The Knipex KPX 87 02 250 Cobra Water Pump Pliers have automatic adjustment. They can be opened and adjusted directly at the workpiece with one hand. The Cobra pliers close with a push of a button and offer a good strong grip on the workpiece. The integrated spring of the automatic adjustment is shielded in the handles for user safety and the gripping surfaces have special hardened teeth which are hardened to approx. 61 HRC. These Knipex 87 02 250 pliers combine low wear with a secure gripping action. With fine adjustment, that ensures optimum adjustment to differently sized workpieces, user-friendly handle position and a secure catching of the hinge bolt, ensures no unintentional shifting when in use. The box-joint design is high in stability and, because of the double guide, will hold nuts or bolts securely without slipping on the workpiece. This means the minimum hand force is required. These Knipex water pump pliers have a user friendly guard to prevent the operator's fingers from being pinched. The pliers are made from strong chrome vanadium electric steel that has been forged and then oil-hardened for added strength and durability, and have PVC dipped handles for user comfort and a positive grip. Length: 250mm (10 in).Adjustment positions: 11.

Knipex Cobra Water Pump Pliers PVC Grip 115mm Capacity 560mm

Knipex 87 01 400 Cobra Water Pump Pliers PVC Grip 400mm;

Knipex 87 01 300 Cobra Water Pump Pliers PVC Grip 300mm

Knipex 87 01 250 Cobra Water Pump Pliers PVC Grip 250mm

1 x Knipex Cobra Mini Water Pump Pliers PVC Grip 125mm

The Knipex 86 06 Series Pliers Wrench is fitted with multi-component grips, VDE tested up to 10,000V and safe for work up to 1,000V. They conform to DIN EN / IEC 60900. Combines a set of pliers and a wrench into a single tool. Also excellent for gripping, holding, pressing and bending workpieces. Lever transmission is greater than 10:1, for a strong gripping power. Made from forged, vanadium electric steel, multi stage oil-hardened with a chrome plated finish. Zero backlash jaw pressure prevents damage to edges of sensitive and soft nuts (Cu). With a scale for presetting the opening width apart from the workpiece. Parallel jaws provide more grip; its design allows flexible adjustment of all widths up to the specified maximum size. The ratchet type principle allows quick and easy tightening and release of all bolted connections. No unintentional shift of the gripping jaws and no slipping of the joint.

These Knipex Multi-Component Grip Wrench Pliers have the following specification: Length 250mm (10in)Capacity 52mm, 19 Adjustments

These Knipex Multi-Component Grip Wrench Pliers have the following specification: Length 180mm (7in)Capacity: 40mm, 15 Adjustments

These Knipex Multi-Component Grip Wrench Pliers have the following specification: Length: 150mm (6in)Capacity: 27mm, 14 Adjustments

The Knipex Pliers Wrench XL acts as pliers and a wrench in a single tool. This unique installation tool is suitable for opening widths up to 85mm (3.3/8in). It acts as an adjustable tightening tool and is ideal for large screw joints, with pressure-sensitive surfaces such as plastic, copper, brass, stainless steel and chrome. It is also excellent for gripping, holding, pressing and bending workpieces. It has smooth jaws, for damage free installation of quality union joints made from brass, red brass or stainless steel. The zero backlash jaw pressure prevents damage to edges of sensitive components. The tool allows adjustment at the touch of a button directly on the workpiece, The parallel jaws give a more solid grip. The construction gives infinite adjustment of all widths up to the specified maximum size. The pliers wrench ensures reliable catching of the hinge bolt with no unintentional shifting. The action of the jaws allows quick tightening and release of bolted connections using the ratchet principle. It has a lever transmission greater than 10:1 for strong gripping power. The pliers wrench is made from chrome vanadium electric steel, which is forged and oil-hardened. It conforms to DIN ISO 5743. Open-end wrenches with fixed opening widths are expensive, especially when used for large union joints. The KNIPEX Pliers Wrench XL, with its adjustable jaw offers enormous savings potential. Specifications: Capacity: 85mm (3.3/8in).Length: 400mm.Adjustment positions: 25.

