1 x Faithfull Cloth Sanding Belt 610 x 100mm 40g

1 x Faithfull Cloth Sanding Belt 610 x 100mm 24g

1 x Faithfull Cloth Sanding Belt 610 x 100mm 120g

Pack of 3 Faithfull Cloth Sanding Belts 400mm x 60mm 80g

Pack of 3 Faithfull Cloth Sanding Belt 400 x 60mm 120g

Pack of 3 Faithfull Cloth Sanding Belt 400 x 60mm Coarse

1 x Faithfull Cloth Sanding Belt 560 x 100mm 80g

1 x Faithfull Cloth Sanding Belt 560 x 100mm 60g

1 x Faithfull Cloth Sanding Belt 560 x 100mm 40g

1 x Faithfull Cloth Sanding Belt 560 x 100mm 120g

1 x Faithfull Cloth Sanding Belt 533 x 75mm 80g

1 x Faithfull Cloth Sanding Belt 533 x 75mm 60g

1 x Faithfull Cloth Sanding Belt 533 x 75mm 40g

1 x Faithfull Cloth Sanding Belt 533 x 75mm 120g

1 x Faithfull Cloth Sanding Belt 457 x 75mm 80g

1 x Faithfull Cloth Sanding Belt 457 x 75mm 60g

1 x Faithfull Cloth Sanding Belt 457 x 75mm 40g

1 x Faithfull Cloth Sanding Belt 457 x 75mm 120g

Length: 455mm.Width: 13mm.Grit: 80.

Length: 455mm.Width: 13mm.Grit: 60.

Length: 455mm.Width: 13mm.Grit: 40.

Length: 455mm.Width: 13mm.Grit: 120.

Pack of 3 Faithfull Cloth Sanding Belt 610 x 100mm 80g

Pack of 3 Faithfull Cloth Sanding Belt 610 x 100mm 120g

Pack of 3 Faithfull Cloth Sanding Belt 610 x 100mm 60g

Specifications: Grit: 60G.Pack quantity: 5.

DEWALT DTM8624 1/3 Mesh Sanding Sheets 240 Grit (Pack of 5).

DEWALT DTM8622 1/3 Mesh Sanding Sheets 120 Grit (Pack of 5).

DEWALT DTM8621 1/3 Mesh Sanding Sheets 80 Grit (Pack of 5).

The DTM8552 1/2 Mesh Sanding Sheets have the following specifications:Size: 115 x 228mm.Grit: 120.Pack quantity: 5.

The DTM8551 1/2 Mesh Sanding Sheets have the following specifications:Size: 115 x 228mm.Grit: 80.Pack quantity: 5.

The DTM3137 Mesh Sanding Discs have the following specifications:Size: 150mm.Grit: 240.Pack quantity: 10.

The DTM3135 Mesh Sanding Discs have the following specifications:Size: 150mm.Grit: 120.Pack quantity: 10.

The DTM3133 Mesh Sanding Discs have the following specifications:Size: 150mm.Grit: 80.Pack quantity: 10.

The DTM3127 Mesh Sanding Discs have the following specifications:Size: 150mm.Grit: 240.Pack quantity: 5.

The DTM3125 Mesh Sanding Discs have the following specifications:Size: 150mm.Grit: 120.Pack quantity: 5.

The DTM3123 Mesh Sanding Discs have the following specifications:Size: 150mm.Grit: 80.Pack quantity: 5.

The DTM3117 Mesh Sanding Discs have the following specifications:Size: 125mm.Grit: 240.Pack quantity: 10.

The DTM3115 Mesh Sanding Discs have the following specifications:Size: 125mm.Grit: 120.Pack quantity: 10.

The DTM3113 Mesh Sanding Discs have the following specifications:Size: 125mm.Grit: 80.Pack quantity: 10.

The DTM3107 Mesh Sanding Discs have the following specifications:Size: 125mm.Grit: 240.Pack quantity: 5.

The DTM3105 Mesh Sanding Discs have the following specifications:Size: 125mm.Grit: 120.Pack quantity: 5.

The DTM3103 Mesh Sanding Discs have the following specifications:Size: 125mm.Grit: 80.Pack quantity: 5.

