforced steel frame with a steel body construction with deep drawers that provide storing space for a variety of tools. It has an internal locking mechanism for increased safety. The auto-return drawers are self closing for security and ease of use. They are fitted with heavy-duty sliders, bearings and stops. The drawers are fitted with non-slip mats, to prevent the movement of stored objects. The top compartment features charger grommits, allowing you to charge your tools whilst the chest is locked, providing increased security and peace of mind. The lid is fitted with gas struts, that keep the lid open for easy access, when needed. Specification: Size: 995 x 500 x 980mm

The Stanley Tools FatMax Metal Cabinet has a reinforced steel frame with a steel body construction with 457mm (18in) deep bottom drawer, that provides storage space for a variety of tools. The cabinet has 4 large casters, 2 fixed and 2 swivel with lock, with a max load capacity of 450kg. It also has a large metal handle for easy manoeuvring and a central lock for increased safety. The auto return drawers are self closing for security and ease of use. They are fitted with heavy-duty sliders, bearings and stops. The deep bottom drawer has a storage capacity of up to 90kg and the standard drawers can hold up to 45kg. The drawers are fitted with non-slip mats, to prevent the movement of stored objects. Specification: Dimensions: 600 x 500 x 980mm

The Roughneck ROU90120 Wide Mouth Tool Bag is made of heavy-duty, PVC coated polyester fabric to make it hardwearing and durable. It has a reinforced base with rubber pads for additional protection. A reinforced rope handle and an adjustable shoulder strap allow easy carrying. The bag has a wide opening top with a heavy-duty zip, which provides easy access to its contents. 8 internal and 11 external pockets allow excellent organisation of tools and accessories.

This Raaco Bin Wall Panel comes complete with 32 bins and has a galvanized finish. The wall panel is easy to install, and the bins provide excellent storage and organisation for small tools and accessories.The bins are made from strong polypropylene and are designed to provide easy access to the contents. They can be easily placed and removed from the wall panel. Specifications: Bins: 32 x 3-160 (75 x 125 x 173mm).Load Capacity: 5kg.

The Raaco Boxxser 55 4x4 Pro Organiser Case, a high quality assorter case is made of strong and durable polycarbonate for the professional. The design incorporates a double skin wall, superior hinges and a clear visibility lid. A reliable and secure locking mechanism, in conjunction with a profiled lid, ensures the contents do not spill in transportation. They are supplied with three identification tags for ease of retrieval and recognition. Box dimensions: 55mm x 241mm x 225mm.Contains a selection of 9 removable inserts.Load capacity: 8kg.

The Raaco 616-123 Metal Cabinet has 16 assorted drawers for a variety of storage options. The cabinet is made of painted steel and the drawers are made of polypropylene (PP). Drawers: 12 x 150-01 (41 x 67 x 153mm), 3 x 105-02 (64 x 91 x 154mm) 1 x 150-03 (64 x 279 x 155mm).

The Raaco 624-01 Metal Cabinet has 24 drawers, each drawer can be divided into 16 compartments. The cabinet is made of painted steel and the drawers are made of polypropylene (PP). Drawers: 24 x 150-01 (41 x 67 x 153mm).

The Raaco 936-01 Metal Cabinet has 36 drawers, each drawer can be divided into 16 compartments. The cabinet is made of painted steel and the drawers are made of polypropylene (PP). Drawers: 36 x 150-01 (41 x 67 x 153mm)

The Raaco 1240-123 Metal Cabinet has 40 assorted sized drawers for a variety of storage options. The cabinet is made of painted steel and the drawers are made of polypropylene (PP). Drawers: 36 x 150-01 (41 x 67 x 153mm), 3 x 105-02 (64 x 91 x 154mm) 1 x 150-03 (64 x 279 x 155mm).

The Raaco 1224-02 Metal Cabinet has 24 x 150-02 drawers, each drawer can be divided into 3 compartments. The cabinet is made of painted steel and the drawers are made of polypropylene (PP). Drawers: 24 x 105-02 (64 x 91 x 154mm).

The Raaco 1248-01 Metal Cabinet has 48 drawers, each drawer can be divided into 16 compartments. The cabinet is made of painted steel and the drawers are made of polypropylene (PP). Drawers: 48 x 150-01 (41 x 67 x 153mm).

