The MAW11020DBL calipers have the following specifications: Range: 0-200mm (0-8in).Resolution: 0.01mm (0.005in).Jaws: 50mm.

The Moore Wright Water Resistant Series Digital Calliper are fitted with a patented ceramic capacitive sensor and a large LCD display offering 4-way measurement (mm/inch, absolute/incremental). They can be zeroed at any point on the scale and are fitted with a conveniently located on/off switch. The callipers are manufactured to DIN 862 standards, and are water and dust resistant to IP54 specifications. Supplied with a CR2032 battery. Specification:Range: 0-150mm (0-6in).Resolution: 0.01mm (0.0005in).Jaws: 40mm.

The Moore Wright DPC Series Digital Calliper has a polycarbonate frame and offers 4-way measurement (mm/inch, absolute/incremental) with an accuracy of 0.2mm/0.008in. The calliper can be zeroed at any point on the scale.Supplied with a CR2032 battery and a vinyl pouch. Specification:Range: 0-150mm (0-6in).Resolution: 0.01mm (0.0005in).Jaws: 40mm.

The Moore Wright DFC Series Digital Callipers are fitted with an extra-large, easy-to-read display. The callipers have a high measuring speed of 120in per second and you can read/convert measurements in inch, metric and fractions. The frame is made from stainless steel and provides extra smooth movements when measuring. Supplied with a CR2032 battery. Specification;Range: 0-150mm (0-6in).Resolution: 0.01mm (0.0005 / 1/128 in).Jaws: 40mm.

The MAW11015DBL calipers have the following specifications: Range: 0-150mm (0-6in).Resolution: 0.01mm (0.005in).Jaws: 40mm. Supplied retail packed and in a plastic pouch.

The MAW10030BI calipers have the following specifications: Range: 0-300mm (0-12in).Resolution: 0.02mm (0.001in).

The MAW10020BI calipers have the following specifications: Range: 0-200mm (0-8in).Resolution: 0.02mm (0.001in).

The MAW10015BI calipers have the following specifications: Range: 0-150mm (0-6in).Resolution: 0.02mm (0.001in).

Set contains: 5,6,8,10,12.5,16,20,25 and 32mm sizes.

Set contains: 1/4, 5/16, 3/8, 7/16, 1/2, 5/8, 3/4, 7/8 and 1in sizes.

Size 1200 x 50 x 6mm (48 x 2 x 1/4in).

Size: 900 x 50mm (36 x 2in).

1 x Maun Carbon Steel Straight Edge 76cm (30in)

1 x Maun Carbon Steel Straight Edge 60cm (24in)

1 x Maun Carbon Steel Straight Edge 45cm (18in)

1 x Maun Carbon Steel Straight Edge 30cm (12in)

1 x Maun Carbon Steel Straight Edge 100cm (40in)

High-performance ceiling magnet designed to hold onto the metal grids on suspended ceilings and hold promotional signs in shops. Specification Diameter: 40mm (1.9/16in)Height: 12mm (15/32in)Max. Pull: 4kg

E-Magnets Neodymium pot magnets combine the power of a neodymium magnet with the durability of a mild steel shell. They offer exceptional performance, especially through larger air gaps.The magnets have a 4mm tapped hole in the back for mounting and are supplied with a removable steel hook. Maximum operating temperature: 100C. The E-Magnets 605 Neodymium Deep Pot Magnet has the following specifications: Diameter: 15mm (19/32 inch). Height: 15mm (19/32 inch). Maximum Pull: 5kg (11 lb).

This set of Irwin 7 Power Grip Screw Extractors have reverse spiral flutes for maximum gripping power. The universal shape fits metric, and fractional sizes. Featuring a 1/4in hexagon shank suitable for use with power drills and nut drivers. They will easily extract rounded off, rusted tight and painted over bolts, made from durable high carbon steel for a longer life. Sizes: 8mm, 10mm, 11mm, 3/16in, 1/4in, 5/16in, 3/8in, 7/16in, 1/2in.Drive Size: 1/4in.Supplied in a durable plastic case.

This Irwin Bolt Fastener Remover Expansion 5-piece set is used for removing rounded, rusty or painted bolts. It has a unique reverse spiral flute design which securely grips and removes stubborn nuts and bolts. They can be used with a hand ratchet 3/8 inch square drive and has hexagon flats for use with a spanner or adjustable wrench. Universal lobular design for all types of fasteners.Sizes: 5/16in (8mm), 10mm, 13mm, 11/16in, 3/4in (19 mm).

