The Monument 1012R Side Entry Manhole Keys have been designed for lifting light duty (pressed steel) manhole covers. These keys are made from 10mm steel bar and the simple 90 degree bent ends allow these keys to be used in a large number of different manhole types. Pack Quantity: 2

The Monument 1010 are manufactured from a single piece of malleable iron for greater durability and strength, with a tee handle for greater torque and added leverage, and a D-shaped end that fits snug in to most manhole covers for easy and secured lifting. Designed to make the removal of manhole covers an easier operation. Made with a 100mm (4in) handle and a 125mm (5in) shaft. Pack Quantity: 2

Pack of 5 replacement blades for the Monument AC4P Autocut for Plastic Pipe Cutters.

Voltage 240V

Voltage 110V

Monument Drain Cutter Beveller is suitable for use by right or left-handed users. It will cut and bevel plastic soil and drain pipes as short as 100 mm. Removal of the leg enables the cutter to be used in a confined space or alternatively screwed or bolted to a heavy board or timber on muddy sites. Supplied complete with a replaceable long-life steel cutting blade. For cutting and bevelling 110 mm plastic soil and drain pipes.

Monument General wire spring Flexicore drain snakes. Replacement cable for Super-Vee, Power-Vee, Handylectric and PH Drain Rooter. All the General Wire Spring electromechanical drain cleaners should use Flexicore wire rope centre cables. Heavy-duty wire is coiled around 42-strand wire rope and heat treated. The cables are of high strength and correct flexibility. The electromechanical drain cleaning cables are left hand wound. 25ft. x 1/4in. cable with EL Basin Plug Head. Weight 3 kg.

1068I: Scoop 90mm (3.1/2 in) dia.

Scoop 135mm (5.1/4 in). dia.

37mbar 1.5Kg/H Propane 27mm regulator - clip on (patio). It has a reinforced diaphragm and is ideal for BBQ's and Patio Heaters. Conforms to EN12864 standards. Propane: 1500g/h.Max Inlet: 16mbar.Max Outlet: 37mbar.CIK CLIP/R-27ZID HNZ-10-EN.

28mbar 1.3kg/h Butane 21mm regulator - clip on.Conforms to EN12864.Butane: 1300g/h.Max inlet: 0.3-7.5mbarMax outlet: 28mbar.CIA: G.53/D21.ZID: H-50/D8.

The Milwaukee M18 FFSDC16 Fuel™ Drain Cleaner has a brushless POWERSTATE™ motor with an integrated drum brake that slows the machine within 3 seconds. A large, non-slip foot pedal for total control even on wet surfaces. The modular design utilises backpack straps for the easiest transport to any roof, drain, crawl space, or clean out. The tool-free drum connection allows users to quickly interchange between cable sizes, or add a second drum to reach a length of 30m. SWITCH PACK™ drums are fully enclosed to provide the best protection and containment of the mess. REDLINK PLUS™ intelligence system delivers an advanced digital overload protection for tool and battery and uniquely enhances the tool performance under load. Compatible with other brands of 8, 10 and 13mm inner core cables and 16mm open wind cables. Supplied with: 1 x Backpack Assembly1 x Drum Assembly1 x 13mm x 15m Cable1 x 5 Piece Attachment Set Bare Unit, No Battery or Charger Supplied Specification: No Load Speed: 0-250/min.Max. Drain Diameter: 100mmSpiral Diameter: 13mmCable Length: 15m

The Milwaukee M18 FFSDC10 Fuel™ Drain Cleaner has a brushless POWERSTATE™ motor with an integrated drum brake that slows the machine within 3 seconds. A large, non-slip foot pedal for total control even on wet surfaces. The modular design utilises backpack straps for the easiest transport to any roof, drain, crawl space, or clean out. The tool-free drum connection allows users to quickly interchange between cable sizes, or add a second drum to reach a length of 30m. SWITCH PACK™ drums are fully enclosed to provide the best protection and containment of the mess. REDLINK PLUS™ intelligence system delivers an advanced digital overload protection for tool and battery and uniquely enhances the tool performance under load. Compatible with other brands of 8, 10 and 13mm inner core cables and 16mm open wind cables. Supplied with: 1 x Backpack Assembly1 x Drum Assembly1 x 10mm x 15m Cable1 x 5 Piece Attachment Set Bare Unit, No Battery or Charger Supplied. Specification: No Load Speed: 0-250/min.Max. Drain Diameter: 75mmSpiral Diameter: 10mmCable Length: 15m

The Milwaukee Hand Tools Ratcheting PVC Cutter has a max. 63mm cutting capacity in tube and pipe.

