Size 6.0mm (1/4 in)Length 100mm (4 in)

Size 1.5mm (1/16 in).Length 100mm (4 in)

The Priory 271 Automatic Centre Punch aids accuracy through the single handed operation which alleviates the need for a hammer. Depth of impression can be adjusted via the screw cap. Precision manufactured. Specification Length: 125mm (5in)

A set of 6 hexagonal bodied punches with extra long pins. Walleted as a set containing one of each of the following sizes. 1/8in, 5/32in, 3/16in, 7/32in, 1/4in and 5/16in.

Size. 5.5mm (7/32 in).

Size. 4mm (5/32 in).

Size. 4.8mm (3/16 in).

Size. 3.2mm (1/8 in).

Size. 6.4mm (1/4 in).

Walleted set of 9 containing one of each of the following sizes. 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, and 3/8in.

Walleted set of 6 containing one of each of the following sizes. 1/16, 1/8, 3/16, 1/4, 5/16, and 3/8in.

Size 5.5mm (7/32 in).

Size 4.0mm (5/32 in)

Size 8mm (5/16 in).

Size 9.5mm (3/8 in).

Size 3/32in.

Size 4.8mm (3/16 in).

Size 3.2mm (1/8 in).

Size 6.4mm (1/4 in).

Size 1.6mm (1/16 in).

This Priory 129 Combination Scriber is double ended with a point and a knife edge. The knife edge is ideal for marking wood, plastic and laminates, and can also be used for scraping surfaces clean. Its knurled body gives a positive finger grip and the sharp ground points are heat treated to give a long life.Specification: Size: 165mm (6.1/2in).

This Priory 127 Engineers Scriber is a one piece constructed scriber for marking all metal. Its knurled body gives a positive finger grip and the sharp ground points are heat treated to give a long life.Specifications: Size: 125mm (5 in).

Specifications:Tip: 9.5mm (3/8in).Length: 150mm (6in).

This Priory Scriber has two points, one bent at 90 degrees giving improved access in confined spaces. It has a knurled body to give a positive finger grip and sharp ground points heat treated to give a long life. Specification: Length: 177mm (7in).

Size 2.5 x 115mm (3/32 x 4 1/2 in)

Size 5 x 125mm (3/16 x 5 in)

Size 3 X 115mm (1/8 x 4 1/2 in)

Size 4 x 125mm (5/32 x 5 in).

Size 2.5 x 115mm (3/32 x 4 3/4 in).

Size 5 x 125mm (3/16 x 5 in).

Size 3 x 115mm (1/8 x 4 3/4 in).

Size 6.5 x 140mm (1/4 x 5 1/2 in)

An extremely handy pocket sized reference booklet of data charts and tables for the drawing office, toolroom or workshop. This metric revision publication is produced by Zeus Precision Charts Ltd, who are members of the British Standards Institution. The 28 laminated pages contain data on standard drill sizes and decimal equivalents, tapping drills and clearances for metric and imperial threads, BS4500 tolerances, hardness comparisons, jig boring co-ordinates for equally spaced holes, allowances for sheet metal bending and Morse tapers. Also, long tables for sine, cosine, tangents and cotangents.

This Stuarts Micrometer Engineers Blue is used in marking out in the workshop/garage for locating high spots on steel surfaces when checking valve seats, and has many other uses. It gives a clear perfect mark on any metal in any light, and being a lubricant cannot damage bearings or other working parts. Size: 38g.

Replacement Reaming Blades for the Milwaukee 48224255 Reaming Pen.

The Milwaukee Hand Tools Reaming Pen provides easy deburring of copper tubing and PVC. The all-metal design provides added durability for demanding job site use. The blade is heat-treated with a black oxide coated finish for extended life. A slide resistant clip allows easy storage in the user's pocket or tool bag for quick access.

The Moore Wright ELS Engineer's Levels have the following specification: Length: 165mm (6.5in).Width: 34mm (1.34in).Height: 46mm (1.81in).Resolution: 0.3mm per metre (0.0035in per foot).

The Moore Wright ELM Engineer's Levels has the following specification: Length: 300mm (12in).Width: 36mm (1.42in).Height: 58mm (2.28in).Resoultion: 0.3mm per metre (0.0035in per foot).

