The Faithfull FAIGW20025WG is a 200mm x 25mm vitrified grinding wheel suitable for use on most types of bench grinders. The general purpose grinding wheel can also be used for normal grinding of ferrous metals. The Faithfull FAIGW20025WG is supplied with bore reducing bushes and will fit bench grinders with the following shaft sizes:31.75mm19.05mm15.88mm12.77mm

Wheel Size: 200mm x 25mm x 31.75mmGrit: 46Bond Hardness: PM/S: 35Max R.P.M: 3,350

Wheel Size: 200mm x 25mm x 31.75mmGrit: 36Bond Hardness: MM/S: 35Max R.P.M: 3,350

Wheel Size: 200mm x 20mm x 31.75mmGrit: 46Bond Hardness: PM/S: 35Max R.P.M: 3,350

This Grinding Wheel has the following specification:Type: Green Grit (Medium)Size: 200 x 20mm

Wheel Size: 200mm x 20mm x 31.75mmGrit: 60Bond Hardness: NM/S: 35Max R.P.M: 3,350

Wheel Size: 200mm x 20mm x 31.75mmGrit: 36Bond Hardness: MM/S: 35Max R.P.M: 3,350

The Faithfull FAIGW15020WG is a 150mm x 20mm wheel and is supplied with bore reducing bushes and will fit bench grinders with the following shaft sizes:31.75mm19.05mm15.88mm12.77mm

Wheel Size: 150mm x 20mm x 31.75mmGrit: 46Bond Hardness: PM/S: 35Max R.P.M: 4,500

This Grinding Wheel has the following specification:Type: Green Grit (Medium)Size: 150 x 20mm

Wheel Size: 150mm x 20mm x 31.75mmGrit: 60Bond Hardness: NM/S: 35Max R.P.M: 4,500

Wheel Size: 150mm x 20mm x 31.75mmGrit: 36Bond Hardness: MM/S: 35Max R.P.M: 4,500

Wheel Size: 150mm x 16mm x 19.05mmGrit: 46Bond Hardness: PM/S: 35Max R.P.M: 4,500

This Grinding Wheel has the following specification:Type: Green Grit (Medium)Size: 150 x 16mm

The Faithfull Flexible Drive Shaft will fit directly into the chuck of any cordless or electric power drill. The reinforced ends and anti-kink design prevents wear and helps provide a long working life. A 6mm (1/4in) capacity keyless chuck makes changing bits easy and the plastic hand grip provides a firm hold making the shaft easy to guide when in use. Using a flexible drive enables you to take your power tool to the most inaccessible places. It may be used with drill bits, wire brushes, countersinks, flap wheels, mounted stones and grinding wheels. Length: 1.1m (43in)

The Faithfull Diamond Wheel Dresser has a high-quality T-bar with a multi-point, large 36G diamond surface. Ideal for obtaining a true flat surface on your grinding wheels. The knurled metal handle gives a positive grip when in use Specification: Face Size: 45 x 12mmLength: 115mm

Tip: 0.50 Carat Diamond.Suitable for bench grinding wheels of 150mm to 250 mm diameter.

Tip: 0.25 Carat Diamond.Suitable for bench grinding wheels of up to 150mm diameter.

This Faithfull SDS Plus Chuck Adaptor allows drill chucks to be used with SDS and SDS Plus machines. It converts SDS to 1/2in - 20UNF. Please note: Drill MUST NOT be used in hammer mode when using this adaptor.

The Faithfull right angle drill attachment may be used with either a cordless or electric powered drill when drilling or screwdriving where access is restricted. Ideal for use in between joists when running cables or pipe work or for working inside confined spaces such as kitchen cabinets. The drive is fitted with a ball bearing shaft support for a long working life and a 10mm (3/8in) keyless chuck for ease of use. Attaches into any 10mm (3/8in) and larger electric or air drill chuck. Overall dimensionsL150mm x D100m x W60mm

The Faithfull SDS Max to SDS Plus Adaptor, with a 225mm overall length, enables the use of all SDS-plus shanked drill accessories with an SDS-Max machine. Specification: Overall Length: 225mm.

