The Arctic Hayes Vortex Mini Fine-Flame Brazing Torch is the smallest and most compact of the Vortex range. Easy-to-use, thanks to the auto-ignition, adjustable flame and anti-flare feature. The burner tube is made from stainless steel. Designed for use with Vortex Map-X and Propane gas.

Arctic Hayes Vortex Propane Gas is cooler than Vortex Map-X which makes it ideal for everyday plumbing work and soldering fittings. Suitable for most CGA600 threaded torches.

The Arctic Hayes Vortex Map-X is designed to burn at higher temperature than traditional propane and butane gases. Suitable for all soldering and brazing applications. Suitable for most CGA600 threaded torches.

The Arctic Hayes Tap Washer Kit contains a large selection of washers that are ideal for general plumbing. The washers are made from fibre and are supplied in a compartment case for easy identification. Contains the following: 55 x Vacca Flat Washers: 3/8in, 1/2in, 5/8in and 3/4in 15 x Vacca Dome Washers: 1/2in and 3/4in 30 x Dome Delta / Arm Washers: 1/2in and 3/4in 20 x Tantofex Tap Washer: 1/2in and 3/4in 50 x Cap Lining Fibre Washers: 1/2in and 3/4in

The Arctic Hayes Surface Protector is foam backed making it ideal for protecting all work surfaces, especially kitchen worktops. The anti-slip mat is waterproof and highly absorbent. Resistant to oil, water, bleaches, detergents and more.

This Arctic Hayes Gas Leak Detector is a brush on, non-flammable, non-corrosive gas leak fluid for detection of leaks in joints, connections etc. Safe for use on oxygen pipes. Complies with requirements of BS EN 14291:2004.

Arctic Hayes Gas Leak Detector Fluid has been specially formulated to trace positive pressure leaks in pipelines and fittings. It has a non-flammable and non-corrosive formula, suitable for use on gas, air and nitrogen leaks. The micro-porous foam instantly highlights the smallest of leaks, safe to use in confined areas. There is a brush-on applicator in bottle cap. Meets requirements of BS EN 14921:2004.

Arctic Hayes Gas Leak Spray is non-flammable and non-corrosive. Use to detect leaks in joints, connections, etc. Safe for use on oxygen pipes. Complies with BS EN 14291:2004.

The Arctic Hayes Standard 13g Smoke Pellets offer a 40 second burn time and produce 18m³ of white smoke. Supplied in a tube of 6 pellets.

The Arctic Hayes Fibre Washer Kit contains a large selection of washers that are ideal for general plumbing. The washers are made from fibre and are supplied in a compartment case for easy identification. Contains the following: 270 x Red Fibre Washers: 9 x 6.4mm, 12.6 x 8.3mm, 16 x 10mm, 17.5 x 11.5mm, 19 x 13.5mm, 22 x 14.6mm and 22 x 17mm35 x Fibre Washers: 1in, 1/2in and 3/4in15 x Ball Valve Seating Washers: 1/2in and 3/4in10 x Top Body Washers: No. 3 and No. 4

The Arctic Hayes Plumber's Essential Washer Kit contains an assortment of 9 of the most commonly used sizes. Handy pack to keep in a work van or in the home. Contains: 30 x Fibre Washers Y.I.F: 1/2in20 x MT Ball-Cock Washers: 1/2in20 x Fibre Ball Valve Seat Washers: 1/2in10 x Rubber Bottle Trap Washers: 1.1/4in and 1.1/2in50 x Cap Lining Washers: 1/2in and 3/4in20 x Rubber Shower Flex Washers: 1/2in10 x Washing Machine Hose Washers: 3/4in35 x Fibre Flexi Tap Con Washers: 1/2in and 3/4in15 x Compression Olives: 15mm and 22mm

The Arctic Hayes DT1 Radiator Drain Tray Kit is simple and easy to use with step-by-step detailed instructions included. With a universal application for 8, 10, 15 and 22mm pipework. Helps to avoid unnecessary mess and damage to floors to carpets. Perfect for professional use or DIY. Contains the following: 1 x Draining Tray4 x Water Diverting Collars4 x Reusable Sealing Straps1 x Water-resistant Barrier Gel (sufficient for 6-8 applications)

The Arctic Crack-It Shock Freeze Release Spray releases seized and corroded parts through shock freezing. The freeze action breaks the corrosion seal and allows the penetrant to reach the corroded area, releasing the seized items in 1-2 minutes. Also helps to prevent future corrosion and is completely bio-degradable.