The Moore Wright CSRME24 is a 600mm/24in rule is perfect for use with the combination sets and is graduated on both sides. Measurements: Metric Graduations: in 0.5mm, numbered every 10mm. Imperial Graduations: 32nds and 64ths numbered every 1/8in. PLEASE NOTE This is ONLY the Rule.

The Moore Wright CSRM600 is a 600mm rule is perfect for use with the combination sets and is graduated on both sides. Measurements: mm and 0.5mm on both sides; numbered every 10mm. PLEASE NOTE This is ONLY the Rule.

The Moore Wright CSME12 Precision Combination Set is a full set including 300mm/12in rule (graduated both sides), Protractor head, Square head and Centre head. Measurements: Metric graduations: in 0.5mm, numbered every 10mm. Imperial graduations: 32nds and 64ths numbered every 1/8in.

The Moore Wright CSM300 Precision Combination Set is a full set including 300mm rule (graduated both sides), Protractor head, Square head and Centre head. Measurements: mm and 0.5mm on both sides; numbered every 10mm.

The Moore Wright Safe Sure Feeler Gauge with hardened, tempered and polished blades. The nominal thickness is marked on each blade. Ideal for general workshop use.The 911 Safe Sure Feeler Gauge Set has the following specification: Length: 4inWidth: 0.5inLocking Screw: NoNo. of Blades: 10

The Moore Wright Internal Micrometer 903M Internal Micrometer has the following specification: Range: 50-310mm.Head Range: 10mm.

The Moore Wright Internal Micrometer 903 Internal Micrometer has the following specification: Range: 2-12in.Head Range: 0.50in.

The Moore Wright Internal Micrometer 902M Internal Micrometer has the following specification: Range: 50-210mm.Head Range: 10mm.

The Moore Wright Internal Micrometer 901M Internal Micrometer has the following specification: Range: 25-55mm.Head Range: 5mm.

The Moore Wright Internal Micrometer 901 Internal Micrometer has the following specification: Range: 1-2in.Head Range: 0.25in.

The Moore Wright 891 Series Adjustable Depth Micrometer features interchangeable depth rods, with a 4mm diameter. These adjustable depth micrometers conform to BS6468:1984. Base Length: 63.5mm / 2.1/2in. The Moore Wright 891M150 Adjustable Depth Micrometer has the following specification: Range: 0-150mm.Resolution: 0.01mm.

The Moore Wright 890M Fixed Type Depth Micrometer has a fixed depth rod with a 6.5mm diameter. It is fitted with a 'speeder' type ratchet and a lock screw for added user convenience. Conforms to BS 6468:1984. Specification: Base Length: 63.5mm (2.1/2in)Range: 0-25mmResolution: 0.01mm

The Moore Wright 56R Spring Joint Jenny Caliper is manufactured from polished tool steel and the marking leg has been hardened to over 550Hv at the point. It is fitted with a bow spring that ensures uniform tension over the working range and a centrally mounted adjustment screw that offers finer setting than firm joint type. Also known as Hermaphrodite calipers. Size: 150mm (6in).

The Moore Wright 528 Spring Joint External Calipers have the following specification: Size: 200mm (8in).

The Moore Wright 526R Spring Joint External Calipers have the following specification: Size: 150mm (6in).

The Moore Wright 524R Spring Joint External Calipers have the following specification: Size: 100mm (4in).

The Moore Wright 5212 Spring Joint External Calipers have the following specification: Size: 300mm (12in).

The Moore Wright MW521-01 Combination Set is supplied with three measuring heads (square, protractor and centre) which can be attached to the stainless-steel ruler, allowing versatile measurements and marking on various types of workpieces.The stainless-steel rule has engraved graduations; one side metric, one side imperial with hardened and ground slide ways. Range: 180.Length: 300mm (12in).

The Moore Wright 5210 Spring Joint External Calipers have the following specification: Size: 250mm (10in).

The Moore Wright 518 Spring Joint Internal Caliper has the following specification: Size: 200mm (8in).

The Moore Wright 516R Spring Joint Internal Caliper has the following specification: Size: 150mm (6in).

The Moore Wright 514R Spring Joint Internal Caliper has the following specification: Size: 100mm (4in).

The Moore Wright 513R Spring Joint Internal Caliper has the following specification: Size: 75mm (3in).

