RIDGID 23 Bench Yoke Vice Capacity: 3-80mm (1/8-3in).Weight: 9.0kg.

RIDGID 21 Bench Yoke Vice Capacity: 3-50mm (1/8-2in).Weight: 4.0kg.

RIDGID 156-PE Quick-Acting Tubing Cutter For Polyethylene (PE) Pipe Capacity: 110-160mm (4.1/4 - 6in).Std. Wheel: E2880.Weight: 2.23kg.

1 x Ridgid K45-AF5 Drain Cleaning Gun Kit 110V Version

1 x Ridgid K-45 AUTOFEED Drain Cleaning Gun 110V Version

RIDGID 36597 Quick-Acting 153 Tube Cutter For Copper Std. Wheel: E-2558.Capacity: 32-90mm (1.1/4 - 3.1/2in).Weight: 0.92kg.

RIDGID 36592 Quick-Acting 153-P Tube Cutter For Plastic Std. Wheel: E-2155.Capacity: 25-75mm (1 - 3in).Weight: 0.92kg.

The RIDGID 460-6 Portable TRISTAND Chain Vice has an optimised base layout to maximise working area with a convenient lug to clamp the weld ground. There is a rugged leg chain for the tough demands with a durable tool tray. Size: 3-150mm (1/8 - 6in).Weight: 19.4kg.

RIDGID 205-S Ratcheting Enclosed Feed Tube Cutter Capacity: 6-60mm (1/4 - 2.3/8in).Weight: 0.91kg.

RIDGID 205 Ratcheting Enclosed Feed Tube Cutter Capacity: 6-60mm (1/4 - 2.3/8in).Weight: 0.91kg.

The RIDGID 975 Roll Groover acts as 2 tools in one. It can mount onto the 300 Power Drive for machine powered roll grooving but is also designed to manually roll groove in-place pipe. The 975 Combo Groover includes new, patented auto tracking technology for significantly easier grooving. Whether you're doing machine-powered or manual grooving, the Auto Tracking gauge keeps the pipe automatically engaged to the groover throughout the grooving process. The 975 also includes a permanently depth setting gauge for quicker, repeatable set-up. When manually roll grooving, the 975's 55% higher gear reduction means less hand force required versus competitive manual roll groovers. This is especially helpful for over-head roll grooving. A tough, ductile iron construction means the 975 can absorb jobsite abuse and provide accurate grooves time after time. A cast-in handle makes the 975 easily portable to and from the jobsite. Capacity: 1 ¼in - 6in Schedule 10 and Schedule 40 steel, aluminium, and PVC pipe.1 1/4in - 6in Schedule 10, 1 1/4in - 2in Schedule 40 stainless steel pipe, 11/2in - 3in Schedule 80 PVC pipe. With roll change, 2in - 8in copper tube (Type K, L, M, and DWV).Depth Adjustment: Adjusting screw and integral, index depth gauge.Actuation: Feed screw with 1/2in ratchet wrench (included), or any 15/16in hex wrench. Power Drive Mounting: RIDGID 300 Power Drive 38/57 RPM (reverse direction only).

RIDGID Heavy-Duty Screw Feed No.30 Tubing and Conduit Cutter Capacity: 25-79mm (1 - 3.1/8in).Std. Wheel: E-1240.Weight: 1.60kg.

RIDGID Screw Feed No.30 Tubing and Conduit Cutter Capacity: 25-79mm (1 - 3.1/8in).Std. Wheel: F-158.Weight: 1.60kg.

RIDGID Heavy-Duty Screw Feed No.20 Tubing and Conduit Cutter Capacity: 16-54mm (5/8 - 2.1/8in)Std. Wheel: E-1240.Weight: 0.79kg.

RIDGID Screw Feed No.20 Tubing and Conduit Cutter Capacity: 16-54mm (5/8 - 2.1/8in)Std. Wheel: F-158.Weight: 0.79kg.

RIDGID Heavy-Duty Screw Feed No.15 Tubing and Conduit Cutter Capacity: 5-28mm (3/16 - 1.1/8in).Std. Wheel: E-1240.Weight: 0.68kg.