The Arctic Hayes Ball Valve Washer Kit contains an assortment of commonly used bits. Handy pack to keep in a work van or in the home. Contains: 20 x Black Ball Tap Washers: 1/2 x 1/8in and 3/4 x 1/8in40 x Red Ball Tap Washers: 1/2 x 1/8in and 3/4 x 1/8in3 x White High Pressure Seats3 x Red Low Pressure Seats20 x Fibre Ball Seat Washers: 1/2in10 x Cotton Pins: 1/8 x 7/8in and 7/8 x 3/16in5 x Diaphragm Washers: 1.1/4in2 x Armstrong Diaphragm Washers2 x Torbeck Diaphragm Washers1 x Fluid Master Seal

The Arctic Hayes Digital Differential Pressure Meter is ideal for domestic tightness testing. Has a digital back lit display that can show gauge or differential pressure in 11 different pressure units: mbar, psi, inches, H2O, bar, kPa, inHg, mmHg, ozin, ftH2O and kgcm. Other features include: a record function for holding measurements, max/min pressure feature, auto power off and a low battery indicator. Specification Pressure Ranges: 0 - 138mbar, 0 - 55.4 inches H20, 0 - 1410mm H20, 0 - 2psi, 0 - 0.138bar.

The Arctic Hayes U-Flow Water Gauge has an innovative design. The clear, see-through body allows the gauge to be easily read. It has opposing flow-rate measures on each side of the body, so you can measure the flow rate in litres or gallons per minute. This is a vital piece of equipment when preparing a new installation. Simple to read and easy-to-use, this is a must-have for plumbers. Compatible with the 998731 stem thermometer for water temperature testing. Specification: Flow Measure Range: 4-22 litre, 1-5 gallon

1 x Arctic Hayes Silicone Grease 500g Tub

1 x Arctic Hayes Silicone Grease 100g Tube

Arctic Hayes Gas Cock Grease has been specially designed for fittings exposed to industrial and domestic gases and chemicals. Suitable for gas cocks, taps and valves. It is highly recommended as a pipe jointing compound, sealant and thread lubricant for flange and screw fittings exposed to many industrial and domestic gases. GC300 - purpose made for the gas industry. Resistant to natural gas and LPG. Specification: Temperature Range: -10C to160C

The Arctic Hayes Rapid Radrain Radiator Draining Kit will drain a radiator in just 15 minutes compared to 45 minutes when using other methods. Clean and quick, it helps avoid unnecessary mess and damage to floors and carpets from spillage. The water drains into a strong, reusable plastic bag. The bag can then be disconnected and drained easily. The bag will hold approx. 15 litres of water. For maximum protection always work with plumb-pads or absorbent sheeting.

1 x Arctic Hayes Drain Down Hose 15m

1 x Arctic Hayes Drain Down Hose 10m

The Arctic Hayes Plumber's O-Ring Kit contains a wide selection of the most commonly used sizes. Supplied in a quality carry/storage compartment box. Contains: 12 of each size: 22 x 1.8mm, 14 x 2.65mm, 24 x 1.8mm, 26 x 2.65mm, 27 x 2.65mm, 32 x 2.65mm, 30 x 3.5mm, 22 x 2.65mm, 29 x 3.5mm and 33 x 1.8mm 24 of size: 29 x 2.65mm

The Arctic Hayes Plumbers Washer Kit contains a selection of rubber and fibre washers of the most popular sizes in a handy storage/carry case. Supplied with 12 pieces of each size: 16.5 x 6mm, 24 x 11mm, 19.5 x 5mm, 15.5 x 4mm, 12 x 4mm, 32 x 5mm, 19 x 10mm, 19 x 11mm, 24 x 15mm, 22 x 12mm, 18 x 15mm and 24 x 20mm.