The DTM3025 1/4 Mesh Sanding Sheets have the following specifications:Size: 115 x 115mm.Grit: 240.Pack quantity: 5.

The DTM3023 1/4 Mesh Sanding Sheets have the following specifications:Size: 115 x 115mm.Grit: 120.Pack quantity: 5.

The DTM3022 1/4 Mesh Sanding Sheets have the following specifications:Size: 115 x 115mm.Grit: 80.Pack quantity: 5.

Pack of 3 DEWALT Sanding Belts 356 x 64mm 150g

Pack of 3 Sanding Belts 356 x 64mm 100g

Pack of 3 DEWALT Sanding Belts 356 x 64mm 80g

Pack of 3 DEWALT Sanding Belts 356 x 64mm 60g

Pack of 3 DEWALT Sanding Belts 560 x 100mm 100g

Pack of 3 DEWALT Sanding Belts 560 x 100mm 80g

Pack of 3 DEWALT Sanding Belts 560 x 100mm 60G

Pack of 3 DEWALT Sanding Belts 560 x 100mm 40g

Pack of 3 DEWALT Sanding Belts 356 x 64mm 220g

Grade: 120 Grit.

Grade: 80 Grit.

Grade: 60 Grit.

Grade: 40 Grit.

These Blue Spot Sanding Flap Discs are suitable for efficient stripping and sanding of metal and wood surfaces. They are ideal for finishing. This 3 piece set includes the following:40 Grit, 60 Grit and 120 Grit. Each sanding flap disc has the following specifications:Diameter: 115mm.Bore size: 22.2mm.Max speed: 13,300/min, 80m/s.

Pack of 3 BLACK DECKER Aluminium Oxide Sanding Belts 451 x 13mm 60g

This pack of 5 BLACK DECKERX31034 Mouse Sanding Sheets contains:2 x 80 Grit, 2 x 180 Grit and 1 x 240 Grit.

Pack of 5 BLACK DECKERX31034 Mouse Sanding Sheets 240g

Pack of 5 BLACK DECKERX31034 Mouse Sanding Sheets 120g

Pack of 5 BLACK DECKERX31034 Mouse Sanding Sheets 80g

Grit: 180 (Extra Fine).Pack quantity: 6.

Grit: 120 (Fine).Pack quantity: 6.

Grit: 80 (Medium).Pack quantity: 6.

The Guide Clamp features integral clamping jaws and a locking lever that provides quick way of clamping the guide batten. It is ideal for holding and clamping workpieces and the aluminium extrusion incorporating T-slots. The clamp is fitted with a metric/imperial scale for setting lengths and stop positions and the scale can be be positioned by removing 20mm of the self-adhesive backing.

The Trend VJSAG36 is an adjustable angle guide to allow grooving with the router, or crosscutting with a circular saw. It has an adjustable angle range from 25 to 155 and preset angle for 30, 45, 60, 90, 120, 135 and 150. The router working length at 90 is 915mm (36 inch), the circular saw working length at 90 is 780mm (30 3/4 inch). It has an angle tolerance 0.2 with zeroing facility, adjustable position alloy extrusion with scale and requires three clamps. Will accept accessory friction clamps Ref. VJS/CK or VJS/CK/L.

This TCT Countersink clamps onto any drill between 3 mm and 7.2 mm in diameter. The drill passes through the body of the countersink and is secured by two hexagon bolts which clamp the countersink onto the drill at the required position. Recommended for wood and man made boards.By reversing the countersink on the drill the UNI / CS can be used as a non-cutting depth stop. NOTE:- Drills not included.

The Unibase enables routers with non-standard guide bush fittings to accept the range of Trend guide bushes. Will fit directly to most routers.Line-up pin used with a 16 mm plastic bush to ensure concentricity of the cutter to the guide bush when fitting the sub-base. Suits collet sizes 1/4inch, 8mm, 12 mm and 1/2inch. Instructions for fitting The line-up pin fit into the collet and is plunged through the router base. The line-up bush is fitted into the Unibase and secured. This is then placed over the line-up pin and rotated in order to line up the fixing holes. The Unibase screws are tightened and then the line-up bush can be replaced with any choice of Trend guide bushes. These range from 10 mm up to 30 mm (GB10 - GB32). For larger diameter cutters a 40 mm guide bush (GB40) is available.