The Faithfull 4 Way Chuck Key is a convenient four armed chuck key suitable for use on many electric or cordless drills and bench mounted power tools that are fitted with a keyed chuck of 10 or 13mm capacity. 1 x Key Size: 10 gear teeth, pilot hole 5.2mm.1 x Key Size: 10 gear teeth, pilot hole 6.8mm.2 x Key Size: 11 gear teeth, pilot hole 5.8mm.

Keyless chuck for use on mains powered, cordless drills and drill drivers. Quick and easy to use these chucks can be operated by hand for fast bit changes. Capacity 0.8 -10mm3/8in x 24 UNF threadSuitable for use on rotary drills and drill drives.

3/8in x 24 UNF thread. Capacity 10mmComplete with chuck key.

Keyless chuck for use on mains powered, cordless drills and drill drivers. Quick and easy to use, this chuck can be operated by hand for fast bit changes. The all steel construction provides a long working life making this chuck ideal for use on professional hammer drills. The chuck also features a non-slip locking system for impact drilling and holesaw applications1/2in x 20 UNF thread.Heavy-duty all steel constructionJaw locking system for hammer use

The FAICHUCK12 comes complete with key and adaptor for use with SDS and SDS Plus machines.When used with SDS machines, the drill MUST NOT be used in hammer mode1/2in x 20 UNF thread. Capacity 13mmComplete with chuck key.

THE DEWALT DWS5100 Dual Port Ripping Fence has been designed to be used with the DCS577 XR FlexVolt High Torque Circular Saw. The fence has been constructed from lightweight durable aluminium. The 300mm rip capacity on the left side allows for common rip cuts such as stairs or risers. The 360mm rip capacity for the right allows for larger maximum width rips. The markings have been laser etched for more accurate and precise readings. The fence can fold down for easy storage.

1 x DEWALT DWS5031 Router Attachment for use with DEWALT guide rails.

1 x DEWALT DWS5030 Replacement Teflon Strip for Plunge Saw

1 x DEWALT DWS5029 Plunge Saw Replacement Edge Strip for DWS Plunge Saws.

2 x DEWALT DWS5026 Plunge Saw Clamp for use with DEWALT guide rails.

1 x DEWALT DWS5025 Plunge Saw Guide Rail Bag for use with 1 and 1.5m DEWALT guide rails.

DEWALT DWS5023 Plunge Saw Guide Rail 2.6m.

DEWALT DWS5022 Plunge Saw Guide Rail 1.5m.

DEWALT DWS5021 Plunge Saw Guide Rail 1m.

The DEWALT DWE74912 Scissor Leg Stand is for use with the DWE7491 table saw. It enables easy transportation, and then set up on the actual jobsite.Specification: Weight: 6.8kg. (15lbs).

The DEWALT Surface Grinding Shroud allows the collection of harmfull dust during surface grinding applications. It attaches directly to 115mm or 125mm DEWALT Grinders with a keyless clamp. The shroud's sliding section allows access to corners and surfacing to edges. It is AIRLOCK compatable for a quick, locking attachment to a vacuum hose.

The DEWALT Impact Torsion Screwdriving Set features CNC precisely machined bits with a torsion zone to absorb peaks in torque. The set allows optimum bit flex for maximum life in Impact/High Torque applications.The 15 piece set has a longer life, faster, more accurate screw driving thanks to a specially designed bit tip which optimises the fit into the fastener and eliminates wobble and stripped screws.Preferred by professional users for maximum hold, tight access, and no run out.Supplied in a Magnetic Tough Case. Contains:3 x 25mm Phillips Bits: PH1, PH2, PH3.4 x 25mm Pozidriv Bits: PZ1, PZ2(2), PZ3.2 x 25mm TORX Bits: T20, T25.2 x 50mm Phillips Bits: PH2, PH3.3 x Socket Drivers: 7mm, 8mm, 10mm.1 x Magnetic Bit Tip Holder.