The Arctic Hayes Smoke-Sticks™ Kit comes with: 1 x Smoke-Pen3 x Smoke-Sticks™

1 x Arctic Hayes Smoke-Sticks™ Refill Pack of 3

Arctic Hayes 'Strikes' Smoke Matches are ideal for spillage testing on gas appliances or initial flue draw testing. Clean to use with no residue and cool to the touch after burning. They have a 20 second burn time and each match produces about 0.75m³ of dense smoke. Great value pack of 25 comes in a protective resealable tub.

Monument Internal / External Pipe End Deburrer is capable of deburring pipes up to 35mm in diameter.

Suitable for both 268 and 289 pipe slices 15 mm and 22 mm copper tube and MON 240C and MON 303 21 mm and 28 mm. Pack colour. Red. Packs are colour coded according to use.

The Monument 2059M Multi-Purpose Four-Way Key is used for gas, water and electric meter cupboards, air conditioning units, stop valves, mains consoles etc, as well as central heating pump cocks, some radiator and drain off valves.

The Monument 2036T Olive Puller is ideal for removing olives from copper piping without damaging the attached pipe. Suitable for 15mm and 22mm copper pipe. This puller simply utilises the compression fitting locking nut to remove the olive from the tube. With all the major parts of the tool turned from brass, this olive puller provides a quick and reliable remedy to removing most olives. Made in Britain.

Monument MON1722 Autocut Pipe Cutter. Size: 22mm.

Monument MON1715 Autocut Pipe Cutter. Size: 15mm.

Boss White is well known as a non-poisonous pipe jointing compound which is clean and easy to apply. It acts as a lubricant whilst the joint is being assembled and tightened, it does not set hard enabling easy dismantling for subsequent alterations to the pipework. Boss White conforms to BS6956 Part 5. The compound is lead free and incombustible and will not deteriorate, being suitable for use on compressed air, natural gas, steam, non-potable hot and cold-water services. Size: 400g.Temperature: -10?C to284?C.Pressure: 20 bar water.Colour: Buff.

Faithfull P.T.F.E Tape is used by plumbers and heating engineers to provide a watertight seal on threaded joints. This invaluable tape is an essential component when working on all types of pipework, helping to ensure that a watertight seal is achieved and maintained on all threaded joints. Suitable for use on oil and fuel lines. This effective tape is a must for every toolbox. Satisfies BS 7786:2006 and BS 6920-1:2000 . WRAS Approved for portable water. Specification Width: 12mmLength: 12mPack Size: 10

The Faithfull 4-Way Services Utility Meter Key is made from chrome vanadium steel for strength and durability. It features four popular key shapes: square, triangular and two-way. Suitable for use on radiator taps, gas and electricity meter doors. An essential item for many tradesmen.

The Faithfull Radiator Keys are used for venting excess air from radiators, these traditional radiator keys are a handy item for storing in a toolbox or kitchen drawer. Faithfull Radiator Keys - Brass (card 2)

The Faithfull PDRWCPL is designed for use within the toilet bowl, this plastic bellow plunger is shaped to force a powerful jet of water directly at a blockage within the main bend of the toilet pan. Unlike a drain auger the plunger has no hard moving parts so there is no chance of scratching the pan. Simple and easy to use, this tool is the first to grab when tackling a blocked toilet, manufactured from durable plastic it is easily cleaned and is fitted with a removable handle for storage.No chemicals are required to help remove the blockage, making this a safe and environmentally friendly product. Overall length: 530mm (20.3/4in).

The Faithfull PDRLARGPL is ideal for tackling blockages around the home and workplace in basins, baths and sinks. With a bellow action for increased pressure, it is safe and easy to use and clean, with a removable handle for storage. No chemicals are required to help remove the blockage, making this a safe and environmentally friendly product. Size: 125mm (5in).Overall length: 450mm (17.3/4in).

