Power Tool Accessories

46/95 x 1/4 TCT 90° Shank Mounted Template Profiler 12.7 x 25.4mm

A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing.Tooling Tungsten Carbide1/4 in Shank.Angle A = 90° D = 12.7 mmC = 25.4 mm

£ 58.70

46/91 x 1/4 TCT 90° Shank Mounted Template Profiler 12.7 x 9.5mm

A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing.Tooling Tungsten Carbide1/4 in Shank.Angle A = 90° D = 12.7 mmC = 9.5 mm

£ 53.53

46/90 x 1/4 TCT 90° Shank Mounted Template Profiler 15.9 x 25mm

A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing.Tooling Tungsten Carbide1/4 in Shank.Angle A = 90° D = 15.9 mmC = 25 mm

£ 78.11

46/82 x 1/2 TCT 90° Bearing Guided Triple Flute Cutter 12.7 x 38.1mm

This trimmer has twin bearings for stability by increasing the bearing surface. An industrial profiling tool for longer runs of work when a clean finish is needed. T.C.T.1/2in ShankA Angle = 90 .C = 38.1mm.D = 12.7mm.

£ 105.43

46/44 x 1/4 TCT Bearing Guided Rebater 24mm x 12.7mm

This Trend 46/44 Rebater includes different size bearings for a choice of rebates, they provide easy set up and, accurate, depth of cut.This set is ideal for rebating straight and shaped work pieces, particularly with delicate applications such as musical instrument production when a small rebate is required for insertion of purfling. Specifications: Tooling TCT.1/4in Shank. By changing the bearing, the size of the rebate can be altered, It is supplied with 3 bearings.22.0 mm bearing gives rebate of 1 mm.19 mm bearing gives rebate of 2.5 mm.16 mm bearing gives rebate of 4 mm.D = 24 mm.C = 12.7 mm.

£ 103.15

46/39 x 1/4 TCT Bearing Guided Rebate Set 35 x 12.7mm

1/4in Shank. By changing the bearing the size of the rebate can be altered.Supplied with four bearings.19 mm Bearing gives rebate of 7.9 mm16 mm Diameter gives rebate of 9.5 mm12.7 mm Diameter gives rebate of 11.1 mm9.5 mm Diameter gives rebate of 13.7 mmD = 35 mmC = 12.7 mm

£ 111.85

46/39 x 1/2 TCT Bearing Guided Rebate Set 35 x 12.7mm

1/2in Shank.By changing the bearing the size of the rebate can be altered.Supplied with 4 bearings.Use of :19 mm Bearing gives rebate of 7.9 mm.16 mm Bearing gives rebate of 9.5 mm.12.7 mm Bearing gives rebate of 11.1 mm.9.5 mm Bearing gives rebate of 12.7 mmD = 35 mmC = 12.7 mm

£ 120.50

46/390 x 1/2 TCT Bearing Guided Rebater 22.5mm x 50.8mm

This Trend 46/390x1/2TC Large Guided Rebater is bearing guided for straight curved work. It is for use with portable or stationary routers and is supplied as standard with ref: BR/191 fitted.There are a variety of bearing rings available to give various rebate sizes. These rings are secured between the two bearings. D: 50.8 mmC: 22.5 mmB: 12.7 mmE: 19.1 mmE: 15.9 mmOL: 78 mm Specifications: Shank Diameter: 1/2 inch.Shank length: 35 mm.

£ 140.13

46/09 x 1/2 TCT 90° Shank Mounted Template Profiler 19.1 x 50mm

A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Tooling Tungsten Carbide1/2 in Shank. Angle A = 90 D = 19.1 mmC = 50 mm

£ 104.18

3/83M x 1/2 TCT Two Flute Cutter 12.7 x 50mm

The Trend 3/83M x 1/2 TCT Two Flute Cutter has a short shank, suitable for Makita 3600B 3612BR, Ryobi and Hitachi routers. Ideal for cutting kitchen worktops. It has the following specification: Cutting Diameter: 12.7mmCutting Depth: 50.0mmOverall Length: 84mmShank Diameter: 1/2in

£ 59.93

3/83D x 1/2 TCT Two Flute Workshop Cutter 12.7 x 50mm

The Trend 3/83D x 1/2 TCT Two Flute Workshop Cutter is especially suited for drilling. It has the following specification: Cutting Diameter: 12.7mm (1/2in)Cutting Depth: 50.0mmOverall Length: 99mmShank Diameter: 1/2in

£ 59.93

3/83 x 1/2 TCT Two Flute Workshop Cutter 12.7 x 50mm

This Trend 3/83 x 1/2 TCT Two Flute Workshop Cutter has the following specification: D: 12.7mm (1/2in)C: 50mmOL: 108mmShank Diameter: 1/2in For use with professional routers that have a 80mm deep plunge. One piece multi-slit collet to ensure safe cutter retraction into base. Designed for hollow honeycomb board worktops.