RIDGID Screw Feed No.15 Tubing and Conduit Cutter Capacity: 5-28mm (3/16 - 1.1/8in).Std. Wheel: F-158.Weight: 0.68kg.

RIDGID Screw Feed No.10 Heavy-Duty Tubing and Conduit Cutter Capacity: 3-25mm (1/8 - 1in).Std. Wheel: E-1240.Weight: 0.40kg.

RIDGID Screw Feed No.10 Tubing and Conduit Cutter Capacity: 3-25mm (1/8 - 1in).Std. Wheel: F-158.Weight: 0.40kg.

The RIDGID No.246 Soil Pipe Cutter has a ratchet-action handle parallel to pipe, which allows for application in minimum width trenches. Comes complete with hand guard to protect the operators knuckles when cutting. Cuts 1 1/2 - 6in (40-150mm) clay, cast-iron, clay pipe, cement pipe and 4in class 22 water main.

The RIDGID 44-S Heavy-Duty Pipe Cutter (USA Type) is designed for work in areas where a complete turn is impossible. Equipped with 4 heavy-duty wheels. It has a second handle which makes two-man leverage possible for large pipe sizes. Specification: Capacity: 65-100mm (2.1/2 - 4in)Weight: 9.1kg

The RIDGID 42-A Heavy-Duty 4-Wheel Pipe Cutter is designed for work in areas where a complete turn is impossible. Equipped with 4 heavy-duty wheels and a short handle for use in confined areas. Specification: Capacity: 20-50mm (3/4 - 2in)Weight: 3.1kg

RIDGID 3-S Heavy-Duty Pipe Cutter Capacity: 25-75mm (1-3in).Weight: 6.9kg.

RIDGID 2-A Heavy-Duty 3 Wheel Pipe Cutter Capacity: 3-50mm (1/8 - 2in).Weight: 3.2kg.

RIDGID 2-A Heavy-Duty Pipe Cutter Capacity: 3-50mm (1/8 - 2in).Weight: 3.2kg.

This Ridgid 118 AUTOFEED 2-in-1 Midget Cutter is designed for hard and soft copper, aluminium, brass and plastic tubing. It is ideal for use in restricted spaces on small diameter pipes. It is fitted with a feed assisting spring mechanism for controlled and automatic advance and has strong, lightweight slide and wheel housing.Capacity: 6-28mm.Supplied with spare cutting wheel.

Designed for optimised performance on stainless steel tube, the Ridgid 65S cutter has a specially designed cutter wheel, with six individual bearings, which replace traditional rollers. The bearings create a smoother cut, and allow for increased speed around the tube. The cutter has a quick-acting mechanism, which rapidly adjusts to different sized tubing.An oversized, easy-to-grip knob allows for quick and easy adjustments, and the contoured frame allows for easy alignment while adjusting the cutter to make a cut. Capacity: 6-65mm.

RIDGID 31667 Quick-Acting 156-P Tube Cutter For Plastic Std. Wheel: E-2157.Capacity: 110-160mm (1.1/2 - 4in).Weight: 2.23kg.

RIDGID 31657 Quick-Acting 154-P Tube Cutter For Plastic Std. Wheel: E-2156.Capacity: 50-110mm (1.1/2 - 4in).Weight: 1.72kg.

RIDGID 31652 Quick-Acting 154 Tube Cutter For Copper Std. Wheel: E-2558.Capacity: 48-116mm (1.7/8 - 4.1/2in).Weight: 1.72kg.

RIDGID 31647 Quick-Acting 152-P Tube Cutter For Plastic Std. Wheel: E-2155.Capacity: 10-63mm (1/8 - 2in).Weight: 0.92kg.

The Ridgid 152 quick acting tube cutter is designed for cutting plastic and metal tubing, this Ridgid cutter is quick-acting with an I-beam construction, hardened wear surfaces and thrust bearing slide assemblies for smooth operation. It also features a fold-away reamer.Capacity: 6-66mm (1/4 - 2 5/8in) Supplied with spare cutting wheel.

RIDGID 31632 Quick-Acting 151 Tube Cutter For Copper Std. Wheel: E-3469.Capacity: 6-42mm (1/4 - 1.7/8in).Weight: 0.56kg.