These Faithfull drain rods can be used to clean and remove obstructions from most domestic 100mm (4in) underground drainage pipes. The set consists of ten flexible, screw together rods which can reach up to 9 metres in length when fully assembled. Each 920mm polypropylene drain rod has crimped and pinned rustproof connectors for extra strength, and is supplied complete with a 100mm rubber plunger, and a 50mm double worm screw. N.B ALWAYS ROTATE DRAIN RODS IN A CLOCKWISE DIRECTION.

The Faithfull Basin Wrench 15mm (1/2in) and 22mm (3/4in) is manufactured from malleable cast iron with accurately machined jaws. Ideal for use in awkward places, eg. backnuts fitted to taps behind sinks or baths.

For professional people who require their tools to be at hand on a regular basis, this purpose designed set comes complete with a heavy-duty blue waterproof Bailey carry bag and supplied with adjustable shoulder straps. The compact nature of this set allows them to be easily stored in the works, shed, garage or van. This Universal Drain Rod set includes 30 feet of the Bailey Blue Rods with brass fittings. The quality, reliability and strength of this equipment ensures that the toughest jobs can be tackled - an essential product for the builder, plumber, chimney sweep or handyman. Contains: 10 x Blue Rods 3ft x 3/4in 1 x Plunger 4in1 x Drop Scraper 4in1 x Double Worm Screw

The Bahco BAH306PACK twin pack contains sizes 15mm and 22mm.

Bolt Cutters Length 450Mm - Jaw 6Mm

The Wiss Easysnip Utility Shears are perfect for workshop, garden and craft projects. It is fitted with spring loaded, bi-material handles for ease of use, especially with repeated cuts. There is a wire cutter notch to hold light gauge wire and a side lock for safe storage when not in use. Size: 216mm (8.1/2in).

Replacement Spring to suit WISS M1/M3/M5R.

The Wiss M-7R Metalmaster Compound Snips have offset blades, to keep the material away from hands, allowing straight or circle cuts to be made easily. Will cut up to 1.2mm thick mild steel. Green vinyl grips. Cuts right and straight. Specification Size: 235mm (9.1/4in).Blade Length: 32mm (1.1/4in).Capacity: Low Carbon Steel: 18 Gauge/1.22mm.

The Wiss M-6R Metalmaster Compound Snip has offset blades to keep the material away from hands, allowing straight and circle cuts to be made easily. Will cut up to 1.2mm thick mild steel. Red vinyl grips. Cut left and straight. Specification Size: 235mm (9.1/4in).Blade Length: 32mm (1.1/4in).Capacity: Low Carbon Steel: 18; Gauge/1.22mm.

The Wiss M-3R Metalmaster Compound Snips have self-opening, non-slip, serrated jaws for rapid cutting. They are hot drop-forged from special molybdenum steel with comfortable colour coded, yellow vinyl grips. The snips are fitted with compound lever action handles that are light and easy to handle, even when cutting tight curves. There is also a convenient protective safety latch. Cuts straight (or wide curves left or right in light stock) up to 1.2mm mild steel. Size: 248mm (9.3/4in).Cutting Type: Straight Cut/Curves.Capacity: Low Carbon Steel: 18 Gauge/1.22mm

The Wiss M-2R Metalmaster Compound Snips have self opening, non-slip, serrated jaws for rapid cutting. They are made from hot drop forged molybdenum steel with comfortable colour coded vinyl grips (green right hand/straight). They have compound lever action handles that are suitable for heavy stock, even when cutting tight curves. Cuts right from tight curves to straight up to 1.2mm mild steel. The snips have a convenient, protective safety latch. Specification Size: 248mm (9.3/4in).Capacity: Low Carbon Steel: 18 Gauge/1.22mm.Cutting Type: Right Hand/Straight Cut.

The Wiss M-1R Metalmaster Compound Snips Left Hand/Straight Cutting have self opening, non-slip, serrated jaws for rapid cutting. They are made from hot drop forged molybdenum steel and are fitted with comfortable colour coded vinyl grips. Can cut straight or left hand. Specification Size: 248mm (9.3/4in).Capacity: Low Carbon Steel: 18 Gauge/1.22mm.Cutting Type: Left Hand/Straight Cut.