This Knipex Pliers Wrench has the following specification: Length 300mm (12in)Capacity 68mm (2.1/2in)

The Knipex 86 03 150 Mini Plier Wrench is ideal for precision mechanics, particularly suitable for working on small bolted connections. Their mini size makes them very good in very confined areas. They are made from Chrome vanadium, forged, oil-hardened electric steel. Lever transmission is greater than 10 : 1 for strong gripping power. Combines pliers and a wrench in a single tool and replaces the need for sets of metric and imperial spanners. Fitted with smooth jaws for damage free installation of plated fittings, allowing you to work directly on chrome. Reliable catching of the hinge bolt: no unintentional shifting. The ratchet type principle allows quick and easy tightening and release of all bolted connections. It is an adjustable tightening tool that is also excellent for gripping, holding, pressing and bending work pieces. The zero backlash jaw pressure prevents damage to edges of sensitive components. It has parallel jaws that give a more solid grip. Its design allows flexible adjustment of all widths up to the specified maximum size. Specification: Length: 150mmCapacity: 27mm

The Knipex 86 03 125 Mini Plier Wrench is ideal for precision mechanics, particularly suitable for working on small bolted connections. Thier mini size makes them very good in very confined areas. They are made from Chrome vanadium, forged, oil-hardened electric steel. Lever transmission is greater than 10 : 1 for strong gripping power. Combines pliers and a wrench in a single tool and replaces the need for sets of metric and imperial spanners. Fitted with smooth jaws for damage free installation of plated fittings, allowing you to work directly on chrome. Reliable catching of the hinge bolt: no unintentional shifting. The ratchet type principle allows quick and easy tightening and release of all bolted connections. It is an adjustable tightening tool that is also excellent for gripping, holding, pressing and bending workpieces. The zero backlash jaw pressure prevents damage to edges of sensitive components. It has parallel jaws that give a more solid grip. Its design allows flexible adjustment of all widths up to the specified maximum size. Specification: Length: 125mmCapacity: 23mm (7/8in)

The Knipex 86 Series Pliers Wrench with a grey atramentized finish and dipped PVC handles. Smooth jaws for damage free installation of plated fittings, ideal when working directly on chrome. With scaling for presetting the width apart from the workpiece. Highly suitable for gripping, holding, pressing and bending workpieces. Fast adjustment at the touch of a button with the tool on the workpiece. Lever ratio greater than 10-1 for strong gripping power. Replaces the need for sets of metric and imperial spanners. Specification: Length: 250mm (10in)Capacity: 52mm (2in)

The Knipex 85 51 250 C Spring Hose Clamp Pliers are made from Chrome Vanadium, forged, oil-hardened electric steel and have been specially designed to open and close click clamps. The rotating jaw inserts allow for the safe actuation of clamps in any position and the pliers have good leverage which allows clamps to be opened and closed again comfortably and easily without a great deal of effort. They have a slim head design; narrow head width and rotating grip inserts make this an ideal tool, especially in confined areas. Ideal for easy working on fuel hoses, vacuum pipes and suction nozzles and many other applications. It has an additional function, it is able to detach hoses gently using the serrated jaw. Specification Length: 250mm.Weight: 340g.

The Knipex 85 51 250 AF Spring Hose Clamp Pliers have a locking device that enables simple and secure work on clamps under tension without effort and has a one-hand release.

The Knipex 85 51 250 A Spring Hose Clamp Pliers feature a quick-set adjustment that adjusts by shifting directly onto the workpiece.

Knipex concentrate their knowledge and expertise on pliers, wrenches and cutters. This is the only way to justify there claim they are the best supplier in terms of quality, innovation and efficiency. Knipex products satisfy the highest expectations in terms of performance, ergonomics and service life. There products are designed to meet the requirements of professional users, who must be able to rely on their tools in day-to-day work. Particular attention is paid to ergonomic criteria in the production of their pliers and cutters, above all in the form of effort-reducing constructions and a handle design which is ideally suited to the moving hand and ensures minimum fatigue and safe work. The Knipex KPX8501250 Water Pump pliers have automatic adjustment to the workpiece simply by squeeezing the handles for the perfect grip and fit. You can use these Knipex Water Pump pliers one handed. Manufactured from high quality chrome vanadium electric steel, making these pliers very strong and durable. Fitted with PVC dipped handles for a better grip and comfort. Length: 250 mm - 10-inchCapacity pipes: 32mmCapacity nuts: 36mm

Knipex 81 13 250 SB Plastic Pipe Grip Pliers Plastic Jaws have a chrome finish.