The Milwaukee Hand Tools Ratcheting PVC Cutter has a max. 42mm cutting capacity in tube and pipe.

This Milwaukee Hand Tools Constant Swing Copper Tube Cutter has a max. 16-67mm cutting capacity in copper pipe.

This Milwaukee Hand Tools Constant Swing Copper Tube Cutter has a max. 3-42mm cutting capacity in copper pipe.

This Milwaukee Hand Tools Mini Copper Tube Cutter has a max. 3-28mm cutting capacity in copper pipe.

This Milwaukee Hand Tools Mini Copper Tube Cutter has a max. 3-15mm cutting capacity in copper pipe.

This Milwaukee Hand Tools Adjustable Basin Wrench has the following specification: Capacity: 32-65mm

This Milwaukee Hand Tools Adjustable Basin Wrench has the following specification: Capacity: 10-32mm

Replacement V-shaped stainless steel blade. For use with the MHT48224202 Plastic Cutter. Allows quick and straight cuts; prevents crushing of material.

The Milwaukee Hand Tools Plastic Cutter cuts PEX, PB, MDP, PE, plastic electrical conduits, pneumatic pipe, plastic overflow pipe, rubber hoses and silicon hoses up to 25mm. V-shaped stainless steel blade allows quick and straight cuts; prevents crushing of material. Blade can be replaced. It has a robust metal core construction for maximum lifetime. Corrosion resistant head. Grooves on the head allow for stripping of couplings. The handles have ergonomic overmoulded grips for added comfort. Fitted with a one-handed locking mechanism, the tool remains closed while in pouch, spring loaded but easy opening. Specification: Max. Cutting Capacity: 25mm

Knipex TwistCut Corrugated Pipe Cutter for cutting empty or ready-assembled corrugated pipes to length, with a diameter of 13-32mm. The recessed blades prevent injuries and provide an exact flush cut, without damaging the internal cables. Cut on the outside of fluting, no sharp raw edge inside the corrugated pipe. The body is made from a stable polyamide compound plastic. With a slim and ergonomic shape for work in poorly accessible areas. Double-sided guide for a precise cut. Simple insertion of the corrugated pipe for reliable and simple cutting, no waste. In the case of thick-walled corrugated pipes, reapply after the circular cut just behind the cut and break off the corrugated pipe. Ideal for use in the electrical and construction trades and for plumbing work. Specification: Length: 100mmCutting Capacity : 13-32mm

The Knipex 90 20 Series Cutter for cutting thin walled plastic pipes (e.g. aluminium armoured plastic pipes), flexible plastic and rubber hoses up to 25mm diameter. The tool is made of tough fibreglass reinforced plastic for added strength and durability. With a blade made of high-strength special grade steel, that has been oil-hardened and tempered. They have exchangeable blade have opening spring and locking lever for added grip. Not suitable for cutting steel. Cutting Capacity: 25mm.

The Knipex 00 11 04 Profi-Key is suitable for all standard shut-off systems in the supply of gas, water and electricity for technical installations in buildings, e. g. heating, air conditioning and ventilation systems, shut-off valves,mains switch-boards, etc. Supplied with a securing chain. It has the following functions: 3 x Square: 5, 7 8mm.1 x Triangular: 9-10mm. 1 x Two-Way: 3-5mm.1 x Long Execution Conical Square: 6, 7, 8 9mm.1 x Double Ended Bit (Slotted 1.0x7mm and PH2).1 x 1/4in Bit Adaptor.

The Knipex 00 11 03 7-Way Cabinet Control Key is suitable for control cabinets and shut-off systems in the supply of gas, water and electricity. It is ideal for technical installations in buildings, such as air conditioning, ventilation systems, shut-off valves, mains switch-boards, etc. Supplied with a securing chain. It has the following functions: 3 x Square: 5, 6 8mm.1 x Triangular: 9mm. 1 x Two-Way: 3-5mm.1 x Double Ended Bit (Slotted 1.0x7mm and PH2).1 x 1/4in Bit Adaptor.