The IRWIN Vise-Grip 3 piece set comprises of: 2 x Curved Jaw Locking Pliers, ideal for a variety of applications and material shapes. They are made from high-grade heat-treated alloy steel for maximum toughness and durability. The hardened teeth are designed to grip from any angle. The pliers classic trigger release provides maximum locking force. The hex key adjusting screw tightens to adjust pressure and draw materials together and also provides a controlled release. 10WR: Length: 254mm (10in), Capacity: 48mm.5WR: Length: 127mm (5in), Capacity: 29mm. 1 x Locking Long Nose Pliers, they have a powerful locking action. The jaws are long enough to reach into tight spots, whilst the tips are small enough to grip tiny objects. The pliers also incorporate a wire cutter. 6LNC: Length: 150mm (6in), Capacity: 51mm.

The IRWIN Vise-Grip Set of 2 Fast Release™ Locking Pliers contains the following: 1 x 6LN Fast Release™ Long Nose Locking Pliers are ideal for delicate work, hobbies, tight spaces, electronics and clamping of small parts. Have a built-in wire cutter. Length: 150mm (6in), Capacity 51mm. 1 x 10WR Fast Release™ Curved Jaw Locking Pliers that provide a better fit around curved work shapes. Have a built-in wire cutter, for a variety of applications and material shapes. Length: 254mm (10in), Capacity: 48mm.

IRWIN Vise-Grip 3 Piece Fast Release™ Locking Plier Set supplied in a handy carry pouch, contains the following: 1 x 7R Fast Release™ Straight Locking Pliers have heavy-duty jaws that allow for maximum contact for all work shapes both flat and square. Featuring a solid steel head that makes this tool twice as strong as all other locking pliers. Length: 178mm (7in), Capacity: 38mm. 1 x 9LN Fast Release™ Long Nose Locking Pliers are ideal for delicate work, hobbies, tight spaces, electronics and clamping of small parts. Have a built-in wire cutter. Length: 229mm (9in), Capacity: 70mm. 1 x 10WR Fast Release™ Curved Jaw Locking Pliers that provide a better fit around curved work shapes. Have a built-in wire cutter, for a variety of applications and material shapes. Length: 254mm (10in), Capacity: 48mm.

This Set of 2 Irwin Vise-Grip Fast Release™ Curved Jaw Locking Pliers, contains the following: 1 x 7WR: Length: 175mm, Capacity: 38mm. 1 x 10WR: Length: 250mm, Capacity: 48mm.

These IRWIN Vise-Grip Fast Release™ Long Nose Locking Pliers have the following specifications: Length: 229mm (9in).Capacity 70mm.

These IRWIN Vise-Grip Fast Release™ Long Nose Locking Pliers have the following specifications: Length: 150mm (6in).Capacity 51mm.

These Irwin Vise-Grip Fast Release™ Curved Jaw Locking Pliers have the following specification: Length: 178mm (7in). Capacity: 38mm.

These Irwin Vise-Grip Fast Release™ Curved Jaw Locking Pliers have the following specification: Length: 254mm (10in). Capacity: 48mm.

These Irwin Vise-Grip Fast Release™ Curved Jaw Locking Pliers have the following specification: Length: 127mm (5in). Capacity: 29mm.

These Irwin Vise-Grip Fast Release™ Curved Jaw Locking Pliers have the following specification: Length: 178mm (7in).Capacity: 38mm.

These Irwin Vise-Grip Fast Release™ Straight Jaw Locking Pliers have the following specification: Length: 178mm (7in).Capacity 38mm.

Irwin Vise-Grip 10R Fast Release™ Straight Jaw Locking Pliers. Length: 254mm (10in).Capacity: 48mm.

These Irwin Vise-Grip Long Nose Locking Pliers have the following specification: Length: 229mm (9in).Capacity: 73mm (3in).

These Irwin Vise-Grip Straight Jaw Locking Pliers have the following specification: Length: 178mm (7in).Capacity: 38mm.

These Irwin Vise-Grip Long Nose Locking Pliers have the following specification: Length: 150mm (6in).Capacity: 51mm (2in).

These Irwin Vise-Grip Curved Jaw Locking Pliers have the following specification: Length: 127mm (5in).Capacity: 29mm.