The RIDGID 342 Internal Wrench holds closet spuds and bath, basin and sink strainers. They can also be used to install or extract Schedule 40 nipples. The jaws expand via an eccentric action and are reversible for various sizes.

RIDGID C-36 Heavy-Duty Chain Wrench Size: 900mm (36in).Rated Pipe Capacity: 110mm (4.1/2in).Actual O.D. Capacity: 185mm (7.1/2in).Chain Length: 725mm (29in).Weight: 7.1kg. Rated Pipe Capacity is the nominal diameter that can be correctly tightened.Actual O.D. Capacity is the actual O.D. that chain can accommodate.

RIDGID C-24 Heavy-Duty Chain Wrench Size: 600mm (24in).Rated Pipe Capacity: 75mm (3in).Actual O.D. Capacity: 125mm (5in).Chain Length: 500mm (20.1/4in).Weight: 3.7kg. Rated Pipe Capacity is the nominal diameter that can be correctly tightened.Actual O.D. Capacity is the actual O.D. that chain can accommodate.

RIDGID C-18 Heavy-Duty Chain Wrench Size: 450mm (18in).Rated Pipe Capacity: 60mm (2.1/2in).Actual O.D. Capacity: 125mm (5in).Chain Length: 500mm (20.1/4in).Weight: 2.7kg. Rated Pipe Capacity is the nominal diameter that can be correctly tightened.Actual O.D. Capacity is the actual O.D. that chain can accommodate.

RIDGID C-14 Heavy-Duty Chain Wrench Size: 350mm (14in).Rated Pipe Capacity: 50mm (2in).Actual O.D. Capacity: 125mm (5in).Chain Length: 460mm (18.1/2in).Weight: 1.2kg. Rated Pipe Capacity is the nominal diameter that can be correctly tightened.Actual O.D. Capacity is the actual O.D. that chain can accommodate.

The RIDGID Chain Wrenches has a sturdy, cast-iron housing with an I-beam handle and a double jaw that gives fast, ratchet-like action in either direction. It is ideal for use in close quarters. This light-duty model has a one-piece forged alloy steel handle and jaw. Size: 300mm (12in).Rated Pipe Capacity: 50mm (2in).Actual O.D. Capacity: 100mm (4in).Chain Length: 390mm (15.3/4in).Weight: 0.8kg. Rated Pipe Capacity is the nominal diameter that can be correctly tightened.Actual O.D. Capacity is the actual O.D. that chain can accommodate.

The RIDGID E110 Offset Hex Wrench design gives multi-sided, secure grip on all hex nuts, square nuts, unions and valve packing nuts. The extra-wide opening is ideal for securing drain nuts on sinks and tubs and the thin, smooth jaws slip into the tightest places. Specification Size: 240mm (9 1/2in).Pipe Capacity: 29-67mm (1.1/8 - 2.5/8 in).Weight: 0.6kg.

This Ridgid RC-2375 Ratchet pipe cutter with a large diameter and an advanced blade design. This, combined with the ratcheting mechanism, reduces the amount of hand force needed to cut through hard plastic material. It has an aluminium construction for heavy-duty use, ergonomic grips and a quick-change blade pin. It easily cuts plastic pipe and tubing such as PVC and CPVC, as well as PEX, polyethylene, polybutylene and rubber hose. Capacity: 12-63mm.

Designed for optimised performance on stainless steel tube, the Ridgid 35S cutter has six individual bearings, which replace traditional rollers. The bearings create a smoother cut, and allow for increased speed around the tube.An ergonomic knob allows for easy adjustments, and the contoured frame allows for easy alignment while adjusting the cutter to make a cut. Capacity: 5-35mm.