The Knipex 00 11 01 TwinKey Service Cabinet Key is designed for the actuation of locking systems from the areas of facilities engineering (heating and sanitation, air conditioning, electro technology), gas and water supply and shut-off-systems. Consists of two 4-way spider keys connected using magnets providing space saving storage. It has a weight-optimised, zinc die-cast design. It has the following functions: 4 x Square: 5, 6-7, 8-9 10-11mm.3 x Triangular: 7-8, 9-10 11-12mm.1 x Two-Way: 3-5mm.1 x Half-moon: 6mm.1 x Long Execution Conical Square: 6, 7, 8 9mm.1 x Reversible Bit (Slotted 1.0x7mm and PH2).

This IRWIN 10507485 PVC cutter has a simple one-handed ratcheting operation to provide smooth cutting, and clean pipe ends. The cutter's rubberised grips provide confident, safe handling. Capacity: 45mm.

IRWIN Hilmor GLM compact Bender with precision, high pressure aluminium, die cast formers and guides to produce sets, offsets, multiple bends etc., in tubes of a maximum diameter of 22mm. Particularly suitable for installation of small heating systems etc., and is supplied complete with 15mm and 22mm formers and guides. Capacities are: Copper BS2871 15-22mm; Stainless Steel BS4127 15mm; Mild Steel BS4152 15mm.

IRWIN Hilmor Diecast Aluminium Former for use with CM35, CM42, and K3B Pipe Benders (For copper, stainless and mild steel pipes). Size. 35mm

IRWIN Hilmor Die-cast aluminium formers for use with EL25 and EL32 pipe benders for conduit pipe.size 25 mm O.D.

IRWIN Hilmor Extruded Aluminium Guide for use with CM35, CM42, and UL223 Tube Benders. (For, copper, stainless steel and mild steel)Size. 28mm

Size. 22 mm O.D.

Size. 15 mm O.D.

This Campingaz THP3000PZ high-power gas torch is easy to use with its automatic Piezo ignition. It has ergonomic, multi-position handling for comfortable use and a high-quality metal nozzle. It is equipped with a wire stand to safely stand it in a horizontal position. The burner has a burning angle of 60. Specification: Max. Gas Consumption: 225g/hr.Flame Temperature: 1,800CRun Time: 1hr. 30min.Weight: 333g

The Campingaz Handy auto blowlamp has a highly ergonomic, shock-resistant polypropylene handle for comfortable use. With Piezo automatic ignition, it is extremely easy to light. Features a high-power brass burner and a gas flow rate control giving very fine flame adjustment. Support base included for stability. It can be operated off either the Campingaz CG1750 or CG3500 valve cartridges. Specification: Max. Gas Consumption: 175g/hr.Flame Temperature: 1,750CRun Time: 1hr. with CG1750Weight: 227g

The Campingaz Handy blowlamp has a highly ergonomic, shock-resistant polypropylene handle for comfortable use. Features a high-power brass burner and a gas flow rate control giving very fine flame adjustment. Support base included for stability. It can be operated with either the Campingaz CG1750 or CG3500 valve cartridges. Specification: Max. Gas Consumption: 175g/hr.Flame Temperature: 1,750CRun Time: 1hr. with CG1750Weight: 231g

The Campingaz TC 2000 blowlamp is compact and lightweight for easy use and storage. It comes complete with a CG1750 Butane/Propane gas cartridge and has a pivoting stand. Specification Max. Gas Consumption: 210g/h.Flame Temperature: 1,750CRuntime: 50 min with CG1750Weight: 180g

1 x Campingaz CV470 Plus Butane/Propane Gas Cartridge 450g

1 x Campingaz CV300 Plus Butane/Propane Gas Cartridge 240g

The Campingaz CP250 Isobutane Gas Cartridge contains high-performance Isobutane gas. This cartridge will work better at lower temperatures than other similarly styled cartridges. The CP250 cartridge can be removed and re-attached safely, even if not yet empty and will fit the Campingaz Camp Bistro 3 stove. Gas Weight: 220g

The Campingaz C206GLS Gas Cartridge contains a mixutre of Butane/Propane. It is fitted with a Gas Lock System to prevent the majority of residual gas escaping from the cartridge if accidentally disconnected. Caution: This Product is Highly Flammable. Gas Weight: 190g

This Campingaz 3500 Butane Propane Gas Cartridge has the following specification: Gas Weight: 350gTotal Weight: 515gDimensions: 256 x 66mm

This Campingaz 1750 Butane Propane Gas Cartridge has the following specification: Gas Weight: 175gTotal Weight: 280gDimensions: 143 x 66mm