This Irwin Vise-Grip Locking Wrench has the following specification: Length: 100mm (4in).Range: 7 -14mm.

The IRWIN Vise-Grip Max Leverge End Cutting Pliers feature PowerSlot Technology, that provides 2X more power and half the cutting effort. They are constructed of high-quality steel and are specially coated for superior rust-resistance and longer tool life. The induction-hardened cutting edges are durable enough to cut ACSR, nails, screws and even piano wire without damaging the cutting edge. They are fitted with industry-leading, three-zone comfort grips that have been contoured for optimal cushion and control allowing the user to make more cuts comfortably. Integrated handle hooks for the Performance Lanyard system, for safer elevated working conditions and easier retrieval when stored. They are made in Germany and backed by IRWIN's Lifetime Guarantee. Capacity: 3mm Hard Wire.

The IRWIN Vise-Grip Bent Nose Pliers are constructed of high-quality steel and are specially coated for superior rust-resistance and longer tool life. The induction-hardened cutting edges are durable enough to cut ACSR, nails, screws and even piano wire without damaging the cutting edge. They are fitted with industry-leading, three-zone comfort grips that have been contoured for optimal cushion and control allowing the user to make more cuts comfortably. Integrated handle hooks for the Performance Lanyard system, for safer elevated working conditions and easier retrieval when stored. They are made in Germany and backed by IRWIN's Lifetime Guarantee. Capacity: 2mm Hard Wire.

The IRWIN Vise-Grip ErgoMulti Long Nose Pliers have a 62 ergonomic angled head for reduced wrist strain and are constructed of high-quality steel. They have been specially coated for superior rust-resistance and longer tool life. The induction-hardened cutting edges are durable enough to cut ACSR, nails, screws and even piano wire without damaging the cutting edge. There is also a built-in wire stripper, that strips 12AWG and 14AWG (solid) wire. They are fitted with industry-leading, three-zone comfort grips that have been contoured for optimal cushioning and control allowing the user to make more cuts comfortably. Integrated handle hooks for the Performance Lanyard system provide safer elevated working conditions and easier retrieval when stored. They are made in Germany and backed by IRWIN's Lifetime Guarantee. Capacity: 2mm Hard Wire.

IRWIN Vise-Grip Standard Long Nose Pliers have the following specification: Size: 200mm (8in).Capacity: 2mm Hard Wire.

IRWIN Vise-Grip Standard Long Nose Pliers have the following specification: Size: 150mm (6in).Capacity: 2mm Hard Wire.

These Irwin Vise-Grip Straight Jaw Locking Pliers have the following specification: Length: 254mm (10in).Capacity: 48mm.

This Irwin Vise-Grip Locking Wrench has the following specification: Length: 254mm (10in).Range: 16 -28mm.

The IRWIN Vise-Grip 10508154 Construction Nippers have an induction hardened chrome nickel steel cutting face that stays sharper for longer and improves durability. They also feature machined jaws that provide maximum gripping strength, whilst the moulded ProTouch grips add comfort and improve user experience. Length: 225mm (9in).

The Visegrip Irwin VIS10508152 Nipper Pliers come in the following Length: 175mm (7in).

The IRWIN Vise-grip 10508151 Nipper Pliers come in the followingLength: 200mm (8 inch).

This Irwin Vise-Grip 3 Piece Curved Jaw Locking Plier Set contains the following: 1 x 5CR Curved Jaw Locking Pliers 127mm (5in) 1 x 7CR Curved Jaw Locking Pliers 178mm (7in) 1 x 10CR Curved Jaw Locking Pliers 254mm (10in)

These Irwin Vise-Grip Curved Jaw Locking Pliers have the following specification: Length: 125mm (5in).Capacity: 29mm.

These Irwin Vise-Grip Curved Jaw Locking Pliers have the following specification: Length: 254mm (10in).Capacity: 48mm.