Knipex 81 11 250 SB Plastic Pipe Grip Pliers Plastic Jaws have a black atramentized finish.

Knipex 81 03 250 SB Plastic Pipe Grip Pliers have a Chrome finish.

Knipex Series 79 ESD Precision Electronics Side Cuttersare fitted with electrically discharging handles (dissipative). They provide an optimised flush cutting result in soft materials and are perfect for installations with tight tolerances and for precise configuration of wire ends. These pliers are 20% lighter than conventional electronics pliers and are fitted with ergonomically optimised multi-component handles. The extremely precise ground and sharp cutting edges are perfect for exact cutting on delicate electronic components and the cutting edges have been additionally induction hardened to approx. 64 HRC. Cutting blades are made of high-quality ball bearing steel with a polished finish and have been processed with the highest degree of care. They have a bolted joint that has carefully manufactured joint surfaces for even, low-friction movement throughout the entire opening range. Each opening movement is gentle and even without backlash, thanks to the smooth-running double spring. Each work step proceeds reliably and precisely. This makes work much easier for professionals. Specification: Cutting Capacity (mm): Soft Wire: 0.1-1.3Length: 125mmJaw Length: 11mmHead Width: 11mm

Specification: Length: 140mmCutting Capacity : Soft 0.2-2.1mm, Medium-Hard 1.4mm

Knipex 78 61 Series Electronic Super Knips for ultra fine cutting work, e. g. in electronics and fine mechanics. Also suitable for cutting fibre optic cable. With ground, very sharp cutting edges without bevel. The cutting edges have been additionally induction-hardened, cutting edge hardness approx. 62 HRC. Its precisely shaped tips cut wires close to a surface from 0.2mm. Made from special tool steel, oil hardened in multiple stages with a stainless steel rivet joint for extremely smooth movement for minimum operator fatigue. Controlled micro cutting edge misalignment allows for precise cutting of even the thinnest of wires and for a long service life. Fitted with ergonomic multi-component grips for added grip and comfort. Specification: Cutting Capacity (mm):Medium: 1.0, Soft: 0.2-1.6Length: 125mmJaw Length: 9mmHead Width: 13.5mm

These Knipex Electronic Super Knips have a lead catcher - no uncontrolled loss of cut wire ends. Specification: Cutting Capacity (mm): Medium: 1.0, Soft: 0.2-1.6Length: 125mmJaw Length: 9mmHead Width: 13.5mm

Knipex 78 03 Series Electronic Super Knips are fitted with electrically discharging handles (dissipative). Ground, very sharp cutting edges without bevel, cutting edge hardness approx. 54 HRC. The precisely shaped tips cut wires close to a surface from 0.2mm. Suitable for ultra fine cutting work, eg: in electronics and fine mechanics. Made from INOX tool steel with a stainless steel rivet joint for extremely smooth movement for minimum operator fatigue. Controlled micro cutting edge misalignment allows for precise cutting of even the thinnest of wires and for a long service life. Specification: Cutting Capacity (mm): Medium Hard: 1.0, Soft: 0.2-1.6Length: 125mmJaw Length: 9mmHead Width: 13.5mm

The Knipex 78 03 140 Electronic Super Knips are durable and stainless, made of INOX tool steel. With a cutting edge hardness of approx. 54 HRC. Specification: Length: 140mmCutting Capacity : Soft 0.2-2.1mm, Medium-Hard 1.2mmJaw Length: 12.3mmHead Width: 15.7mm

77 42 ESD: Pointed Non-Bevel Flush Cut Head, Medium: 0.80mm, Soft: 0.3-1.3mm.

Knipex 77 32 115 Electronic diagonal cutter with a pointed head and a small bevel, ideal for fine cutting work, in electronics and fine mechanics. Friction free box joint and return spring built into handle. The polish or mirror polish together with a fine film of oil offer effective rust protection - no circuit faults caused by peeling chrome from plated tools. 77 32 ESD: Pointed Bevel Head, Hard: 0.50mm, Medium: 1.0mm, Soft: 0.3-1.3mm.