The DEWALT DT71700 Rapid Load Drill Driver Set contains a selection of bits suitable for both drilling and screwdriving applications. Supplied in a hard plastic carry case with clasp. Contains the following: 16 x 25mm Screwdriving Bits: PH2(2), PZ2(5), PZ3(2), Flat SL6, T10, T15, T20, T25(2) T30 4 x 50mm Screwdriving Bits: PH2, PZ1, PZ3 T15 4 x Drilling HSS-G diameters: 3, 4, 5 6mm1 x Nut Driver 10mm1 x Magnetic Bracket (Leash) Adaptor1 x Rapid Load Bit Holder

The DEWALT DT71517T-QZ Right Angle Torsion Drill Attachment is durable and has a compact design that allows it to fit in tight spaces where work is difficult to perform and is perfect for driving screws and drilling holes at awkward angles. It is ideal for cordless drills and accepts standard 1/4in hex shank accessories. Torsion bits have a Flexible Torsion Zone that absorbs torque peaks and reduces breakage. Includes the following: 3 x 25mm Pozidriv Bits: PZ2.2 x 25mm Phillips Bits: PH2.4 x 25mm Torx Bits: T10, T15, T20 T25.

The DEWALT DT70761 Mixed Drill Bit Set is supplied in a TOUGH CASE, this is part of a connectable case system that is TSTAK™ compatible. Individual TOUGH CASES can be clipped together for easy transportation. Contains: 7 x Extreme Bits: 4 x 75, 5 x 85, 6 x 100(x2), 7 x 100, 8 x 120mm(x2) 21 x HSS-G Drill Bits: 1, 1.5, 2, 2.5, 3, 3.2, 3.3, 3.5, 4, 4.2, 4.5, 4.8, 5, 5.5, 6, 6.5, 7, 7.5, 8, 10, 12mm 5 x 25mm Phillips Bits: PH1, PH2(x3), PH35 x 25mm Pozidriv Bits: PZ1, PZ2(x3), PZ329 x 25mm TORX Bits: T15, T20(x22), T25(x4), T30, T40 1 x 50mm Phillips Bit: PH21 x 50mm Pozidriv Bit: PZ21 x 50mm TORX Bit: T20 1 x Magnetic Bit Holder1 x Magnetic Drive Guide

The DEWALT DT70760 Mixed Drill Bit Set is supplied in a TOUGH CASE, this is part of a connectable case system that is TSTAK™ compatible. Individual TOUGH CASES can be clipped together for easy transportation. Contains: 7 x Extreme Masonry Drill Bits: 4 x 75, 5 x 85, 6 x 100(x2), 7 x 100, 8 x 120mm(x2) 12 x Extreme 2 HSS-G Drill Bits: 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7mm 5 x SDS Plus Extreme 2 Masonry Drill Bits: 6 x 110, 6 x 160(x2), 8 x 160, 10 x 160mm 5 x 25mm Phillips Bits: PH1, PH2(x3), PH35 x 25mm Pozidriv Bits: PZ1, PZ2(x3), PZ329 x 25mm TORX Bits: TX15, TX20(x22), TX25(x4), TX30, TX40 1 x 50mm Phillips Bit: PH21 x 50mm Pozidriv Bit: PZ21 x 50mm TORX Bit: TX20 1 x Magnetic Bit Holder1 x Magnetic Drive Guide

The DEWALT DT70759 Mixed Drill Bit Set is supplied in a TOUGH CASE, this is part of a connectable case system that is TSTAK™ compatible. Individual TOUGH CASES can be clipped together for easy transportation. Contains: 7 x Extreme Masonry Drill Bits: 4 x 75, 5 x 85, 6 x 100(x2), 7 x 100, 8 x 120mm(x2) 12 x Extreme 2 HSS-G Drill Bits: 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7mm 5 x 25mm Phillips Bits: PH1, PH2(x3), PH325 x 25mm Pozidriv Bits: PZ1, PZ2(x23), PZ39 x 25mm TORX Bits: TX15, TX20(x3), TX25(x3), TX30, TX40 1 x 50mm Phillips Bit: PH21 x 50mm Pozidriv Bit: PZ21 x 50mm TORX Bit: TX20 1 x Magnetic Bit Holder1 x Magnetic Drive Guide