This Irwin Bolt Grip Fastener Remover 5 Piece Base Set is ideal for removing rounded, rusty or painted bolts. It has a unique reverse spiral flute design which securely grips and removes stubborn nuts and bolts. They can be used with a hand ratchet 3/8inch square drive and has hexagon flats for use with a spanner or adjustable wrench. They are made of high carbon steel for long life and durability. Sizes: : 3/8in, 7/16in (11mm), 1/2in, 9/16in (14mm), 5/8in (16mm).Supplied in a carrying case.

Diameter of cut 7 - 20mm (9/32 - 3/4 in).

Diameter of cut 5 -13mm (13/64 - 33/64 in)

The Halls HB12 Handiburr Rethreader has the following specification: Size: M4 x 0.7.

The Halls HB11 Handiburr Rethreader has the following specification: Size: M3.5 x 0.6.

Diameter 12.4mm (31/32 in).

The Halls 21 Piece Tap Kit is supplied in a durable metal tin with metal hinges. Each tap is labelled for easy identification. Containing 3 x of each: M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1, M8 x 1.25, M10 x 1.5 and M12 x 1.75.

This Facom 11 piece shock absorbing punch set contains drift, nail and centre punches. Contains: 6 x Drift punches 2, 3, 4, 5, 6 and 8mm.4 x Nail punches 4, 5, 6 and 8mm.1 x Centre punch 6mm.

1 x Facom 804.SL Round Tip Feeler Gauge, Long Blade

The Facom 249.GJ7 7-piece set consists of 7 sheathed impact tools/drift punches. The punches are tough and durable. With very high tensile strength, they feature a head hardened to 43 HRc and a long shank hardened to 58 HRc. The handles are ergonomically shaped for comfort and shock absorption. Ideal as an aid in aligning bolt or rivet holes prior to inserting a fastener. This set contains:1 x 249.G2 punch - 2mm x 140mm.1 x 249.G3 punch - 3mm x 150mm.1 x 249.G4 punch - 4mm x 190mm. 1 x 249.G5 punch - 5mm x 200mm.1 x 249.G6 punch - 6mm x 210mm.1 x 249.G8 punch - 8mm x 216mm.1 x 249.G10 punch - 10mm x 230mm.

The FCM249G8 Sheathed Punch has the following specifications:Point diameter: 7.90mm.Length: 216mm.

The FCM249G6 Sheathed Punch has the following specifications:Point diameter: 5.90mm.Length: 210mm.

The FCM249G5 Seathed Punch has the following specifications:Point diameter: 4.95mm.Length: 200mm.

The FCM249G4Point diameter: 3.95mm.Length: 190mm.

The FCM249G3 Sheathed Punch has the following specifications:Point diameter: 2.95mm.Length: 150mm.

The FCM249G2 Sheathed Punch has the following specifications:Point diameter: 1.95mm.Length: 140mm.

The FCM249G16 Sheathed Punch has the following specifications:Point diameter: 15.70mm.Length: 310mm.

The FCM249G14 Sheathed Punch has the following specifications:Pointed diameter: 13.80mm.Length: 290mm.

The FCM249G12 Sheathed Punch has the following specifications:Point diameter: 11.80mm.Length: 280mm.

The FCM249G10 Sheathed Punch has the following specifications:Point diameter: 9.80 mm.Length: 230mm.

The Faithfull three piece set of hand tap wrenches designed for use in hand tapping and reaming operations. Each wrench features a heavy-duty ductile steel body with a knurled chuck cap. A four point clamping system helps to increase the range of tap sizes that can be used and provide a firm non slip grip for accurate control.Three sizes cover the following metric and imperial size taps:M1-M4 1/16in - 5/32inM4-M6 5/32in - 1/4inM6-M12 1/4in - 1/2in

The Faithfull FAITWRM6M10 has the following specifications:Tap size capacity: M6 - M10

The Faithfull FAITWRM4M6 has the following specifications:Tap size capacity: M4 - M6

The Faithfull FAITWRM4M10S tap wrench ratchet set comes complete with interchangeable chucks and tommy bars with the following specifications:Tap size capacity: M4 - M10Small chuck capacity: M4 - M6Large chuck capacity: M6 - M10180mm tommy bar100mm tommy bar

Tap size capacity: M7 - M27

Tap size capacity: M4 - M8

Tap size capacity: M4 - M14

Faithfull Trammel Heads are used to draw circles and measure sizable distances with the accuracy of a divider. Also for layout, marking templates and drawing large circles. The trammel heads clamp on to any wood or metal bar up to 31mm wide. They feature needle point legs and one trammel can also hold a pencil.