The RIDGID K-400 Drum Machine offers several unique, user-friendly features to make the toughest drain cleaning jobs easier and hassle-free. Designed with a sleek profile, the Model K-400 is a great fit for drain cleaners, service plumbers, facility and institutional maintenance departments and property management companies. The integrated transport cart allows for easy movement to and from the job site. Heavy-duty, large wheels easily navigate over bumps and up stairs. There is also an integrated telescoping handle that provides high-handle height during transport. It is fitted with AUTOFEED, a patented, automatic cable feed that powers the cable in and out of the drain. Reverse the direction of the Autofeed and the cable feeds back into the drum A cable control system causes the drum to stop spinning when the blade becomes lodged in a blockage, limits potential for cable to flip-over in the drum and helps to indicate to the operator when blockages are encountered. Solid Core Cable uses a tough 3⁄8in (10mm) Integral Wound (IW) cable that is rugged and kink resistant. Comes with 1 x C-32IW 3/8in (10mm) x 75ft (23m) Integral Wound Solid Core Cable, 1 x Pair of Gloves, 1 x T-260 Tool Kit (T-202 Bulb Auger, T-205 C Cutter, T-211 Spade Cutter A-13 Pin Key) and 1 x AUTOFEED Attachment. Specification Input Power: 380 Watt, 230/240 Volt. Cable Spin Speed: 165 RPM.Drum Capacity: 3/8in (10mm) Diameter Cable: 100ft (30.5m). Length: 24in (61cm).Height: 23in (58.5cm).Width: 17in (43.2cm).Weight Machine Only: 20.4kg.Cable Weight: 11.8kg.

These Ridgid shears are rugged, precise and have a ratcheting mechanism for fast, effortless cutting of plastic tubing. They have Burr less cutting operation that provides a square cut. The RC-1625 model is suitable for PVC, CPVC, PEX, PE, PB and multi-layer rubber hose. The lower handle has raised ridges, ½ inches apart, for quick, easy measurements and improved grip. Capacity: 3-42mm. (1/8 - 1 5/8 in)

These Ridgid shears are rugged, precision shears for fast, effortless single stroke cutting of plastic tubing. The PC-1375 multi-layer cutter is suitable for PVC, CPVC, PEX, PE, PB and multi-layer rubber hose. The lower handle has raised ridges 1/2in apart for quick, easy measurements and improved grip. Capacity: 3-35mm.

The Ridgid Head Folding Pipe Stand has a locking ring that allows for quick vertical height adjustments. It has folding legs, making it easy to transport and requiring 70% less area to store. Suitable for use with threading machines, roll groovers etc. Specifications: Height adjustment: 71 - 132cm (28 - 51in).Max. pipe capacity: 300mm (12in).Max. weight capacity: 1,134kg (2,500lb).Weight: 10.9kg (24lb).

This Ridgid 110/115 Volt Power Threader has a universal 1.7kW (50-60Hz) motor and features a hammer-type chuck with replaceable, rocker action jaw inserts. Its through-the-head oiling system has adjustable flow and an integral oil reservoir. The gerotor pump is self-priming and ensures a constant flow of the oil.Spindle speed: 36 RPM.Threads ¼ to 3-inch pipe Supplied with:Die Heads: Model 815A 1⁄8 - 2 inch, BSPT; Model 928A 21⁄2 - 3 inch, BSPT.Dies: 1⁄2 - 3⁄4-inch BSPT Alloy. 1 - 2-inch BSPT Alloy. 21⁄2 - 3-inch BSPT High Speed.Cutter: Model 763, 1⁄4 - 3-inch, self-centering, with E-1032 cutter wheel.Reamer: Model 743, 1⁄4 - 3 inch, 5-Fluted.Oil: 5 litres thread cutting fluid.

RIDGID Threading Machine Dies Size: 1 - 2in BSPT.Die Material or Type: Alloy RH.

RIDGID Threading Machine Dies Size: 1/2 - 3/4in BSPT.Die Material or Type: Alloy RH.

The RIDGID 258 Power Pipe Cutter cuts 2 1⁄2 - 8in (65-200mm) schedule 10*/40 steel pipe, galvanized pipe, rigid conduit, etc. at the job site or in the shop. Powered by the RIDGID No. 700 Power Drive, the 258 is a displacement cutter that provides square cuts. The operator controls the feeding rate by pumping the hydraulic foot pump throughout the operation. A square cut with minimal burr on either 21ft (6m) or nipple lengths of pipe is achieved quickly, without abrasive dust, sparks, or open flame. Also, the RIDGID Pipe Roller for bevelling can be used to rotate the pipe while second operator uses a grinder to bevel the pipe. No Load Speed: 26-30/min. Capacity: Schedule 10/40 Steel Pipe: 2.1⁄2 - 8in (65-200mm). Weight: 48kg.

