Diameter: 20.5mmHeight: 19.5mmPull Power: 4.0kgHole Thread: M6

Diameter: 17.5mmHeight: 16mmPull Power: 2.5kgHole Thread: M6

Diameter: 32.5mmHeight: 25.4mmPull Power: 4.8kg

Diameter: 25.4mmHeight: 16.0mmPull Power: 3.2kg

Diameter: 19.0mmHeight: 12.7mmPull Power: 1.8kg

Diameter: 12.5mmHeight: 9.5mmPull Power: 0.7kg

Size : 8mm (5/16 in).

Size : 6mm (1/4 in).

Size : 5mm (3/16 in).

Size : 4mm (5/32 in).

Size : 3mm (1/8 in).

Size : 2mm (5/64 in).

Size : 12mm (1/2 in).

Size : 10mm (3/8 in).

Size: M8Thread: 1.25Drill Size: 6.9mm

Size: M6Thread: 1.0Drill Size: 5.2mm

Size: M5Thread: 0.8Drill Size: 4.3mm

Size: M4Thread: 0.7Drill Size: 3.4mm

Size: M3Thread: 0.5Drill Size: 2.5mm

Size: M12Thread: 1.75Drill Size: 10.5mm

Size: M10Thread: 1.5Drill Size: 8.7mm

Size: M4Thread: 0.7

Size: M3Thread: 0.5

Made from heavy gauge stainless steel, and used for measuring the gauges of steel wire and hot and cold rolled sheet steel. Metric dimensions are recorded on one side and SWG (Standard Wire Gauge) marking on the other. SWG - mm - inches 36 - 0.19 - 0.0076 35 - 0.21 - 0.0084 34 - 0.23 - 0.0092 33 - 0.25 - 0.01 32 - 0.27 - 0.0108 31 - 0.30 - 0.0116 30 - 0.32 - 0.0124 29 - 0.35 - 0.0136 28 - 0.38 - 0.0148 27 - 0.42 - 0.0164 26 - 0.46 - 0.018 25 - 0.51 - 0.02 24 - 0.56 - 0.022 23 - 0.61 - 0.024 22 - 0.71 - 0.028 21 - 0.81 - 0.032 20 - 0.91 - 0.036 19 - 1.02 - 0.04 18 - 1.22 - 0.048 17 - 1.42 - 0.056 16 - 1.63 - 0.064 15 - 1.83 - 0.072 14 - 2.03 - 0.08 13 - 2.34 - 0.092 12 - 2.64 - 0.104 11 - 2.95 - 0.116

The Faithfull handy pocket-sized Multi-Purpose Angle Protractor is manufactured from stainless steel. It can be used as a 100mm measuring rule, also functioning as a protractor, a square, a centre finder, a circle divider and a drill point gauge. Specification: Blade Length: 100mm.

The Faithfull Depth Gauge with Protractor is a versatile tool allowing the angle and depth to be measured simultaneously. The protractor features deep etched graduations 0 - 180 in opposite directions permitting the reading of both the direct and supplementary angles.The rule is graduated in both imperial and metric dimensions up to 150mm (6in) and a knurled thumb nut allows the rule to be locked at the chosen angle. Specifications: Blade Length: 150mm (6in).Graduations: 0.5mm or 64ths.

The Faithfull Prestige Angle Gauge is manufactured from aluminium using computer numerical controlled (CNC) machines. The black anodised finish offers enhanced corrosion protection and the laser engraved scales give outstanding measurement accuracy. The protractor features laser etched graduations from 0-180. It is used to determine existing angles, as well as creating new angles, setting bevels and transferring angles from one surface to another. A knurled thumb-nut allows the rule to be locked at a chosen angle.

This compact set of engineering tools contains 6 essential marking and measuring tools. Supplied in a wooden storage case, the set contains the following tools: Faithfull FAIESMEASURE Engineers Marking Measuring Set 6 Piece comprises:3 x Precision Stainless Steel Squares 50mm (2in), 100mm (4in), 150mm (6in), accurate to BS939 Grade B standard.1 x Steel Centre Finder 38mm capacity.1 x Stainless Steel Rule 150mm (6in).1 x Scriber 135mm (5¼in).

The Faithfull Stainless Steel Marking and Measuring Set provides the user with all the basic tools to enable them to measure and mark sheet metal for a precise fit. Made from high-quality stainless steel for durability and accuracy. Widely used by metal workers, machinists and hobbyists. Contents: 1 x Divider 152mm (6in), 1 x Steel Rule 152mm (6in), 1 x Carbide Scribe 152mm (6in), 1 x Automatic Centre Punch and 1 x Square 127mm (5in)

Size: 225mm (9in) External size: 262 x 160mmInternal size: 235 x 129mmStock thickness: 18mmBlade thickness: 2mm

Size: 100mm (4in) External size: 120 x 75mmInternal size: 100 x 56mmStock thickness: 8.5mmBlade thickness: 1.7mm

Size: 75mm (3in) External size: 95 x 60mmInternal size: 75 x 41.5mmStock thickness: 8.5mmBlade thickness: 1.7mm

Size: 50mm (2in) External size: 70 x 50mmInternal size: 50 x 31mmStock thickness: 8.5mmBlade thickness: 1.7mm

The Faithfull Triangular Engineer's Hand Scraper especially developed for removing high spots on machined surfaces. It is manufactured from selected steel and is suitably hardened and lightly tempered for lasting durability. It has a shaped round wooden handle for comfort during use.