Faithfull gas quality P.T.F.E (polytetrafluoroethylene) tape will provide a gas, air and water tight seal on threaded joints. This invaluable tape is an essential component when working on gas pipework. Suitable for use on BS21 threads up to 50mm (2in). It is non-adhesive, no need for messy compounds. It wont harden or dry out and is resistant to cracking, impermeable to ?20 bar and performs a lubricating function. Used in the plumbing and heating industries for sealing pipes, conduits, bolts, valves and threaded gas lines that carry all common gases such as air, oxygen, ammonia, butane, chlorine and hydrogen, and liquids such as water, propylene glycol, kerosene and diesel. This tape satisfies BGC IM/16 and is tested to EN751-3:1997. Supplied as a pack of 10 rolls.

The Faithfull Crutch Pattern Stopcock Key also has additional 1/2 and 3/4 in square valve fittings. Turning handle has one pointed end for lifting covers. Length 114cm (44.3/4in).

Faithfull L-Shaped Radiator Spanner for the installation and removal of radiator valves. With a grooved Hex section for internal lugged valves and a 10mm square section for radiator vent plugs and bleed screws. Zinc plated for rust protection.

The Faithfull Compression Fitting Spanner is a simple, pressed steel, double ended spanner for use on standard compression fitting nuts. Contents: 15mm pipe nut size 24mm.22mm pipe nut size 32mm.

The Faithfull Spanner Set consists of three double ended spanners and a tommy bar specifically designed for use on monobloc tap backnuts. Set contains: 3 x Box Spanners: 8 x 9mm, 10 x 11mm 12 x 13mm1 x Tommy Bar

The Faithfull Tap Backnut Spanner is a double ended box spanner used for the removal or fitting of brass and nylon tap backnuts on basins and baths. Supplied complete with a tommy bar. Spanner Sizes: 27mm and 32mm.

The Faithfull FAIPPC42PRO is a Professional Plastic Pipe Cutter for use in demanding environments. Made from heavy-gauge cast aluminium with a heavy-duty ratcheting mechanism.Fitted with a stainless steel blade and safety locking handle.The combination of a ratchet cutting action and a lopper blade makes these tools highly effective. The blade works against an anvil jaw which holds the pipe securely while pressure is increased. The ratchet mechanism maintains applied pressure so that the handles only need to be opened and closed a few times to complete a cut.Specification: Capacity: 3-42mm.

Capacity: 3-42 mm

This Faithfull Plastic Pipe Cutter is a handy non-ratcheting plastic pipe cutter, designed for quick and repetitive cutting when installing flexible plastic water pipe up to 28mm.The body of the cutter is manufactured from a hard-wearing Nylon and fitted with a high-performance 53HRC steel blade, to provide an easy clean cut each time. This lightweight tool is ideal for carrying around all day and features a safety lock when stored on tool belt or work trousers. Specification: Capacity: 3-28mm.

The Faithfull PDRWCAUG Deluxe Toilet Auger is designed for the fast unblocking of toilets. This safe and easy to use auger uses a flexible spring steel shaft with a barrel end which can be rotated to clear away blockages in toilet U bends and gullies. The auger features a vinyl sleeve helping protect the toilet bowl from scratches and has a handy clip for storing the spring steel shaft when not in use.No chemicals are required to help remove the blockage, making this a safe and environmentally friendly product. Specifications: Length: 900mm (35.1/2in).Diameter: 6.35mm (1/4in).

The Faithfull PDRSNAKE Drill Snake is a labour-saving drill auger (snake) designed for use on any variable speed electric or battery drill capable of holding a 1/4in hex shank. The auger is easy to use and will remove most types of blockages from household pipes and drains up to 50mm (2in) in diameter and is ideal for clearing basins, sinks, baths and waste pipes when plungers and chemicals fail to work.The 4.6m (15ft) x 6mm (1/4in) steel cable is encased in a wipe clean PE sleeve allowing the inner cable to spin freely when attached to a rotary drill, a built-in clutch will automatically engage if the cable becomes jammed.No chemicals are required to help remove the blockage, making this a safe and environmentally friendly product. Specification: Effective length: 4.6m (15ft).

The Faithfull PDRWCPL Mini Plunger is ideal for tackling blockages in small hand basins and sinks. This plunger is small and discreet, 115mm or 4.1/2in in diameter, and easily stored within a vanity unit or cabinet. It is safe and easy to use and clean.No chemicals are required to help remove the blockage, making this a safe and environmentally friendly product. Specifications: Size: 115mm (4.1/2in) diameter.Overall length: 180mm (7in).