RIDGID 425 Portable TRISTAND Chain Vice features a quick grab, self-locking latch and carrying handle for ease of transport. Capacity: 3-60mm (1/8 - 2.1/2in).Weight: 14.5kg.

This heavy-duty workbench from Ridgid has a tough wood working surface which has been specially treated to resist water and dust. The legs are of tubular construction and designed to carry heavy loads. This Workbench is simple to erect and dismantle and easy to transport. Size: 107 x 75cm.Table thickness: 30mm.Height: 84cm.

This Ridgid Manual Hand Threader has a cast-iron construction and a new die profile for superior thread quality. An increased number of larger coolant slots allow for better die lubrication. The cast-iron cover plate is rigid and provides a more consistent thread quality. The set comes complete with a ratchet handle, dies, die heads, and metal case. Dies supplied: 3/8in, 1/2in, 3/4in, 1in, 1.1/4in, 1.1/2in and 2in.

This Ridgid 115 Volt threading machine with a universal, 1,500 Watt reversible, single phase motor. It features recessed forward/off/reverse switches and an integral safety foot switch. The machine has a hammer-type chuck with replaceable, rocker action jaw inserts. It is a single speed threader (38 rpm) and has a rear centring device with cam action. Supplied with: Stand, universal die head, universal alloy die set, pipe cutter and cutter wheel, reamer, carriage with lever and oiler. Pipe Capacity: 1/8in - 2in (3mm-50mm).Bolt Capacity: 1/4in - 2in (6mm-50mm).Spindle Speed: 38 RPM.Weight: 95kg.

This Ridgid cutting oil is excellent at cooling threads and pipe during operation. It speeds metal removal, improves thread quality and reduces threading torque.It is free of chlorine and other halogens. PCB's and heavy metals. Suitable for all Ridgid threading machinesSize: 5 litres.

IRWIN Record Spares for Tube and Pipe cutters.Replacement cutting wheel for IRWIN Record 200-30C copper pipe cutter.

IRWIN Record TS10 Tripod Stand is a portable, stove enamelled, folding unit is ideal for use on site and in workshops where space is limited. The vice platform is drilled to receive either a chain vice or hinged pipe vice.

The Record Irwin T850026 Plastic Pipe Cutter features a V shaped blade which allows for an off-centre motion, reducing tube deformation. The blade provides increased cutting pressure whilst remaining easy to use. The slicing motion of this specially hardened steel blade means that it is sharpened every time a cut is made. Capacity: 26mm.

Record IRWIN 96 Hinged Pipe Vice. Pipe Capacity: 3-150mm (1/8 - 6in). Can be fitted to Bench, NOT recommended for use on stand.

IRWIN Record 93.1/2C Hinged Pipe Vice. Pipe Capacity: 3-90mm (1/8 - 3.1/2in).

IRWIN Record 92C Hinged Pipe Vice. Pipe Capacity: 3-50mm (1/8-2in).

A versatile lightweight chain wrench of slim compact design to fit all shapes of fittings up to 4in diameter.Drop forged handle with profiled and hardened teeth.Can be used in either direction without removal from the work, with wide range of industrial and domestic applications. Length 330mm (13in) Capacity 100mm (4in)

The IRWIN Record 202 Roller Pipe Cutter 50mm (2in) is a high-quality robust cutter for all kinds of steel and cast-iron pipe. Guaranteed against breakage with thin section specially hardened cutting wheel. The roller ensures the cutter is set and kept square to the pipe and rolls down burr. Its head includes safety stop to prevent the cutting wheel being damaged by the rollers. Capacity: 3 - 50mm (1/8 to 2in).

IRWIN Record 200-45 Pipe Cutter is perfect for cutting plastic pipe with exceptionally thin cutting wheel and roller.It will also cut copper tube but its use should be confined to one or the other as cutting copper will reduce the effectiveness of the wheel on plastics. Die-cast body with stove enamelled rust resistant finish. Capacity: 15 to 45mm (9/16 to 1 3/4in)

The IRWIN Record 200-30C Copper Tube Cutter is a compact and accurate cutter with steel wheel and roller mounted in precision die-cast body. Strong and lightweight, it is designed to cut copper, brass, aluminium, or thin-walled steel. Features a steel de-burrer, which folds into the body when not in use. A spare cutter wheel is located in the handle. Capacity: 3-30mm (1/8in - 1.1/8in) Copper Tube.