Knipex Series 77 Electronic Diagonal Cutters with a round head, non-bevelled. Ideal for fine cutting work, e.g. in electronics and fine mechanics. Precision-ground cutting edges for flush cutting and low friction double spring for gentle smooth closing and opening. The cutting edges are separately induction hardened to approximately 62HRc. Made from ball bearing chrome steel, oil hardened with a polish/mirror polish finish, together with a fine film of oil to offer effective rust protection. No circuit faults caused by peeling chrome from plated tools. A stainless steel rivet joint provides extremely smooth movement for minimum operator fatigue. Fitted with ergonomic multi-component grips for added grip and comfort. Specification: Cutting Capacity (mm): Medium: 1.0, Soft: 0.2-1.3Length: 115mm

Knipex 77 12 Series Electronic Diagonal Cutters with a round head, bevel and lead catcher - no uncontrolled loss of cut wire ends. For fine cutting work, e.g. in electronics and fine mechanics. Made from ball bearing chrome steel, oil hardened. Additionally laser hardened, cutter hardness at least 60 HRC. With a polish/mirror polish finish, together with a fine film of oil to offer effective rust protection. No circuit faults caused by peeling chrome from plated tools. Fitted with ergonomic multi-component grips for added grip and comfort. Narrow sleeves pulled up to the head of the pliers enable the tool to be guided securely and comfortably, also between thumb and index finger. There is also a low-friction double spring for gentle and even opening. Specification: Cutting Capacity (mm): Hard: 0.6, Medium: 1.2, Soft: 0.2-1.6Length: 115mm

Knipex 77 02 115 ESD Electronic diagonal cutter with a round head and small bevel. Ideal for fine cutting work, in electronics and fine mechanics. Friction free box joint and return spring built into handle. The polish or mirror polish, together with a fine film of oil, offer effective rust protection - no circuit faults caused by peeling chrome from plated tools. ESD versions discharge the electrostatic energy correspondingly slowly and under control to protect endangered components. 77 02 ESD: Round Bevel Head, Hard: 0.60mm, Medium: 1.20mm, Soft: 0.3-1.6mm.

Knipex 75 02 Series Electronic Diagonal Cutters for ultra fine cutting work, e. g. in electronics and fine mechanics. With sharp, ground cutting edges. The cutting edges have been additionally induction-hardened, approx. 62 HRC. Made from high-grade special tool steel, forged, multi stage oil-hardened with a bolted joint for high precision and stress tolerance. There is also a low-friction double spring for gentle and even opening. Fitted with ergonomically PVC coated styled handles for added grip and comfort. Specification: Cutting Capacity (mm): Piano: 0.4, Hard: 0.6, Medium: 1.0, Soft: 0.2-1.3Length: 125mmJaw Length: 14mmHead Width: 10.5mm

74 91 Series High Leverage Centre Cutters with an integrated forged axle for heavy-duty use. Made from chrome vanadium heavy-duty steel, forged, multi stage oil-hardened. The precision cutting edges additionally induction-hardened (cutting edge hardness approx. 62 HRC), for all sorts of wire including piano wire. Fitted with ergonomically PVC coated styled handles for added grip and comfort. Cuts thick wires with less effort than other diagonal cutters of the same length. They offer high cutting performance with minimum effort due to optimum coordination of the cutting edge angle and transmission ratio. Specification: Length: 250mmCutting Capacity (mm): Piano: 3.5, Hard: 3.8, Medium: 5.0

These Knipex High Leverage Diagonal Cutters have an opening spring; to be activated if required. Specification: Length: 180mmCutting Capacity (mm): Piano: 2.2, Hard: 2.7, Medium: 3.8

1 x Knipex VDE High Leverage Diagonal Cutters 200mm Cutting Capacity: Medium: 4.2mm, Hard: 3.0mm, Piano: 2.5mm

1 x Knipex VDE High Leverage Diagonal Cutters 180mm Cutting Capacity: Medium: 3.8mm, Hard: 2.7mm, Piano: 2.2mm