The DEWALT DT70758 Mixed Drill Bit Set is supplied in a TOUGH CASE, this is part of a connectable case system that is TSTAK™ compatible. Individual TOUGH CASES can be clipped together for easy transportation. Contains: 7 x Brad Point Bits: 3, 4, 5, 6, 8, 10, 12mm 6 x Extreme Flat Bits: 12, 14, 16, 20, 22, 25mm 5 x 25mm Phillips Bits: PH1, PH2(x3), PH35 x 25mm Pozidriv Bits: PZ1, PZ2(x3), PZ329 x 25mm TORX Bits: TX15, TX20(x22), TX25(x4), TX30, TX40 1 x 50mm Phillips Bit: PH21 x 50mm Pozidriv Bit: PZ21 x 50mm TORX Bit: TX20 1 x Magnetic Bit Holder1 x Magnetic Drive Guide

The DEWALT DT70757 Mixed Drill Bit Set is supplied in a TOUGH CASE, this is part of a connectable case system that is TSTAK™ compatible. Individual TOUGH CASES can be clipped together for easy transportation. Contains: 7 x HSS-G Extreme Drill Bits: 3, 4, 5, 6, 8, 10, 12mm 2 x Flat Bits: 14, 20mm 4 x 25mm Phillips Bits: PH1(x2), PH2(x2)27 x 25mm Pozidriv Bits: PZ2(x25), PZ3(x2) 10 x 25mm TORX Bits: TX10(x3), TX20(x3), TX25(x2), TX30(x2)2 x 25mm Slotted Bits: 6, 8mm 1 x Nut Driver: 8mm 2 x Adaptors: 1/4in Hex to 1/4in Square, 1/4in to 3/8in

The DEWALT DT70756 Mixed Drill Bit Set is supplied in a TOUGH CASE, this is part of a connectable case system that is TSTAK™ compatible. Individual TOUGH CASES can be clipped together for easy transportation. Contains: 21 x Extreme Metal Drill Bits: 1, 1.5, 2, 2.5, 3, 3.2, 3.3, 3.5, 4, 4.2, 4.5, 4.8, 5, 5.5, 6, 6.5, 7, 7.5, 8, 10, 12mm 3 x 25mm Phillips Bits: PH1, PH2, PH34 x 25mm Pozidriv Bits: PZ1, PZ2(x2), PZ32 x 25mm TORX Bits: TX20, TX25 1 x 50mm Pozidriv Bit: PZ2 2 x 89mm TORX Bits: TX20, TX25 1 x Magnetic Screw Guide1 x Magnetic Bit Holder

The DEWALT DT70754 Mixed Drill Bit Set is supplied in a TOUGH CASE, this is part of a connectable case system that is TSTAK™ compatible. Individual TOUGH CASES can be clipped together for easy transportation. Contains: 5 x SDS Plus Drill Bits: 5mm, 6mm, 6.5mm, 7mm, 8mm 7 x Masonry Drill Bits: 4mm, 5mm, 6mm(x2), 7mm, 8mm(x2) 3 x 25mm Phillips Bits: PH1, PH2, PH3 4 x 25mm Pozidriv Bits: PZ1, PZ2(x2), PZ3

This DEWALT Keyless Chuck is a professional, heavy-duty chuck with carbide jaws for extra grip. It is suitable for DEWALT and other makes of drills. Capacity: 13mm.Fitment: 1/2 inch x 20UNF.

The DEWALT SDS-Plus 1/2in x 20 UNF chuck adaptor. This adaptor is for connecting a standard 1/2in x 20 UNF chuck into an SDS drill.It comes with screwdriver bit. Specification: Weight: 60g.

The DEWALT DT7021QZ Chuck Key has a universal design with a clamping range of 10-13mm.

The DEWALT DEWDT7012QZ keyed chuck can be used for corded and cordless drills and has the following specifications:Chuck capacity: 13mm.Fitment: 1/2 inch x 20 unf.

The DEWALT twin plastic sleeved keyless chuck can be used with both corded and cordless drills with the following specifications: Fitment: 1/2 inch x 20 UNF.Chuck Capacity: 13mm.