The Faithfull HP20 is a high quality, easy to use, durable, Jet Pump Drain Unblocker using the power of water to unblock sinks, baths, basin and toilets. The Hydro Jet pump is supplied complete with three different shaped heads making it extremely versatile, enabling it to be used to clear many common pipe and drain blockages around the home.The small head is ideal for use on standard sinks and basins, the larger cupped head is for use on sinks with large plug recesses and also eliminates the need to remove awkward pop up plugs, which can be left in place if removal is not possible. The toilet adaptor is specially shaped to force water through the toilet pan to remove blockages.After use the hydro jet pump is simply cleaned out by drawing clean water into the unit three or four times and pumped to flush it out. No chemicals are required to help remove the blockage, making this a safe and environmentally friendly product.

The Faithfull PDRAUG25 Drum Auger is easy to use and designed to remove blockages from household pipes and drains when plungers and chemicals fail to work. The auger utilises a 7.6m/25ft x 6mm/1/4in flexible spring steel shaft with a barrel end that can be rotated to clear away blockages and is easily retracted into its case after use for safe storage.The auger has a sturdy plastic body manufactured from PE, ABS wipe clean plastic and features both an integral winding and pistol grip handle which help make the auger easy to use. Once fully retracted the spring steel shaft can be locked in place using the locking thumb screw.No chemicals are required to help remove the blockage, making this a safe and environmentally friendly product. Specifications: Cable length: 7.6m (25ft).Cable diameter: 6mm (1/4in).

A range of replacement pipe cutter wheels for pipe cutters are available, as a sharp blade will result in a better cut and more reliable connection. The Faithfull FAIPCW642 pipe cutter replacement wheels (set of 3) is compatible with PC642

For use with PC50 adjustable pipecutter.

Cuts copper, brass, aluminium and light gauge steel tube. For use with PC316, PC330, PC335 adjustable pipe cutters. Carded.

The Faithfull FAIPCCRW Pipe Slicer Cutting Wheels is a pack of 4 replacement wheels for the Copper Chopper Pipe Slicer.The Faithfull Copper Chopper is the perfect tool for making clean burr-free cuts in copper pipes and is also ideal for use in confined or awkward places as it can be operated while using only one hand. Specification: Pack Quantity: 4.

For use on 22mm copper pipe

For use on 15mm copper pipe

The Faithfull adjustable pipe cutter cuts copper, brass, aluminium and light gauge steel tube. It features a retractable de-burrer and has a steel wheel and rollers. The Faithfull FAIPC642 has a tube cutting capacity: 6 - 42mm outside diameter. Uses spare wheel FAIPCW642

Adjustable Heavy-Duty pipe cutter ideal for cutting steel tubing up to 50mm diameter. Uses spare wheel FAIPCW6002

Adjustable Cutter cuts copper, brass, aluminium and light gauge steel tube. Tube Cutting Capacity. 3 to 30mm. Uses spare wheel FAIPCW6001

The Faithfull Adjustable Cutter cuts copper, brass, aluminium and light gauge steel tube. Ideal for use in confined spaces. Tube Cutting Capacity. 3 to 16mm. Uses spare wheel FAIPCW6001

Size. 22mm.

Combination Tube Bender. Inner bend radius = 76mm Size.22mm. O D

Size. 15mm

Inner bend radius = 44mm Size.15mm. O D

The Faithfull PBM1522 Combination Pipe Bender is the ideal tool for the plumber, gas fitter or domestic heating engineer. It is capable of handling and bending 15 - 22mm O/D copper tube. While handheld it can be used in restricted spaces.Compact in design and easy to carry, the PMB1522 can also be held in a vice for the occasional use as a bench bender, and the leading arm has pre-set rollers for speed of operation. Specifications: Size: 15 and 22mm O/D copper tube.

2 x Faithfull Manhole Keys Manhole Keys 520mm (20.4in)

2 x Faithfull Manhole Keys Manhole Keys 320mm (12.5in)

2 x Faithfull Manhole Keys Manhole Keys 170mm (6.6in)

The Faithfull Mini Pipe Bender is pocket sized but powerful. The three-in-one former and guide are calibrated for setting out left, right or offset bends up to 90 on 6, 8 and 10mm outside diameter copper tubing. Purpose built for micro bore central heating and hydraulic pipes.