1 x Knipex VDE High Leverage Diagonal Cutters 160mm Cutting Capacity: Medium: 3.4mm, Hard: 2.5mm, Piano: 2.0mm

These Knipex High Leverage Diagonal Cutters have the following specification: Length: 200mmCutting Capacity (mm): Piano: 2.2, Hard: 2.7, Medium: 3.8

These Knipex High Leverage Diagonal Cutters have the following specification: Length: 180mmCutting Capacity (mm): Piano: 2.2, Hard: 2.7, Medium: 3.8

These Knipex High Leverage Diagonal Cutters have the following specification: Length: 160mmCutting Capacity (mm): Piano: 2.0, Hard: 2.5, Medium: 3.4

These Knipex High Leverage Diagonal Cutters have the following specification: Length: 250mmCutting Capacity (mm): Piano: 3.0, Hard: 3.5, Medium: 4.6

These Knipex High Leverage Diagonal Cutters have the following specification: Length: 200mmCutting Capacity (mm): Piano: 2.5, Hard: 3.0, Medium: 4.2

These Knipex High Leverage Diagonal Cutters have the following specification: Length: 180mmCutting Capacity (mm): Piano: 2.2, Hard: 2.7, Medium: 3.8

These Knipex High Leverage Diagonal Cutters have the following specification: Length: 160mmCutting Capacity (mm): Piano: 2.0, Hard: 2.5, Medium: 3.4

Knipex 73 72 Series TwinForce Diagonal Cutters with patented double joint. Made from chrome vanadium electric steel, forged, multi stage oil-hardened. The cutting edges have been additionally induction-hardened, cutting edge hardness approx. 62 HRC. Reliably cuts all types of wire, including steel tape. Fitted with multi-component, soft grip handles that are lightweight and compact. It low cutting impact is gentle on hands, tension on muscles and tendons is relieved. Ideal for comfortable cutting, repetitive cutting or extremely hard cutting jobs. The design offers a highdegree of stability and zero-backlash due to precisely milled forged-in axles. Specification: Length: 180mmCutting Capacity (mm): Soft: 5.5, Medium Hard: 4.60, Hard: 3.20, Piano: 3.00

The Knipex 73 02 Series X-Cut Compact Diagonal Cutter requires 40% less force required compared with standard diagonal cutters of the same length. Made from chrome vanadium heavy-duty steel, forged, multi stage oil-hardened. Its box-joint design provides the highest stability whilst retaining low weight. Cuts finest strands as well as multi-core cables and piano wires. With a large opening width for thicker cables. Fitted with multi-component, soft grip handles that are lightweight and compact. They offer high cutting performance with minimum effort due to optimum coordination of the cutting edge angle and transmission ratio. Powerful, light and universal. Universally usable, in the assembly, maintenance and production. Specificiation: Length: 160mmCutting Capacity (mm): Soft Wire: 4.8, Medium Hard Wire: 3.8, Hard Wire: 2.7, Piano Wire: 2.2, Multi Stranded: 12

Knipex 72 01 Series Diagonal Cutters for nearly flush cutting of moulded plastic components from sprues.Made from vanadium electric steel, forged, oil-hardened. Fitted with ergonomically PVC coated styled handles for added grip and comfort. It has an improved transmission ratio for 25 % more cutting performance and fitted with an opening spring for ease of use. Cuts soft materials such as lead in a flush cut. Specification: Length: 160mmCutting Capacity: For soft materials only

The Knipex Concrete Mesh Cutters have blades made from chrome vanadium, forged, oil-hardened, heavy-duty steel and have robust cutting edges that are additionally induction hardened to approx. 62 HRC. The handles are constructed from powder-coated steel tube and fitted with sturdy non-slip two-colour dual component handle sleeves. The ergonomically angled handles minimise user effort and there is a forged-in stopper with comfortable shock-absorber for increased user comfort. The cutters offer a high cutting performance with minimum effort due to optimum co-ordination of the cutting edge angle and transmission ratio. Flat construction in the head and joint area provides increased access even in tight paces. An eccentric bolt provides precise adjustment of the cutter with 12 positions. A special, forged tool steel is used in the joints of the cutters and the bolted cutter head is replaceable. Specification Cutting Capacity: HRC 19: 11mm, HRC 40: 9mm and HRC 48: 6mm. Length: 950mm.Weight: 4.06kg.