This robust T-Square in Tufnol provides an instant means of squaring off, marking out, setting up jigs etc. Can be hung up when not in use. Length: 680mm.

Kitchen fitters pack containing 5 x TR17 X 1/2 TC Cutters. 12.7 mm x 50 mm.

The TR40D has a center tip for drilling abrasive materials. Dimensions:Shank: 1/2inCutting Diameter (D): 15mmCutting Length (C): 25mm

The TR37 is suitable for use use with Trend Lock JigsDimensions:Shank: 1/2 inCutting Diameter: 12mmCutting Length: 63mm.

The Trend TR35 Biscuit Jointer Set enables biscuit jointing with timber, man-made fibre and particle board. The right choice of bearing will ensure the correct depth of cut for biscuit sizes No. 0, 10 20. Specifications:Shank: 1/4in.Cutting Diameter (D): 37.2mm.Cutting Length (C): 4.0mm.

Trend TR30 Trade Shank Mounted Guided Profiler with extra-long shank ideal for trimming and profiling timber, man-made board. Features 2mm micro grain tungsten carbide tips, for cutting the most abrasive materials to give extra-long life. The cutter is PTFE coated, indicated by distinctive black colouring.The guide profiler can be used on hardwood and softwood, fibreboard, plywood and particle board, and has the dimensions etched on the extra-long 40mm shanks, for quick identification. Specifications:Shank: 1/2in.Cutting Diameter: 19.1mm.Cutting Length: 50.0mm.

Trend TR29 Trade range Shank mounted guided profiler with extra long shank ideal for trimming and profiling timber, man-made board. Features 2 mm micrograin tungsten carbide tips, for cutting the most abrasive materials to give extra long life. The cutter is PTFE coated, indicated by distinctive black colouring. The guide profiler can be used on hardwood and softwood, fibreboard, plywood and particle board and has the dimensions etched on the extra long 40 mm shanks, for quick identification. Dimensions:Shank: 1/4in.Cutting Diameter (D): 12.7mmCutting Length (C): 25.4mm

The Trend TR28 Trade Bearing Guided profiler with an extra-long shank is ideal for trimming and bevelling timber, lippings and plastic laminate edges. Features 2mm micro grain tungsten carbide tips, for cutting the most abrasive materials to give extra-long life. The cutter is PTFE coated, indicated by distinctive black colouring.The dimensions are etched on the extra-long 40mm shanks for quick identification. Specifications::Shank: 1/2in.Cutting Diameter: 12.7mm.Cutting Length: 25.4mm.

TR18D have a centre tip for drilling abrasive materials. Dimensions:Shank: 1/2 inCutting Diameter (D): 12.7mm (1/2 in)Cutting Length (C): 63mm

TR17D have a centre tip for drilling abrasive materials and are designed to work with the Trend Worktop jigs Dimensions:Shank: 1/4inCutting Diameter (D): 12.7mmCutting Length (C): 50.0mm

TR12 features a solid carbide insert and centre tip for drilling. Dimensions:Shank: 1/4inCutting Diameter (D): 12mmCutting Length (C): 19mm

Tooling Tungsten Carbide1/4in Shank.Angle A = 90° D = 9.5 mmC = 12.7 mm

Tooling Tungsten Carbide1/4in Shank.Angle A = 90° D = 12.7 mmC = 25 mm

Tooling Tungsten Carbide1/2 in Shank.Angle A = 90° D = 12.7 mmC = 25 mm

The Trend T421/35 hinge cutter is typically used by kitchen unit manufacturers and fitters for cutting 35mm blind holes ready to accept recessed circular hinges, it has a TCT blade for longer life.This bit is best suited for use on thinner section laminate covered board.Diameter - 35mmShank - 1/4in

Hinge Sinkers for drilling machines. TCT Hinge sinking cutter for pillar drills only. Designed for recessing holes in melamine covered chipboard to receive circular hinges. Diameter. 35mm.Shank. 8mm.