The Faithfull traditional lead dresser manufactured from straight grain seasoned beech timber. It has rounded corners and a raised handle grip to give plenty of knuckle room when hammering or shaping a large range of ductile materials.

This Faithfull Lead Dresser is used when moulding or dressing sheet lead, copper, zinc, aluminium and other ductile material.Lead dressers have rounded corners with a raised handle to provide sufficient clearance for the users knuckles when hammering.The lead dresser is durable, manufactured from tough high density plastic to withstand hammering on the top, or sides.Specifications: Weight : 450g.Face Dimensions: 50 x 170mm (2 x 6.3/4in).

The Faithfull Cranked Immersion Heater Spanner has been designed to provide a firm non-slip grip on immersion heater elements. The cranked head allows access to heaters that are surrounded by insulation or recessed. Manufactured from high-quality steel.

The Faithfull Box Type Immersion Heater Spanner provides a firm non-slip grip on immersion heater elements. The deep box design allows easy access to heaters that are surrounded by insulation or recessed. Supplied complete with a tommy bar to help provide added leverage when removing over tight elements. Manufactured from high-quality steel.

The Faithfull Flat Immersion Heater Spanner has been designed to provide a firm non-slip grip on immersion heater elements. Manufactured from high-quality steel.

The Faithfull Plumber's Soldering Pad is a high temperature, asbestos free protective heat pad for plumbing, brazing and soldering applications. Ideal for professional soft soldering, brazing and most other plumbing applications, this heavy-duty heat pad will provide protection to surfaces against burn marks and heat damage. For best results always insure the white side of the pad is facing towards the heat source and avoid direct flame contact with the surface of the pad for prolonged periods. If the surface of the pad begins to glow it should be moved slightly so that the flame is redirected to a previously unheated area. The pad also features an easy wipe clean back and has reinforced edging. Recommended for use with Butane, Propane and MAPP gas. Specification Max. Temperature: 1,200CSize: 195 x 300mm

The Faithfull Plumber's Soldering Mat is a high temperature, Asbestos free protective heat mat for plumbing and soldering applications. It is ideal for DIY and light trade use, including soft soldering and most plumbing applications. The heat mat withstands temperatures of up to 550C and will provide protection to surfaces against burn marks and heat damage. For best results, the flame should not come into direct contact with the surface of the mat for prolonged periods. If the surface of the mat begins to glow it should be moved slightly so that the flame is redirected to a previously unheated area. Always use the same side to face the flame to keep the reverse side clean against the surface being protected. If an area is to be exposed to heat for extended periods we recommended the use of two heat mats, layered for improved protection. May be used with both Butane and Propane. Specification Max. Temperature: 550CSize: 250 x 250mm

A robust steel cylinder fitted with a standard CGA600 connection. Higher pressure and hotter flame than mixed gas cartridges. Hot stable gas will provide a working temperature of up to 1520C in conditions down to minus 20C. Ideal for use when brazing or soldering large diameter copper pipes. To be used with FAIGZPROAUTO (Quick Pro Auto Power Torch) and the FAIGZPOWER (Power Torch) and other similar torches that use CGA600 valves.

The Faithfull Quick Pro Auto Power Torch is a powerful, high performance gas torch designed for the professional user and packed with all the features expected from a top of the range product. Features of this torch include automatic piezo ignition, an advanced gas control system that offers both a Dead Mans Handle function and a fine flame adjustment valve with an instant FLARESAFE function, making the torch safe to use at any angle immediately after start up. The burner head creates a swirl effect flame to help ensure that the flame is evenly distributed around a pipe when carrying out plumbing work. This ergonomic designed Swirl torch is ideally suited to skilled plumbing, soldering and brazing work. Specifications: Max. operating temperature: 1,610C.Optimum power output: 1,900 Watt.Gas consumption: 136 g/h.CGA600 Connection.Gas category: MAP/PRO.

The Faithfull Auto Start Blow Torch is a high temperature, all-purpose gas torch designed for home use. The blow torch has an automatic piezo ignition, fine flame adjustment valve and a rapid one minute warm up.The Faithfull torch has a highly ergonomic, shock-resistant polypropylene handle, making it comfortable to use.Suitable for use with Faithfull Tools Butane Propane Mix Gas Cartridges Part nos. FAIGZ350, FAIGZ170 (Not included).Supplied with a stability base. Applications:Soft Soldering, Aluminium Welding, Paint Stripping, Pipe Bending, Loosening Bolts, Defrosting Pipes, Brazing and Lighting Barbecues. Specifications:Max. operating temperature: 1600C.Optimum power output: 1,230 Watts.Gas consumption: 88 g/h.EN417 Connection.