The DEWALT DE7778 Dust Extraction Kit, with a 35mm connection port, is suitable for the following DEWALT Mitre Saws: DW700,DW701,DW707 and DW709.The Kit helps keep your workspace both dust free and clean. The DE7778 kit includes: 3 x Hoses, 1 x 3-Way Adaptor, 3 x Attachments, 3 x Hose Collars and 1 x Blanking Piece.

This DEWALT Scissor Legstand is compatible with the DCS7485 XR FlexVolt Cordless Table Saw (DEWDCS7485T2).

The DEWALT DE7400-XJ Rolling Table Saw Stand is fitted with large heavy-duty wheels designed to easily roll over steps, kerbs, and jobsite debris. The folding legs are fitted with quick release levers which retract under the stand in a few seconds for easy and quick transport.The stand is made from lightweight aluminium, which improves the portability.The heavy-duty kick stand allows it to balance upright for mobility and storage, and there is also a retractable soft grip handle that slides out, allowing the user to pull the saw behind him comfortably.The design allows portability when the table saw is attached to the stand, increasing productivity. Perfect for correct height and stability, for all applications, as well as ripping skirting, sheet material and roofing timbers on site.Supplied with universal brackets which attach to most table saws.

The DEWALT DE7260 Mitre Saw Folding Rolling Stand has an easily adjustable mounting system that simplifies tool attachment and ensures universal compatibility. It has 2 height settings and is fitted with wide supports that extend up to 2.4m, with a capacity up to 135kg, providing excellent material support. The stand is fitted with pneumatic assists for easy set up and collapse, XL rubber wheels for improved jobsite mobility and no punctures and a kickstand for vertical storage. This compact vertical storage option provides improved mobility and ease of transport. Specification: Max. Load: 135kgMax. Extension: 2.4m

This DEWALT Dust Bag suits DEWALT DW704/705 mitre saws. The bag is ideal for keeping the workspace free of dust and chippings.Specification: Weight: 74g. (2.61oz).

DEWALT DE7033 Heavy-Duty Short Beam Leg Stand accommodates all DEWALT mitre saws. It has a lightweight aluminium construction that provides portability in and around the jobsite (only 14kg), the 1.1 metre beam extends to support up to 2.5 metres for use with large workpieces and the beam can support up to 227kg. Work stops can be converted into end stops for repetitive cutting to length. Integral folding legs avoid unnecessary assembly and the integrated carry handle provides ease of transportation. Applications include: cutting to length, roofing timbers, all material support requirements, and large workpiece support.Comes with: 2 x work stops / support and mitre saw brackets.

The DEWALT DE7030 Extra Long 550mm Mounting Bracket, pair, allows quick connection of mitre saws to the mitre stand. For use with the DE7023 stand. Specification: Weight: 2.22kg. (4.89 lb).

DEWALT DE7029 Increased Width Support For DE7023

DEWALT DE7028 Extension Support Arm For DE7023

DEWALT DE7027 Roller Support For DE7023

DEWALT DE7025 Mounting Brackets 2 For DE7023

DEWALT DE7024 Work Support Stop For DE7023.

The DEWALT Universal DE7023 Leg Stand is an extendable unit and, from its 1.9m base unit, two telescopic extensions expand the working area up to 3.9m in length, which will support work pieces over 5 metres in length. The leg stand has a unique bracket mounting system that takes all DEWALT and most competitive mitre saws. These brackets are also available separately meaning that one mitre saw station can be used in conjunction with a variety of machines. These brackets can also even be used with a board to create a large surface for supporting work. The Mitre saw station also features quick release spring-loaded retractable legs, to create a secure working platform on the work site. A convenient carry handle on the underside of the stand provides easy, balanced single-handed transportation of the stand. Transportation is aided yet further by a shoulder carry strap, which is also available. With the lightweight construction of the leg stand and its compact self contained parts, this is the first mitre saw system that provides the user with a truly portable yet versatile and stable mitre saw workstation for site. Comes with: 2 x work stops / support and mitre saw brackets. Fits the following saws: DW777, DW712, DW717, DW718, DW780. Height: 820mm. Closed Length: 1.7m. Open Length: 3.9m. Max. Loading: 227kg. Weight: 19.8kg.