The Moore Wright 5112 Spring Joint Internal Caliper has the following specification: Size: 300mm (12in).

The Moore Wright 5110 Spring Joint Internal Caliper has the following specification: Size: 250mm (10in).

The Moore Wright 508 Spring Dividers have the following specifications: Size: 200mm (8in).

The Moore Wright 506 Spring Dividers have the following specifications: Size: 150mm (6in).

The Moore Wright 504 Spring Dividers have the following specifications: Size: 100mm (4in).

The Moore Wright 503 Spring Dividers have the following specifications: Size: 75mm (3in).

The Moore Wright 5012 Spring Dividers have the following specifications: Size: 300mm (12in).

The Moore Wright 5010 Spring Dividers have the following specifications: Size: 250mm (10in).

The Moore Wright MW500-01 Universal 360 Bevel Protractor is made from high quality hardened, ground stainless steel, and has a high precision satin chromed scale.It is fitted with a magnifying glass for easy reading with a fine adjustment and height gauge attachment. They have minimum reading time of 5 minutes - this is a visual angle of 5 arc minutes (1 arc min = 1/60 of a degree). Comes with a 300mm (12in) and 150mm (6in) rule and is packed as set in a plastic box.

The Moore Wright MW496-01 Magnetic Snake Stand has a corrosion resistant chrome plated flex arm that will hold rigidly in almost any position. The V-shaped base is perfect for mounting on rounded surfaces. There is a powerful magnetic base that can be turned on and off depending on the user requirements and the magnetic force is equal to 40kg/85lbs.

The Moore Wright MW475-01 Magnetic Indicator Stand features fine adjustment and accepts dial test indicators, digital indicators, and normal indicators. It is a universal model which can be used for indicators with or without a lug style back plate. The stand's powerful magnetic base can be turned on and off depending on the user requirements, and there is a magnetic force of 80kg/175lbs.

The Moore Wright 44M Protractor Type Depth Gauge Metric/Imperial has the following specifications: Size of Base: 79mm.Width: 5.5mm.Thickness: 1.0mm.Length of Blade: 195mm. Metric Scale Graduations : Front Face: 0.5mm and 1.0mm, Rear Face: 1.0mm.

The Moore Wright 44 Protractor Type Depth Gauge Metric/Imperial has the following specifications: Size of Base: 79mm/3.11in.Width: 5.5mm/0.22in.Thickness: 1.0mm/0.04in.Length of Blade: 195mm/7.68in. Metric/Imperial Scale Graduations : Front Face: 1/32nd, Rear Face: 1.0mm.

The Moore Wright 43M Reversible Base Depth Gauge has the following specification: Size of Base: 18/56mm.Width: 5.5mm.Thickness: 1.0mm.Length of Blade: 195mm. Metric Scale Graduations : Front Face: 0.5mm and 1.0mm, Rear Face: 1.0mm.

The Moore Wright 43 Reversible Base Depth Gauge has the following specification: Size of Base: 18/56mm, 0.71/2.21in.Width: 5.5mm/0.22in.Thickness: 1.0mm/0.04in.Length of Blade: 195mm/7.68in. Metric/Imperial Scale Graduations : Front Face: 1/32nd, Rear Face: 1.0mm.

The Moore Wright MW420-03I Dial Test Indicator has the following specification: Range: 0.030in.Resoultion: 0.0005in.Dial Reading: 0-15-0.Dial Diameter: 1in.

The Moore Wright MW420-03 Dial Test Indicators has the following specification: Range: 0.8mm.Resoultion: 0.01mm.Dial Reading: 0-40-0.Dial Diameter: 25mm.

The Moore Wright 401 Series Dial Indicator has an aluminium body and a tungsten carbide measuring tip. It has an adjustable bezel with stop screw and features tolerance indicators. Manufactured to ANSI B89.1.10 standard. Specifications:Range: 0-0.5in.Resolution: 0.001in.Bezel diameter: 58mm.Stem diameter: 10mm

The Moore Wright 4006 Engineers Square Grade B 150mm (6in) has the following specification: Blade Size: 181.0 x 25.4mm.Stock Size: 101.6 x 25.4mm.Inner Working: 82.4 x 155.6mm.