IRWIN Record 183C Chain Pipe Vice. Pipe Capacity: 12-200mm (1/2-8in).

IRWIN Record 182C Chain Pipe Vice. Pipe Capacity: 6-100mm (1/4-4in).

Size 10 metre

Size 4 metre.

Size 2 metre .

The Sievert 306311 Regulator is fitted with an automatic hose failure valve that will shut the gas supply off in the event of a hose failure. With adjustable pressure from 1 to 4 bar with a POL connection. Max Capacity: 5-12Kg/H.

The Sievert 306111 Regulator with adjustable pressure from 1 to 4 bar with a POL connection. For large volume gas usage. Max Capacity: 5-20Kg/H.

The Sievert Psi 3380 Portable Soldering Iron made from high quality titanium and aluminium and powered by a single disposable gas cartridge. It is flexible and ideal for many applications. The burner incorporates an effective windshield which totally encases the flame. It has piezo ignition, and the precise valve in the handle makes it easy to obtain the right heat for the copper bit. The ergonomic handle is comfortable to use. Supplied with a copper bit and 2 replacement gas cartridges. Work Time: 60 - 90mins with one cartridge.

The Sievert Cyclone Torch Kit fitted with a cyclone burner for rapid pipe soldering and brazing. Fits all standard propane cylinders and is suitable for plumbing and engineering applications. Contains the following: 1 x 3486 Handle.1 x 3524 Cyclone Burner.1 x Hose Failure Valve.1 x 4 Metres of LPG Hose.

The Sievert DN20056X Regulator with adjustable pressure from 0.5-4 bar and a 3/8in BSP connection.

5mm inline LPG Hose to Hose Connector.

The Sievert B1022 3/8in Nut with 6mm tail for connecting 6mm LPG hose to a 3/8in male connector.

Primus 8843 10mm solder bit for use with 2293 and 2294.Copper bit, one end pointed, the other flat, for soldering and joining lead and tin.Can be used with other Primus Burners.

Primus 8725 Full Flame Burner for use with 8716 and 219522mm Diameter.7.0Kw.For light brazing and copper pipes up to 40mm.Brass construction.

Primus 8720 Pin Point BurnerFor use with 8716 and 2195114mm Diameter.0.75Kw.For light brazing and copper pipes up to 10mm.Brass construction.

Primus standard 8719 Burner - Medium.For use with 8716 and 2195.16mm diameter.2.0Kw.For light brazing and copper pipes up to 22mm.Brass construction.

Sievert 8716 Neck and Valve Assembly for direct connection onto the Primus 2000 cylinder giving precise flame control. Back pressure valve to reduce the risk of a flare-up. It will accept burners of M8 x 0.75 thread from the Sievert Burner range 8725, 8719, 8720, 8842.

The Sievert 8710 Soft flame burner is designed for cable shrinking and heating jobs. It produces a wind stable soft flame. For use with the 253501, 253511 and 253547 Powerjet. Diameter: 24mm.

The Sievert 8708 Hot Air Burner has been designed for shrinking and paint stripping. It produces a powerful, wind stable hot-air stream. For use with the 253501, 253511 and 253547 Powerjet. Diameter: 38mm.

The Sievert 8707 Cyclone Burner has been designed for brazing and soft soldering. It produces an intensive and effective short flame that reaches around the pipe. For use with the 253501, 253511 and 253547 Powerjet. Diameter: 16mm.

The Sievert 8706 Cyclone Burner has a 14mm diameter and is fitted with a bayonet connection. Its unique wrap around flame provides even heating of pipes. It can solder up to 40mm in diameter, brazing up to 18mm in diameter and has a 2.2kW Rating. For use with the 253501, 253511 and 253547 Powerjet.

8704 Standard Burner has a 16mm diameter and is fitted with a bayonet connection. It can solder up to 18mm in diameter and has a 1.2kW Rating. For use with the 253501, 253511 and 253547 Powerjet.