The Faithfull Half Round Engineer's Hand Scraper has been especially developed for removing high spots on machined surfaces. It is manufactured from selected steel and is suitably hardened and lightly tempered for lasting durability. It has a shaped round wooden handle for comfort during use. Size: 200mm (8in).

The Faithfull Engineer's Flat Hand Scraper has been specially developed for removing high spots on machined surfaces. It is manufactured from selected steel and is suitably hardened and lightly tempered for lasting durability. It has a shaped round wooden handle for comfort during use.Size: 200mm (8 in)

Size: 50.8mm (2 in)

Size: 33.5mm (1 5/16 in)

Size: 20.5mm (13/16 in)

Size: 38mm (1 1/2 in)

Size: 25.4mm (1 in)

Square Leg Compasses, when fitted with a standard pencil or other marking implement, can be used for drawing circles and arcs or used as dividers to measure distances or repeat a set distance. Manufactured from forged steel with square section legs for grip and balance, this Faithfull divider has a hardened and ground compass point and knurled grip locking screws. Size: 200mm (8in).

Size 200mm (8 in)

Size 150mm (6 in)

Size 100mm (4 in)

Size 75mm (3in)

Bar Capacity: 75mm.

Bar Capacity: 38mm.

With a measuring capacity of 140mm, this tool can be used on objects with a diameter or width of up to 240mm. Specification: Length: 150mmMeasuring Capacity: 140mm

With a measuring capacity of 90mm, this tool can be used on objects with a diameter or width of up to 180mm. Specification: Size: 100mmMeasuring Capacity: 90mm

The Faithfull Automatic Centre Punch conveniently fits into a pocket like a pen. Designed to release a punch when the head is depressed, and the strike force is adjustable from 5lb to 30lb by rotating the knurled head. It enables the user to make a wide range of graduated markings from light indents to heavy punching without using a hammer. Length: 100mm (4in)

Point Diameter: 4.0mm (5/32 in)Length: 100mm (4 in)

Point Diameter: 2.5mm (3/32in).Length: 100mm (4in).

Point Diameter: 5mm (3/16in).Length: 100mm (4in).

Point Diameter: 3mm (1/8in).Length: 100mm (4in).

Point Diameter: 6mm (1/4in).Length: 100mm (4in).

Point Diameter: 1.5mm (1/16in)Length: 100mm (4 in)

This Faithfull Vernier Caliper is manufactured from hardened stainless steel with dual reading in Imperial to 0.001in and in Metric to 0.02mm. The universal four-way measurement facility enables reading in external, internal, depth and step modes. The sliding thumblock feature easily allows quick and precise measurements to be taken. The satin finished scales and beam ensure fast, easy and accurate readings. Range: 150mm (6in).Graduations: 0.02mm and 0.001in increments.

Size 200mm (8 in)

Size 150mm (6 in)

Size 100mm (4 in)

Size 75mm (3 in)

The Faithfull Fixed joint Jenny Calipers are specifically designed to locate the centre of a round or square section of steel. The leg that holds the adjustable point is offset with the locating lug incorporated in the straight leg. Also known as Hermaphrodite calipers. Range: 150mm (6in).

Size 200mm (8 in)

Size 150mm (6 in)

Size 100mm (4 in)

Size 75mm (3 in)

This Faithfull D.I.Y Vernier Caliper is manufactured from mild steel, with dual reading in imperial and metric. The universal three-way measurement facility enables readings in external, internal, and depth modes.The caliper's sliding thumb-lock feature allows easy, quick, and precise measurements to be taken.The metric and Imperial dual reading comes with a handy locking function, the dual reading comes in 1.0mm and 0.16in increments. Specification: Range: 125mm (5in).

This Faithfull handy pocket-sized caliper is manufactured from a lightweight non-marring carbon fibre material. The digital selection button enables readings to be displayed in either metric or imperial format and will provide precision readings from 0.01mm and 0.0005in. The calipers have an easy-to-read clear liquid crystal display and can perform internal, external and step measurement functions. A convenient pocket clip is provided to help keep the calipers close at hand and safe. Specifications: Measuring range: 0-75mm (0-3in).Resolution: 0.01mm (0.0005in).Accuracy: 0.02mm (0.001in).Auto off: 5 minutes.Display: LCD, character height 8mm.

Size 9mm

Size 8mm

Size 7mm

Size 7/8 in

Size 7/32 in

Size 7/16 in

Size 6mm

Size 5mm

Size 5/8 in

Size 5/32 in

Size 5/16 in

Size 4mm

Size 3mm

Size 3/8 in

Size 3/4 in

Size 3/16 in

Size 30mm

Size 25mm

Size 24mm

Size 22mm

Size 20mm

Size 18mm

Size 1/8 in

Size 16mm

Size 15mm

Size 14mm

Size 1/4 in

Size 13mm

Size 12mm

Size 1/2 in

Size 11mm