Size: 70mm (2.3/4in).

Size: 44mm (1.3/4in).

Size: 30mm (1.1/4in)

Manufactured from high quality C45 carbon steel, this Faithfull tap and die set is suitable for cleaning and cutting threads in mild steel, aluminium and brass. Each set contains a tap wrench, die holder, screwdriver and a range of metric taps and dies, featuring the most commonly used European threads. The Faithfull FAITAPDSET39 39 piece metric tap die set contains the following: 1 x Tap wrench: M3-121 x Die stock holder: 25mm (1 inch)1 x Screwdriver1 x Screwpitch1 x Tap wrench16 x Metric Taps: 3x0.5mm, 3x0.6mm, 4x0.7mm, 4x0.75mm, 5x0.8mm, 5x0.9mm, 6x0.75mm, 6x1.0mm, 7x0.75mm, 7x1.0mm, 8x1.0mm, 8x1.25mm, 10x1.25mm, 10x1.5mm, 12x1.5mm, 12x1.75mm1 x Tap: 1/8 inch NPT16 x Metric Dies (same sizes as metric taps)1 x Die: 1/8 inch NPT.

Manufactured from high quality C45 carbon steel, this Faithfull tap and die set is suitable for cleaning and cutting threads in mild steel, aluminium and brass. Each set contains a tap wrench, die holder, screwdriver and a range of metric taps and dies, featuring the most commonly used European threads. The Faithfull FAITAPDSET21 21 piece metric tap die set contains the following: 1 x Tap wrench: M3-121 x Die stock holder: 25mm (1 inch)1 x Screwdriver8 x Metric Taps: 3 x 0.5mm, 4 x 0.7mm, 5 x 0.8mm, 6 x 1.0mm, 7 x 1.0mm, 8 x 1.25mm, 10 x 1.5mm and 12 x 1.75mm.1 x Tap: 1/8 inch NPT8 x Metric Dies (same sizes as metric taps)1 x Die: 1/8 inch NPT.

The Faithfull Double Ended Scriber is a useful pocket sized scriber with a hardened steel reversible point. Scribes and scores most metal surfaces. Compact size makes it useful for working in confined spaces. Includes pocket storage clip. Length: 110mm (4.1/3in).

The Faithfull Double Ended Scriber is a dual use scriber it has a knife edge at one end and is pointed at the opposite end. The knife edge is ideal for scoring wood, plastics and laminates. It is also called a striking knife. Specification: Length: 165mm (6.1/2in).

The Faithfull Double-Ended Scriber has a knurled body to provide a positive grip. The two sharp ground points are heat-treated to retain their edge. One point is set at right angle increasing flexibility for marking and scoring. Specification: Length: 186mm (7.1/3in).

The Faithfull 4 Piece Screw Extractor Kit easily removes even the most damaged and hard to remove screws and bolts. The bits have a self-centring tip and are manufactured from hardened tool steel and double tempered for extra hardness. They will remove screws from wood, metal or plastic, or screws manufactured from any alloy including soft brass and free-spinning screws. Works on the following types of screw and bolts: Pozidrive, Phillips, Flat, Hex and Star Headed, even jagged and uneven breaks. They can be used with most power drills. Sizes: 1, 2, 3 and 4.

Size: Set 8 1.5, 2.5, 3, 4, 5, 6, 8 and 10 mm

The set of eight punches include one of each of the following.1.5mm , 2.5mm , 3.0mm , 4.0mm , 5.0 mm , 5.5mm , 6.0mm and 8mm Length: 100mm (4 in)

Size: 4.0mm (5/32 in)

Tip Diameter: 4mm (5/32in).Length: 100mm (4in).

Size: 2.4mm (3/32 in)

Tip Diameter: 2.5mm (3/32in).Length: 100mm (4in).

Size: 4.8mm (3/16in)

Tip Diameter: 5mm (3/16in).Length: 100mm (4in).

Size: 3.2mm (1/8 in)

Tip Diameter: 1.5mm (1/16in).Length: 100mm (4in).

The Faithfull FAIPITCHMW Screw Pitch Gauge 52 Metric Whitworth is a handy gauge which quickly determines the pitch of various screw threads.The high-quality polished tool steel leaves are clearly marked with size and there is a locking device at both ends to securely lock the leaves. Specifications: Number of Leaves: 52.Whitworth Standard 55 Degree Threads.Metric Standard 60 Degree Threads.