This Faithfull Gas Converter connects a gas cylinders fitted with an EN417 self-sealing valve for use with blow torches with a CGA600 gas connection. Compatible with:FAIGZPROAUTO - Quick Pro Auto Power Torch. WARNING: Make sure the threads of the gas torch and bottle to be used are compatible with this adaptor. Do not use in other applications.

The Faithfull Auto Start Power Torch EN417 is a powerful gas torch designed primarily for use in plumbing and soldering applications. This torch has an automatic piezo ignition and a fine flame adjustment valve with an instant FLARESAFE function, this makes the torch safe to use at any angle immediately after starting up. The workstation neck is designed for hands free operation.It is suitable for use with Faithfull Tools Butane Propane Mix Gas Cartridges - Part nos. FAI GZ350, FAI GZ170 (not included).Supplied with a stability base. Specifications: Max operating temperature: 1,400C.Optimum power output: 1,450 Watt.Gas consumption: 104 g/h.EN417 Connection.

1 x Faithfull Butane Propane Mix Gas Cartridge 350g

1 x Faithfull Butane Propane Mix Gas Cartridge 170g

The Faithfull Multi-Function Gasket Pipe Mitre Shears are designed to cut cleanly and precisely through plastic and rubber. They can be used for cutting rubber gasket, plastic conduit and trunking, window and door seals, decorative trim strips and tile sealing strips. The kit contains a pair of shears with a stainless steel blade and 5 interchangeable aluminium lower jaws. The chrome-plated steel body is fitted with comfortable PVC handle grips and a safety lock. Supplied in a robust plastic storage case with the following jaws: 1 x 17mm 20mm Pipe Cutter Head for cutting plastic conduit. 1 x 27mm Pipe Cutter Head for cutting plastic conduit. 1 x Triangular Head for cutting square conduit and sealing strips. 1 x Slotted Head for general cutting of rubber and plastic gaskets. Max. Cutting Width: 50mm. 1 x Angle Mitre Head for cutting accurate mitres. Marked with 45, 60, 75, 90, 105, 120 angles and graduated to 50mm and 2in.

1 x Faithfull Adjustable Basin Wrench 25 - 50mm

1 x Faithfull Adjustable Basin Wrench 6mm - 25mm

Supplied in a 750gm tub.

Supplied in a 1.5Kg tub.

P18 GAS LEAK DETECTOR is a specially formulated micro porous foam designed specifically to identify even the smallest, gaseous leak. It is suitable for use with most gases and is compatible with paintwork, metals, wood and most plastics. This product is designed to be used to trace costly and potentially dangerous gas leaks *Suitable for most gas types. *Fast and easy to apply.*CFC free. *Directional tube for hard to reach places. *Detecting leaks in pressurised pipe systems.*Suitable for use with most gas types including natural and town gas, compressed air, butane, propane, acetylene, chlorine gas, hydrogen and oxygenSize 400ml

Everbuild EVBP16PIPE is a PVC pipe cement is a non-drip, thixotropic solvent based pipe cement and combines a long open time with a rapid rate of bond strength development. Conforms to BS26209. The Everbuild P16 product is designed specifically for the following applications. Bonding uPVC and ABS non-pressure pipes to themselves and each other, i.e. uPVC soil and ventilating pipes, fittings, and accessories conforming to BS4514; uPVC rainwater piping/goods conforming to BS4576; uPVC underground drainpipes and fittings BS4660; ABS or uPVC waste pipes and fittings conforming to BS55255. Size 250ml

Formerly PROTEX by Purimachos EVERBUILD P14 SYSTEM INHIBITOR is a multi-purpose treatment, specifically designed to protect the entire central heating system from scale, sludge and corrosion. *WRAS Approved formulation.*BuildCert Performance Standard*Compatible with all EVERBUILD central heating products. *Does not contain mineral oil.*compatible with plastic and fibreglass header tanks and with all metals used in central heating systems which includes iron, copper, steel, brass and aluminium. *Suitable for microbore systems constructed from plastic pipes. *New and existing central heating systems.*Extensions to existing systems.