This Trend STAIR/AStaircase Jig is a template jig with well proven means of routing out stair housings quickly and accurately. It is constructed from hard wearing compact grade high pressure laminate and includes a reversible fence for exact matching of stair strings and fully adjustable nosing piece. It has a built-in heavy duty front clamp for quick clamping for each trench.It is adjustable to suit private and common stair angle pitches and can be used with all heavy-duty routers over 1600 watts. The sub-base is pre-drilled to suit Trend/DeWalt/Elu 1/2-inch routers, for other makes the sub-base will have to be redrilled. Kit includes:-1 x Adjustable reversible clamp.1 x Reversible clamp bar.1 x Sub-base.1 x Nose piece.1 x Line up pin and bush.2 x Spanners.Specifications: Tread Thickness: 22-32 mm.Slider Diameter: 30 mm.Nosing Adjustment: 16-19 mm.Length: 585 mm.Height: 485 mm.Width: 12.5 mm.Weight: 6.17kg.

Trend SET/SS9TC 15 Piece Router Bit Starter Set contains a range of popular 1/2in tungsten carbide tipped cutters for a variety of applications. Suitable for softwood, hardwood, chipboard, plywood and MDF. Supplied in a plastic carry case. Contains: 1 x Single Flute: 4.8 x 11mm.3 x Two Flute: 6.3 x 19mm, 12.7 x 25mm and 19 x 25mm.1 x Dovetail: 12.7mm.2 x Guided Round Over: R9.5mm and R12.7mm.1 x Guided Chamfer: 45.1 x Guided Roman Ogee: R4mm.1 x Guided Trimmer: 12.7mm.2 x Guided Cove: R6.3mm and R12.7mm.1 x V-Groove: 45.1 x Core Box: R6.35mm.1 x Guided Rebater: Rebate 11.1mm.

Trend 12 Piece Router Bit Starter Set contains a range of the most widely used cutters for decorative woodworking. Made from tungsten carbide with 1/4in shanks and supplied in a plastic carry case. Contains: 2 x Straight: 6.3 x 16mm and 12.7 x 19mm.1 x Dovetail: 104 x 1/2in.2 x Guided Round Over: R6.35mm and R9.5mm.1 x Guided Chamfer: 45.1 x Guided Rebater: 9.5mm.1 x Guided Trimmer: 12.7mm.1 x Guided Cove: 6.3mm.1 x V-Groove: 45.1 x Core Box: R6.35mm.1 x Guided Ogee: R4mm.

This Trend 1/4in Router Cutter Set has a range of tungsten carbide tipped cutters for decorative woodworking. Suitable for softwood, hardwood, chipboard, plywood and MDF. Supplied in a plastic carry case. Contains: 2 x Straight: 6.3 x 16mm and 12.7 x 25mm.1 x V-Groove: 45 x 12.7mm.2 x Guided Round Over: R6.35mm and R9.5mm.1 x Guided Ogee: R4mm.

This Trend 1/2in Router Cutter Set has a range of Tungsten Carbide Tipped cutters for decorative woodworking. Suitable for softwood, hardwood, chipboard, plywood and MDF. Supplied in a plastic carry case. Contains: 2 x Straight Cutters: 6.3 x 16, 12.7 x 25mm1 x V-Groove Cutter: 45 x 12.7mm2 x Guided Round Over: R6.35mm, R9.5mm1 x Guided Ogee: R4mm

The Trend 50 Piece Router Bit Starter Set contains a range of popular 1/4in tungsten carbide tipped cutters for a variety of applications. Suitable for softwood, hardwood, chipboard, plywood and MDF. Supplied in an aluminium carry case. Contains: 2 x Single Flute Straight: 3 x 12.7mm and 4 x 12.7mm.8 x Two Flute Straight: 6 x 16mm, 8 x 19mm, 9.5 x 19mm, 12.7 x 19mm, 14.2 x 19mm, 15.9 x 19mm, 19 x 19mm and 20 x 19mm.4 x Guided Flush Trim: 9.5 x 12.7mm, 9.5 x 25.4mm, 12.7 x 12.7mm and 12.7 x 25.4mm.1 x Combination Bevel: 12.7mm x 60.1 x Mortiser Cutter: 12.7 x 12.7mm.1 x Classic Panel Cutter: 12.7 x 9mm.1 x Keyhole Cutter: 9.5mm.3 x Core Box: R3.2, R4.8 and R6.35mm.2 x Long Series Core Box: R4.8 and R6.35mm.2 x 60 V-Groove: 9.5mm and 16mm.2 x 90 V-Groove: 9.5mm and 12.7mm.4 x 14 Dovetail: 9.5mm, 12.7mm, 14.3mm and 16mm.1 x Pierce Trim: 6.35 x 18mm.2 x Guided Cove: R6.35 and R9.5mm.4 x Guided Round Over: R3.2, R6.3, R7.9 and R9.5mm.4 x Guided Ovolo: R3.2, R6.35, R7.9 and R9.5mm.2 x Guided Roman Ogee: R4 and R6.35mm.2 x Guided Chamfer: 25 and 45.2 x Guided Slotter: 6.35mm kerf and 9.5mm kerf.1 x Guided Rebater ( x cut): 28 x12.7mm, Rebate: 9.5mm.1 x Guided Classic Decor: R9mm.