The Raaco 1260-00 Metal Cabinet has 60 drawers, each drawer can be divided into 4 compartments. The cabinet is made of painted steel and the drawers are made of polypropylene (PP). Drawers: 60 x 150-00 (41 x 55 x 153mm).

The Raaco Portable Handy Box comes complete with 4 A4 polyproylene (PP) drawers which are fitted with sliding locks. It can be stacked or wall-mounted. Drawers Include: 2 x A4 Profi Service Case Assorter 55 4 x 8-15 15 Inserts. Removable Insert Sizes: 5 x A9-1 (47 x 39 x 55mm), 2 x A9-2 (47 x 39 x 109mm), 1 x A9-3 (47 x 39 x 163mm), 1 x A9-4 (47 x 39 x 218mm), 4 x A8-1 (47 x 55 x 79mm), 1 x A8-2 (47 x 55 x 157mm) 1 x A7-1 (47 x 79 x 109mm). 2 x A4 Profi Service Case Assorter 55 4 x 8-17 17 Inserts. Removable Insert Sizes: 4 x A9-1 (47 x 39 x 55mm), 4 x A9-2 (47 x 39 x 109mm), 8 x A8-1 (47 x 55 x 79mm) 1 x A7-1 (47 x 79 x 109mm).

The Raaco A4 Profi Assorter 55 4 x 8-17 is made from strong polypropylene, with 17 removable inserts and an opaque lid for easy visibility. A grid system ensures inserts remain firmly in place. The assorter is fitted with reliable catches and handle with a close fitting profiled lid for safe transportation of contents. Removable Insert Sizes: 4 x A9-1 (47 x 39 x 55mm), 4 x A9-2 (47 x 39 x 109mm), 8 x A8-1 (47 x 55 x 79mm) 1 x A7-1 (47 x 79 x 109mm).

The Raaco A4 Profi Assorter 55 4 x 8-15 is made from a strong polypropylene, with 15 removable inserts and an opaque lid for easy visibility. A grid system ensures inserts remain firmly in place. The assorter is fitted with reliable catches and handle with a close fitting profiled lid for safe transportation of contents. Removable Insert Sizes:5 x A9-1 (47 x 39 x 55mm)2 x A9-2 (47 x 39 x 109mm)1 x A9-3 (47 x 39 x 163mm)1 x A9-4 (47 x 39 x 218mm)4 x A8-1 (47 x 55 x 79mm)1 x A8-2 (47 x 55 x 157mm)1 x A7-1 (47 x 79 x 109mm)

The Raaco A4 Profi Service Case Assorter is made of strong polypropylene with 32 fixed, same size compartments. Comes with a close fitting opaque lid complete with a 'U' profile pattern for easy visibility and safe transportation of stored contents. Reliable sliding catches and good quality hinges complete the box. 32 Fixed Compartments: 32 (38 x 54mm).

The Raaco A4 Profi Service Case Assorter is made of strong polypropylene with 15 fixed various sized compartments. Comes with a close fitting opaque lid complete with a 'U' profile pattern for easy visibility and safe transportation of stored contents. Reliable sliding catches and good quality hinges complete the box. 15 Fixed Compartments: 1 (238 x 54mm), 1 (78 x 166mm), 2 (118 x 54mm), 3 (78 x 54mm) 8 (38 x 54mm).

The Raaco A5 Profi Service Case Assorter is made of strong polypropylene with 18 fixed, same size compartments. Comes with a close fitting opaque lid for easy visibility and safe transportation of stored contents. A reliable sliding catch and good quality hinges complete the box. 18 Fixed Compartments: 18 (36 x 52mm).

The Raaco A5 Profi Assorter is made from strong polypropylene, with 9 fixed compartments of various sizes. There is a close fitting opaque lid for easy visibility and safe transportation of stored contents. The assorter is fitted with a reliable sliding catch and good quality hinges complete the box. 9 Fixed Compartments: 1 (223 x 52mm), 2 (73 x 52mm), 2 (36 x 105mm) 4 (36 x 52mm).