These IRWIN Vise-Grip Universal Water Pump Pliers have the following specification: Length: 300mm (12in)Max. Jaw Capacity: 70mm

These IRWIN Vise-Grip Universal Water Pump Pliers have the following specification: Length: 250mm (10in)Max. Jaw Capacity: 57mm

These IRWIN Vise-Grip Universal Water Pump Pliers have the following specification: Length: 200mm (8in)Max. Jaw Capacity: 45mm

These IRWIN Vise-Grip Universal Water Pump Pliers have the following specification: Length: 150mm (6in)Max. Jaw Capacity: 29mm

The VIS10507629 IRWIN Vise-Grip Groovelock Water Pump Pliers 300mm (12 inch) ProTouch™Handle have the following technical specifications:Capacity: 69mm. Groove positions: 19.Length: 300mm (12 inch).

The ViseGrip IRWIN VIS10507628 Groovelock Water Pump Pliers ProTouch™ Handle have the following specifications:Capacity: 56mm. Groove positions: 16.Length: 250mm (10 inch).

The VIS10507627 Irwin Vise-Grip Groovelock Water Pump Pliers 200mm (8 inch) ProTouch™ Handle have the following technical specifications:Jaw Capacity: 44mm. Groove positions: 13. Length: 200mm (8 inch).

The IRWIN VIS10507626 Groovelock Water Pump Pliers 150mm (6 inch) ProTouch™ Handle have the following specifications:Jaw capacity: 29mm.Groove positions: 11.Length: 150mm.

IRWIN Vise-Grip combination pliers have an induction hardened chrome nickel steel cutting face that stays sharper for longer and improves durability. Machined multi-grip jaws for maximum gripping strength. Moulded ProTouch™ grips for comfort and less hand fatigue. 180mm (7in) and 200mm (8in) are high leverage handled.1 x IRWIN Vise-Grip High Leverage Combination Pliers 200mm (8in)

1 x IRWIN Vise-Grip VDE Combination Pliers - High Leverage 200mm

1 x IRWIN Vise-Grip VDE Combination Pliers 150mm

IRWIN Vise-Grip VDE wire strippers have a chrome nickel steel, induction hardened cutting edges that stay sharper for longer and improved durability. Machined jaws provide maxium grip strength. They are fully TÜV, GS, and VDE certified meaning they are safe for working with electrical equipment upto AC 1000 volts or DC 1500 volts. Featuring moulded, pull-resistant one component handles for added comfort and less hand fatigue. Will strip cable up to 6 mm in diameter. Length: 150mm (6 in)

IRWIN Vise-Grip VDE pliers have a chrome nickel steel, induction hardened cutting edges that stay sharper for longer and improved durability. Machined jaws provide maxium grip strength. They are fully TÜV, GS, and VDE certified meaning they are safe for working with electrical equipment upto AC 1000 volts or DC 1500 volts. Featuring moulded, pull-resistant one component handles for added comfort and less hand fatigue. Length: 200mm (8 in).

IRWIN Vise-Grip Long Nose VDE pliers have a chrome nickel steel, induction hardened cutting edges that stay sharper for longer and improved durability. Machined jaws provide maxium grip strength. They are fully TÜV, GS, and VDE certified meaning they are safe for working with electrical equipment upto AC 1000 volts or DC 1500 volts. Featuring moulded, pull-resistant, one component handles for added comfort and less hand fatigue.Length: 200mm (8 in).

Length: 200mm (8 in).

Length: 175mm (7in).

Length: 150mm (6in)

Set of 3 IRWIN Vise-Grip VDE Pliers that are fully TUV, GS, and VDE certified meaning they are safe for working with electrical equipment up to AC 1000V or DC 1500V. They have a chrome nickel steel, induction hardened cutting edges that stay sharper for longer and improved durability. Machined jaws provide maxium grip strength. Featuring moulded, pull-resistant one component handles for added comfort and less hand fatigue. VDE Diagonal Cutting Pliers: Length: 150mm (6in).VDE Long Nose Pliers: Length: 200mm (8in).VDE Combination Pliers: Length: 175mm (7in).

The IRWIN Vise-Grip Cable Cutters have an induction hardened cutting face and are made from chromium nickel steel for improved durability on the gripping and cutting face. Fitted with moulded 2-component handles. They can cut copper and aluminium cables up to 5mm in diameter.