The Trend Solid Tungsten Carbide two flute cutters are turned, milled and ground from a solid piece of Tungsten Carbide and provide the greatest durability when used under stress load conditions. They offer better plunge cutting characteristics than TCT.Dimensions:Shank: 1/4inCutting Diameter (D): 6.3mmCutting Length (C): 28.0mm

The Trend Rota - Tip Replacement Screws are tapered head replacement screws for Trend Rota- Tip router cutters. They are high quality replacement screws providing the correct fixings to secure the Rota-Tip blades for maximum performance.The Torx head fitting ensure secure tightening pressure when fitting blades, the 6mm tapered head provide correct clamping pressure to the blades for safe operation and ensures the Rota-Tip cutters are always ready to go. Specifications: Head type: tapered x 6 mm diameter.Thread: M3.5 x 0.6.Thread length: 5 mm.Driver type: Torx.

The Trend Rota-Tip Cutters are highly economical for use in production applications. The blades, which are manufactured from a harder grade of tungsten carbide than conventional tooling is rotated to expose a new cutting edge ensuring the diameter of the tool remains constant.The Blades are replaced when all edges become chipped or dull. They are fixed directly onto tool bodies using Torx screws and may be replaced without removing the cutter from the router. All Rota-Tip cutters are supplied with blade(s) fitted and a Torx key. Specifications: Cut Length: 29.5mm.Overall Length: 89mm.Cut Diameter: 12.7mm.Shank: 1/2in.

The Trend RB/B is a spare Replacment solid carbide Rota-Tip Blade to suit Rota Tip Cutters. Specifications: Length. 49.5mm.Width. 12mm.Thickness:1.5mm.Holes: 2.Hole Diameter: 4mm.Hole Centers: 26mm.End Clearance: Yes.

The Trend RB/A/10 Replacement Blades are high quality solid carbide replacement cutters for Trend RT/04, RT/05, RT/06, RT/07, RT/08, RT/10, RT11, RT/11M, RT/15, RT/16, RT/17 and RT/71 straight cutters. The blades can be rotated 180 giving two cutting edges for longer lifespan between cutter changes. They are ideal for working with hard or softwoods and abrasive materials including chipboard, ply and MDF. These blades fit to the range of compatible Trend Rota-Tip cutters for worktop joint cutting, edge work, rebating and trimming work with templates. Pack of 10 blades giving 20 cutting edges. This Trend product is an affordable solution, ideal for trade and commercial users. Length: 29.5mm.Width: 9mm.Thickness: 1.5mm.Holes: 2.Hole Diameter: 4mm.Hole Centres: 14mm.End Clearance: Yes.Specification: Pack Quantity: 10.

The Trend PH/JIG/BS Single Pocket Hole Jig is for fast and accurate joining of solid timber and plywood giving strong instant joints in single or multiple fixing positions. It can help to build cabinets, furniture and small joinery projects with ease. The hardened drilling sleeves provide accurate, consistent pockets. There is also a handy built-in drill depth gauge that can be reversed for new or repair work. Works with timber thicknesses from 12mm to 38mm. Portable and adaptable. Supplied with: 1 x Pack of Assorted Screws, 1 x 150mm Square Drive Bit and 1 x HSS Drill Bit with Collar.