The Raaco A6 Profi Assorter 6-12 is made from strong polypropylene, with 12 equal sized fixed compartments. There is a close fitting opaque lid for easy visibility and safe transportation of stored contents. The assorter is fitted with a reliable sliding catch and good quality hinges complete the box. 12 Fixed Compartments: 12 (39 x 36mm).

The Raaco A6 Profi Assorter 6-7 is made from strong polypropylene, with 7 fixed compartments of various sizes. There is a close fitting opaque lid for easy visibility and safe transportation of stored contents. The assorter is fitted with a reliable sliding catch and good quality hinges complete the box. 7 Fixed Compartments: 1 (160 x 36mm), 2 (79 x 36mm) 4 (39 x 36mm).

This Raaco high quality assorter case is made of strong and durable polycarbonate for the professional. The design incorporates a double skin wall, with superior hinges and a clear visibility lid. It has a reliable and secure one-handed locking mechanism in conjunction with a profiled lid that ensures contents do not spill in transportation. Supplied with three identification tags for ease of retrieval and recognition. Box dimensions: 55mm x 421mm x 361mm.Contains 45 removable inserts of equal size.

Highest quality assorter cases made of strong and durable polycarbonate for the professional. The design incorporates a double skin wall, superior hinges and a clear visibility lid. A reliable and secure one handed locking mechanism in conjunction with a profiled lid ensures contents do not spill in transportation. Supplied with three identification tags for ease of retrieval and recognition. Box dimensions: 55mm x 421mm x 361mm. Contains 25 removable inserts of equal size.

The Raaco 1321-07 Metal Cabinet has 40 assorted drawers for a variety of storage options. The cabinet is made of painted steel and the drawers are made of polypropylene (PP). Drawers: 35 x 150-00 (41 x 55 x 153mm), 3 x 105-02 (64 x 91 x 154mm) 2 x 150-04 (64 x 139 x 155mm).

This pack of Raaco Mixed Bag Of Drawer Dividers is a mixed set of 15 for use with Raaco cabinets. They are made to the highest standards. Contents:10 x dividers for drawer 150-00.3 x dividers for drawer 150-02.2 x dividers for drawer 150-03/150-04.

The Raaco C11-44 Metal Cabinet has 44 drawers, which can be sub-divided. The cabinet is made of painted steel and the drawers are made of polypropylene (PP). The cabinet can stand alone or be hung on a wall. Specification: Drawers: 40 x 150-00 (41 x 67 x 153mm), 3 x 150-02 (64 x 91 x 154mm) 1 x 150-03 (64 x 279 x 155mm).Height: 510mm, Width: 306mm, Depth: 147mm.Weight: 5.8kg.

1 x Olympia Medium-Duty Canvas Tool Bag 76cm (30in)

1 x Olympia Medium-Duty Canvas Tool Bag 60cm (24in)

The Metabo Tool Bag has a robust and compact design. It is made from water-repellent and tear-proof 600D polyester. The integrated base plate features strips to protect the bag contents. On the inside of the bag there are 3 compartments with hook loop straps to take 2 battery packs and one charger. On the outside there is a spacious pocket with zipper and 2 other small pockets on the left and right head with hook loop closure for quick access. The bag is fitted with comfortable side pads and a padded shoulder strap. Three reflective Metabo logos provide optimum visibility on the construction site. Specification: Dimensions (LxWxH): 460 x 260 x 280mm

The Milwaukee Fuel™ Wheeled Bag is made from hard wearing materials with heavy-duty zippers and fasteners. The plastic base protectors provide additional strength and rigidity. It is ideal for storing a range of small to large size tools including power tools. This tough and durable bag is easy to carry with your choice of twin carry handles and hook and loop grip or a padded adjustable shoulder strap, or if things get too heavy, the bag also includes tough rubber casters to make it mobile. Holds up to 6 x 18 Volt cordless tools.

The Milwaukee Hand Tools PACKOUT™ Mounting Plate provides multiple mounting configurations and allows you to turn the PACKOUT™ into a stationary storage system. Made from impact-resistant polymer. Connects to all Milwaukee PACKOUT™ modular storage. Specification: Weight Capacity: Floor: 45kg, Wall: 22kg.Dimensions: 600 x 470 x 30mm.