1 x DEWALT DE6292 Guide Rail Joining Kit for use with DEWALT guide rails.

The DEWALT DE1000 Universal Stand supports all DEWALT and competitor mitre saws, as well as bench/portable thicknessers.The DE1000 stand has a lightweight design for easy transportation on and off site, and has a replaceable wood table top support for tool mounting. Specification: Size: 640 x 705mm. (25.2 x 27.8in).

The DEWALT DCE5601 Replacement Silicon Gun Cartridge for use with DCE580 XR Caulk Gun. Specification: Capacity: 300ml

1 x DEWALT DCB500L FlexVolt Mitre Saw Adaptor Cable 110 Volt Version

1 x DEWALT DCB500 FlexVolt Mitre Saw Adaptor Cable 240 Volt Version.

Fitted with High-Speed Steel drill bits to cover the full range of screw sizes and are self clearing.

Pilot drill for Rotabroach™ Raptor Cutters with 25mm cutting depth. Suits Sizes: 13-52mm.

This Rotabroach™ HSS Raptor Cutter has the following specification: Diameter: 20mmCutting Depth: 25mm

This Rotabroach™ HSS Raptor Cutter has the following specification: Diameter: 18mmCutting Depth: 25mm

This Rotabroach™ HSS Raptor Cutter has the following specification: Diameter: 16mmCutting Depth: 25mm

Replacement cutter to fit Faithfull wheel dresser (FAI WDO) Supplied as 4 x Packs of 4 (16 in Total).

The Faithfull Wheel Dresser has been designed for dressing, truing, sharpening and removing glaze from solid abrasive grinding wheels. Heat treated body with powder coated finish. Cast iron handle ergonomically designed for a comfortable grip. Cutters have star shaped teeth that expose new grains and thus provide a fresh surface on the wheels. Suitable for wheels up to 20in

This Grinding Wheel has the following specification:Type: Green Grit (Medium)Size: 200 x 25mm

Wheel Size: 200mm x 25mm x 31.75mmGrit: 60Bond Hardness: NM/S: 35Max R.P.M: 3,350

Senco Straight Brad Nails Galvanised. Size: 16G x 63mm.

Senco Straight Brad Nails Galvanised. Size: 16G x 55mm.

Senco Straight Brad Nails Galvanised. Size: 16G x 50mm.

Senco Straight Brad Nails Galvanised. Size: 16G x 45mm.

Senco Straight Brad Nails Galvanised. Size: 16G x 38mm.

Senco Straight Brad Nails Galvanised. Size: 16G x 32mm.

Senco Straight Brad Nails Galvanised. Size: 16G x 25mm.

Senco Chisel Smooth Brad Nails Galvanised Size: 15G x 64mm.

Senco Chisel Smooth Brad Nails Galvanised Size: 15G x 55mm.

Senco Chisel Smooth Brad Nails Galvanised Size: 15G x 50mm.

Senco Chisel Smooth Brad Nails Galvanised Size: 15G x 44mm.

Senco Chisel Smooth Brad Nails Galvanised Size: 15G x 38mm.

Senco Chisel Smooth Brad Nails Galvanised Size: 15G x 32mm.

Senco DuraSpin Collated Screws Flooring/Wood. Size: SQ2 4.5 x 60mm.

Senco DuraSpin Collated Decking Screws with Weatherex coating. Size: 4.5 x 75mm.

Senco DuraSpin Collated Screws Flooring/Wood. Size: SQ2 4.5 x 65mm.

Senco DuraSpin Collated Decking Screws with Weatherex coating. Size: 4.5 x 65mm

Senco DuraSpin Collated Screws Flooring/Wood. Size: SQ2 4.5 x 75mm.

Senco DuraSpin Collated Screws for Drywall to Wood. Size: 4.5 x 75mm.

Senco DuraSpin Collated Screws Flooring/Wood. Small flat head, diamond point, hi-low thread. Size: PH2 HLT 4.2 x 55mm.

Senco DuraSpin Collated Screws Flooring/Wood. Flat head, cut point to avoid wood splitting, coarse thread. Size: PH2 CT 4.2 x 55mm.