The Faithfull FAIPITCHMA Screw Pitch Gauge is a handy gauge which quickly determines the pitch of various screw threads.The high-quality polished tool steel leaves are clearly marked with size and a locking device at both ends to securely lock the leaves. Specifications: Number of Leaves: 55.US National 60 Degree Threads: 4-42 tpi.Metric 60 Degree Threads: 0.25-6.0mm.

Set of four: one of each size 1, 2, 3 4.Capacity: 1) 0 -1mm2) 0.75 - 1.5mm3) 1.5 - 3mm4) 3 - 4.5mm

Size: 3Capacity: 1.5 - 3mm (1/16 - 1/8 in)

Size: 2Capacity: 0.75 - 1.5mm (1/32 - 1/16)

Size: 1Capacity: 0 - 1mm (0 - 3/64 in)

The Faithfull pin chuck is a useful accessory for holding drills too small to be held by standard capacity drill chucks. Supplied with three collets of the following sizes: 1 x 0 - 0.75mm (0 - 1/32in). 1 x 0.75 - 1.5mm (1/32 - 1/16in). 1 x 1.5 - 2.5mm (1/16 - 3/32in).

The Faithfull useful set of picks and hooks manufactured from stainless steel. The set contains 3 single end picks and 3 double end hooks. Suitable for pin or clip picking and the removal of seals and O-rings and many other applications. Approximate lengths 140mm - 165mm. Supplied in a plastic pouch.

Point Diameter: 4.0mm (5/32in)Length: 100mm (4in)

Point Diameter: 2.5mm (3/32in)Length: 100mm (4in)

Point Diameter: 5mm (3/16in)Length: 100mm (4in)

Point Diameter: 3mm (1/8in)Length: 100mm (4in)

Point Diameter: 1.5mm (1/16in)Length: 100mm (4in)

Size : 8mm (5/16 in).

Size : 6mm (1/4 in).

Size : 5mm (3/16 in).

Size : 4mm (5/32 in).

Size : 3mm (1/8 in).

Size : 2mm (5/64 in).

Size : 12mm (1/2 in).

Size : 10mm (3/8 in).

The Faithfull Prestige Mitre Saw Protractor is a modern and accurate way to measure internal and external wall angles. This measurement is commonly used to transfer angles to mitre saws but could also be used as a datum point for hand cutting. Manufactured using CNC machining from heavy-duty aluminium. It is then black anodised for protection and laser etched for accuracy.

The Faithfull Magnetic Square Welding Clamp enables fast and accurate holding of ferrous metals for welding and assembly. The clamp contains a strong magnet and features angled edges for precise alignment of metal workpieces. It will securely hold round and square tubing, angle and flat stock. Through-holes enable multiple clamps to be fixed together when working on larger projects. Ideal for use by welders and fabricators. Achievable Angles: 45, 90 135Pull Power: 20kgSize: 100 x 95 x 19mm

The Faithfull Magnetic Multi-Angle Welding Clamp enables fast and accurate holding of ferrous metals for welding and assembly. The clamp contains a strong magnet and features angled edges for precise alignment of metal workpieces. It will securely hold round and square tubing, angle and flat stock. Through-holes enable multiple clamps to be fixed together when working on larger projects. Ideal for use by welders and fabricators. Achievable Angles: 30, 45, 60, 75, 90, 105, 120 135Size: 100 x 65 x 14mm

The Faithfull Adjustable Magnetic Welding Clamp, also known as an 'adjustable links magnet', is a type of welding clamp where each magnet can be completely rotated. The 2 magnets can be adjusted to hold ferrous metal workpieces at any angle by tightening/loosening the wing nuts. The compact size allows it to be used in confined spaces. Ideal for use by welders and fabricators. Magnetic Block Size: 50 x 25mmOverall Size: 114 x 25 x 50mm

Diameter: 80.0mmHeight: 9.5mmPull Power: 25.0kg

Diameter: 70.0mmHeight: 6.35mmPull Power: 15.0kg

Diameter: 50.8mmHeight: 8.0mmPull power: 10.0kg

Diameter: 44.5mmHeight: 6.35mmPull Power: 9.0kg

Faithfull traditional horseshoe shaped magnets made from Alnico for high resistance to corrosion, which will operate at temperatures up to 500C. The magnets have a north and south pole and can be used to easily check whether items are ferrous or not. Ideal for use in education, experiments and science projects.Size: 27mmPull Power: 3.5kg

Diameter: 35.0mmHeight: 30.0mmPull Power: 10.5kgHole thread: M6

Diameter: 27.0mmHeight: 25.4mmPull Power: 5.0kgHole Thread: M6