The Milwaukee Hand Tools PACKOUT™ Jobsite Cooler is made from 1680D ballistic nylon and is fitted with rugged metal zippers, ideal for tough jobsite conditions. The impact-resistant polymer base helps to protect the contents from water, dirt and tear. The cooler utilises double insulation and a food-grade, leakproof liner to keep ice cold for 24 hours without leaking. It has a large 20L volume storage capacity with a separate dry compartment, ideal for storing food. Other features include: a tape measure clip with a bottle opener and a tech pocket for storing tablets and electronic devices. Multiple carry options: cushioned shoulder strap and top handle. Part of the PACKOUT™ modular storage system.

The Milwaukee Hand Tools PACKOUT™ Backpack is made from 1680D ballistic nylon, ideal for tough jobsite conditions. The impact-resistant polymer base protects contents from water and dirt. It also allows the backpack to stand upright. It has 48 pockets, including a hardshell protected instrument pocket. The bag is fitted with cushioned shoulder straps, extra back padding, a chest strap, attachment strap for rolling bags and heavy-duty harness for ultimate jobsite comfort. Part of the PACKOUT™ modular storage system. Specification: Dimensions: 380 x 240 x 500mm

The Milwaukee Hand Tools PACKOUT™ Tech Bag is made from 1680D ballistic nylon and is ideal for tough jobsite conditions. The impact-resistant polymer base protects contents from water, dirt and tear. It has 58 pockets, including a hardshell protected instrument pocket. It also offers secure and protected storage for laptops and tablets. Multiple carry options: cushioned shoulder strap and top handles. Part of the PACKOUT™ modular storage system. Specification: Dimensions: 430 x 270 x 450mm

The Milwaukee Hand Tools PACKOUT™ Flat Trolley transports multiple PACKOUT™ boxes and bags. Durable castors enable easy rolling, even with a heavy load on the jobsite. Fitted with a locking brake and 2 side locks to stop the trolley and easily connect the PACKOUT™ boxes and bags. Part of the PACKOUT™ modular storage system. Specification: Weight Capacity: 113kg.Dimensions: 610 x 480 x 190mm.

1 x Milwaukee Hand Tools PACKOUT™ Duffel Bag 50cm

1 x Milwaukee Hand Tools PACKOUT™ Duffel Bag 38cm

The Milwaukee Hand Tools PACKOUT™ Compact Slim Organiser is constructed from impact-resistant polymers for jobsite durability. The lid features an IP65 rated weather seal to keep out rain and jobsite debris. The interior features 5 removable bins (1 large bin and 4 small bins) that can be mounted onto hooks, nails etc. for easy access. The 'no-travel' bins, seal to prevent the contents from migrating between bins during transport. Part of the PACKOUT™ modular storage system. Specification: Dimensions: 250 x 380 x 65mm

The Milwaukee Hand Tools PACKOUT™ Slim Organiser is constructed from impact-resistant polymers for jobsite durability. The lid features an IP65 rated weather seal to keep out rain and jobsite debris. The interior features 10 removable bins (2 large and 8 small bins) that can be mounted onto hooks, nails etc. for easy access. The 'no-travel' bins, seal to prevent the contents from migrating between bins during transport. Part of the PACKOUT™ modular storage system. Specification: Dimensions: 500 x 380 x 65mm

The Milwaukee Hand Tools Jobsite Cooler is made from 1680D ballistic nylon and fitted with rugged metal zippers, ideal for tough jobsite conditions. The cooler utilises double insulation and a food-grade, leakproof liner to keep ice cold for 24 hours without leaking. It has a large storage capacity with a separate dry compartment, ideal for storing food. Other features include: a tape measure clip with a bottle opener and a tech pocket for storing tablets and electronic devices. Multiple carry options: cushioned shoulder strap and top handle.

The Milwaukee Hand Tools Low Profile Backpack is made from 1680D ballistic nylon and is ideal for tough jobsite conditions. The reinforced base protects the backpack from being damaged by abusive jobsite conditions. It has 22 pockets, including a padded electronic sleeve. The bag is fitted with rugged metal zippers and a padded, breathable load-bearing harness that evenly distributes the weight for increased comfort. There is also an adjustable chest strap and attachment strap for rolling bags.