The Knipex CoBolt compact bolt cutters give an exceptional cutting performance with minimum effort because of their effective lever action design. The lever action guarantees an extremely favourable lever ratio with low friction, and cutting performance is 30 times higher than the hand force applied (Requires 60% less effort). Cuts components like bolts, nails, rivets, etc. up to 6mm dia. The recess in the blade allows easier cutting of thicker wires, e. g. for anchor bolts in false ceilings. Specification: Length: 200mmCutting Capacity: Piano: 3.6mm, Hard: 4.0mm, Soft: 6.0mm

The Knipex 71 Series CoBolt Compact Bolt Cutters with 2 component, soft grip handles. Fitted with a return spring, these cutters have an exceptional cutting performance with minimum effort because of a very effective lever action design. The lever action guarantees an extremely favourable lever ratio with low friction, and cutting performance is 30 times higher than manual force due to special joint design. Cuts components like bolts, nails, rivets, etc. up to 6mm. 20 angled head with single-sided joint bar and diagonal cutting edge for flush cutting with space for gripping. Specifiation: Length: 200mmCutting Capacity: Piano: 3.6mm, Hard: 4.0mm, Soft: 6.0mm

This Knipex CoBolt Compact Bolt Cutter is fitted with ergonomic multi-component grips for added grip and comfort. Opening spring and locking device are integrated in the handles also for comfortable work and protected transport. Specification: Length: 200mmCutting Capacity: Soft Wire: 6.0mm, Medium-Hard Wire: 5.2mm, Hard Wire 4mm, Piano Wire: 3.6mm

This Knipex CoBolt Compact Bolt Cutter is fitted with ergonomic multi-component grips for added grip and comfort. Specification: Length: 200mmCutting Capacity: Soft Wire: 6.0mm, Medium-Hard Wire: 5.2mm, Hard Wire 4mm, Piano Wire: 3.6mm

This Knipex CoBolt Compact Bolt Cutter is fitted with ergonomically PVC coated styled handles for added grip and comfort. Specification: Length: 200mmCutting Capacity: Soft Wire: 6.0mm, Medium-Hard Wire: 5.2mm, Hard Wire 4mm, Piano Wire: 3.6mm

Knipex CoBolt S Compact Bolt Cutters are specially designed for small hands. Made from forged heavy-duty, chrome vanadium steel and oil-hardened multiple times. With precision cutting edges that have been induction hardened, approx. 64 HRC, ideal for cutting soft and hard wire as well as piano wire. Cuts components such as bolts, nails, rivets etc. up to 4.4mm. The efficient joint design ensures exceptional cutting performance with little effort. The microstructure on cutters keeps the material to be cut in a good insertion position for optimal use of the mechanics. There is also a gripping surface below the joint for gripping and pulling wires with a diameter from 1.0mm. Fitted with ergonomically PVC coated styled handles for added grip and comfort. Specification: Length: 160mmCutting Capacity : Soft Wire 5.3mm, Medium-Hard Wire 4.4mm, Hard Wire 3.2mm, Piano Wire 3mm

These Knipex VDE Diagonal Cutters have the following specification: Size: 180mmCutting Capacity: Hard: 2.5mm, Medium: 3.0mm, Soft: 4.0mm

These Knipex Diagonal Cutters have the following specification: Length: 180mmCutting Capacity (mm): Hard: 2.5, Medium: 3.0, Soft: 4.0

These Knipex Diagonal Cutters have the following specification: Length: 160mmCutting Capacity (mm):Hard: 1.8, Medium: 2.5, Soft: 4.0

These Knipex Diagonal Cutters have the following specification: Length: 140mmCutting Capacity (mm): Hard: 1.8, Medium: 2.5, Soft: 4.0

These Knipex Diagonal Cutters have the following specification: Length: 180mmCutting Capacity (mm): Hard: 2.5, Medium: 3.0, Soft: 4.0

These Knipex Diagonal Cutters have the following specification: Length: 160mmCutting Capacity (mm): Hard: 2.0, Medium: 2.8, Soft: 4.0