The Moore Wright 400 Series Dial Indicator has a satin-chromed body with a tungsten carbide measuring contact and a double dial indicator for measuring mm stroke. The design is shockproof in case of accidental knocks. The scale can be adjusted with the stop screw. The 400 Series Dial Indicator is manufactured to DIN 878 standards. Supplied foam packaging. Range: 0-10mm.Resolution: 0.01mm.Dial Diameter: 58mm.Stem diameter: 8mmType: Ear Back.

The Moore Wright 341R Firm Joint Jenny Caliper has the following specification: Size: 125mm (5in).

The Moore Wright 336-6R Firm Joint Jenny Caliper has the following specification: Size: 150mm (6in).

The Moore Wright 3318 Firm Joint Outside Calipers have the following specification: Size: 200mm (8in).

The Moore Wright 3316R Firm Joint Outside Calipers have the following specification: Size: 150mm (6in).

The Moore Wright 33124 Firm Joint Outside Calipers have the following specification: Size: 600mm (24in).

The Moore Wright 33118 Firm Joint Outside Calipers have the following specification: Size: 450mm (18in).

The Moore Wright 33112 Firm Joint Outside Calipers have the following specification: Size: 300mm (12in).

The Moore Wright 3308 Firm Joint Inside Caliper has the following specification: Size: 200mm (8in).

The Moore Wright 3306R Firm Joint Inside Caliper has the following specification: Size: 150mm (6in).

The Moore Wright 33012 Firm Joint Inside Calipers have the following specification: Size: 300mm (12in).

The Moore Wright MW279-01A Micrometer Stand is designed for micrometers up to 100mm (4in). It has a painted cast iron base with plastic covered clamping jaws and the angle of the jaws can be adjusted.

The Moore Wright 200 Series Digital External Micrometer has a tapered design that provides easier access to difficult areas and a hammertone finished frame with a high quality insulated grip. It also has tungsten carbide measuring faces and a constant force ratchet on the thimble. The large LCD display allows for 4 types of measurement (mm/inch conversion and Absolute/Incremental reading) and a zero setting. The micrometers are manufactured to DIN 863 standards. Specification Range: 0-25mm/0-1in.Resolution: 0.001mm/.00005in.

The Moore Wright 200 Series MW200-01 Analogue External Micrometer has a hammertone finish frame with an insulated grip, a satin chrome scale and tungsten carbide measuring faces. It has a tapered design for easier access to difficult areas. The micrometer has an adjusting key, locking lever and a constant force ratchet for ease of use. It is manufactured to DIN 863/1 standards, and supplied in plastic case. Specification; Range: 0-25mm.Resolution: 0.01mm.Accuracy: 0.004mm.

The 1966M/50 Traditional External Micrometer has the following specification: Micrometer Range: 25-50mm.Measuring Faces: Flatness: 0.001mm, Parallelism: 0.003mm, Accuracy: 0.003mm.Resolution: 0.01mm.

The 1966/2 Traditional External Micrometer has the following specification: Micrometer Range: 1-2in.Measuring Faces: Flatness: 0.00005in, Parallelism: 0.0001in, Accuracy: 0.0001in.Resolution: 0.001in.

The 1965M Traditional External Micrometer has the following specification: Micrometer Range: 0-25mm.Measuring Faces: Flatness: 0.001mm, Parallelism: 0.003mm, Accuracy: 0.003mm.Resolution: 0.001mm.

The 1965 Traditional External Micrometer has the following specification: Micrometer Range: 0-1in. Measuring Faces: Flatness: 0.00005in, Parallelism: 0.0001in, Accuracy: 0.0001in.Resolution: 0.001in.

The Moore Wright Traditional External Micrometer has a pearl chrome plated frame with insulation pads, tungsten carbide measuring faces and a tapered bow frame. The 'speeder' type ratchet, locking lever and adjusting key make this micrometer easy to use. It has a 6.5mm spindle diameter. The micrometers are manufactured to BS870, DIN 863/1, ISO 361 standards. Supplied in plastic pocket case. The 1961M Traditional External Micrometer has the following specification: Micrometer Range: 0-25mm. Measuring Faces: Flatness: 0.001mm, Parallelism: 0.003mm, Accuracy: 0.003mm.Resolution: 0.01mm.

The MAW11030DBL calipers have the following specifications: Range: 0-300mm (0-12in).Resolution: 0.01mm (0.005in).Jaws: 60mm.