£ 55.83

3/73D x 1/2 TCT Two Flute Workshop Cutter 12.0 x 50mm

The Trend 3/73D x 1/2 TCT Two Flute Workshop Cutter is especially suited for drilling. It has the following specification: Cutting Diameter: 12.0mm (15/32in)Cutting Depth: 50.0mmOverall Length: 109mmShank Diameter: 1/2in

£ 67.40

348 x 1/2 TCT Intumescent Cutter 15 x 40mm

This Trend Intumescent Strip Cutter 348 is for routing the groove for the intumescent strip in a frame or door.An Intumescent strip is used to create an effective barrier to both fire and smoke.Alternative bearings can be chosen to suit other thicknesses of intumescent strip. The Trend 348 x 1/2 TCT Intumescent Cutter has the following specifications: Diameter: 40mm.Cutting Depth: 15mm.Cutter Width: 4mm.Bearing: 32mm.Shank Length: 41mm.Overall Length: 70mm.Shank Diameter: 1/2in.Fire Check: 30 minutes.

£ 132.52

337 x 1/2 TCT Tongue & Groove Set 6.35mm x 10.0mm

This Trend 337 x 1/2 tc is a one-piece tongue and groove set. The parts are inter-changed on the Arbor to alter the set up. It has a maximum timber thickness 22 mm and Minimum timber thickness 15 mm. Instructions for use are supplied. TCT. 1/2in Shank. D: 41 mm.C: 6.35 mm.C2: 10 mm.E: 22 mm.OL: 76 mm.

£ 132.54

334 x 1/2 TCT Aquamac Recessor

This Trend 334 x 1/2 TCT Aquamac 21 Recessor, cutter, is designed for use with the seal in a wiping mode and comes complete with a guide bearing to reduce setting-up time and simplify machining operations. It is MEC mechanical feed only. Specifications: Size: 46.3mm diameter x 10.3mm cut shank 1/2in TCT. D: 46.3 mm.D2: 4.3 mm.C: 10.3 mm.C2: 2.7 mm.OL: 90 mm.B: 28.6 mm.

£ 149.08

3/2 x 1/4 TCT Two Flute Cutter 6.0 x 16mm

This Trend 3/2 x 1/4 TCT Two Flute Cutter produce a cleaner finish than the single flute cutters. This cutter is suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges.Corners will require a final trimming square with a hand chisel or a corner chisel. The Trend Two Flute Cutter is suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Specifications: Cut Diameter: 6.0mm (15/64in).Cut Depth: 16mm.Overall Length: 48mm.Shank Diameter: 1/4in.

£ 43.22

3/21 x 1/4 HSS Two Flute Cutter 6.3 x 28mm

Trend HSS Two Flute Straight Cutters are made from a single piece of High Speed Steel, ground with a very fine edge. Generally HSS cutters are slightly less expensive than their TC grades, but can be more suitable for certain applications. Suitable for general grooving and rebating. Suitable for non abrasive materials, but will give a superior finish in soft timbers. Specification D: 6.3mm (1/4in)C: 28mmOL: 59mmShank Diameter: 1/4in

£ 23.98

10H/1 x 1/4 TCT Pin Guided Chamfer / Bevel 45° 10 .0 x 14.0mm

These types of cutter are used for edging and chamfer cutting on man made fibre boards, natural timbers and plastics.Tools are offered to produce various angles for chamfering. Pin guarded cutters enable curved work to be undertaken, bearings running along the board edge or a template.Typical trade applications include sign making, freehand engraving, cabinet making and decorative joinery. T.C.T1/4in Shank.A = 45 C1 = 10 mmC2 = 14 mm

£ 70.69

10/11 x 1/2 TCT V-Groove Chamfer 45° 19.0 x 38mm

These type of cutters are used for edging, grooving, veining work and chamfer cutting on man made fibre boards, natural timbers and plastics. Tools are offered to produce various angles for engraving, chamfering and V-grooving. Typical trade applications include sign making, freehand engraving, cabinet making and decorative joinery. T.C.T.Shank 1/2in.A = 45 D = 38 mmC1 = 19 mmC2 = 26.5 mm

£ 84.73

The Howcroft Team

Fully Stocked MRO Inventory

If you need it, we stock it...

Howcroft Group - 2025 E-Brochure

Fully Stocked Chain Inventory

CSUK - 2024 E-Brochure

Power Tool Accessories

Don't see what you need?