These Knipex Diagonal Cutters have the following specification: Length: 140mmCutting Capacity (mm): Hard: 1.8, Medium: 3.0, Soft: 4.0

These Knipex Diagonal Cutters have the following specification: Length: 125mmCutting Capacity (mm): Hard: 1.5, Medium: 2.3, Soft: 3.0

These Knipex End Cutting Nippers have the following specification: Length: 280mm (11in)Cutting Capacity: Hard: 3.2mm, Medium: 4.0mm, Soft: 4.5mm

These Knipex End Cutting Nippers are supplied LOOSE. Specification: Length: 200mmCutting Capacity: Hard: 2.8mm, Medium: 3.5mm, Soft: 4.0mm

These Knipex End Cutting Nippers have the following specification: Length: 200mm (8in)Cutting Capacity: Hard: 2.8mm, Medium: 3.5mm, Soft: 4.0mm

These Knipex End Cutting Nippers have the following specification: Length: 180mmCutting Capacity: Hard: 2.5mm, Medium: 3.2mm, Soft: 4.0mm

This Knipex High Leverage End Cutting Nippers have the following specification: Length: 200mmCutting Capacity : Soft 5mm, Medium-Hard 3.8mm, Hard 3mm, Piano Wire: 2.5mm

This Knipex High Leverage End Cutting Nippers have the following specification: Length: 160mmCutting Capacity : Soft 4.5mm, Medium-Hard 3.4mm, Hard 2.5mm, Piano Wire 2mm

This Knipex High Leverage End Cutting Nippers have the following specification: Length: 140mmCutting Capacity : Soft 4mm, Medium-Hard 3.1mm, Hard 2mm, Piano Wire 1.5mm

Length: 115mm.End oblique cutter, short head with small bevel 27 .

Length: 120mm.End diagonal cutter with small bevel - 15 .

The Knipex 61 01 200 have hardened blades, these are ideal for piano wire, for thick, and soft wire such as rivets, bolts with almost flush cutting of bolts, nails etc.These Knipex bolt end cutting nippers have high cutting capacity as result of optimal transmission of power applied.Cutting edges with additional inductive hardening and the edges have been hardened to approx. 64HRC. The Knipex KPX6101200 are made from the best sourced materials, vanadium electric steel that has been oil-hardened for added strength and durability. Length: 200mm (8 in)Polished headHandles PVC plastic coated.

Length 210mm (8 1/4 in).Shaft size: 40 -100 mm.

Length 165mm (6 1/2 in).Shaft size: 19 - 60 mm.

Length 130mm (5 1/4 in).Shaft size: 10 - 25 mm.

Length 130mm (5 1/4 in).Shaft size: 3 -10 mm.

Length 225mm (9 in).Shaft size: 40 - 100 mm.

Length 180mm (7 in).Shaft size: 19 - 60 mm.

Length: 140mm (5 1/2 in).Shaft size: 10 - 25 mm.

Length 140mm (5 1/2 in).Shaft size: 3 - 10 mm.

Length 210mm (8 1/4 in).Size of bore 40-100 mm.

Llength 165mm (6 1/2).Size of bore 19-60 mm.

Length 130mm (5 1/4 in).Size of bore 12-25 mm.

Length 130mm (5 1/4).Size of bore 8-13 mm.

Length 225mm (9 in).Bore size: 40 - 100 mm.

Length 180mm (7 in).Bore size: 19 - 60 mm.

Length 140mm (5 1/2 in).Bore size: 12 - 25 mm.

Length 140mm (5 1/2 in).Bore Size: 8 - 13 mm.

Size 310mmShaft size 85-140mm

Size 210mmShaft size 40-100mm

Size 185mmShaft size 19-60mm

Size 130mmShaft size 10-25mm

Size 130mmShaft size 3-10mm

Length 200 mm.Shaft size: 40 - 100 mm.

Length 170mm (6 3/4 in).Shaft size: 19 - 60mm.

Length 125mm (5 in)Shaft size 10 to 25mm.

Bore size: 40 - 100 mm.External Straight - length 210 mm.

Bore size: 19 - 60 mm. External Straight - length 180 mm.