The Sievert 87020 Pin Point Burner has a 15mm diameter and is fitted with a bayonet connection. It can solder up to 10mm in diameter and has a 0.5kW Rating. For use with the 253501, 253511 and 253547 Powerjet.

Primus 8306 sealing O ring for primus valve to cylinder.2 pack.

Primus 8303 Sealing Washer for Primus valve to cylinder.Pack. 2.

Sievert high pressure regulator (10kg) with hose failure valve. The pressure regulator has a P.O.L. (Prest-o-Lite) fitting - a fitting used exclusively for flammable gases. 3/8 inch outlet.

The Sievert Turbojet Twin Burner 360 Swivel Torch has been developed for professional users and is 50% lighter than its predecessor with a piezo ignition for soldering and brazing. The burner can now be tilted in all directions, thanks to its cyclone flame, a rotating flame that wraps around tubes, providing extra smooth heat distribution. With a built-in pressure regulator. Connection Type: 1in US.

The Sievert Turbojet Single Burner 360 Swivel Torch has been developed for professional users and is 50% lighter than its predecessor with a piezo ignition for soldering and brazing. The burner can now be tilted in all directions, thanks to its cyclone flame, a rotating flame that wraps around tubes, providing extra smooth heat distribution. With a built-in pressure regulator. Connection Type: 1in US.

Sievert 253547 US Powerjet Blowtorch Only - Fits 1in UNEF Thread Burner Inculded: 870701.Burner Diameter: 16mm.Gas Consumption: 230g/h at 2 bar.Effect: 2.9kW.Connection: US Fits 1in UNEF Thread. Gas Cartridge NOT Inculded.

The Sievert 2535 Powerjet Kit is a powerful and efficient torch system with an ergonomic handle. It is both long lasting and reliable, as well as comfortable to grip. The automatic piezo ignition along with trigger on/off function helps to prevent LPG wastage. The anti-flare feature enables the torch to operate in all positions. The torch has a full range of interchangeable nozzles for added versatility. Applications include soldering/brazing, heating, precision work, shrinking and paint stripping, among many others. Supplied with 1 x Ultragas 220583 that has a gas mixture of propane, butane, propene and acetone to give a flame temperature of 2,100C. It also has a foam insert to enable the cartridge to be used upside down for longer periods. The self sealing valve is constructed in two layers for additional safety. Complies with EN417 Regulations. Specification Burner Included: 870601.Burner Diameter: 14mm.Gas Consumption: 170g/h at 2 bar.Effect: 2.2kW.Connection: EU Fits EN417 7/16in.

Sievert 253511 EU Powerjet Blowtorch Only - Fits EN417 Burner Included: 870601.Burner Diameter: 14mm.Gas Consumption: 170g/h at 2 bar.Effect: 2.2kW.Connection: EU Fits EN417 7/16in. Gas Cartridge NOT Included.

Sievert 253501 UK Powerjet Blowtorch Only - Fits M14 x 1.5 Burner Inculded: 870601.Burner Diameter: 14mm.Gas Consumption: 170g/h at 2 bar.Effect: 2.2kW.Connection: M14 x 1.5. Gas Cartridge NOT Inculded.

The Sievert 2295 Easyjet Gas Torch has a unique 1 bar regulator for cartridge pressure control. A fixed medium burner is supplied with the torch and modifications help prevent flare-ups when used upside down. It has precise flame adjustment and comes supplied with a 2204 cartridge Propane/Butane mix. It has a 0.9kW output for soldering up to 22mm pipe. It will fit EN417 self-sealing cartridges and is very compact when used with a 2203 cartridge.

The Sievert 2282 Handyjet Blowtorch is a multi-purpose torch which is suitable for various applications. These include heating, soldering/brazing and paint stripping. The handyjet has a 20mm diameter burner with built-in anti-flare, meaning that it can be used at any angle without flare-ups. In addition, it features piezo ignition, along with superior flame adjustment and an ergonomic comfort grip. Supplied with a Sievert 2203 disposable gas cartridge.

The Sievert 221093 Pierceable Butane Gas Cartridge is supplied without a valve. It complies with EN417 Regulations. Contains 100% Butane Size: 190g